diff mbox series

[v3,09/17] media: intel/ipu6: add the CSI2 DPHY implementation

Message ID 20240111065531.2418836-10-bingbu.cao@intel.com (mailing list archive)
State New, archived
Headers show
Series Intel IPU6 and IPU6 input system drivers | expand

Commit Message

Bingbu Cao Jan. 11, 2024, 6:55 a.m. UTC
From: Bingbu Cao <bingbu.cao@intel.com>

IPU6 CSI2 DPHY hardware varies on different platforms, current
IPU6 has three DPHY hardware instance which maybe used on tigerlake,
alderlake, metorlake and jasperlake. MCD DPHY is shipped on tigerlake
and alderlake, DWC DPHY is shipped on metorlake.

Each PHY has its own register space, input system driver call the
DPHY callback which was set at isys_probe().

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
---
 .../media/pci/intel/ipu6/ipu6-isys-dwc-phy.c  | 536 +++++++++++++
 .../media/pci/intel/ipu6/ipu6-isys-jsl-phy.c  | 242 ++++++
 .../media/pci/intel/ipu6/ipu6-isys-mcd-phy.c  | 720 ++++++++++++++++++
 3 files changed, 1498 insertions(+)
 create mode 100644 drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c
 create mode 100644 drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c
 create mode 100644 drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c
diff mbox series

Patch

diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c b/drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c
new file mode 100644
index 000000000000..a4bb5ff51d4e
--- /dev/null
+++ b/drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c
@@ -0,0 +1,536 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 - 2023 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/math64.h>
+
+#include "ipu6-bus.h"
+#include "ipu6-isys.h"
+#include "ipu6-platform-isys-csi2-reg.h"
+
+#define IPU6_DWC_DPHY_BASE(i)			(0x238038 + 0x34 * (i))
+#define IPU6_DWC_DPHY_RSTZ			0x00
+#define IPU6_DWC_DPHY_SHUTDOWNZ			0x04
+#define IPU6_DWC_DPHY_HSFREQRANGE		0x08
+#define IPU6_DWC_DPHY_CFGCLKFREQRANGE		0x0c
+#define IPU6_DWC_DPHY_TEST_IFC_ACCESS_MODE	0x10
+#define IPU6_DWC_DPHY_TEST_IFC_REQ		0x14
+#define IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION	0x18
+#define IPU6_DWC_DPHY_DFT_CTRL0			0x28
+#define IPU6_DWC_DPHY_DFT_CTRL1			0x2c
+#define IPU6_DWC_DPHY_DFT_CTRL2			0x30
+
+/*
+ * test IFC request definition:
+ * - req: 0 for read, 1 for write
+ * - 12 bits address
+ * - 8bits data (will ignore for read)
+ * --24----16------4-----0
+ * --|-data-|-addr-|-req-|
+ */
+#define IFC_REQ(req, addr, data) (FIELD_PREP(GENMASK(23, 16), data) | \
+				  FIELD_PREP(GENMASK(15, 4), addr) | \
+				  FIELD_PREP(GENMASK(1, 0), req))
+
+#define TEST_IFC_REQ_READ	0
+#define TEST_IFC_REQ_WRITE	1
+#define TEST_IFC_REQ_RESET	2
+
+#define TEST_IFC_ACCESS_MODE_FSM	0
+#define TEST_IFC_ACCESS_MODE_IFC_CTL	1
+
+enum phy_fsm_state {
+	PHY_FSM_STATE_POWERON = 0,
+	PHY_FSM_STATE_BGPON = 1,
+	PHY_FSM_STATE_CAL_TYPE = 2,
+	PHY_FSM_STATE_BURNIN_CAL = 3,
+	PHY_FSM_STATE_TERMCAL = 4,
+	PHY_FSM_STATE_OFFSETCAL = 5,
+	PHY_FSM_STATE_OFFSET_LANE = 6,
+	PHY_FSM_STATE_IDLE = 7,
+	PHY_FSM_STATE_ULP = 8,
+	PHY_FSM_STATE_DDLTUNNING = 9,
+	PHY_FSM_STATE_SKEW_BACKWARD = 10,
+	PHY_FSM_STATE_INVALID,
+};
+
+static void dwc_dphy_write(struct ipu6_isys *isys, u32 phy_id, u32 addr,
+			   u32 data)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id);
+
+	dev_dbg(dev, "write: reg 0x%lx = data 0x%x", base + addr - isys_base,
+		data);
+	writel(data, base + addr);
+}
+
+static u32 dwc_dphy_read(struct ipu6_isys *isys, u32 phy_id, u32 addr)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id);
+	u32 data;
+
+	data = readl(base + addr);
+	dev_dbg(dev, "read: reg 0x%lx = data 0x%x", base + addr - isys_base,
+		data);
+
+	return data;
+}
+
+static void dwc_dphy_write_mask(struct ipu6_isys *isys, u32 phy_id, u32 addr,
+				u32 data, u8 shift, u8 width)
+{
+	u32 temp;
+	u32 mask;
+
+	mask = (1 << width) - 1;
+	temp = dwc_dphy_read(isys, phy_id, addr);
+	temp &= ~(mask << shift);
+	temp |= (data & mask) << shift;
+	dwc_dphy_write(isys, phy_id, addr, temp);
+}
+
+static u32 __maybe_unused dwc_dphy_read_mask(struct ipu6_isys *isys, u32 phy_id,
+					     u32 addr, u8 shift,  u8 width)
+{
+	u32 val;
+
+	val = dwc_dphy_read(isys, phy_id, addr) >> shift;
+	return val & ((1 << width) - 1);
+}
+
+#define DWC_DPHY_TIMEOUT (5 * USEC_PER_SEC)
+static int dwc_dphy_ifc_read(struct ipu6_isys *isys, u32 phy_id, u32 addr,
+			     u32 *val)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id);
+	void __iomem *reg;
+	u32 completion;
+	int ret;
+
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_REQ,
+		       IFC_REQ(TEST_IFC_REQ_READ, addr, 0));
+	reg = base + IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION;
+	ret = readl_poll_timeout(reg, completion, !(completion & BIT(0)),
+				 10, DWC_DPHY_TIMEOUT);
+	if (ret) {
+		dev_err(dev, "DWC ifc request read timeout\n");
+		return ret;
+	}
+
+	*val = completion >> 8 & 0xff;
+	*val = FIELD_GET(GENMASK(15, 8), completion);
+	dev_dbg(dev, "DWC ifc read 0x%x = 0x%x", addr, *val);
+
+	return 0;
+}
+
+static int dwc_dphy_ifc_write(struct ipu6_isys *isys, u32 phy_id, u32 addr,
+			      u32 data)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id);
+	void __iomem *reg;
+	u32 completion;
+	int ret;
+
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_REQ,
+		       IFC_REQ(TEST_IFC_REQ_WRITE, addr, data));
+	completion = readl(base + IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION);
