| Message ID | 20231126125320.4024456-2-festevam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] media: dt-bindings: media: Introduce MEDIA_BUS_TYPE_DPI | expand |
On Sun, 26 Nov 2023 09:53:20 -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@denx.de> > > To improve readability, replace hardcoding numerical constants with the > corresponding definitions from video-interfaces.h. > > Based on commit c4cfd47eb4ac ("media: dt-bindings: Use new video interface > bus type macros in examples"). > > Signed-off-by: Fabio Estevam <festevam@denx.de> > --- > .../devicetree/bindings/display/bridge/analogix,anx7625.yaml | 3 ++- > .../devicetree/bindings/media/i2c/toshiba,tc358746.yaml | 3 ++- > Documentation/devicetree/bindings/media/microchip,csi2dc.yaml | 4 +++- > .../devicetree/bindings/media/starfive,jh7110-camss.yaml | 4 +++- > .../devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml | 3 ++- > 5 files changed, 12 insertions(+), 5 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
Hi Fabio, Thank you for the patch. On Sun, Nov 26, 2023 at 09:53:20AM -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@denx.de> > > To improve readability, replace hardcoding numerical constants with the > corresponding definitions from video-interfaces.h. > > Based on commit c4cfd47eb4ac ("media: dt-bindings: Use new video interface > bus type macros in examples"). > > Signed-off-by: Fabio Estevam <festevam@denx.de> > --- > .../devicetree/bindings/display/bridge/analogix,anx7625.yaml | 3 ++- > .../devicetree/bindings/media/i2c/toshiba,tc358746.yaml | 3 ++- > Documentation/devicetree/bindings/media/microchip,csi2dc.yaml | 4 +++- > .../devicetree/bindings/media/starfive,jh7110-camss.yaml | 4 +++- > .../devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml | 3 ++- > 5 files changed, 12 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > index a1ed1004651b..e18cc0e8a520 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -132,6 +132,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/media/video-interfaces.h> > > i2c { > #address-cells = <1>; > @@ -157,7 +158,7 @@ examples: > reg = <0>; > anx7625_in: endpoint { > remote-endpoint = <&mipi_dsi>; > - bus-type = <7>; 7 seems to have been a mistake, as this is a DSI endpoint, not a DPI endpoint. > + bus-type = <MEDIA_BUS_TYPE_DPI>; > data-lanes = <0 1 2 3>; > }; > }; > diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml > index 1c476b635b69..9e1874946017 100644 > --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml > @@ -129,6 +129,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/media/video-interfaces.h> > > i2c { > #address-cells = <1>; > @@ -161,7 +162,7 @@ examples: > remote-endpoint = <&sensor_out>; > hsync-active = <0>; > vsync-active = <0>; > - bus-type = <5>; > + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; > }; > }; > > diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml > index b3a345fc6464..2e694479d82d 100644 > --- a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml > +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml > @@ -142,6 +142,8 @@ examples: > # Example for connecting to a parallel sensor controller block (video pipe) > # and the input is received from Synopsys IDI interface > - | > + #include <dt-bindings/media/video-interfaces.h> > + > csi2dc@e1404000 { > compatible = "microchip,sama7g5-csi2dc"; > reg = <0xe1404000 0x500>; > @@ -154,7 +156,7 @@ examples: > port@0 { > reg = <0>; /* must be 0, first child port */ > csi2dc_in: endpoint { /* input from IDI interface */ > - bus-type = <4>; /* MIPI CSI2 D-PHY */ > + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; > remote-endpoint = <&csi2host_out>; > }; > }; > diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > index c66586d90fa2..4964e59c3ae3 100644 > --- a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml > @@ -120,6 +120,8 @@ additionalProperties: false > > examples: > - | > + #include <dt-bindings/media/video-interfaces.h> > + > isp@19840000 { > compatible = "starfive,jh7110-camss"; > reg = <0x19840000 0x10000>, > @@ -161,7 +163,7 @@ examples: > reg = <0>; > vin_from_sc2235: endpoint { > remote-endpoint = <&sc2235_to_vin>; > - bus-type = <5>; > + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; > bus-width = <8>; > data-shift = <2>; > hsync-active = <1>; > diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml > index f762fdc05e4d..5fdb9ae758e3 100644 > --- a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml > +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml > @@ -58,6 +58,7 @@ additionalProperties: false > > examples: > - | > + #include <dt-bindings/media/video-interfaces.h> > #include <dt-bindings/soc/ti,sci_pm_domain.h> > > ti_csi2rx0: ticsi2rx@4500000 { > @@ -90,7 +91,7 @@ examples: > > csi2rx0_in_sensor: endpoint { > remote-endpoint = <&csi2_cam0>; > - bus-type = <4>; /* CSI2 DPHY. */ > + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; > clock-lanes = <0>; > data-lanes = <1 2>; > };
Hi Laurent, On Mon, Nov 27, 2023 at 9:00 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > @@ -157,7 +158,7 @@ examples: > > reg = <0>; > > anx7625_in: endpoint { > > remote-endpoint = <&mipi_dsi>; > > - bus-type = <7>; > > 7 seems to have been a mistake, as this is a DSI endpoint, not a DPI > endpoint. bus-type = <7> was added in commit 0a61ef9cc30d ("dt-bindings:drm/bridge:anx7625: add port@0 property"). Adding Xin Ji on CC for clarification.
