new file mode 100644
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: onsemi 1/6-inch 720p CMOS Digital Image Sensor
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+ The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor
+ with an active pixel-array size of 1296H x 976V. It is programmable through
+ an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI
+ CSI-2 connection.
+
+properties:
+ compatible:
+ const: onnn,mt9m114
+
+ reg:
+ description: I2C device address
+ enum:
+ - 0x48
+ - 0x5d
+
+ clocks:
+ description: EXTCLK clock signal
+ maxItems: 1
+
+ vdd-supply:
+ description:
+ Core digital voltage supply, 1.8V
+
+ vddio-supply:
+ description:
+ I/O digital voltage supply, 1.8V or 2.8V
+
+ vaa-supply:
+ description:
+ Analog voltage supply, 2.8V
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the RESET_BAR pin, if any (active
+ low).
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ additionalProperties: false
+
+ properties:
+ bus-type:
+ enum: [4, 5, 6]
+
+ link-frequencies: true
+ remote-endpoint: true
+
+ # The number and mapping of lanes (for CSI-2), and the bus width and
+ # signal polarities (for parallel and BT.656) are fixed and must not
+ # be specified.
+
+ required:
+ - bus-type
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - vdd-supply
+ - vddio-supply
+ - vaa-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@48 {
+ compatible = "onnn,mt9m114";
+ reg = <0x48>;
+
+ clocks = <&clk24m 0>;
+
+ reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+
+ vddio-supply = <®_cam_1v8>;
+ vdd-supply = <®_cam_1v8>;
+ vaa-supply = <®_2p8v>;
+
+ port {
+ endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ link-frequencies = /bits/ 64 <384000000>;
+ remote-endpoint = <&mipi_csi_in>;
+ };
+ };
+ };
+ };
+...
@@ -14539,6 +14539,13 @@ L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/docg3*
+MT9M114 ONSEMI SENSOR DRIVER
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c.onnn,mt9m114.yaml
+
MT9P031 APTINA CAMERA SENSOR
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org