+	reg = base + IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION;
+	ret = readl_poll_timeout(reg, completion, !(completion & BIT(0)),
+				 10, DWC_DPHY_TIMEOUT);
+	if (ret)
+		dev_err(dev, "DWC ifc request write timeout\n");
+
+	return ret;
+}
+
+static void dwc_dphy_ifc_write_mask(struct ipu6_isys *isys, u32 phy_id,
+				    u32 addr, u32 data, u8 shift, u8 width)
+{
+	u32 temp, mask;
+	int ret;
+
+	ret = dwc_dphy_ifc_read(isys, phy_id, addr, &temp);
+	if (ret)
+		return;
+
+	mask = (1 << width) - 1;
+	temp &= ~(mask << shift);
+	temp |= (data & mask) << shift;
+	dwc_dphy_ifc_write(isys, phy_id, addr, temp);
+}
+
+static u32 dwc_dphy_ifc_read_mask(struct ipu6_isys *isys, u32 phy_id, u32 addr,
+				  u8 shift, u8 width)
+{
+	int ret;
+	u32 val;
+
+	ret = dwc_dphy_ifc_read(isys, phy_id, addr, &val);
+	if (ret)
+		return 0;
+
+	return ((val >> shift) & ((1 << width) - 1));
+}
+
+static int dwc_dphy_pwr_up(struct ipu6_isys *isys, u32 phy_id)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	u32 fsm_state;
+	int ret;
+
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_RSTZ, 1);
+	usleep_range(10, 20);
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_SHUTDOWNZ, 1);
+
+	ret = read_poll_timeout(dwc_dphy_ifc_read_mask, fsm_state,
+				(fsm_state == PHY_FSM_STATE_IDLE ||
+				 fsm_state == PHY_FSM_STATE_ULP),
+				100, DWC_DPHY_TIMEOUT, false, isys,
+				phy_id, 0x1e, 0, 4);
+
+	if (ret)
+		dev_err(dev, "Dphy %d power up failed, state 0x%x", phy_id,
+			fsm_state);
+
+	return ret;
+}
+
+struct dwc_dphy_freq_range {
+	u8 hsfreq;
+	u16 min;
+	u16 max;
+	u16 default_mbps;
+	u16 osc_freq_target;
+};
+
+#define DPHY_FREQ_RANGE_NUM		(63)
+#define DPHY_FREQ_RANGE_INVALID_INDEX	(0xff)
+static const struct dwc_dphy_freq_range freqranges[DPHY_FREQ_RANGE_NUM] = {
+	{0x00,	80,	97,	80,	335},
+	{0x10,	80,	107,	90,	335},
+	{0x20,	84,	118,	100,	335},
+	{0x30,	93,	128,	110,	335},
+	{0x01,	103,	139,	120,	335},
+	{0x11,	112,	149,	130,	335},
+	{0x21,	122,	160,	140,	335},
+	{0x31,	131,	170,	150,	335},
+	{0x02,	141,	181,	160,	335},
+	{0x12,	150,	191,	170,	335},
+	{0x22,	160,	202,	180,	335},
+	{0x32,	169,	212,	190,	335},
+	{0x03,	183,	228,	205,	335},
+	{0x13,	198,	244,	220,	335},
+	{0x23,	212,	259,	235,	335},
+	{0x33,	226,	275,	250,	335},
+	{0x04,	250,	301,	275,	335},
+	{0x14,	274,	328,	300,	335},
+	{0x25,	297,	354,	325,	335},
+	{0x35,	321,	380,	350,	335},
+	{0x05,	369,	433,	400,	335},
+	{0x16,	416,	485,	450,	335},
+	{0x26,	464,	538,	500,	335},
+	{0x37,	511,	590,	550,	335},
+	{0x07,	559,	643,	600,	335},
+	{0x18,	606,	695,	650,	335},
+	{0x28,	654,	748,	700,	335},
+	{0x39,	701,	800,	750,	335},
+	{0x09,	749,	853,	800,	335},
+	{0x19,	796,	905,	850,	335},
+	{0x29,	844,	958,	900,	335},
+	{0x3a,	891,	1010,	950,	335},
+	{0x0a,	939,	1063,	1000,	335},
+	{0x1a,	986,	1115,	1050,	335},
+	{0x2a,	1034,	1168,	1100,	335},
+	{0x3b,	1081,	1220,	1150,	335},
+	{0x0b,	1129,	1273,	1200,	335},
+	{0x1b,	1176,	1325,	1250,	335},
+	{0x2b,	1224,	1378,	1300,	335},
+	{0x3c,	1271,	1430,	1350,	335},
+	{0x0c,	1319,	1483,	1400,	335},
+	{0x1c,	1366,	1535,	1450,	335},
+	{0x2c,	1414,	1588,	1500,	335},
+	{0x3d,	1461,	1640,	1550,	208},
+	{0x0d,	1509,	1693,	1600,	214},
+	{0x1d,	1556,	1745,	1650,	221},
+	{0x2e,	1604,	1798,	1700,	228},
+	{0x3e,	1651,	1850,	1750,	234},
+	{0x0e,	1699,	1903,	1800,	241},
+	{0x1e,	1746,	1955,	1850,	248},
+	{0x2f,	1794,	2008,	1900,	255},
+	{0x3f,	1841,	2060,	1950,	261},
+	{0x0f,	1889,	2113,	2000,	268},
+	{0x40,	1936,	2165,	2050,	275},
+	{0x41,	1984,	2218,	2100,	281},
+	{0x42,	2031,	2270,	2150,	288},
+	{0x43,	2079,	2323,	2200,	294},
+	{0x44,	2126,	2375,	2250,	302},
+	{0x45,	2174,	2428,	2300,	308},
+	{0x46,	2221,	2480,	2350,	315},
+	{0x47,	2269,	2500,	2400,	321},
+	{0x48,	2316,	2500,	2450,	328},
+	{0x49,	2364,	2500,	2500,	335}
+};
+
+static u16 get_hsfreq_by_mbps(u32 mbps)
+{
+	unsigned int i = DPHY_FREQ_RANGE_NUM;
+
+	while (i--) {
+		if (freqranges[i].default_mbps == mbps ||
+		    (mbps >= freqranges[i].min && mbps <= freqranges[i].max))
+			return i;
+	}
+
+	return DPHY_FREQ_RANGE_INVALID_INDEX;
+}
+
+static int ipu6_isys_dwc_phy_config(struct ipu6_isys *isys,
+				    u32 phy_id, u32 mbps)
+{
+	struct ipu6_bus_device *adev = isys->adev;
+	struct device *dev = &adev->auxdev.dev;
+	struct ipu6_device *isp = adev->isp;
+	u32 cfg_clk_freqrange;
+	u32 osc_freq_target;
+	u32 index;
+
+	dev_dbg(dev, "config Dphy %u with %u mbps", phy_id, mbps);
+
+	index = get_hsfreq_by_mbps(mbps);
+	if (index == DPHY_FREQ_RANGE_INVALID_INDEX) {
+		dev_err(dev, "link freq not found for mbps %u", mbps);
+		return -EINVAL;
+	}
+
+	dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_HSFREQRANGE,
+			    freqranges[index].hsfreq, 0, 7);
+
+	/* Force termination Calibration */
+	if (isys->phy_termcal_val) {
+		dwc_dphy_ifc_write_mask(isys, phy_id, 0x20a, 0x1, 0, 1);
+		dwc_dphy_ifc_write_mask(isys, phy_id, 0x209, 0x3, 0, 2);
+		dwc_dphy_ifc_write_mask(isys, phy_id, 0x209,
+					isys->phy_termcal_val, 4, 4);
+	}
+
+	/*
+	 * Enable override to configure the DDL target oscillation
+	 * frequency on bit 0 of register 0xe4
+	 */
+	dwc_dphy_ifc_write_mask(isys, phy_id, 0xe4, 0x1, 0, 1);
+	/*
+	 * configure registers 0xe2, 0xe3 with the
+	 * appropriate DDL target oscillation frequency
+	 * 0x1cc(460)
+	 */
+	osc_freq_target = freqranges[index].osc_freq_target;
+	dwc_dphy_ifc_write_mask(isys, phy_id, 0xe2,
+				osc_freq_target & 0xff, 0, 8);
+	dwc_dphy_ifc_write_mask(isys, phy_id, 0xe3,
