@@ -614,26 +614,6 @@ enum atomisp_camera_port {
ATOMISP_CAMERA_NR_PORTS
};
-/* Flash modes. Default is off.
- * Setting a flash to TORCH or INDICATOR mode will automatically
- * turn it on. Setting it to FLASH mode will not turn on the flash
- * until the FLASH_STROBE command is sent. */
-enum atomisp_flash_mode {
- ATOMISP_FLASH_MODE_OFF,
- ATOMISP_FLASH_MODE_FLASH,
- ATOMISP_FLASH_MODE_TORCH,
- ATOMISP_FLASH_MODE_INDICATOR,
-};
-
-/* Flash statuses, used by atomisp driver to check before starting
- * flash and after having started flash. */
-enum atomisp_flash_status {
- ATOMISP_FLASH_STATUS_OK,
- ATOMISP_FLASH_STATUS_HW_ERROR,
- ATOMISP_FLASH_STATUS_INTERRUPTED,
- ATOMISP_FLASH_STATUS_TIMEOUT,
-};
-
/* Frame status. This is used to detect corrupted frames and flash
* exposed frames. Usually, the first 2 frames coming out of the sensor
* are corrupted. When using flash, the frame before and the frame after
@@ -661,7 +641,6 @@ enum atomisp_ext_isp_id {
EXT_ISP_CID_AF_STATUS,
EXT_ISP_CID_GET_AF_MODE,
EXT_ISP_CID_CAPTURE_BURST,
- EXT_ISP_CID_FLASH_MODE,
EXT_ISP_CID_ZOOM,
EXT_ISP_CID_SHOT_MODE
};
@@ -694,12 +673,6 @@ enum atomisp_burst_capture_options {
EXT_ISP_BURST_CAPTURE_CTRL_STOP
};
-#define EXT_ISP_FLASH_MODE_OFF 0
-#define EXT_ISP_FLASH_MODE_ON 1
-#define EXT_ISP_FLASH_MODE_AUTO 2
-#define EXT_ISP_LED_TORCH_OFF 3
-#define EXT_ISP_LED_TORCH_ON 4
-
#define EXT_ISP_SHOT_MODE_AUTO 0
#define EXT_ISP_SHOT_MODE_BEAUTY_FACE 1
#define EXT_ISP_SHOT_MODE_BEST_PHOTO 2
@@ -894,18 +867,6 @@ enum atomisp_burst_capture_options {
* Exposure, Flash and privacy (indicator) light controls, to be upstreamed */
#define V4L2_CID_CAMERA_LASTP1 (V4L2_CID_CAMERA_CLASS_BASE + 1024)
-/* Flash related CIDs, see also:
- * http://linuxtv.org/downloads/v4l-dvb-apis/extended-controls.html\
- * #flash-controls */
-
-/* Request a number of flash-exposed frames. The frame status can be
- * found in the reserved field in the v4l2_buffer struct. */
-#define V4L2_CID_REQUEST_FLASH (V4L2_CID_CAMERA_LASTP1 + 3)
-/* Query flash driver status. See enum atomisp_flash_status above. */
-#define V4L2_CID_FLASH_STATUS (V4L2_CID_CAMERA_LASTP1 + 5)
-/* Set the flash mode (see enum atomisp_flash_mode) */
-#define V4L2_CID_FLASH_MODE (V4L2_CID_CAMERA_LASTP1 + 10)
-
#define V4L2_CID_RUN_MODE (V4L2_CID_CAMERA_LASTP1 + 20)
#define ATOMISP_RUN_MODE_VIDEO 1
#define ATOMISP_RUN_MODE_STILL_CAPTURE 2
@@ -925,9 +886,6 @@ enum atomisp_burst_capture_options {
#define ATOMISP_VFPP_DISABLE_SCALER 1
#define ATOMISP_VFPP_DISABLE_LOWLAT 2
-/* Query real flash status register value */
-#define V4L2_CID_FLASH_STATUS_REGISTER (V4L2_CID_CAMERA_LASTP1 + 26)
-
#define V4L2_CID_START_ZSL_CAPTURE (V4L2_CID_CAMERA_LASTP1 + 28)
/* Lock and unlock raw buffer */
#define V4L2_CID_ENABLE_RAW_BUFFER_LOCK (V4L2_CID_CAMERA_LASTP1 + 29)
@@ -111,7 +111,6 @@ enum atomisp_input_format {
enum intel_v4l2_subdev_type {
RAW_CAMERA = 1,
- LED_FLASH = 2,
};
struct intel_v4l2_subdev_id {
@@ -61,14 +61,6 @@
#include "ia_css_debug.h"
#include "bits.h"
-/* We should never need to run the flash for more than 2 frames.
