diff mbox series

[v7,6/6] media: imx335: Limit analogue gain value

Message ID 20240414140621.167717-7-umang.jain@ideasonboard.com (mailing list archive)
State Accepted
Headers show
Series media: imx335: 2/4 lane ops and improvements | expand

Commit Message

Umang Jain April 14, 2024, 2:06 p.m. UTC 
The sensor gain (both analog and digital) are controlled by a
single gain value where:
- 0dB to 30dB correspond to analog gain
- 30.3dB to 72dB correspond to digital gain
  (with 0.3dB step)

Hence, limit the analogue gain value to 100.
For digital gain, support can be added later if needed.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
---
 drivers/media/i2c/imx335.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 31d3b95cc0ef..0b06e86583f2 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -49,10 +49,10 @@ 
 #define IMX335_REG_AREA3_ST_ADR_1	CCI_REG16_LE(0x3074)
 #define IMX335_REG_AREA3_WIDTH_1	CCI_REG16_LE(0x3076)
 
-/* Analog gain control */
-#define IMX335_REG_AGAIN		CCI_REG8(0x30e8)
+/* Analog and Digital gain control */
+#define IMX335_REG_GAIN			CCI_REG8(0x30e8)
 #define IMX335_AGAIN_MIN		0
-#define IMX335_AGAIN_MAX		240
+#define IMX335_AGAIN_MAX		100
 #define IMX335_AGAIN_STEP		1
 #define IMX335_AGAIN_DEFAULT		0
 
@@ -479,7 +479,7 @@  static int imx335_update_exp_gain(struct imx335 *imx335, u32 exposure, u32 gain)
 	cci_write(imx335->cci, IMX335_REG_HOLD, 1, &ret);
 	cci_write(imx335->cci, IMX335_REG_VMAX, lpfr, &ret);
 	cci_write(imx335->cci, IMX335_REG_SHUTTER, shutter, &ret);
-	cci_write(imx335->cci, IMX335_REG_AGAIN, gain, &ret);
+	cci_write(imx335->cci, IMX335_REG_GAIN, gain, &ret);
 	/*
 	 * Unconditionally attempt to release the hold, but track the
 	 * error if the unhold itself fails.
@@ -1183,6 +1183,14 @@  static int imx335_init_controls(struct imx335 *imx335)
 					     IMX335_EXPOSURE_STEP,
 					     IMX335_EXPOSURE_DEFAULT);
 
+	/*
+	 * The sensor has an analog gain and a digital gain, both controlled
+	 * through a single gain value, expressed in 0.3dB increments. Values
+	 * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher values
+	 * up to 72.0dB (240) add further digital gain. Limit the range to
+	 * analog gain only, support for digital gain can be added separately
+	 * if needed.
+	 */
 	imx335->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
 					       &imx335_ctrl_ops,
 					       V4L2_CID_ANALOGUE_GAIN,