+				(osc_freq_target >> 8) & 0xf, 0, 4);
+
+	if (mbps < 1500) {
+		/* deskew_polarity_rw, for < 1.5Gbps */
+		dwc_dphy_ifc_write_mask(isys, phy_id, 0x8, 0x1, 5, 1);
+	}
+
+	/*
+	 * Set cfgclkfreqrange[5:0] = round[(Fcfg_clk(MHz)-17)*4]
+	 * (38.4 - 17) * 4 = ~85 (0x55)
+	 */
+	cfg_clk_freqrange = (isp->buttress.ref_clk - 170) * 4 / 10;
+	dev_dbg(dev, "ref_clk = %u clk_freqrange = %u",
+		isp->buttress.ref_clk, cfg_clk_freqrange);
+	dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_CFGCLKFREQRANGE,
+			    cfg_clk_freqrange, 0, 8);
+
+	dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0x1, 4, 1);
+	dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0x1, 8, 1);
+
+	return 0;
+}
+
+static void ipu6_isys_dwc_phy_aggr_setup(struct ipu6_isys *isys, u32 master,
+					 u32 slave, u32 mbps)
+{
+	/* Config mastermacro */
+	dwc_dphy_ifc_write_mask(isys, master, 0x133, 0x1, 0, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x133, 0x0, 0, 1);
+
+	/* Config master PHY clk lane to drive long channel clk */
+	dwc_dphy_ifc_write_mask(isys, master, 0x307, 0x1, 2, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x307, 0x0, 2, 1);
+
+	/* Config both PHYs data lanes to get clk from long channel */
+	dwc_dphy_ifc_write_mask(isys, master, 0x508, 0x1, 5, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x508, 0x1, 5, 1);
+	dwc_dphy_ifc_write_mask(isys, master, 0x708, 0x1, 5, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x708, 0x1, 5, 1);
+
+	/* Config slave PHY clk lane to bypass long channel clk to DDR clk */
+	dwc_dphy_ifc_write_mask(isys, master, 0x308, 0x0, 3, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x308, 0x1, 3, 1);
+
+	/* Override slave PHY clk lane enable (DPHYRXCLK_CLL_demux module) */
+	dwc_dphy_ifc_write_mask(isys, slave, 0xe0, 0x3, 0, 2);
+
+	/* Override slave PHY DDR clk lane enable (DPHYHSRX_div124 module) */
+	dwc_dphy_ifc_write_mask(isys, slave, 0xe1, 0x1, 1, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x307, 0x1, 3, 1);
+
+	/* Turn off slave PHY LP-RX clk lane */
+	dwc_dphy_ifc_write_mask(isys, slave, 0x304, 0x1, 7, 1);
+	dwc_dphy_ifc_write_mask(isys, slave, 0x305, 0xa, 0, 5);
+}
+
+#define PHY_E	4
+static int ipu6_isys_dwc_phy_powerup_ack(struct ipu6_isys *isys, u32 phy_id)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	u32 rescal_done;
+	int ret;
+
+	ret = dwc_dphy_pwr_up(isys, phy_id);
+	if (ret != 0) {
+		dev_err(dev, "Dphy %u power up failed(%d)", phy_id, ret);
+		return ret;
+	}
+
+	/* reset forcerxmode */
+	dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0, 4, 1);
+	dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0, 8, 1);
+
+	dev_dbg(dev, "Dphy %u is ready!", phy_id);
+
+	if (phy_id != PHY_E || isys->phy_termcal_val)
+		return 0;
+
+	usleep_range(100, 200);
+	rescal_done = dwc_dphy_ifc_read_mask(isys, phy_id, 0x221, 7, 1);
+	if (rescal_done) {
+		isys->phy_termcal_val = dwc_dphy_ifc_read_mask(isys, phy_id,
+							       0x220, 2, 4);
+		dev_dbg(dev, "termcal done with value = %u",
+			isys->phy_termcal_val);
+	}
+
+	return 0;
+}
+
+static void ipu6_isys_dwc_phy_reset(struct ipu6_isys *isys, u32 phy_id)
+{
+	dev_dbg(&isys->adev->auxdev.dev, "Reset phy %u", phy_id);
+
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_SHUTDOWNZ, 0);
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_RSTZ, 0);
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_ACCESS_MODE,
+		       TEST_IFC_ACCESS_MODE_FSM);
+	dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_REQ,
+		       TEST_IFC_REQ_RESET);
+}
+
+int ipu6_isys_dwc_phy_set_power(struct ipu6_isys *isys,
+				struct ipu6_isys_csi2_config *cfg,
+				const struct ipu6_isys_csi2_timing *timing,
+				bool on)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	u32 phy_id, primary, secondary;
+	u32 nlanes, port, mbps;
+	s64 link_freq;
+	int ret;
+
+	port = cfg->port;
+
+	if (!isys_base || port >= isys->pdata->ipdata->csi2.nports) {
+		dev_warn(dev, "invalid port ID %d\n", port);
+		return -EINVAL;
+	}
+
+	nlanes = cfg->nlanes;
+	/* only port 0, 2 and 4 support 4 lanes */
+	if (nlanes == 4 && port % 2) {
+		dev_err(dev, "invalid csi-port %u with %u lanes\n", port,
+			nlanes);
+		return -EINVAL;
+	}
+
+	link_freq = ipu6_isys_csi2_get_link_freq(&isys->csi2[port]);
+	if (link_freq < 0) {
+		dev_err(dev, "get link freq failed(%lld).\n", link_freq);
+		return link_freq;
+	}
+
+	mbps = div_u64(link_freq, 500000);
+
+	phy_id = port;
+	primary = port & ~1;
+	secondary = primary + 1;
+	if (on) {
+		if (nlanes == 4) {
+			dev_dbg(dev, "config phy %u and %u in aggr mode\n",
+				primary, secondary);
+
+			ipu6_isys_dwc_phy_reset(isys, primary);
+			ipu6_isys_dwc_phy_reset(isys, secondary);
+			ipu6_isys_dwc_phy_aggr_setup(isys, primary,
+						     secondary, mbps);
+
+			ret = ipu6_isys_dwc_phy_config(isys, primary, mbps);
+			if (ret)
+				return ret;
+			ret = ipu6_isys_dwc_phy_config(isys, secondary, mbps);
+			if (ret)
+				return ret;
+
+			ret = ipu6_isys_dwc_phy_powerup_ack(isys, primary);
+			if (ret)
+				return ret;
+
+			ret = ipu6_isys_dwc_phy_powerup_ack(isys, secondary);
+			return ret;
+		}
+
+		dev_dbg(dev, "config phy %u with %u lanes in non-aggr mode\n",
+			phy_id, nlanes);
+
+		ipu6_isys_dwc_phy_reset(isys, phy_id);
+		ret = ipu6_isys_dwc_phy_config(isys, phy_id, mbps);
+		if (ret)
+			return ret;
+
+		ret = ipu6_isys_dwc_phy_powerup_ack(isys, phy_id);
+		return ret;
+	}
+
+	if (nlanes == 4) {
+		dev_dbg(dev, "Power down phy %u and phy %u for port %u\n",