- * At 15fps this means 133ms. We set the timeout a bit longer.
- * Each flash driver is supposed to set its own timeout, but
- * just in case someone else changed the timeout, we set it
- * here to make sure we don't damage the flash hardware.
- */
-#define FLASH_TIMEOUT 800 /* ms */
-
union host {
struct {
void *kernel_ptr;
@@ -677,7 +669,6 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
struct atomisp_metadata_buf *md_buf = NULL, *_md_buf_tmp, *md_iter;
enum atomisp_metadata_type md_type;
struct atomisp_device *isp = asd->isp;
- struct v4l2_control ctrl;
int i, err;
lockdep_assert_held(&isp->mutex);
@@ -792,19 +783,6 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
dev_dbg(isp->dev, "%s: vf frame with exp_id %d is ready\n",
__func__, frame->exp_id);
- if (asd->params.flash_state == ATOMISP_FLASH_ONGOING) {
- if (frame->flash_state
- == IA_CSS_FRAME_FLASH_STATE_PARTIAL)
- dev_dbg(isp->dev, "%s thumb partially flashed\n",
- __func__);
- else if (frame->flash_state
- == IA_CSS_FRAME_FLASH_STATE_FULL)
- dev_dbg(isp->dev, "%s thumb completely flashed\n",
- __func__);
- else
- dev_dbg(isp->dev, "%s thumb no flash in this frame\n",
- __func__);
- }
pipe->frame_config_id[frame->vb.vb2_buf.index] = frame->isp_config_id;
break;
case IA_CSS_BUFFER_TYPE_OUTPUT_FRAME:
@@ -835,40 +813,7 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
}
pipe->frame_config_id[i] = frame->isp_config_id;
- ctrl.id = V4L2_CID_FLASH_MODE;
- if (asd->params.flash_state == ATOMISP_FLASH_ONGOING) {
- if (frame->flash_state == IA_CSS_FRAME_FLASH_STATE_PARTIAL) {
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_FLASH_PARTIAL;
- dev_dbg(isp->dev, "%s partially flashed\n", __func__);
- } else if (frame->flash_state == IA_CSS_FRAME_FLASH_STATE_FULL) {
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_FLASH_EXPOSED;
- asd->params.num_flash_frames--;
- dev_dbg(isp->dev, "%s completely flashed\n", __func__);
- } else {
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_OK;
- dev_dbg(isp->dev, "%s no flash in this frame\n", __func__);
- }
-
- /* Check if flashing sequence is done */
- if (asd->frame_status[i] == ATOMISP_FRAME_STATUS_FLASH_EXPOSED)
- asd->params.flash_state = ATOMISP_FLASH_DONE;
- } else if (isp->flash) {
- if (v4l2_g_ctrl(isp->flash->ctrl_handler, &ctrl) == 0 &&
- ctrl.value == ATOMISP_FLASH_MODE_TORCH) {
- ctrl.id = V4L2_CID_FLASH_TORCH_INTENSITY;
- if (v4l2_g_ctrl(isp->flash->ctrl_handler, &ctrl) == 0 &&
- ctrl.value > 0)
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_FLASH_EXPOSED;
- else
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_OK;
- } else {
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_OK;
- }
- } else {
- asd->frame_status[i] = ATOMISP_FRAME_STATUS_OK;
- }
-
- asd->params.last_frame_status = asd->frame_status[i];
+ asd->frame_status[i] = ATOMISP_FRAME_STATUS_OK;
if (asd->params.css_update_params_needed) {
atomisp_apply_css_parameters(asd,
@@ -1011,36 +956,6 @@ void atomisp_assert_recovery_work(struct work_struct *work)
mutex_unlock(&isp->mutex);
}
