From patchwork Mon Sep 25 14:36:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Martin_T=C5=AFma?= X-Patchwork-Id: 13397757 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9354FCE7A96 for ; Mon, 25 Sep 2023 12:35:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229924AbjIYMgD (ORCPT ); Mon, 25 Sep 2023 08:36:03 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43896 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229674AbjIYMgC (ORCPT ); Mon, 25 Sep 2023 08:36:02 -0400 Received: from mx.gpxsee.org (mx.gpxsee.org [37.205.14.76]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id BAD03FC; Mon, 25 Sep 2023 05:35:52 -0700 (PDT) Received: from localhost.localdomain (host-178-72-203-85.ip.nej.cz [178.72.203.85]) by mx.gpxsee.org (Postfix) with ESMTPSA id 95C011B47; Mon, 25 Sep 2023 14:35:49 +0200 (CEST) From: tumic@gpxsee.org To: Mauro Carvalho Chehab Cc: Hans Verkuil , linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, =?utf-8?q?Martin_T=C5=AFma?= Subject: [PATCH v11 2/2] Added Digiteq Automotive MGB4 driver documentation Date: Mon, 25 Sep 2023 16:36:05 +0200 Message-Id: <20230925143605.4686-3-tumic@gpxsee.org> X-Mailer: git-send-email 2.40.1 In-Reply-To: <20230925143605.4686-1-tumic@gpxsee.org> References: <20230925143605.4686-1-tumic@gpxsee.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Martin Tůma The "admin-guide" documentation for the Digiteq Automotive MGB4 driver. Signed-off-by: Martin Tůma --- Documentation/admin-guide/media/mgb4.rst | 374 ++++++++++++++++++ .../admin-guide/media/pci-cardlist.rst | 1 + .../admin-guide/media/v4l-drivers.rst | 1 + 3 files changed, 376 insertions(+) create mode 100644 Documentation/admin-guide/media/mgb4.rst diff --git a/Documentation/admin-guide/media/mgb4.rst b/Documentation/admin-guide/media/mgb4.rst new file mode 100644 index 000000000000..2977f74d7e26 --- /dev/null +++ b/Documentation/admin-guide/media/mgb4.rst @@ -0,0 +1,374 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +mgb4 sysfs interface +==================== + +The mgb4 driver provides a sysfs interface, that is used to configure video +stream related parameters (some of them must be set properly before the v4l2 +device can be opened) and obtain the video device/stream status. + +There are two types of parameters - global / PCI card related, found under +``/sys/class/video4linux/videoX/device`` and module specific found under +``/sys/class/video4linux/videoX``. + + +Global (PCI card) parameters +============================ + +**module_type** (R): + Module type. + + | 0 - No module present + | 1 - FPDL3 + | 2 - GMSL + +**module_version** (R): + Module version number. Zero in case of a missing module. + +**fw_type** (R): + Firmware type. + + | 1 - FPDL3 + | 2 - GMSL + +**fw_version** (R): + Firmware version number. + +**serial_number** (R): + Card serial number. The format is:: + + PRODUCT-REVISION-SERIES-SERIAL + + where each component is a 8b number. + + +Common FPDL3/GMSL input parameters +================================== + +**input_id** (R): + Input number ID, zero based. + +**oldi_lane_width** (RW): + Number of deserializer output lanes. + + | 0 - single + | 1 - dual (default) + +**color_mapping** (RW): + Mapping of the incoming bits in the signal to the colour bits of the pixels. + + | 0 - OLDI/JEIDA + | 1 - SPWG/VESA (default) + +**link_status** (R): + Video link status. If the link is locked, chips are properly connected and + communicating at the same speed and protocol. The link can be locked without + an active video stream. + + A value of 0 is equivalent to the V4L2_IN_ST_NO_SYNC flag of the V4L2 + VIDIOC_ENUMINPUT status bits. + + | 0 - unlocked + | 1 - locked + +**stream_status** (R): + Video stream status. A stream is detected if the link is locked, the input + pixel clock is running and the DE signal is moving. + + A value of 0 is equivalent to the V4L2_IN_ST_NO_SIGNAL flag of the V4L2 + VIDIOC_ENUMINPUT status bits. + + | 0 - not detected + | 1 - detected + +**video_width** (R): + Video stream width. This is the actual width as detected by the HW. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in the width + field of the v4l2_bt_timings struct. + +**video_height** (R): + Video stream height. This is the actual height as detected by the HW. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in the height + field of the v4l2_bt_timings struct. + +**vsync_status** (R): + The type of VSYNC pulses as detected by the video format detector. + + The value is equivalent to the flags returned by VIDIOC_QUERY_DV_TIMINGS in + the polarities field of the v4l2_bt_timings struct. + + | 0 - active low + | 1 - active high + | 2 - not available + +**hsync_status** (R): + The type of HSYNC pulses as detected by the video format detector. + + The value is equivalent to the flags returned by VIDIOC_QUERY_DV_TIMINGS in + the polarities field of the v4l2_bt_timings struct. + + | 0 - active low + | 1 - active high + | 2 - not available + +**vsync_gap_length** (RW): + If the incoming video signal does not contain synchronization VSYNC and + HSYNC pulses, these must be generated internally in the FPGA to achieve + the correct frame ordering. This value indicates, how many "empty" pixels + (pixels with deasserted Data Enable signal) are necessary to generate the + internal VSYNC pulse. + +**hsync_gap_length** (RW): + If the incoming video signal does not contain synchronization VSYNC and + HSYNC pulses, these must be generated internally in the FPGA to achieve + the correct frame ordering. This value indicates, how many "empty" pixels + (pixels with deasserted Data Enable signal) are necessary to generate the + internal HSYNC pulse. The value must be greater than 1 and smaller than + vsync_gap_length. + +**pclk_frequency** (R): + Input pixel clock frequency in kHz. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the pixelclock field of the v4l2_bt_timings struct. + + *Note: The frequency_range parameter must be set properly first to get + a valid frequency here.* + +**hsync_width** (R): + Width of the HSYNC signal in PCLK clock ticks. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the hsync field of the v4l2_bt_timings struct. + +**vsync_width** (R): + Width of the VSYNC signal in PCLK clock ticks. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the vsync field of the v4l2_bt_timings struct. + +**hback_porch** (R): + Number of PCLK pulses between deassertion of the HSYNC signal and the first + valid pixel in the video line (marked by DE=1). + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the hbackporch field of the v4l2_bt_timings struct. + +**hfront_porch** (R): + Number of PCLK pulses between the end of the last valid pixel in the video + line (marked by DE=1) and assertion of the HSYNC signal. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the hfrontporch field of the v4l2_bt_timings struct. + +**vback_porch** (R): + Number of video lines between deassertion of the VSYNC signal and the video + line with the first valid pixel (marked by DE=1). + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the vbackporch field of the v4l2_bt_timings struct. + +**vfront_porch** (R): + Number of video lines between the end of the last valid pixel line (marked + by DE=1) and assertion of the VSYNC signal. + + The value is identical to what VIDIOC_QUERY_DV_TIMINGS returns in + the vfrontporch field of the v4l2_bt_timings struct. + +**frequency_range** (RW) + PLL frequency range of the OLDI input clock generator. The PLL frequency is + derived from the Pixel Clock Frequency (PCLK) and is equal to PCLK if + oldi_lane_width is set to "single" and PCLK/2 if oldi_lane_width is set to + "dual". + + | 0 - PLL < 50MHz (default) + | 1 - PLL >= 50MHz + + *Note: This parameter can not be changed while the input v4l2 device is + open.* + + +Common FPDL3/GMSL output parameters +=================================== + +**output_id** (R): + Output number ID, zero based. + +**video_source** (RW): + Output video source. If set to 0 or 1, the source is the corresponding card + input and the v4l2 output devices are disabled. If set to 2 or 3, the source + is the corresponding v4l2 video output device. The default is + the corresponding v4l2 output, i.e. 2 for OUT1 and 3 for OUT2. + + | 0 - input 0 + | 1 - input 1 + | 2 - v4l2 output 0 + | 3 - v4l2 output 1 + + *Note: This parameter can not be changed while ANY of the input/output v4l2 + devices is open.* + +**display_width** (RW): + Display width. There is no autodetection of the connected display, so the + proper value must be set before the start of streaming. The default width + is 1280. + + *Note: This parameter can not be changed while the output v4l2 device is + open.* + +**display_height** (RW): + Display height. There is no autodetection of the connected display, so the + proper value must be set before the start of streaming. The default height + is 640. + + *Note: This parameter can not be changed while the output v4l2 device is + open.* + +**frame_rate** (RW): + Output video frame rate in frames per second. The default frame rate is + 60Hz. + +**hsync_polarity** (RW): + HSYNC signal polarity. + + | 0 - active low (default) + | 1 - active high + +**vsync_polarity** (RW): + VSYNC signal polarity. + + | 0 - active low (default) + | 1 - active high + +**de_polarity** (RW): + DE signal polarity. + + | 0 - active low + | 1 - active high (default) + +**pclk_frequency** (RW): + Output pixel clock frequency. Allowed values are between 25000-190000(kHz) + and there is a non-linear stepping between two consecutive allowed + frequencies. The driver finds the nearest allowed frequency to the given + value and sets it. When reading this property, you get the exact + frequency set by the driver. The default frequency is 70000kHz. + + *Note: This parameter can not be changed while the output v4l2 device is + open.