+			primary, secondary, port);
+		ipu6_isys_dwc_phy_reset(isys, secondary);
+		ipu6_isys_dwc_phy_reset(isys, primary);
+
+		return 0;
+	}
+
+	dev_dbg(dev, "Powerdown phy %u with %u lanes\n", phy_id, nlanes);
+
+	ipu6_isys_dwc_phy_reset(isys, phy_id);
+
+	return 0;
+}
diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c b/drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c
new file mode 100644
index 000000000000..dcc7743e0cee
--- /dev/null
+++ b/drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c
@@ -0,0 +1,242 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 - 2023 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include "ipu6-bus.h"
+#include "ipu6-isys.h"
+#include "ipu6-isys-csi2.h"
+#include "ipu6-platform-isys-csi2-reg.h"
+
+/* only use BB0, BB2, BB4, and BB6 on PHY0 */
+#define IPU6SE_ISYS_PHY_BB_NUM		4
+#define IPU6SE_ISYS_PHY_0_BASE		0x10000
+
+#define PHY_CPHY_DLL_OVRD(x)		(0x100 + 0x100 * (x))
+#define PHY_CPHY_RX_CONTROL1(x)		(0x110 + 0x100 * (x))
+#define PHY_DPHY_CFG(x)			(0x148 + 0x100 * (x))
+#define PHY_BB_AFE_CONFIG(x)		(0x174 + 0x100 * (x))
+
+/*
+ * use port_cfg to configure that which data lanes used
+ * +---------+     +------+ +-----+
+ * | port0 x4<-----|      | |     |
+ * |         |     | port | |     |
+ * | port1 x2<-----|      | |     |
+ * |         |     |      <-| PHY |
+ * | port2 x4<-----|      | |     |
+ * |         |     |config| |     |
+ * | port3 x2<-----|      | |     |
+ * +---------+     +------+ +-----+
+ */
+static const unsigned int csi2_port_cfg[][3] = {
+	{0, 0, 0x1f}, /* no link */
+	{4, 0, 0x10}, /* x4 + x4 config */
+	{2, 0, 0x12}, /* x2 + x2 config */
+	{1, 0, 0x13}, /* x1 + x1 config */
+	{2, 1, 0x15}, /* x2x1 + x2x1 config */
+	{1, 1, 0x16}, /* x1x1 + x1x1 config */
+	{2, 2, 0x18}, /* x2x2 + x2x2 config */
+	{1, 2, 0x19} /* x1x2 + x1x2 config */
+};
+
+/* port, nlanes, bbindex, portcfg */
+static const unsigned int phy_port_cfg[][4] = {
+	/* sip0 */
+	{0, 1, 0, 0x15},
+	{0, 2, 0, 0x15},
+	{0, 4, 0, 0x15},
+	{0, 4, 2, 0x22},
+	/* sip1 */
+	{2, 1, 4, 0x15},
+	{2, 2, 4, 0x15},
+	{2, 4, 4, 0x15},
+	{2, 4, 6, 0x22}
+};
+
+static void ipu6_isys_csi2_phy_config_by_port(struct ipu6_isys *isys,
+					      unsigned int port,
+					      unsigned int nlanes)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *base = isys->adev->isp->base;
+	unsigned int bbnum;
+	u32 val, reg, i;
+
+	dev_dbg(dev, "port %u with %u lanes", port, nlanes);
+
+	/* only support <1.5Gbps */
+	for (i = 0; i < IPU6SE_ISYS_PHY_BB_NUM; i++) {
+		/* cphy_dll_ovrd.crcdc_fsm_dlane0 = 13 */
+		reg = IPU6SE_ISYS_PHY_0_BASE + PHY_CPHY_DLL_OVRD(i);
+		val = readl(base + reg);
+		val |= FIELD_PREP(GENMASK(6, 1), 13);
+		writel(val, base + reg);
+
+		/* cphy_rx_control1.en_crc1 = 1 */
+		reg = IPU6SE_ISYS_PHY_0_BASE + PHY_CPHY_RX_CONTROL1(i);
+		val = readl(base + reg);
+		val |= BIT(31);
+		writel(val, base + reg);
+
+		/* dphy_cfg.reserved = 1, .lden_from_dll_ovrd_0 = 1 */
+		reg = IPU6SE_ISYS_PHY_0_BASE + PHY_DPHY_CFG(i);
+		val = readl(base + reg);
+		val |= BIT(25) | BIT(26);
+		writel(val, base + reg);
+
+		/* cphy_dll_ovrd.lden_crcdc_fsm_dlane0 = 1 */
+		reg = IPU6SE_ISYS_PHY_0_BASE + PHY_CPHY_DLL_OVRD(i);
+		val = readl(base + reg);
+		val |= BIT(0);
+		writel(val, base + reg);
+	}
+
+	/* Front end config, use minimal channel loss */
+	for (i = 0; i < ARRAY_SIZE(phy_port_cfg); i++) {
+		if (phy_port_cfg[i][0] == port &&
+		    phy_port_cfg[i][1] == nlanes) {
+			bbnum = phy_port_cfg[i][2] / 2;
+			reg = IPU6SE_ISYS_PHY_0_BASE + PHY_BB_AFE_CONFIG(bbnum);
+			val = readl(base + reg);
+			val |= phy_port_cfg[i][3];
+			writel(val, base + reg);
+		}
+	}
+}
+
+static void ipu6_isys_csi2_rx_control(struct ipu6_isys *isys)
+{
+	void __iomem *base = isys->adev->isp->base;
+	u32 val, reg;
+
+	reg = CSI2_HUB_GPREG_SIP0_CSI_RX_A_CONTROL;
+	val = readl(base + reg);
+	val |= BIT(0);
+	writel(val, base + CSI2_HUB_GPREG_SIP0_CSI_RX_A_CONTROL);
+
+	reg = CSI2_HUB_GPREG_SIP0_CSI_RX_B_CONTROL;
+	val = readl(base + reg);
+	val |= BIT(0);
+	writel(val, base + CSI2_HUB_GPREG_SIP0_CSI_RX_B_CONTROL);
+
+	reg = CSI2_HUB_GPREG_SIP1_CSI_RX_A_CONTROL;
+	val = readl(base + reg);
+	val |= BIT(0);
+	writel(val, base + CSI2_HUB_GPREG_SIP1_CSI_RX_A_CONTROL);
+
+	reg = CSI2_HUB_GPREG_SIP1_CSI_RX_B_CONTROL;
+	val = readl(base + reg);
+	val |= BIT(0);
+	writel(val, base + CSI2_HUB_GPREG_SIP1_CSI_RX_B_CONTROL);
+}
+
+static int ipu6_isys_csi2_set_port_cfg(struct ipu6_isys *isys,
+				       unsigned int port, unsigned int nlanes)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	unsigned int sip = port / 2;
+	unsigned int index;
+
+	switch (nlanes) {
+	case 1:
+		index = 5;
+		break;
+	case 2:
+		index = 6;
+		break;
+	case 4:
+		index = 1;
+		break;
+	default:
+		dev_err(dev, "lanes nr %u is unsupported\n", nlanes);
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "port config for port %u with %u lanes\n",	port, nlanes);
+
+	writel(csi2_port_cfg[index][2],
+	       isys->pdata->base + CSI2_HUB_GPREG_SIP_FB_PORT_CFG(sip));
+
+	return 0;
+}
+
+static void
+ipu6_isys_csi2_set_timing(struct ipu6_isys *isys,
+			  const struct ipu6_isys_csi2_timing *timing,
+			  unsigned int port, unsigned int nlanes)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *reg;
+	u32 port_base;
+	u32 i;
+
+	port_base = (port % 2) ? CSI2_SIP_TOP_CSI_RX_PORT_BASE_1(port) :
+		CSI2_SIP_TOP_CSI_RX_PORT_BASE_0(port);
+