Hi Fabio Estevam, yes, 7 is for DPI, please remove it. Reviewed-by: Xin Ji <xji@analogixsemi.com> > -----Original Message----- > From: Fabio Estevam <festevam@gmail.com> > Sent: Tuesday, November 28, 2023 8:31 AM > To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>; Xin Ji > <xji@analogixsemi.com> > Cc: sakari.ailus@linux.intel.com; rfoss@kernel.org; robh+dt@kernel.org; > krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org; mchehab@kernel.org; > devicetree@vger.kernel.org; linux-media@vger.kernel.org; Fabio Estevam > <festevam@denx.de> > Subject: Re: [PATCH 2/2] media: dt-bindings: Use bus-types definitions from > video-interfaces.h > > CAUTION: This email originated from outside of the organization. Please do not > click links or open attachments unless you recognize the sender, and know the > content is safe. > > > Hi Laurent, > > On Mon, Nov 27, 2023 at 9:00 PM Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: > > > > @@ -157,7 +158,7 @@ examples: > > > reg = <0>; > > > anx7625_in: endpoint { > > > remote-endpoint = <&mipi_dsi>; > > > - bus-type = <7>; > > > > 7 seems to have been a mistake, as this is a DSI endpoint, not a DPI > > endpoint. > > bus-type = <7> was added in commit 0a61ef9cc30d > ("dt-bindings:drm/bridge:anx7625: add port@0 property"). > > Adding Xin Ji on CC for clarification.
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index a1ed1004651b..e18cc0e8a520 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -132,6 +132,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c { #address-cells = <1>; @@ -157,7 +158,7 @@ examples: reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; - bus-type = <7>; + bus-type = <MEDIA_BUS_TYPE_DPI>; data-lanes = <0 1 2 3>; }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml index 1c476b635b69..9e1874946017 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -129,6 +129,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c { #address-cells = <1>; @@ -161,7 +162,7 @@ examples: remote-endpoint = <&sensor_out>; hsync-active = <0>; vsync-active = <0>; - bus-type = <5>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; }; }; diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml index b3a345fc6464..2e694479d82d 100644 --- a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml @@ -142,6 +142,8 @@ examples: # Example for connecting to a parallel sensor controller block (video pipe) # and the input is received from Synopsys IDI interface - | + #include <dt-bindings/media/video-interfaces.h> + csi2dc@e1404000 { compatible = "microchip,sama7g5-csi2dc"; reg = <0xe1404000 0x500>; @@ -154,7 +156,7 @@ examples: port@0 { reg = <0>; /* must be 0, first child port */ csi2dc_in: endpoint { /* input from IDI interface */ - bus-type = <4>; /* MIPI CSI2 D-PHY */ + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; remote-endpoint = <&csi2host_out>; }; }; diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml index c66586d90fa2..4964e59c3ae3 100644 --- a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml @@ -120,6 +120,8 @@ additionalProperties: false examples: - | + #include <dt-bindings/media/video-interfaces.h> + isp@19840000 { compatible = "starfive,jh7110-camss"; reg = <0x19840000 0x10000>, @@ -161,7 +163,7 @@ examples: reg = <0>; vin_from_sc2235: endpoint { remote-endpoint = <&sc2235_to_vin>; - bus-type = <5>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; data-shift = <2>; hsync-active = <1>; diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml index f762fdc05e4d..5fdb9ae758e3 100644 --- a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml @@ -58,6 +58,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> ti_csi2rx0: ticsi2rx@4500000 { @@ -90,7 +91,7 @@ examples: csi2rx0_in_sensor: endpoint { remote-endpoint = <&csi2_cam0>; - bus-type = <4>; /* CSI2 DPHY. */ + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2>; };