* + +**hsync_width** (RW): + Width of the HSYNC signal in pixels. The default value is 16. + +**vsync_width** (RW): + Width of the VSYNC signal in video lines. The default value is 2. + +**hback_porch** (RW): + Number of PCLK pulses between deassertion of the HSYNC signal and the first + valid pixel in the video line (marked by DE=1). The default value is 32. + +**hfront_porch** (RW): + Number of PCLK pulses between the end of the last valid pixel in the video + line (marked by DE=1) and assertion of the HSYNC signal. The default value + is 32. + +**vback_porch** (RW): + Number of video lines between deassertion of the VSYNC signal and the video + line with the first valid pixel (marked by DE=1). The default value is 2. + +**vfront_porch** (RW): + Number of video lines between the end of the last valid pixel line (marked + by DE=1) and assertion of the VSYNC signal. The default value is 2. + + +FPDL3 specific input parameters +=============================== + +**fpdl3_input_width** (RW): + Number of deserializer input lines. + + | 0 - auto (default) + | 1 - single + | 2 - dual + +FPDL3 specific output parameters +================================ + +**fpdl3_output_width** (RW): + Number of serializer output lines. + + | 0 - auto (default) + | 1 - single + | 2 - dual + +GMSL specific input parameters +============================== + +**gmsl_mode** (RW): + GMSL speed mode. + + | 0 - 12Gb/s (default) + | 1 - 6Gb/s + | 2 - 3Gb/s + | 3 - 1.5Gb/s + +**gmsl_stream_id** (RW): + The GMSL multi-stream contains up to four video streams. This parameter + selects which stream is captured by the video input. The value is the + zero-based index of the stream. The default stream id is 0. + + *Note: This parameter can not be changed while the input v4l2 device is + open.* + +**gmsl_fec** (RW): + GMSL Forward Error Correction (FEC). + + | 0 - disabled + | 1 - enabled (default) + + +==================== +mgb4 mtd partitions +==================== + +The mgb4 driver creates a MTD device with two partitions: + - mgb4-fw.X - FPGA firmware. + - mgb4-data.X - Factory settings, e.g. card serial number. + +The *mgb4-fw* partition is writable and is used for FW updates, *mgb4-data* is +read-only. The *X* attached to the partition name represents the card number. +Depending on the CONFIG_MTD_PARTITIONED_MASTER kernel configuration, you may +also have a third partition named *mgb4-flash* available in the system. This +partition represents the whole, unpartitioned, card's FLASH memory and one should +not fiddle with it... + +==================== +mgb4 iio (triggers) +==================== + +The mgb4 driver creates an Industrial I/O (IIO) device that provides trigger and +signal level status capability. The following scan elements are available: + +**activity**: + The trigger levels and pending status. + + | bit 1 - trigger 1 pending + | bit 2 - trigger 2 pending + | bit 5 - trigger 1 level + | bit 6 - trigger 2 level + +**timestamp**: + The trigger event timestamp. + +The iio device can operate either in "raw" mode where you can fetch the signal +levels (activity bits 5 and 6) using sysfs access or in triggered buffer mode. +In the triggered buffer mode you can follow the signal level changes (activity +bits 1 and 2) using the iio device in /dev. If you enable the timestamps, you +will also get the exact trigger event time that can be matched to a video frame +(every mgb4 video frame has a timestamp with the same clock source). + +*Note: although the activity sample always contains all the status bits, it makes +no sense to get the pending bits in raw mode or the level bits in the triggered +buffer mode - the values do not represent valid data in such case.* diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst index 42528795d4da..7d8e3c8987db 100644 --- a/Documentation/admin-guide/media/pci-cardlist.rst +++ b/Documentation/admin-guide/media/pci-cardlist.rst @@ -77,6 +77,7 @@ ipu3-cio2 Intel ipu3-cio2 driver ivtv Conexant cx23416/cx23415 MPEG encoder/decoder ivtvfb Conexant cx23415 framebuffer mantis MANTIS based cards +mgb4 Digiteq Automotive MGB4 frame grabber mxb Siemens-Nixdorf 'Multimedia eXtension Board' netup-unidvb NetUP Universal DVB card ngene Micronas nGene diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 1c41f87c3917..61283d67ceef 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -17,6 +17,7 @@ Video4Linux (V4L) driver-specific documentation imx7 ipu3 ivtv + mgb4 omap3isp omap4_camera philips