| Message ID | 20240324220854.15010-15-laurent.pinchart@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: Add driver for the Raspberry Pi <5 CSI-2 receiver | expand |
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts index d5f8823230db..cfc8cb5e10ba 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -15,6 +15,13 @@ chosen { stdout-path = "serial1:115200n8"; }; + cam1_reg: regulator-cam1 { + compatible = "regulator-fixed"; + regulator-name = "cam1-reg"; + enable-active-high; + gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; + }; + sd_io_1v8_reg: regulator-sd-io-1v8 { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io";
Add a fixed regulator to model the power supply to the camera connector. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 7 +++++++ 1 file changed, 7 insertions(+)