| Message ID | 20231126020948.2700-1-laurent.pinchart@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: rkisp1: resizer: Stop manual allocation of v4l2_subdev_state | expand |
On 26/11/2023 04:09, Laurent Pinchart wrote: > Supported media bus codes on the resizer sink pad are identical to the > ISP source pad. The .enum_mbus_code() handler thus delegates the > enumeration to the ISP's operation. This is problematic for two > reasons: > > - Format enumeration on the ISP source pad is dependent on the format > configured on the ISP sink pad for the same subdev state (TRY or > ACTIVE), while format enumeration on the resizer sink pad should > return all formats supported by the resizer subdev, regardless of the > ISP configuration. > > - Delegating the operation involves creating a fake v4l2_subdev_state on > the stack to pass to the ISP .enum_mbus_code() handler. This gets in > the way of evolution of both the ISP enumeration handler and, more > generally, the V4L2 subdev state infrastructure. > > Fix those two issues by implementing format enumeration manually for the > resizer. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > Paul, Kieran, would you be able to test this for regressions ? > --- > .../platform/rockchip/rkisp1/rkisp1-resizer.c | 38 ++++++++++++------- > 1 file changed, 24 insertions(+), 14 deletions(-) Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> I tested on my i.MX8MP board, although my kernel branch has quite a bit of non-upstream patches to get everything working. But I don't think those affect this patch. Tomi > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c > index f7af360dcb28..a8e377701302 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c > @@ -330,12 +330,8 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd, > { > struct rkisp1_resizer *rsz = > container_of(sd, struct rkisp1_resizer, sd); > - struct v4l2_subdev_pad_config dummy_cfg; > - struct v4l2_subdev_state pad_state = { > - .pads = &dummy_cfg > - }; > - u32 pad = code->pad; > - int ret; > + unsigned int index = code->index; > + unsigned int i; > > if (code->pad == RKISP1_RSZ_PAD_SRC) { > /* supported mbus codes on the src are the same as in the capture */ > @@ -355,15 +351,29 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd, > return 0; > } > > - /* supported mbus codes on the sink pad are the same as isp src pad */ > - code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO; > - ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code, > - &pad_state, code); > + /* > + * Supported mbus codes on the sink pad are the same as on the ISP > + * source pad. > + */ > + for (i = 0; ; i++) { > + const struct rkisp1_mbus_info *fmt = > + rkisp1_mbus_info_get_by_index(i); > > - /* restore pad */ > - code->pad = pad; > - code->flags = 0; > - return ret; > + if (!fmt) > + break; > + > + if (!(fmt->direction & RKISP1_ISP_SD_SRC)) > + continue; > + > + if (!index) { > + code->code = fmt->mbus_code; > + return 0; > + } > + > + index--; > + } > + > + return -EINVAL; > } > > static int rkisp1_rsz_init_state(struct v4l2_subdev *sd,
On Sun, Nov 26, 2023 at 04:09:48AM +0200, Laurent Pinchart wrote: > Supported media bus codes on the resizer sink pad are identical to the > ISP source pad. The .enum_mbus_code() handler thus delegates the > enumeration to the ISP's operation. This is problematic for two > reasons: > > - Format enumeration on the ISP source pad is dependent on the format > configured on the ISP sink pad for the same subdev state (TRY or > ACTIVE), while format enumeration on the resizer sink pad should > return all formats supported by the resizer subdev, regardless of the > ISP configuration. > > - Delegating the operation involves creating a fake v4l2_subdev_state on > the stack to pass to the ISP .enum_mbus_code() handler. This gets in > the way of evolution of both the ISP enumeration handler and, more > generally, the V4L2 subdev state infrastructure. > > Fix those two issues by implementing format enumeration manually for the > resizer. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> > --- > Paul, Kieran, would you be able to test this for regressions ? > --- > .../platform/rockchip/rkisp1/rkisp1-resizer.c | 38 ++++++++++++------- > 1 file changed, 24 insertions(+), 14 deletions(-) > > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c > index f7af360dcb28..a8e377701302 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c > @@ -330,12 +330,8 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd, > { > struct rkisp1_resizer *rsz = > container_of(sd, struct rkisp1_resizer, sd); > - struct v4l2_subdev_pad_config dummy_cfg; > - struct v4l2_subdev_state pad_state = { > - .pads = &dummy_cfg > - }; > - u32 pad = code->pad; > - int ret; > + unsigned int index = code->index; > + unsigned int i; > > if (code->pad == RKISP1_RSZ_PAD_SRC) { > /* supported mbus codes on the src are the same as in the capture */ > @@ -355,15 +351,29 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd, > return 0; > } > > - /* supported mbus codes on the sink pad are the same as isp src pad */ > - code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO; > - ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code, > - &pad_state, code); > + /* > + * Supported mbus codes on the sink pad are the same as on the ISP > + * source pad. > + */ > + for (i = 0; ; i++) { > + const struct rkisp1_mbus_info *fmt = > + rkisp1_mbus_info_get_by_index(i); > > - /* restore pad */ > - code->pad = pad; > - code->flags = 0; > - return ret; > + if (!fmt) > + break; > + > + if (!(fmt->direction & RKISP1_ISP_SD_SRC)) > + continue; > + > + if (!index) { > + code->code = fmt->mbus_code; > + return 0; > + } > + > + index--; > + } > + > + return -EINVAL; > } > > static int rkisp1_rsz_init_state(struct v4l2_subdev *sd, > -- > Regards, > > Laurent Pinchart >
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c index f7af360dcb28..a8e377701302 100644 --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c @@ -330,12 +330,8 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd, { struct rkisp1_resizer *rsz = container_of(sd, struct rkisp1_resizer, sd); - struct v4l2_subdev_pad_config dummy_cfg; - struct v4l2_subdev_state pad_state = { - .pads = &dummy_cfg - }; - u32 pad = code->pad; - int ret; + unsigned int index = code->index; + unsigned int i; if (code->pad == RKISP1_RSZ_PAD_SRC) { /* supported mbus codes on the src are the same as in the capture */ @@ -355,15 +351,29 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd, return 0; } - /* supported mbus codes on the sink pad are the same as isp src pad */ - code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO; - ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code, - &pad_state, code); + /* + * Supported mbus codes on the sink pad are the same as on the ISP + * source pad. + */ + for (i = 0; ; i++) { + const struct rkisp1_mbus_info *fmt = + rkisp1_mbus_info_get_by_index(i); - /* restore pad */ - code->pad = pad; - code->flags = 0; - return ret; + if (!fmt) + break; + + if (!(fmt->direction & RKISP1_ISP_SD_SRC)) + continue; + + if (!index) { + code->code = fmt->mbus_code; + return 0; + } + + index--; + } + + return -EINVAL; } static int rkisp1_rsz_init_state(struct v4l2_subdev *sd,
Supported media bus codes on the resizer sink pad are identical to the ISP source pad. The .enum_mbus_code() handler thus delegates the enumeration to the ISP's operation. This is problematic for two reasons: - Format enumeration on the ISP source pad is dependent on the format configured on the ISP sink pad for the same subdev state (TRY or ACTIVE), while format enumeration on the resizer sink pad should return all formats supported by the resizer subdev, regardless of the ISP configuration. - Delegating the operation involves creating a fake v4l2_subdev_state on the stack to pass to the ISP .enum_mbus_code() handler. This gets in the way of evolution of both the ISP enumeration handler and, more generally, the V4L2 subdev state infrastructure. Fix those two issues by implementing format enumeration manually for the resizer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Paul, Kieran, would you be able to test this for regressions ? --- .../platform/rockchip/rkisp1/rkisp1-resizer.c | 38 ++++++++++++------- 1 file changed, 24 insertions(+), 14 deletions(-)