+	dev_dbg(dev, "set timing for port %u with %u lanes\n", port, nlanes);
+
+	reg = isys->pdata->base + port_base;
+	reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_TERMEN_CLANE;
+
+	writel(timing->ctermen, reg);
+
+	reg = isys->pdata->base + port_base;
+	reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_SETTLE_CLANE;
+	writel(timing->csettle, reg);
+
+	for (i = 0; i < nlanes; i++) {
+		reg = isys->pdata->base + port_base;
+		reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_TERMEN_DLANE(i);
+		writel(timing->dtermen, reg);
+
+		reg = isys->pdata->base + port_base;
+		reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_SETTLE_DLANE(i);
+		writel(timing->dsettle, reg);
+	}
+}
+
+#define DPHY_TIMER_INCR	0x28
+int ipu6_isys_jsl_phy_set_power(struct ipu6_isys *isys,
+				struct ipu6_isys_csi2_config *cfg,
+				const struct ipu6_isys_csi2_timing *timing,
+				bool on)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	int ret = 0;
+	u32 nlanes;
+	u32 port;
+
+	if (!on)
+		return 0;
+
+	port = cfg->port;
+	nlanes = cfg->nlanes;
+
+	if (!isys_base || port >= isys->pdata->ipdata->csi2.nports) {
+		dev_warn(dev, "invalid port ID %d\n", port);
+		return -EINVAL;
+	}
+
+	ipu6_isys_csi2_phy_config_by_port(isys, port, nlanes);
+
+	writel(DPHY_TIMER_INCR,
+	       isys->pdata->base + CSI2_HUB_GPREG_DPHY_TIMER_INCR);
+
+	/* set port cfg and rx timing */
+	ipu6_isys_csi2_set_timing(isys, timing, port, nlanes);
+
+	ret = ipu6_isys_csi2_set_port_cfg(isys, port, nlanes);
+	if (ret)
+		return ret;
+
+	ipu6_isys_csi2_rx_control(isys);
+
+	return 0;
+}
diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c b/drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c
new file mode 100644
index 000000000000..9abf389a05f1
--- /dev/null
+++ b/drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c
@@ -0,0 +1,720 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 - 2023 Intel Corporation
+ */
+
+#include <linux/bits.h>
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/list.h>
+#include <linux/refcount.h>
+#include <linux/time64.h>
+
+#include <media/v4l2-async.h>
+
+#include "ipu6.h"
+#include "ipu6-bus.h"
+#include "ipu6-isys.h"
+#include "ipu6-isys-csi2.h"
+#include "ipu6-platform-isys-csi2-reg.h"
+
+#define CSI_REG_HUB_GPREG_PHY_CTL(id) (CSI_REG_BASE + 0x18008 + (id) * 0x8)
+#define CSI_REG_HUB_GPREG_PHY_CTL_RESET			BIT(4)
+#define CSI_REG_HUB_GPREG_PHY_CTL_PWR_EN		BIT(0)
+#define CSI_REG_HUB_GPREG_PHY_STATUS(id) (CSI_REG_BASE + 0x1800c + (id) * 0x8)
+#define CSI_REG_HUB_GPREG_PHY_POWER_ACK			BIT(0)
+#define CSI_REG_HUB_GPREG_PHY_READY			BIT(4)
+
+#define MCD_PHY_POWER_STATUS_TIMEOUT			(200 * USEC_PER_MSEC)
+
+/*
+ * bridge to phy in buttress reg map, each phy has 16 kbytes
+ * only 2 phys for TGL U and Y
+ */
+#define IPU6_ISYS_MCD_PHY_BASE(i)			(0x10000 + (i) * 0x4000)
+
+/*
+ *  There are 2 MCD DPHY instances on TGL and 1 MCD DPHY instance on ADL.
+ *  Each MCD PHY has 12-lanes which has 8 data lanes and 4 clock lanes.
+ *  CSI port 1, 3 (5, 7) can support max 2 data lanes.
+ *  CSI port 0, 2 (4, 6) can support max 4 data lanes.
+ *  PHY configurations are PPI based instead of port.
+ *  Left:
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | PPI     | PPI5    | PPI4    | PPI3    | PPI2   | PPI1    | PPI0     |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x4      | unused  | D3      | D2      | C0     | D0      | D1       |
+ *  |---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x2x2    | C1      | D0      | D1      | C0     | D0      | D1       |
+ *  ----------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x2x1    | C1      | D0      | unused  | C0     | D0      | D1       |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x1x1    | C1      | D0      | unused  | C0     | D0      | unused   |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x1x2    | C1      | D0      | D1      | C0     | D0      | unused   |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *
+ *  Right:
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | PPI     | PPI6    | PPI7    | PPI8    | PPI9   | PPI10   | PPI11    |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x4      | D1      | D0      | C2      | D2     | D3      | unused   |
+ *  |---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x2x2    | D1      | D0      | C2      | D1     | D0      | C3       |
+ *  ----------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x2x1    | D1      | D0      | C2      | unused | D0      | C3       |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x1x1    | unused  | D0      | C2      | unused | D0      | C3       |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *  |         |         |         |         |        |         |          |
+ *  | x1x2    | unused  | D0      | C2      | D1     | D0      | C3       |
+ *  +---------+---------+---------+---------+--------+---------+----------+
+ *
+ * ppi mapping per phy :
+ *
+ * x4 + x4:
+ * Left : port0 - PPI range {0, 1, 2, 3, 4}
+ * Right: port2 - PPI range {6, 7, 8, 9, 10}
+ *
+ * x4 + x2x2:
+ * Left: port0 - PPI range {0, 1, 2, 3, 4}
+ * Right: port2 - PPI range {6, 7, 8}, port3 - PPI range {9, 10, 11}
+ *
+ * x2x2 + x4:
+ * Left: port0 - PPI range {0, 1, 2}, port1 - PPI range {3, 4, 5}
+ * Right: port2 - PPI range {6, 7, 8, 9, 10}
+ *
+ * x2x2 + x2x2:
+ * Left : port0 - PPI range {0, 1, 2}, port1 - PPI range {3, 4, 5}
+ * Right: port2 - PPI range {6, 7, 8}, port3 - PPI range {9, 10, 11}
