diff mbox series

[4/6] media: chips-media: wave5: separate irq setup routine

Message ID 20240318144225.30835-5-brnkv.i1@gmail.com (mailing list archive)
State New, archived
Headers show
Series Wave515 decoder IP support | expand

Commit Message

Ivan Bornyakov March 18, 2024, 2:42 p.m. UTC 
Separate interrupts setup routine to reduce code duplication. Also
enable interrupts based on vpu_attr->support_encoders and
vpu_attr->support_decoders fields to facilitate other Wave5xx IPs
support, because not all of them are both encoders and decoders.

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
---
 .../platform/chips-media/wave5/wave5-hw.c     | 53 +++++++++----------
 1 file changed, 24 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/chips-media/wave5/wave5-hw.c b/drivers/media/platform/chips-media/wave5/wave5-hw.c
index 2d82791f575e..cdd0a0948a94 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-hw.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-hw.c
@@ -299,6 +299,27 @@  static int wave5_send_query(struct vpu_device *vpu_dev, struct vpu_instance *ins
 	return wave5_vpu_firmware_command_queue_error_check(vpu_dev, NULL);
 }
 
+static void setup_wave5_interrupts(struct vpu_device *vpu_dev)
+{
+	u32 reg_val = 0;
+
+	if (vpu_dev->attr.support_encoders) {
+		/* Encoder interrupt */
+		reg_val |= BIT(INT_WAVE5_ENC_SET_PARAM);
+		reg_val |= BIT(INT_WAVE5_ENC_PIC);
+		reg_val |= BIT(INT_WAVE5_BSBUF_FULL);
+	}
+
+	if (vpu_dev->attr.support_decoders) {
+		/* Decoder interrupt */
+		reg_val |= BIT(INT_WAVE5_INIT_SEQ);
+		reg_val |= BIT(INT_WAVE5_DEC_PIC);
+		reg_val |= BIT(INT_WAVE5_BSBUF_EMPTY);
+	}
+
+	return vpu_write_reg(vpu_dev, W5_VPU_VINT_ENABLE, reg_val);
+}
+
 static int setup_wave5_properties(struct device *dev)
 {
 	struct vpu_device *vpu_dev = dev_get_drvdata(dev);
@@ -340,6 +361,8 @@  static int setup_wave5_properties(struct device *dev)
 	p_attr->support_vcpu_backbone = FIELD_GET(FEATURE_VCPU_BACKBONE, hw_config_def0);
 	p_attr->support_vcore_backbone = FIELD_GET(FEATURE_VCORE_BACKBONE, hw_config_def0);
 
+	setup_wave5_interrupts(vpu_dev);
+
 	return 0;
 }
 
@@ -417,16 +440,6 @@  int wave5_vpu_init(struct device *dev, u8 *fw, size_t size)
 	wave5_fio_writel(vpu_dev, W5_BACKBONE_AXI_PARAM, 0);
 	vpu_write_reg(vpu_dev, W5_SEC_AXI_PARAM, 0);
 
-	/* Encoder interrupt */
-	reg_val = BIT(INT_WAVE5_ENC_SET_PARAM);
-	reg_val |= BIT(INT_WAVE5_ENC_PIC);
-	reg_val |= BIT(INT_WAVE5_BSBUF_FULL);
-	/* Decoder interrupt */
-	reg_val |= BIT(INT_WAVE5_INIT_SEQ);
-	reg_val |= BIT(INT_WAVE5_DEC_PIC);
-	reg_val |= BIT(INT_WAVE5_BSBUF_EMPTY);
-	vpu_write_reg(vpu_dev, W5_VPU_VINT_ENABLE, reg_val);
-
 	reg_val = vpu_read_reg(vpu_dev, W5_VPU_RET_VPU_CONFIG0);
 	if (FIELD_GET(FEATURE_BACKBONE, reg_val)) {
 		reg_val = ((WAVE5_PROC_AXI_ID << 28) |
@@ -1034,16 +1047,6 @@  int wave5_vpu_re_init(struct device *dev, u8 *fw, size_t size)
 		wave5_fio_writel(vpu_dev, W5_BACKBONE_AXI_PARAM, 0);
 		vpu_write_reg(vpu_dev, W5_SEC_AXI_PARAM, 0);
 
-		/* Encoder interrupt */
-		reg_val = BIT(INT_WAVE5_ENC_SET_PARAM);
-		reg_val |= BIT(INT_WAVE5_ENC_PIC);
-		reg_val |= BIT(INT_WAVE5_BSBUF_FULL);
-		/* Decoder interrupt */
-		reg_val |= BIT(INT_WAVE5_INIT_SEQ);
-		reg_val |= BIT(INT_WAVE5_DEC_PIC);
-		reg_val |= BIT(INT_WAVE5_BSBUF_EMPTY);
-		vpu_write_reg(vpu_dev, W5_VPU_VINT_ENABLE, reg_val);
-
 		reg_val = vpu_read_reg(vpu_dev, W5_VPU_RET_VPU_CONFIG0);
 		if (FIELD_GET(FEATURE_BACKBONE, reg_val)) {
 			reg_val = ((WAVE5_PROC_AXI_ID << 28) |
@@ -1134,15 +1137,7 @@  static int wave5_vpu_sleep_wake(struct device *dev, bool i_sleep_wake, const uin
 		wave5_fio_writel(vpu_dev, W5_BACKBONE_AXI_PARAM, 0);
 		vpu_write_reg(vpu_dev, W5_SEC_AXI_PARAM, 0);
 
-		/* Encoder interrupt */
-		reg_val = BIT(INT_WAVE5_ENC_SET_PARAM);
-		reg_val |= BIT(INT_WAVE5_ENC_PIC);
-		reg_val |= BIT(INT_WAVE5_BSBUF_FULL);
-		/* Decoder interrupt */
-		reg_val |= BIT(INT_WAVE5_INIT_SEQ);
-		reg_val |= BIT(INT_WAVE5_DEC_PIC);
-		reg_val |= BIT(INT_WAVE5_BSBUF_EMPTY);
-		vpu_write_reg(vpu_dev, W5_VPU_VINT_ENABLE, reg_val);
+		setup_wave5_interrupts(vpu_dev);
 
 		reg_val = vpu_read_reg(vpu_dev, W5_VPU_RET_VPU_CONFIG0);
 		if (FIELD_GET(FEATURE_BACKBONE, reg_val)) {