-void atomisp_setup_flash(struct atomisp_sub_device *asd)
-{
- struct atomisp_device *isp = asd->isp;
- struct v4l2_control ctrl;
-
- if (!isp->flash)
- return;
-
- if (asd->params.flash_state != ATOMISP_FLASH_REQUESTED &&
- asd->params.flash_state != ATOMISP_FLASH_DONE)
- return;
-
- if (asd->params.num_flash_frames) {
- /* make sure the timeout is set before setting flash mode */
- ctrl.id = V4L2_CID_FLASH_TIMEOUT;
- ctrl.value = FLASH_TIMEOUT;
-
- if (v4l2_s_ctrl(NULL, isp->flash->ctrl_handler, &ctrl)) {
- dev_err(isp->dev, "flash timeout configure failed\n");
- return;
- }
-
- ia_css_stream_request_flash(asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].stream);
-
- asd->params.flash_state = ATOMISP_FLASH_ONGOING;
- } else {
- asd->params.flash_state = ATOMISP_FLASH_IDLE;
- }
-}
-
irqreturn_t atomisp_isr_thread(int irq, void *isp_ptr)
{
struct atomisp_device *isp = isp_ptr;
@@ -1083,14 +998,8 @@ irqreturn_t atomisp_isr_thread(int irq, void *isp_ptr)
* time, instead, dequue one and process one, then another
*/
mutex_lock(&isp->mutex);
- if (atomisp_css_isr_thread(isp))
- goto out;
-
- if (isp->asd.streaming)
- atomisp_setup_flash(&isp->asd);
-out:
+ atomisp_css_isr_thread(isp);
mutex_unlock(&isp->mutex);
- dev_dbg(isp->dev, "<%s\n", __func__);
return IRQ_HANDLED;
}
@@ -4580,28 +4489,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
return ret;
}
-int atomisp_flash_enable(struct atomisp_sub_device *asd, int num_frames)
-{
- struct atomisp_device *isp = asd->isp;
-
- if (num_frames < 0) {
- dev_dbg(isp->dev, "%s ERROR: num_frames: %d\n", __func__,
- num_frames);
- return -EINVAL;
- }
- /* a requested flash is still in progress. */
- if (num_frames && asd->params.flash_state != ATOMISP_FLASH_IDLE) {
- dev_dbg(isp->dev, "%s flash busy: %d frames left: %d\n",
- __func__, asd->params.flash_state,
- asd->params.num_flash_frames);
- return -EBUSY;
- }
-
- asd->params.num_flash_frames = num_frames;
- asd->params.flash_state = ATOMISP_FLASH_REQUESTED;
- return 0;
-}
-
static int __checking_exp_id(struct atomisp_sub_device *asd, int exp_id)
{
struct atomisp_device *isp = asd->isp;
@@ -58,7 +58,6 @@ void atomisp_clear_css_buffer_counters(struct atomisp_sub_device *asd);
void atomisp_msi_irq_init(struct atomisp_device *isp);
void atomisp_msi_irq_uninit(struct atomisp_device *isp);
void atomisp_assert_recovery_work(struct work_struct *work);
-void atomisp_setup_flash(struct atomisp_sub_device *asd);
irqreturn_t atomisp_isr(int irq, void *dev);
irqreturn_t atomisp_isr_thread(int irq, void *isp_ptr);
const struct atomisp_format_bridge *get_atomisp_format_bridge_from_mbus(
@@ -262,9 +261,6 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd,
void atomisp_free_internal_buffers(struct atomisp_sub_device *asd);
-int atomisp_flash_enable(struct atomisp_sub_device *asd,
- int num_frames);
-
int atomisp_freq_scaling(struct atomisp_device *vdev,
enum atomisp_dfs_mode mode,
bool force);
@@ -520,21 +520,12 @@ static int atomisp_open(struct file *file)
}
atomisp_dev_init_struct(isp);
-
- ret = v4l2_subdev_call(isp->flash, core, s_power, 1);