+ */
+
+struct phy_reg {
+	u32 reg;
+	u32 val;
+};
+
+static const struct phy_reg common_init_regs[] = {
+	/* for TGL-U, use 0x80000000 */
+	{0x00000040, 0x80000000},
+	{0x00000044, 0x00a80880},
+	{0x00000044, 0x00b80880},
+	{0x00000010, 0x0000078c},
+	{0x00000344, 0x2f4401e2},
+	{0x00000544, 0x924401e2},
+	{0x00000744, 0x594401e2},
+	{0x00000944, 0x624401e2},
+	{0x00000b44, 0xfc4401e2},
+	{0x00000d44, 0xc54401e2},
+	{0x00000f44, 0x034401e2},
+	{0x00001144, 0x8f4401e2},
+	{0x00001344, 0x754401e2},
+	{0x00001544, 0xe94401e2},
+	{0x00001744, 0xcb4401e2},
+	{0x00001944, 0xfa4401e2}
+};
+
+static const struct phy_reg x1_port0_config_regs[] = {
+	{0x00000694, 0xc80060fa},
+	{0x00000680, 0x3d4f78ea},
+	{0x00000690, 0x10a0140b},
+	{0x000006a8, 0xdf04010a},
+	{0x00000700, 0x57050060},
+	{0x00000710, 0x0030001c},
+	{0x00000738, 0x5f004444},
+	{0x0000073c, 0x78464204},
+	{0x00000748, 0x7821f940},
+	{0x0000074c, 0xb2000433},
+	{0x00000494, 0xfe6030fa},
+	{0x00000480, 0x29ef5ed0},
+	{0x00000490, 0x10a0540b},
+	{0x000004a8, 0x7a01010a},
+	{0x00000500, 0xef053460},
+	{0x00000510, 0xe030101c},
+	{0x00000538, 0xdf808444},
+	{0x0000053c, 0xc8422204},
+	{0x00000540, 0x0180088c},
+	{0x00000574, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x1_port1_config_regs[] = {
+	{0x00000c94, 0xc80060fa},
+	{0x00000c80, 0xcf47abea},
+	{0x00000c90, 0x10a0840b},
+	{0x00000ca8, 0xdf04010a},
+	{0x00000d00, 0x57050060},
+	{0x00000d10, 0x0030001c},
+	{0x00000d38, 0x5f004444},
+	{0x00000d3c, 0x78464204},
+	{0x00000d48, 0x7821f940},
+	{0x00000d4c, 0xb2000433},
+	{0x00000a94, 0xc91030fa},
+	{0x00000a80, 0x5a166ed0},
+	{0x00000a90, 0x10a0540b},
+	{0x00000aa8, 0x5d060100},
+	{0x00000b00, 0xef053460},
+	{0x00000b10, 0xa030101c},
+	{0x00000b38, 0xdf808444},
+	{0x00000b3c, 0xc8422204},
+	{0x00000b40, 0x0180088c},
+	{0x00000b74, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x1_port2_config_regs[] = {
+	{0x00001294, 0x28f000fa},
+	{0x00001280, 0x08130cea},
+	{0x00001290, 0x10a0140b},
+	{0x000012a8, 0xd704010a},
+	{0x00001300, 0x8d050060},
+	{0x00001310, 0x0030001c},
+	{0x00001338, 0xdf008444},
+	{0x0000133c, 0x78422204},
+	{0x00001348, 0x7821f940},
+	{0x0000134c, 0x5a000433},
+	{0x00001094, 0x2d20b0fa},
+	{0x00001080, 0xade75dd0},
+	{0x00001090, 0x10a0540b},
+	{0x000010a8, 0xb101010a},
+	{0x00001100, 0x33053460},
+	{0x00001110, 0x0030101c},
+	{0x00001138, 0xdf808444},
+	{0x0000113c, 0xc8422204},
+	{0x00001140, 0x8180088c},
+	{0x00001174, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x1_port3_config_regs[] = {
+	{0x00001894, 0xc80060fa},
+	{0x00001880, 0x0f90fd6a},
+	{0x00001890, 0x10a0840b},
+	{0x000018a8, 0xdf04010a},
+	{0x00001900, 0x57050060},
+	{0x00001910, 0x0030001c},
+	{0x00001938, 0x5f004444},
+	{0x0000193c, 0x78464204},
+	{0x00001948, 0x7821f940},
+	{0x0000194c, 0xb2000433},
+	{0x00001694, 0x3050d0fa},
+	{0x00001680, 0x0ef6d050},
+	{0x00001690, 0x10a0540b},
+	{0x000016a8, 0xe301010a},
+	{0x00001700, 0x69053460},
+	{0x00001710, 0xa030101c},
+	{0x00001738, 0xdf808444},
+	{0x0000173c, 0xc8422204},
+	{0x00001740, 0x0180088c},
+	{0x00001774, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x2_port0_config_regs[] = {
+	{0x00000694, 0xc80060fa},
+	{0x00000680, 0x3d4f78ea},
+	{0x00000690, 0x10a0140b},
+	{0x000006a8, 0xdf04010a},
+	{0x00000700, 0x57050060},
+	{0x00000710, 0x0030001c},
+	{0x00000738, 0x5f004444},
+	{0x0000073c, 0x78464204},
+	{0x00000748, 0x7821f940},
+	{0x0000074c, 0xb2000433},
+	{0x00000494, 0xc80060fa},
+	{0x00000480, 0x29ef5ed8},
+	{0x00000490, 0x10a0540b},
+	{0x000004a8, 0x7a01010a},
+	{0x00000500, 0xef053460},
+	{0x00000510, 0xe030101c},
+	{0x00000538, 0xdf808444},
+	{0x0000053c, 0xc8422204},
+	{0x00000540, 0x0180088c},
+	{0x00000574, 0x00000000},
+	{0x00000294, 0xc80060fa},
+	{0x00000280, 0xcb45b950},
+	{0x00000290, 0x10a0540b},
+	{0x000002a8, 0x8c01010a},
+	{0x00000300, 0xef053460},
+	{0x00000310, 0x8030101c},
+	{0x00000338, 0x41808444},
+	{0x0000033c, 0x32422204},
+	{0x00000340, 0x0180088c},
+	{0x00000374, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x2_port1_config_regs[] = {
+	{0x00000c94, 0xc80060fa},
+	{0x00000c80, 0xcf47abea},
+	{0x00000c90, 0x10a0840b},
+	{0x00000ca8, 0xdf04010a},
+	{0x00000d00, 0x57050060},
+	{0x00000d10, 0x0030001c},
+	{0x00000d38, 0x5f004444},
+	{0x00000d3c, 0x78464204},
+	{0x00000d48, 0x7821f940},
+	{0x00000d4c, 0xb2000433},
+	{0x00000a94, 0xc80060fa},
+	{0x00000a80, 0x5a166ed8},
+	{0x00000a90, 0x10a0540b},
+	{0x00000aa8, 0x7a01010a},
+	{0x00000b00, 0xef053460},
+	{0x00000b10, 0xa030101c},
+	{0x00000b38, 0xdf808444},
+	{0x00000b3c, 0xc8422204},
+	{0x00000b40, 0x0180088c},
+	{0x00000b74, 0x00000000},
+	{0x00000894, 0xc80060fa},
+	{0x00000880, 0x4d4f21d0},
+	{0x00000890, 0x10a0540b},
+	{0x000008a8, 0x5601010a},
+	{0x00000900, 0xef053460},
+	{0x00000910, 0x8030101c},
+	{0x00000938, 0xdf808444},
+	{0x0000093c, 0xc8422204},
+	{0x00000940, 0x0180088c},
+	{0x00000974, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x2_port2_config_regs[] = {
+	{0x00001294, 0xc80060fa},
+	{0x00001280, 0x08130cea},
+	{0x00001290, 0x10a0140b},
+	{0x000012a8, 0xd704010a},
+	{0x00001300, 0x8d050060},
+	{0x00001310, 0x0030001c},
+	{0x00001338, 0xdf008444},
+	{0x0000133c, 0x78422204},
+	{0x00001348, 0x7821f940},
+	{0x0000134c, 0x5a000433},
+	{0x00001094, 0xc80060fa},
+	{0x00001080, 0xade75dd8},
+	{0x00001090, 0x10a0540b},
+	{0x000010a8, 0xb101010a},
+	{0x00001100, 0x33053460},
+	{0x00001110, 0x0030101c},
