| Message ID | 20230815060739.30160-3-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/3] media: dt-bindings: samsung,exynos4212-fimc-is: replace duplicate pmu node with phandle | expand |
On 15/08/2023 08:07, Krzysztof Kozlowski wrote: > Devicetree for the FIMC IS camera included duplicated PMU node as its > child like: > > soc@0 { > system-controller@10020000 { ... }; // Real PMU > > camera@11800000 { > fimc-is@12000000 { > // FIMC IS camera node > pmu@10020000 { > reg = <0x10020000 0x3000>; // Fake PMU node > }; > }; > }; > }; > > This is not a correct representation of the hardware. Mapping the PMU > (Power Management Unit) IO memory should be via syscon-like phandle > (samsung,pmu-syscon, already used for other drivers), not by duplicating > "pmu" Devicetree node inside the FIMC IS. Backward compatibility is > preserved. Hey Mauro, This patchset is waiting a bit. Patchwork: https://patchwork.linuxtv.org/project/linux-media/list/?series=11051 This is a cleanup which blocks further DTS cleanup changes. Any comments from your side? Best regards, Krzysztof
diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-is.c b/drivers/media/platform/samsung/exynos4-is/fimc-is.c index 530a148fe4d3..a08c87ef6e2d 100644 --- a/drivers/media/platform/samsung/exynos4-is/fimc-is.c +++ b/drivers/media/platform/samsung/exynos4-is/fimc-is.c @@ -767,12 +767,32 @@ static void fimc_is_debugfs_create(struct fimc_is *is) static int fimc_is_runtime_resume(struct device *dev); static int fimc_is_runtime_suspend(struct device *dev); +static void __iomem *fimc_is_get_pmu_regs(struct device *dev) +{ + struct device_node *node; + void __iomem *regs; + + node = of_parse_phandle(dev->of_node, "samsung,pmu-syscon", 0); + if (!node) { + node = of_get_child_by_name(dev->of_node, "pmu"); + if (!node) + return IOMEM_ERR_PTR(-ENODEV); + dev_warn(dev, "Found PMU node via deprecated method, update your DTB\n"); + } + + regs = of_iomap(node, 0); + of_node_put(node); + if (!regs) + return IOMEM_ERR_PTR(-ENOMEM); + + return regs; +} + static int fimc_is_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct fimc_is *is; struct resource res; - struct device_node *node; int ret; is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL); @@ -794,14 +814,9 @@ static int fimc_is_probe(struct platform_device *pdev) if (IS_ERR(is->regs)) return PTR_ERR(is->regs); - node = of_get_child_by_name(dev->of_node, "pmu"); - if (!node) - return -ENODEV; - - is->pmu_regs = of_iomap(node, 0); - of_node_put(node); - if (!is->pmu_regs) - return -ENOMEM; + is->pmu_regs = fimc_is_get_pmu_regs(dev); + if (IS_ERR(is->pmu_regs)) + return PTR_ERR(is->pmu_regs); is->irq = irq_of_parse_and_map(dev->of_node, 0); if (!is->irq) {
Devicetree for the FIMC IS camera included duplicated PMU node as its child like: soc@0 { system-controller@10020000 { ... }; // Real PMU camera@11800000 { fimc-is@12000000 { // FIMC IS camera node pmu@10020000 { reg = <0x10020000 0x3000>; // Fake PMU node }; }; }; }; This is not a correct representation of the hardware. Mapping the PMU (Power Management Unit) IO memory should be via syscon-like phandle (samsung,pmu-syscon, already used for other drivers), not by duplicating "pmu" Devicetree node inside the FIMC IS. Backward compatibility is preserved. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes in v3: 1. Print deprecated warning only if child node "pmu" is not found. "Finding" -> "Found". Changes in v2: 1. Use IOMEM_ERR_PTR (Hans) --- .../platform/samsung/exynos4-is/fimc-is.c | 33 ++++++++++++++----- 1 file changed, 24 insertions(+), 9 deletions(-)