- if (ret < 0 && ret != -ENODEV && ret != -ENOIOCTLCMD) {
- dev_err(isp->dev, "Failed to power-on flash\n");
- goto css_error;
- }
-
atomisp_subdev_init_struct(asd);
pipe->users++;
mutex_unlock(&isp->mutex);
return 0;
-css_error:
- pm_runtime_put(vdev->v4l2_dev->dev);
error:
mutex_unlock(&isp->mutex);
v4l2_fh_release(file);
@@ -549,7 +540,6 @@ static int atomisp_release(struct file *file)
struct atomisp_sub_device *asd = pipe->asd;
struct v4l2_subdev_fh fh;
struct v4l2_rect clear_compose = {0};
- int ret;
v4l2_fh_init(&fh.vfh, vdev);
@@ -584,10 +574,6 @@ static int atomisp_release(struct file *file)
atomisp_destroy_pipes_stream(asd);
- ret = v4l2_subdev_call(isp->flash, core, s_power, 0);
- if (ret < 0 && ret != -ENODEV && ret != -ENOIOCTLCMD)
- dev_warn(isp->dev, "Failed to power-off flash\n");
-
if (pm_runtime_put_sync(vdev->v4l2_dev->dev) < 0)
dev_err(isp->dev, "Failed to power off device\n");
@@ -200,7 +200,6 @@ struct atomisp_device {
struct v4l2_subdev *sensor_subdevs[ATOMISP_CAMERA_NR_PORTS];
unsigned int input_cnt;
struct atomisp_input_subdev inputs[ATOM_ISP_MAX_INPUTS];
- struct v4l2_subdev *flash;
struct atomisp_regs saved_regs;
struct atomisp_css_env css_env;
@@ -136,15 +136,6 @@ static struct v4l2_queryctrl ci_v4l2_controls[] = {
.step = 1,
.default_value = 0,
},
- {
- .id = V4L2_CID_REQUEST_FLASH,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Request flash frames",
- .minimum = 0,
- .maximum = 10,
- .step = 1,
- .default_value = 1,
- },
{
.id = V4L2_CID_ATOMISP_LOW_LIGHT,
.type = V4L2_CTRL_TYPE_BOOLEAN,
@@ -956,12 +947,6 @@ int atomisp_start_streaming(struct vb2_queue *vq, unsigned int count)
atomisp_qbuffers_to_css(asd);
- if (isp->flash) {
- asd->params.num_flash_frames = 0;
- asd->params.flash_state = ATOMISP_FLASH_IDLE;
- atomisp_setup_flash(asd);
- }
-
atomisp_css_irq_enable(isp, IA_CSS_IRQ_INFO_CSS_RECEIVER_SOF,
atomisp_css_valid_sof(isp));
atomisp_csi2_configure(asd);
@@ -1039,11 +1024,6 @@ void atomisp_stop_streaming(struct vb2_queue *vq)
if (ret)
dev_warn(isp->dev, "Stopping sensor stream failed: %d\n", ret);
- if (isp->flash) {
- asd->params.num_flash_frames = 0;
- asd->params.flash_state = ATOMISP_FLASH_IDLE;
- }
-
/* Disable the CSI interface on ANN B0/K0 */
if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 <<
ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) {
@@ -1165,9 +1145,6 @@ static int atomisp_s_ctrl(struct file *file, void *fh,
case V4L2_CID_ATOMISP_FALSE_COLOR_CORRECTION:
ret = atomisp_false_color(asd, 1, &control->value);
break;
- case V4L2_CID_REQUEST_FLASH:
- ret = atomisp_flash_enable(asd, control->value);
- break;
case V4L2_CID_ATOMISP_LOW_LIGHT:
ret = atomisp_low_light(asd, 1, &control->value);
break;
@@ -1212,7 +1189,6 @@ static int atomisp_camera_g_ext_ctrls(struct file *file, void *fh,
{
struct video_device *vdev = video_devdata(file);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
- struct atomisp_device *isp = video_get_drvdata(vdev);
struct v4l2_control ctrl;
int i;
int ret = 0;
@@ -1221,19 +1197,6 @@ static int atomisp_camera_g_ext_ctrls(struct file *file, void *fh,