+	{0x00001138, 0xdf808444},
+	{0x0000113c, 0xc8422204},
+	{0x00001140, 0x8180088c},
+	{0x00001174, 0x00000000},
+	{0x00000e94, 0xc80060fa},
+	{0x00000e80, 0x0fbf16d0},
+	{0x00000e90, 0x10a0540b},
+	{0x00000ea8, 0x7a01010a},
+	{0x00000f00, 0xf5053460},
+	{0x00000f10, 0xc030101c},
+	{0x00000f38, 0xdf808444},
+	{0x00000f3c, 0xc8422204},
+	{0x00000f40, 0x8180088c},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x2_port3_config_regs[] = {
+	{0x00001894, 0xc80060fa},
+	{0x00001880, 0x0f90fd6a},
+	{0x00001890, 0x10a0840b},
+	{0x000018a8, 0xdf04010a},
+	{0x00001900, 0x57050060},
+	{0x00001910, 0x0030001c},
+	{0x00001938, 0x5f004444},
+	{0x0000193c, 0x78464204},
+	{0x00001948, 0x7821f940},
+	{0x0000194c, 0xb2000433},
+	{0x00001694, 0xc80060fa},
+	{0x00001680, 0x0ef6d058},
+	{0x00001690, 0x10a0540b},
+	{0x000016a8, 0x7a01010a},
+	{0x00001700, 0x69053460},
+	{0x00001710, 0xa030101c},
+	{0x00001738, 0xdf808444},
+	{0x0000173c, 0xc8422204},
+	{0x00001740, 0x0180088c},
+	{0x00001774, 0x00000000},
+	{0x00001494, 0xc80060fa},
+	{0x00001480, 0xf9d34bd0},
+	{0x00001490, 0x10a0540b},
+	{0x000014a8, 0x7a01010a},
+	{0x00001500, 0x1b053460},
+	{0x00001510, 0x0030101c},
+	{0x00001538, 0xdf808444},
+	{0x0000153c, 0xc8422204},
+	{0x00001540, 0x8180088c},
+	{0x00001574, 0x00000000},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x4_port0_config_regs[] = {
+	{0x00000694, 0xc80060fa},
+	{0x00000680, 0x3d4f78fa},
+	{0x00000690, 0x10a0140b},
+	{0x000006a8, 0xdf04010a},
+	{0x00000700, 0x57050060},
+	{0x00000710, 0x0030001c},
+	{0x00000738, 0x5f004444},
+	{0x0000073c, 0x78464204},
+	{0x00000748, 0x7821f940},
+	{0x0000074c, 0xb2000433},
+	{0x00000494, 0xfe6030fa},
+	{0x00000480, 0x29ef5ed8},
+	{0x00000490, 0x10a0540b},
+	{0x000004a8, 0x7a01010a},
+	{0x00000500, 0xef053460},
+	{0x00000510, 0xe030101c},
+	{0x00000538, 0xdf808444},
+	{0x0000053c, 0xc8422204},
+	{0x00000540, 0x0180088c},
+	{0x00000574, 0x00000004},
+	{0x00000294, 0x23e030fa},
+	{0x00000280, 0xcb45b950},
+	{0x00000290, 0x10a0540b},
+	{0x000002a8, 0x8c01010a},
+	{0x00000300, 0xef053460},
+	{0x00000310, 0x8030101c},
+	{0x00000338, 0x41808444},
+	{0x0000033c, 0x32422204},
+	{0x00000340, 0x0180088c},
+	{0x00000374, 0x00000004},
+	{0x00000894, 0x5620b0fa},
+	{0x00000880, 0x4d4f21dc},
+	{0x00000890, 0x10a0540b},
+	{0x000008a8, 0x5601010a},
+	{0x00000900, 0xef053460},
+	{0x00000910, 0x8030101c},
+	{0x00000938, 0xdf808444},
+	{0x0000093c, 0xc8422204},
+	{0x00000940, 0x0180088c},
+	{0x00000974, 0x00000004},
+	{0x00000a94, 0xc91030fa},
+	{0x00000a80, 0x5a166ecc},
+	{0x00000a90, 0x10a0540b},
+	{0x00000aa8, 0x5d01010a},
+	{0x00000b00, 0xef053460},
+	{0x00000b10, 0xa030101c},
+	{0x00000b38, 0xdf808444},
+	{0x00000b3c, 0xc8422204},
+	{0x00000b40, 0x0180088c},
+	{0x00000b74, 0x00000004},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x4_port1_config_regs[] = {
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x4_port2_config_regs[] = {
+	{0x00001294, 0x28f000fa},
+	{0x00001280, 0x08130cfa},
+	{0x00001290, 0x10c0140b},
+	{0x000012a8, 0xd704010a},
+	{0x00001300, 0x8d050060},
+	{0x00001310, 0x0030001c},
+	{0x00001338, 0xdf008444},
+	{0x0000133c, 0x78422204},
+	{0x00001348, 0x7821f940},
+	{0x0000134c, 0x5a000433},
+	{0x00001094, 0x2d20b0fa},
+	{0x00001080, 0xade75dd8},
+	{0x00001090, 0x10a0540b},
+	{0x000010a8, 0xb101010a},
+	{0x00001100, 0x33053460},
+	{0x00001110, 0x0030101c},
+	{0x00001138, 0xdf808444},
+	{0x0000113c, 0xc8422204},
+	{0x00001140, 0x8180088c},
+	{0x00001174, 0x00000004},
+	{0x00000e94, 0xd308d0fa},
+	{0x00000e80, 0x0fbf16d0},
+	{0x00000e90, 0x10a0540b},
+	{0x00000ea8, 0x2c01010a},
+	{0x00000f00, 0xf5053460},
+	{0x00000f10, 0xc030101c},
+	{0x00000f38, 0xdf808444},
+	{0x00000f3c, 0xc8422204},
+	{0x00000f40, 0x8180088c},
+	{0x00000f74, 0x00000004},
+	{0x00001494, 0x136850fa},
+	{0x00001480, 0xf9d34bdc},
+	{0x00001490, 0x10a0540b},
+	{0x000014a8, 0x5a01010a},
+	{0x00001500, 0x1b053460},
+	{0x00001510, 0x0030101c},
+	{0x00001538, 0xdf808444},
+	{0x0000153c, 0xc8422204},
+	{0x00001540, 0x8180088c},
+	{0x00001574, 0x00000004},
+	{0x00001694, 0x3050d0fa},
+	{0x00001680, 0x0ef6d04c},
+	{0x00001690, 0x10a0540b},
+	{0x000016a8, 0xe301010a},
+	{0x00001700, 0x69053460},
+	{0x00001710, 0xa030101c},
+	{0x00001738, 0xdf808444},
+	{0x0000173c, 0xc8422204},
+	{0x00001740, 0x0180088c},
+	{0x00001774, 0x00000004},
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg x4_port3_config_regs[] = {
+	{0x00000000, 0x00000000}
+};
+
+static const struct phy_reg *x1_config_regs[4] = {
+	x1_port0_config_regs,
+	x1_port1_config_regs,
+	x1_port2_config_regs,
+	x1_port3_config_regs
+};
+
+static const struct phy_reg *x2_config_regs[4] = {
+	x2_port0_config_regs,
+	x2_port1_config_regs,
+	x2_port2_config_regs,
+	x2_port3_config_regs
+};
+
+static const struct phy_reg *x4_config_regs[4] = {
+	x4_port0_config_regs,
+	x4_port1_config_regs,
+	x4_port2_config_regs,
+	x4_port3_config_regs
+};
+
+static const struct phy_reg **config_regs[3] = {
+	x1_config_regs,
+	x2_config_regs,
+	x4_config_regs
+};
+
+static int ipu6_isys_mcd_phy_powerup_ack(struct ipu6_isys *isys, u8 id)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	u32 val;
+	int ret;
+
+	val = readl(isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id));
+	val |= CSI_REG_HUB_GPREG_PHY_CTL_PWR_EN;
+	writel(val, isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id));
+
+	ret = readl_poll_timeout(isys_base + CSI_REG_HUB_GPREG_PHY_STATUS(id),
+				 val, val & CSI_REG_HUB_GPREG_PHY_POWER_ACK,
+				 200, MCD_PHY_POWER_STATUS_TIMEOUT);
+	if (ret)
+		dev_err(dev, "PHY%d powerup ack timeout", id);
+
+	return ret;
+}
+
+static int ipu6_isys_mcd_phy_powerdown_ack(struct ipu6_isys *isys, u8 id)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	u32 val;
+	int ret;
+
+	writel(0, isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id));
+	ret = readl_poll_timeout(isys_base + CSI_REG_HUB_GPREG_PHY_STATUS(id),
+				 val, !(val & CSI_REG_HUB_GPREG_PHY_POWER_ACK),
+				 200, MCD_PHY_POWER_STATUS_TIMEOUT);
+	if (ret)
+		dev_err(dev, "PHY%d powerdown ack timeout", id);
+
+	return ret;
+}
+
+static void ipu6_isys_mcd_phy_reset(struct ipu6_isys *isys, u8 id, bool assert)
+{
+	void __iomem *isys_base = isys->pdata->base;
+	u32 val;
+
+	val = readl(isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id));
+	if (assert)
+		val |= CSI_REG_HUB_GPREG_PHY_CTL_RESET;
+	else
+		val &= ~(CSI_REG_HUB_GPREG_PHY_CTL_RESET);
+
+	writel(val, isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id));
+}
+
+static int ipu6_isys_mcd_phy_ready(struct ipu6_isys *isys, u8 id)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	u32 val;
+	int ret;
+
+	ret = readl_poll_timeout(isys_base + CSI_REG_HUB_GPREG_PHY_STATUS(id),
+				 val, val & CSI_REG_HUB_GPREG_PHY_READY,
+				 200, MCD_PHY_POWER_STATUS_TIMEOUT);
+	if (ret)
+		dev_err(dev, "PHY%d ready ack timeout", id);
+
+	return ret;
+}
+
+static void ipu6_isys_mcd_phy_common_init(struct ipu6_isys *isys)
+{
+	struct ipu6_bus_device *adev = isys->adev;
+	struct ipu6_device *isp = adev->isp;
+	void __iomem *isp_base = isp->base;
+	struct sensor_async_sd *s_asd;
+	struct v4l2_async_connection *asc;
+	void __iomem *phy_base;
+	unsigned int i;
+	u8 phy_id;
+
+	list_for_each_entry(asc, &isys->notifier.done_list, asc_entry) {
+		s_asd = container_of(asc, struct sensor_async_sd, asc);
+		phy_id = s_asd->csi2.port / 4;
+		phy_base = isp_base + IPU6_ISYS_MCD_PHY_BASE(phy_id);
+
+		for (i = 0; i < ARRAY_SIZE(common_init_regs); i++)
+			writel(common_init_regs[i].val,
+			       phy_base + common_init_regs[i].reg);
+	}
+}
+
+static int ipu6_isys_driver_port_to_phy_port(struct ipu6_isys_csi2_config *cfg)
+{
+	int phy_port;
+	int ret;
+
+	if (!(cfg->nlanes == 4 || cfg->nlanes == 2 || cfg->nlanes == 1))
+		return -EINVAL;
+
+	/* B,F -> C0 A,E -> C1 C,G -> C2 D,H -> C4 */
+	/* normalize driver port number */
+	phy_port = cfg->port % 4;
+
+	/* swap port number only for A and B */
+	if (phy_port == 0)
+		phy_port = 1;
+	else if (phy_port == 1)
+		phy_port = 0;
+
+	ret = phy_port;
+
+	/* check validity per lane configuration */
+	if (cfg->nlanes == 4 && !(phy_port == 0 || phy_port == 2))
+		ret = -EINVAL;
+	else if ((cfg->nlanes == 2 || cfg->nlanes == 1) &&
+		 !(phy_port >= 0 && phy_port <= 3))
+		ret = -EINVAL;
+
+	return ret;
+}
+
+static int ipu6_isys_mcd_phy_config(struct ipu6_isys *isys)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	struct ipu6_bus_device *adev = isys->adev;
+	const struct phy_reg **phy_config_regs;
+	struct ipu6_device *isp = adev->isp;
+	void __iomem *isp_base = isp->base;
+	struct sensor_async_sd *s_asd;
+	struct ipu6_isys_csi2_config cfg;
+	struct v4l2_async_connection *asc;
+	u8 phy_port, phy_id;
+	unsigned int i;
+	void __iomem *phy_base;
+
+	list_for_each_entry(asc, &isys->notifier.done_list, asc_entry) {
+		s_asd = container_of(asc, struct sensor_async_sd, asc);
+		cfg.port = s_asd->csi2.port;
+		cfg.nlanes = s_asd->csi2.nlanes;
+		phy_port = ipu6_isys_driver_port_to_phy_port(&cfg);
+		if (phy_port < 0) {
+			dev_err(dev, "invalid port %d for lane %d", cfg.port,
+				cfg.nlanes);
+			return -ENXIO;
+		}
+
+		phy_id = cfg.port / 4;
+		phy_base = isp_base + IPU6_ISYS_MCD_PHY_BASE(phy_id);
+		dev_dbg(dev, "port%d PHY%u lanes %u\n", cfg.port, phy_id,
+			cfg.nlanes);
+
+		phy_config_regs = config_regs[cfg.nlanes / 2];
+		cfg.port = phy_port;
+		for (i = 0; phy_config_regs[cfg.port][i].reg; i++)
+			writel(phy_config_regs[cfg.port][i].val,
+			       phy_base + phy_config_regs[cfg.port][i].reg);
+	}
+
+	return 0;
+}
+
+#define CSI_MCD_PHY_NUM		2
+static refcount_t phy_power_ref_count[CSI_MCD_PHY_NUM];
+
+int ipu6_isys_mcd_phy_set_power(struct ipu6_isys *isys,
+				struct ipu6_isys_csi2_config *cfg,
+				const struct ipu6_isys_csi2_timing *timing,
+				bool on)
+{
+	struct device *dev = &isys->adev->auxdev.dev;
+	void __iomem *isys_base = isys->pdata->base;
+	u8 port, phy_id;
+	refcount_t *ref;
+	int ret;
+
+	port = cfg->port;
+	phy_id = port / 4;
+
+	ref = &phy_power_ref_count[phy_id];
+
+	dev_dbg(dev, "for phy %d port %d, lanes: %d\n", phy_id, port,
+		cfg->nlanes);
+
+	if (!isys_base || port >= isys->pdata->ipdata->csi2.nports) {
+		dev_warn(dev, "invalid port ID %d\n", port);
+		return -EINVAL;
+	}
+
+	if (on) {
+		if (refcount_read(ref)) {
+			dev_dbg(dev, "for phy %d is already UP", phy_id);
+			refcount_inc(ref);
+			return 0;
+		}
+
+		ret = ipu6_isys_mcd_phy_powerup_ack(isys, phy_id);
+		if (ret)
+			return ret;
+
+		ipu6_isys_mcd_phy_reset(isys, phy_id, 0);
+		ipu6_isys_mcd_phy_common_init(isys);
+
+		ret = ipu6_isys_mcd_phy_config(isys);
+		if (ret)
+			return ret;
+
+		ipu6_isys_mcd_phy_reset(isys, phy_id, 1);
+		ret = ipu6_isys_mcd_phy_ready(isys, phy_id);
+		if (ret)
+			return ret;
+
+		refcount_set(ref, 1);
+		return 0;
+	}
+
+	if (!refcount_dec_and_test(ref))
+		return 0;
+
+	return ipu6_isys_mcd_phy_powerdown_ack(isys, phy_id);
+}