new file mode 100644
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8858 Image Sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+ - Nicholas Roth <nicholas@rothemail.net>
+
+description: |
+ The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor
+ controlled through an I2C-compatible SCCB bus. The sensor transmits images
+ on a MIPI CSI-2 output interface with up to 4 data lanes.
+
+properties:
+ compatible:
+ const: ovti,ov8858
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: XVCLK external clock
+
+ clock-names:
+ const: xvclk
+
+ dvdd-supply:
+ description: Digital Domain Power Supply
+
+ avdd-supply:
+ description: Analog Domain Power Supply
+
+ dovdd-supply:
+ description: I/O Domain Power Supply
+
+ powerdown-gpios:
+ description: PWDNB powerdown GPIO (active low)
+
+ reset-gpios:
+ maxItems: 1
+ description: XSHUTDN reset GPIO (active low)
+
+ port:
+ description: MIPI CSI-2 transmitter port
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov8858: camera@36 {
+ compatible = "ovti,ov8858";
+ reg = <0x36>;
+
+ clocks = <&cru SCLK_CIF_OUT>;
+ clock-names = "xvclk";
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clock-rates = <24000000>;
+
+ dovdd-supply = <&vcc1v8_dvp>;
+
+ reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+ };
+...