ctrl.id = c->controls[i].id;
ctrl.value = c->controls[i].value;
switch (ctrl.id) {
- case V4L2_CID_FLASH_STATUS:
- case V4L2_CID_FLASH_INTENSITY:
- case V4L2_CID_FLASH_TORCH_INTENSITY:
- case V4L2_CID_FLASH_INDICATOR_INTENSITY:
- case V4L2_CID_FLASH_TIMEOUT:
- case V4L2_CID_FLASH_STROBE:
- case V4L2_CID_FLASH_MODE:
- case V4L2_CID_FLASH_STATUS_REGISTER:
- if (isp->flash)
- ret =
- v4l2_g_ctrl(isp->flash->ctrl_handler,
- &ctrl);
- break;
case V4L2_CID_ZOOM_ABSOLUTE:
ret = atomisp_digital_zoom(asd, 0, &ctrl.value);
break;
@@ -1283,7 +1246,6 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh,
{
struct video_device *vdev = video_devdata(file);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
- struct atomisp_device *isp = video_get_drvdata(vdev);
struct v4l2_control ctrl;
int i;
int ret = 0;
@@ -1294,29 +1256,6 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh,
ctrl.id = c->controls[i].id;
ctrl.value = c->controls[i].value;
switch (ctrl.id) {
- case V4L2_CID_FLASH_STATUS:
- case V4L2_CID_FLASH_INTENSITY:
- case V4L2_CID_FLASH_TORCH_INTENSITY:
- case V4L2_CID_FLASH_INDICATOR_INTENSITY:
- case V4L2_CID_FLASH_TIMEOUT:
- case V4L2_CID_FLASH_STROBE:
- case V4L2_CID_FLASH_MODE:
- case V4L2_CID_FLASH_STATUS_REGISTER:
- if (isp->flash) {
- ret =
- v4l2_s_ctrl(NULL, isp->flash->ctrl_handler,
- &ctrl);
- /*
- * When flash mode is changed we need to reset
- * flash state
- */
- if (ctrl.id == V4L2_CID_FLASH_MODE) {
- asd->params.flash_state =
- ATOMISP_FLASH_IDLE;
- asd->params.num_flash_frames = 0;
- }
- }
- break;
case V4L2_CID_ZOOM_ABSOLUTE:
ret = atomisp_digital_zoom(asd, 1, &ctrl.value);
break;
@@ -108,14 +108,6 @@ struct atomisp_pad_format {
struct v4l2_rect compose;
};
-/* Internal states for flash process */
-enum atomisp_flash_state {
- ATOMISP_FLASH_IDLE,
- ATOMISP_FLASH_REQUESTED,
- ATOMISP_FLASH_ONGOING,
- ATOMISP_FLASH_DONE
-};
-
/*
* This structure is used to cache the CSS parameters, it aligns to
* struct ia_css_isp_config but without un-supported and deprecated parts.
@@ -221,11 +213,6 @@ struct atomisp_subdev_params {
int dvs_ver_proj_bytes;
int dvs_hor_proj_bytes;
- /* Flash */
- int num_flash_frames;
- enum atomisp_flash_state flash_state;
- enum atomisp_frame_status last_frame_status;
-
/* Flag to check if driver needs to update params to css */
bool css_update_params_needed;
};
@@ -825,13 +825,6 @@ static int atomisp_subdev_probe(struct atomisp_device *isp)
isp->sensor_lanes[mipi_port] = subdevs->lanes;
isp->sensor_subdevs[subdevs->port] = subdevs->subdev;
break;
- case LED_FLASH:
- if (isp->flash) {
- dev_warn(isp->dev, "too many atomisp flash devices\n");
- continue;
- }
- isp->flash = subdevs->subdev;
- break;
default:
dev_dbg(isp->dev, "unknown subdev probed\n");
break;
@@ -137,12 +137,6 @@ enum ia_css_frame_delay {
IA_CSS_FRAME_DELAY_2 /** Frame delay = 2 */
};
-enum ia_css_frame_flash_state {
- IA_CSS_FRAME_FLASH_STATE_NONE,
- IA_CSS_FRAME_FLASH_STATE_PARTIAL,
- IA_CSS_FRAME_FLASH_STATE_FULL
-};
-
/* Frame structure. This structure describes an image buffer or frame.
* This is the main structure used for all input and output images.
*/
@@ -176,7 +170,6 @@ struct ia_css_frame {
* binary, we use output port, but we expect VF_OUTPUT_DONE event
*/
enum ia_css_buffer_type buf_type;
- enum ia_css_frame_flash_state flash_state;
unsigned int exp_id;
/** exposure id, see ia_css_event_public.h for more detail */
u32 isp_config_id; /** Unique ID to track which config was actually applied to a particular frame */
@@ -202,7 +195,6 @@ struct ia_css_frame {
.frame_info = IA_CSS_BINARY_DEFAULT_FRAME_INFO, \
.dynamic_queue_id = SH_CSS_INVALID_QUEUE_ID, \
.buf_type = IA_CSS_BUFFER_TYPE_INVALID, \
- .flash_state = IA_CSS_FRAME_FLASH_STATE_NONE, \
}
/* @brief Allocate a CSS frame structure
@@ -457,20 +457,6 @@ ia_css_stream_send_input_embedded_line(const struct ia_css_stream *stream,
void
ia_css_stream_end_input_frame(const struct ia_css_stream *stream);
-/* @brief send a request flash command to SP
- *
- * @param[in] stream The stream.
- * @return None
- *
- * Driver needs to call this function to send a flash request command
- * to SP, SP will be responsible for switching on/off the flash at proper
- * time. Due to the SP multi-threading environment, this request may have
- * one-frame delay, the driver needs to check the flashed flag in frame info
- * to determine which frame is being flashed.
- */
-void
-ia_css_stream_request_flash(struct ia_css_stream *stream);
-
/* @brief Configure a stream with filter coefficients.
* @deprecated {Replaced by
* ia_css_pipe_set_isp_config_on_pipe()}
@@ -2834,7 +2834,6 @@ init_vf_frameinfo_defaults(struct ia_css_pipe *pipe,
assert(vf_frame);
sh_css_pipe_get_viewfinder_frame_info(pipe, &vf_frame->frame_info, idx);
- vf_frame->flash_state = IA_CSS_FRAME_FLASH_STATE_NONE;
ia_css_pipeline_get_sp_thread_id(ia_css_pipe_get_pipe_num(pipe), &thread_id);
ia_css_query_internal_queue_id(IA_CSS_BUFFER_TYPE_VF_OUTPUT_FRAME + idx, thread_id, &queue_id);
vf_frame->dynamic_queue_id = queue_id;
@@ -3012,7 +3011,6 @@ init_in_frameinfo_memory_defaults(struct ia_css_pipe *pipe,
in_frame->frame_info.raw_bit_depth = ia_css_pipe_util_pipe_input_format_bpp(pipe);
ia_css_frame_info_set_width(&in_frame->frame_info,
pipe->stream->config.input_config.input_res.width, 0);
- in_frame->flash_state = IA_CSS_FRAME_FLASH_STATE_NONE;
ia_css_pipeline_get_sp_thread_id(ia_css_pipe_get_pipe_num(pipe), &thread_id);
ia_css_query_internal_queue_id(IA_CSS_BUFFER_TYPE_INPUT_FRAME, thread_id, &queue_id);
in_frame->dynamic_queue_id = queue_id;
@@ -3040,7 +3038,6 @@ init_out_frameinfo_defaults(struct ia_css_pipe *pipe,
assert(out_frame);
sh_css_pipe_get_output_frame_info(pipe, &out_frame->frame_info, idx);
- out_frame->flash_state = IA_CSS_FRAME_FLASH_STATE_NONE;
ia_css_pipeline_get_sp_thread_id(ia_css_pipe_get_pipe_num(pipe), &thread_id);
ia_css_query_internal_queue_id(IA_CSS_BUFFER_TYPE_OUTPUT_FRAME + idx, thread_id, &queue_id);
out_frame->dynamic_queue_id = queue_id;
@@ -3821,12 +3818,6 @@ ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
buffer->exp_id = ddr_buffer.payload.frame.exp_id;
frame->exp_id = ddr_buffer.payload.frame.exp_id;
frame->isp_config_id = ddr_buffer.payload.frame.isp_parameters_id;
- if (ddr_buffer.payload.frame.flashed == 1)
- frame->flash_state =
- IA_CSS_FRAME_FLASH_STATE_PARTIAL;
- if (ddr_buffer.payload.frame.flashed == 2)
- frame->flash_state =
- IA_CSS_FRAME_FLASH_STATE_FULL;
frame->valid = pipe->num_invalid_frames == 0;
if (!frame->valid)
pipe->num_invalid_frames--;
@@ -6788,8 +6779,6 @@ create_host_copy_pipeline(struct ia_css_pipe *pipe,
ia_css_pipeline_clean(me);
/* Construct out_frame info */
- out_frame->flash_state = IA_CSS_FRAME_FLASH_STATE_NONE;
-
if (copy_on_sp(pipe) &&
pipe->stream->config.input_config.format == ATOMISP_INPUT_FORMAT_BINARY_8) {
ia_css_frame_info_init(&out_frame->frame_info, JPEG_BYTES, 1,
@@ -6837,7 +6826,6 @@ create_host_isyscopy_capture_pipeline(struct ia_css_pipe *pipe)
err = sh_css_pipe_get_output_frame_info(pipe, &out_frame->frame_info, 0);
if (err)
return err;
- out_frame->flash_state = IA_CSS_FRAME_FLASH_STATE_NONE;
ia_css_pipeline_get_sp_thread_id(ia_css_pipe_get_pipe_num(pipe), &thread_id);
ia_css_query_internal_queue_id(IA_CSS_BUFFER_TYPE_OUTPUT_FRAME, thread_id, &queue_id);
out_frame->dynamic_queue_id = queue_id;
@@ -7492,27 +7480,6 @@ int ia_css_stream_capture(struct ia_css_stream *stream, int num_captures,
return return_err;
}
-void ia_css_stream_request_flash(struct ia_css_stream *stream)
-{
- (void)stream;
-
- assert(stream);
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
- "ia_css_stream_request_flash() enter: void\n");
-
- if (!IS_ISP2401 || sh_css_sp_is_running()) {
- if (!sh_css_write_host2sp_command(host2sp_cmd_start_flash) && IS_ISP2401) {
- IA_CSS_ERROR("Call to 'sh-css_write_host2sp_command()' failed");
- ia_css_debug_dump_sp_sw_debug_info();
- }
- } else {
- IA_CSS_LOG("SP is not running!");
- }
-
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
- "ia_css_stream_request_flash() leave: return_void\n");
-}
-
static void
sh_css_init_host_sp_control_vars(void)
{
Remove the custom flash handling from the atomisp driver. There are only very few Bay Trail / Cherry Trail devices with flash and if those will ever get supported then this should be done through the new standard include/linux/led-class-flash.h APIs instead of with atomisp specific custom APIs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../media/atomisp/include/linux/atomisp.h | 42 ------- .../atomisp/include/linux/atomisp_platform.h | 1 - .../staging/media/atomisp/pci/atomisp_cmd.c | 117 +----------------- .../staging/media/atomisp/pci/atomisp_cmd.h | 4 - .../staging/media/atomisp/pci/atomisp_fops.c | 14 --- .../media/atomisp/pci/atomisp_internal.h | 1 - .../staging/media/atomisp/pci/atomisp_ioctl.c | 61 --------- .../media/atomisp/pci/atomisp_subdev.h | 13 -- .../staging/media/atomisp/pci/atomisp_v4l2.c | 7 -- .../media/atomisp/pci/ia_css_frame_public.h | 8 -- .../media/atomisp/pci/ia_css_stream_public.h | 14 --- drivers/staging/media/atomisp/pci/sh_css.c | 33 ----- 12 files changed, 2 insertions(+), 313 deletions(-)