new file mode 100644
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+ interfaces and CCI (I2C compatible) control bus.
+
+properties:
+ compatible:
+ const: samsung,s5k6a3
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: extclk
+
+ clock-frequency:
+ default: 24000000
+ description: extclk clock frequency
+
+ gpios:
+ maxItems: 1
+ description: GPIO connected to the RESET pin
+
+ afvdd-supply:
+ description: AF (actuator) voltage supply
+
+ svdda-supply:
+ description: Core voltage supply
+
+ svddio-supply:
+ description: I/O voltage supply
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - gpios
+ - afvdd-supply
+ - svdda-supply
+ - svddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ clock-frequency = <24000000>;
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+ afvdd-supply = <&ldo19_reg>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
deleted file mode 100644
@@ -1,33 +0,0 @@
-Samsung S5K6A3(YX) raw image sensor
----------------------------------
-
-S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible : "samsung,s5k6a3";
-- reg : I2C slave address of the sensor;
-- svdda-supply : core voltage supply;
-- svddio-supply : I/O voltage supply;
-- afvdd-supply : AF (actuator) voltage supply;
-- gpios : specifier of a GPIO connected to the RESET pin;
-- clocks : should contain list of phandle and clock specifier pairs
- according to common clock bindings for the clocks described
- in the clock-names property;
-- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "extclk" clock should be
- configured to operate, in Hz; if this property is not
- specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The S5K6A3(YX) device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Following properties are valid for the endpoint node:
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
- video-interfaces.txt. The sensor supports only one data lane.
Convert the Samsung S5K6A3(YX) raw image sensor bindings to DT schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- DTS is being fixed here: https://lore.kernel.org/all/20230211134731.85957-3-krzysztof.kozlowski@linaro.org/ --- .../bindings/media/i2c/samsung,s5k6a3.yaml | 98 +++++++++++++++++++ .../bindings/media/samsung-s5k6a3.txt | 33 ------- 2 files changed, 98 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt