From patchwork Mon Apr 29 06:18:46 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sakari Ailus X-Patchwork-Id: 13646320 Received: from mgamail.intel.com (mgamail.intel.com [198.175.65.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9D8391118C for ; Mon, 29 Apr 2024 06:19:24 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.175.65.20 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714371567; cv=none; b=cM30MMDIFMBeq/zB5nYz1vd1DxKGvWGnkENEkHDbHkSIil7YJVQ2QD0Ih88BFG3tsbytJyoYgEQ7APJ28Br6G4HrB/cepsFeKHlFGXcqy6gziAvsZw+eUvOYBvOWSC1Hd8e6yYPVeLobuUwSVN9lIXWKcM31l97yz0GuA49sF/0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1714371567; c=relaxed/simple; bh=P0jaw9u+pWEvH584tGeNZwmZagoDOaMWPBSSD7vVpBU=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=OsDlvISE/JasslGQSAzLg3L2l1CPliOWwP61aqz92jOTB4U6qKMozm21xg4o9FcgybxoYP4PzzmBPEvt1SONaTtulzo9oDlH8wKPfMmq2LMFkdVb+mhzO0Gqnp4Q7rCLuJhscNVH4w0s989wSWLA7H2IomvKN3peAO20OoIpaNM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.intel.com; spf=none smtp.mailfrom=linux.intel.com; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b=HJ4F02Vj; arc=none smtp.client-ip=198.175.65.20 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.intel.com Authentication-Results: smtp.subspace.kernel.org; spf=none smtp.mailfrom=linux.intel.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="HJ4F02Vj" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1714371565; x=1745907565; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=P0jaw9u+pWEvH584tGeNZwmZagoDOaMWPBSSD7vVpBU=; b=HJ4F02VjleO0Y6l/MoVqVM3J2+tOyh8umZ4Q1JN3JI+K6PohSrOVhm6+ YEIsW7tR1FLbjpj5d9fbcV9yUFOtkmxMJLYq1yb8qZVTuBZavDIQLr4cg rSs1cjK+RmMKdupqMLO3dLsn+EOG21KLHdqW+5eufer1UKiD+2WOlj3mE P4HWHdG4J61mgIJD79HHXqzvX+omUt2Y6C8TA4Yzi1+cZb47Y4iuxAbWM LlushthL23KLppTYwRQ2768lG5Lo+VfBMVHvEFgoxScFiL6kziWG2D5sA B/aE0CxHnwNWGccSdi7KIPad95VntIgsOkS7Rw8lDfjZViDcoKHDmn2pi w==; X-CSE-ConnectionGUID: gfJteMW6Tcqqi56u7piXJA== X-CSE-MsgGUID: 0DaSgv1nQM+TXznD+SEh8Q== X-IronPort-AV: E=McAfee;i="6600,9927,11057"; a="9851191" X-IronPort-AV: E=Sophos;i="6.07,238,1708416000"; d="scan'208";a="9851191" Received: from orviesa005.jf.intel.com ([10.64.159.145]) by orvoesa112.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 28 Apr 2024 23:19:25 -0700 X-CSE-ConnectionGUID: t5tsMDDYS/G/7N0cRtMvxw== X-CSE-MsgGUID: uc3Ys7ELSXibWrbjp36ZwA== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="6.07,238,1708416000"; d="scan'208";a="30811539" Received: from turnipsi.fi.intel.com (HELO kekkonen.fi.intel.com) ([10.237.72.44]) by orviesa005-auth.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 28 Apr 2024 23:19:21 -0700 Received: from svinhufvud.ger.corp.intel.com (localhost [IPv6:::1]) by kekkonen.fi.intel.com (Postfix) with ESMTP id 766811205CF; Mon, 29 Apr 2024 09:19:16 +0300 (EEST) From: Sakari Ailus To: linux-media@vger.kernel.org Cc: bingbu.cao@intel.com, laurent.pinchart@ideasonboard.com, andriy.shevchenko@linux.intel.com, hdegoede@redhat.com, ilpo.jarvinen@linux.intel.com, claus.stovgaard@gmail.com, tomi.valkeinen@ideasonboard.com, tfiga@chromium.org, senozhatsky@chromium.org, andreaskleist@gmail.com, bingbu.cao@linux.intel.com, tian.shu.qiu@intel.com, hongju.wang@intel.com Subject: [PATCH v7 11/18] media: intel/ipu6: add the CSI2 DPHY implementation Date: Mon, 29 Apr 2024 09:18:46 +0300 Message-Id: <20240429061853.983538-12-sakari.ailus@linux.intel.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240429061853.983538-1-sakari.ailus@linux.intel.com> References: <20240429061853.983538-1-sakari.ailus@linux.intel.com> Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 From: Bingbu Cao IPU6 CSI-2 D-PHY hardware varies on different platforms, current IPU6 has three D-PHY hardware instances which are used on Tigerlake, Alder lake, Meteor lake and Jasper lake. MCD D-PHY is included in Tigerlake and Alder lake, DWC D-PHY is included in Meteor lake. Each PHY has its own register interface, the input system driver calls the appropriate D-PHY callbacks for the hardware set in isys_probe(). Signed-off-by: Bingbu Cao Signed-off-by: Sakari Ailus --- .../media/pci/intel/ipu6/ipu6-isys-dwc-phy.c | 536 +++++++++++++ .../media/pci/intel/ipu6/ipu6-isys-jsl-phy.c | 242 ++++++ .../media/pci/intel/ipu6/ipu6-isys-mcd-phy.c | 720 ++++++++++++++++++ 3 files changed, 1498 insertions(+) create mode 100644 drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c create mode 100644 drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c create mode 100644 drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c b/drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c new file mode 100644 index 000000000000..1715275e6776 --- /dev/null +++ b/drivers/media/pci/intel/ipu6/ipu6-isys-dwc-phy.c @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013--2024 Intel Corporation + */ + +#include +#include +#include +#include +#include +#include + +#include "ipu6-bus.h" +#include "ipu6-isys.h" +#include "ipu6-platform-isys-csi2-reg.h" + +#define IPU6_DWC_DPHY_BASE(i) (0x238038 + 0x34 * (i)) +#define IPU6_DWC_DPHY_RSTZ 0x00 +#define IPU6_DWC_DPHY_SHUTDOWNZ 0x04 +#define IPU6_DWC_DPHY_HSFREQRANGE 0x08 +#define IPU6_DWC_DPHY_CFGCLKFREQRANGE 0x0c +#define IPU6_DWC_DPHY_TEST_IFC_ACCESS_MODE 0x10 +#define IPU6_DWC_DPHY_TEST_IFC_REQ 0x14 +#define IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION 0x18 +#define IPU6_DWC_DPHY_DFT_CTRL0 0x28 +#define IPU6_DWC_DPHY_DFT_CTRL1 0x2c +#define IPU6_DWC_DPHY_DFT_CTRL2 0x30 + +/* + * test IFC request definition: + * - req: 0 for read, 1 for write + * - 12 bits address + * - 8bits data (will ignore for read) + * --24----16------4-----0 + * --|-data-|-addr-|-req-| + */ +#define IFC_REQ(req, addr, data) (FIELD_PREP(GENMASK(23, 16), data) | \ + FIELD_PREP(GENMASK(15, 4), addr) | \ + FIELD_PREP(GENMASK(1, 0), req)) + +#define TEST_IFC_REQ_READ 0 +#define TEST_IFC_REQ_WRITE 1 +#define TEST_IFC_REQ_RESET 2 + +#define TEST_IFC_ACCESS_MODE_FSM 0 +#define TEST_IFC_ACCESS_MODE_IFC_CTL 1 + +enum phy_fsm_state { + PHY_FSM_STATE_POWERON = 0, + PHY_FSM_STATE_BGPON = 1, + PHY_FSM_STATE_CAL_TYPE = 2, + PHY_FSM_STATE_BURNIN_CAL = 3, + PHY_FSM_STATE_TERMCAL = 4, + PHY_FSM_STATE_OFFSETCAL = 5, + PHY_FSM_STATE_OFFSET_LANE = 6, + PHY_FSM_STATE_IDLE = 7, + PHY_FSM_STATE_ULP = 8, + PHY_FSM_STATE_DDLTUNNING = 9, + PHY_FSM_STATE_SKEW_BACKWARD = 10, + PHY_FSM_STATE_INVALID, +}; + +static void dwc_dphy_write(struct ipu6_isys *isys, u32 phy_id, u32 addr, + u32 data) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id); + + dev_dbg(dev, "write: reg 0x%lx = data 0x%x", base + addr - isys_base, + data); + writel(data, base + addr); +} + +static u32 dwc_dphy_read(struct ipu6_isys *isys, u32 phy_id, u32 addr) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id); + u32 data; + + data = readl(base + addr); + dev_dbg(dev, "read: reg 0x%lx = data 0x%x", base + addr - isys_base, + data); + + return data; +} + +static void dwc_dphy_write_mask(struct ipu6_isys *isys, u32 phy_id, u32 addr, + u32 data, u8 shift, u8 width) +{ + u32 temp; + u32 mask; + + mask = (1 << width) - 1; + temp = dwc_dphy_read(isys, phy_id, addr); + temp &= ~(mask << shift); + temp |= (data & mask) << shift; + dwc_dphy_write(isys, phy_id, addr, temp); +} + +static u32 __maybe_unused dwc_dphy_read_mask(struct ipu6_isys *isys, u32 phy_id, + u32 addr, u8 shift, u8 width) +{ + u32 val; + + val = dwc_dphy_read(isys, phy_id, addr) >> shift; + return val & ((1 << width) - 1); +} + +#define DWC_DPHY_TIMEOUT (5 * USEC_PER_SEC) +static int dwc_dphy_ifc_read(struct ipu6_isys *isys, u32 phy_id, u32 addr, + u32 *val) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id); + void __iomem *reg; + u32 completion; + int ret; + + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_REQ, + IFC_REQ(TEST_IFC_REQ_READ, addr, 0)); + reg = base + IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION; + ret = readl_poll_timeout(reg, completion, !(completion & BIT(0)), + 10, DWC_DPHY_TIMEOUT); + if (ret) { + dev_err(dev, "DWC ifc request read timeout\n"); + return ret; + } + + *val = completion >> 8 & 0xff; + *val = FIELD_GET(GENMASK(15, 8), completion); + dev_dbg(dev, "DWC ifc read 0x%x = 0x%x", addr, *val); + + return 0; +} + +static int dwc_dphy_ifc_write(struct ipu6_isys *isys, u32 phy_id, u32 addr, + u32 data) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + void __iomem *base = isys_base + IPU6_DWC_DPHY_BASE(phy_id); + void __iomem *reg; + u32 completion; + int ret; + + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_REQ, + IFC_REQ(TEST_IFC_REQ_WRITE, addr, data)); + completion = readl(base + IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION); + reg = base + IPU6_DWC_DPHY_TEST_IFC_REQ_COMPLETION; + ret = readl_poll_timeout(reg, completion, !(completion & BIT(0)), + 10, DWC_DPHY_TIMEOUT); + if (ret) + dev_err(dev, "DWC ifc request write timeout\n"); + + return ret; +} + +static void dwc_dphy_ifc_write_mask(struct ipu6_isys *isys, u32 phy_id, + u32 addr, u32 data, u8 shift, u8 width) +{ + u32 temp, mask; + int ret; + + ret = dwc_dphy_ifc_read(isys, phy_id, addr, &temp); + if (ret) + return; + + mask = (1 << width) - 1; + temp &= ~(mask << shift); + temp |= (data & mask) << shift; + dwc_dphy_ifc_write(isys, phy_id, addr, temp); +} + +static u32 dwc_dphy_ifc_read_mask(struct ipu6_isys *isys, u32 phy_id, u32 addr, + u8 shift, u8 width) +{ + int ret; + u32 val; + + ret = dwc_dphy_ifc_read(isys, phy_id, addr, &val); + if (ret) + return 0; + + return ((val >> shift) & ((1 << width) - 1)); +} + +static int dwc_dphy_pwr_up(struct ipu6_isys *isys, u32 phy_id) +{ + struct device *dev = &isys->adev->auxdev.dev; + u32 fsm_state; + int ret; + + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_RSTZ, 1); + usleep_range(10, 20); + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_SHUTDOWNZ, 1); + + ret = read_poll_timeout(dwc_dphy_ifc_read_mask, fsm_state, + (fsm_state == PHY_FSM_STATE_IDLE || + fsm_state == PHY_FSM_STATE_ULP), + 100, DWC_DPHY_TIMEOUT, false, isys, + phy_id, 0x1e, 0, 4); + + if (ret) + dev_err(dev, "Dphy %d power up failed, state 0x%x", phy_id, + fsm_state); + + return ret; +} + +struct dwc_dphy_freq_range { + u8 hsfreq; + u16 min; + u16 max; + u16 default_mbps; + u16 osc_freq_target; +}; + +#define DPHY_FREQ_RANGE_NUM (63) +#define DPHY_FREQ_RANGE_INVALID_INDEX (0xff) +static const struct dwc_dphy_freq_range freqranges[DPHY_FREQ_RANGE_NUM] = { + {0x00, 80, 97, 80, 335}, + {0x10, 80, 107, 90, 335}, + {0x20, 84, 118, 100, 335}, + {0x30, 93, 128, 110, 335}, + {0x01, 103, 139, 120, 335}, + {0x11, 112, 149, 130, 335}, + {0x21, 122, 160, 140, 335}, + {0x31, 131, 170, 150, 335}, + {0x02, 141, 181, 160, 335}, + {0x12, 150, 191, 170, 335}, + {0x22, 160, 202, 180, 335}, + {0x32, 169, 212, 190, 335}, + {0x03, 183, 228, 205, 335}, + {0x13, 198, 244, 220, 335}, + {0x23, 212, 259, 235, 335}, + {0x33, 226, 275, 250, 335}, + {0x04, 250, 301, 275, 335}, + {0x14, 274, 328, 300, 335}, + {0x25, 297, 354, 325, 335}, + {0x35, 321, 380, 350, 335}, + {0x05, 369, 433, 400, 335}, + {0x16, 416, 485, 450, 335}, + {0x26, 464, 538, 500, 335}, + {0x37, 511, 590, 550, 335}, + {0x07, 559, 643, 600, 335}, + {0x18, 606, 695, 650, 335}, + {0x28, 654, 748, 700, 335}, + {0x39, 701, 800, 750, 335}, + {0x09, 749, 853, 800, 335}, + {0x19, 796, 905, 850, 335}, + {0x29, 844, 958, 900, 335}, + {0x3a, 891, 1010, 950, 335}, + {0x0a, 939, 1063, 1000, 335}, + {0x1a, 986, 1115, 1050, 335}, + {0x2a, 1034, 1168, 1100, 335}, + {0x3b, 1081, 1220, 1150, 335}, + {0x0b, 1129, 1273, 1200, 335}, + {0x1b, 1176, 1325, 1250, 335}, + {0x2b, 1224, 1378, 1300, 335}, + {0x3c, 1271, 1430, 1350, 335}, + {0x0c, 1319, 1483, 1400, 335}, + {0x1c, 1366, 1535, 1450, 335}, + {0x2c, 1414, 1588, 1500, 335}, + {0x3d, 1461, 1640, 1550, 208}, + {0x0d, 1509, 1693, 1600, 214}, + {0x1d, 1556, 1745, 1650, 221}, + {0x2e, 1604, 1798, 1700, 228}, + {0x3e, 1651, 1850, 1750, 234}, + {0x0e, 1699, 1903, 1800, 241}, + {0x1e, 1746, 1955, 1850, 248}, + {0x2f, 1794, 2008, 1900, 255}, + {0x3f, 1841, 2060, 1950, 261}, + {0x0f, 1889, 2113, 2000, 268}, + {0x40, 1936, 2165, 2050, 275}, + {0x41, 1984, 2218, 2100, 281}, + {0x42, 2031, 2270, 2150, 288}, + {0x43, 2079, 2323, 2200, 294}, + {0x44, 2126, 2375, 2250, 302}, + {0x45, 2174, 2428, 2300, 308}, + {0x46, 2221, 2480, 2350, 315}, + {0x47, 2269, 2500, 2400, 321}, + {0x48, 2316, 2500, 2450, 328}, + {0x49, 2364, 2500, 2500, 335} +}; + +static u16 get_hsfreq_by_mbps(u32 mbps) +{ + unsigned int i = DPHY_FREQ_RANGE_NUM; + + while (i--) { + if (freqranges[i].default_mbps == mbps || + (mbps >= freqranges[i].min && mbps <= freqranges[i].max)) + return i; + } + + return DPHY_FREQ_RANGE_INVALID_INDEX; +} + +static int ipu6_isys_dwc_phy_config(struct ipu6_isys *isys, + u32 phy_id, u32 mbps) +{ + struct ipu6_bus_device *adev = isys->adev; + struct device *dev = &adev->auxdev.dev; + struct ipu6_device *isp = adev->isp; + u32 cfg_clk_freqrange; + u32 osc_freq_target; + u32 index; + + dev_dbg(dev, "config Dphy %u with %u mbps", phy_id, mbps); + + index = get_hsfreq_by_mbps(mbps); + if (index == DPHY_FREQ_RANGE_INVALID_INDEX) { + dev_err(dev, "link freq not found for mbps %u", mbps); + return -EINVAL; + } + + dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_HSFREQRANGE, + freqranges[index].hsfreq, 0, 7); + + /* Force termination Calibration */ + if (isys->phy_termcal_val) { + dwc_dphy_ifc_write_mask(isys, phy_id, 0x20a, 0x1, 0, 1); + dwc_dphy_ifc_write_mask(isys, phy_id, 0x209, 0x3, 0, 2); + dwc_dphy_ifc_write_mask(isys, phy_id, 0x209, + isys->phy_termcal_val, 4, 4); + } + + /* + * Enable override to configure the DDL target oscillation + * frequency on bit 0 of register 0xe4 + */ + dwc_dphy_ifc_write_mask(isys, phy_id, 0xe4, 0x1, 0, 1); + /* + * configure registers 0xe2, 0xe3 with the + * appropriate DDL target oscillation frequency + * 0x1cc(460) + */ + osc_freq_target = freqranges[index].osc_freq_target; + dwc_dphy_ifc_write_mask(isys, phy_id, 0xe2, + osc_freq_target & 0xff, 0, 8); + dwc_dphy_ifc_write_mask(isys, phy_id, 0xe3, + (osc_freq_target >> 8) & 0xf, 0, 4); + + if (mbps < 1500) { + /* deskew_polarity_rw, for < 1.5Gbps */ + dwc_dphy_ifc_write_mask(isys, phy_id, 0x8, 0x1, 5, 1); + } + + /* + * Set cfgclkfreqrange[5:0] = round[(Fcfg_clk(MHz)-17)*4] + * (38.4 - 17) * 4 = ~85 (0x55) + */ + cfg_clk_freqrange = (isp->buttress.ref_clk - 170) * 4 / 10; + dev_dbg(dev, "ref_clk = %u clk_freqrange = %u", + isp->buttress.ref_clk, cfg_clk_freqrange); + dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_CFGCLKFREQRANGE, + cfg_clk_freqrange, 0, 8); + + dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0x1, 4, 1); + dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0x1, 8, 1); + + return 0; +} + +static void ipu6_isys_dwc_phy_aggr_setup(struct ipu6_isys *isys, u32 master, + u32 slave, u32 mbps) +{ + /* Config mastermacro */ + dwc_dphy_ifc_write_mask(isys, master, 0x133, 0x1, 0, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x133, 0x0, 0, 1); + + /* Config master PHY clk lane to drive long channel clk */ + dwc_dphy_ifc_write_mask(isys, master, 0x307, 0x1, 2, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x307, 0x0, 2, 1); + + /* Config both PHYs data lanes to get clk from long channel */ + dwc_dphy_ifc_write_mask(isys, master, 0x508, 0x1, 5, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x508, 0x1, 5, 1); + dwc_dphy_ifc_write_mask(isys, master, 0x708, 0x1, 5, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x708, 0x1, 5, 1); + + /* Config slave PHY clk lane to bypass long channel clk to DDR clk */ + dwc_dphy_ifc_write_mask(isys, master, 0x308, 0x0, 3, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x308, 0x1, 3, 1); + + /* Override slave PHY clk lane enable (DPHYRXCLK_CLL_demux module) */ + dwc_dphy_ifc_write_mask(isys, slave, 0xe0, 0x3, 0, 2); + + /* Override slave PHY DDR clk lane enable (DPHYHSRX_div124 module) */ + dwc_dphy_ifc_write_mask(isys, slave, 0xe1, 0x1, 1, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x307, 0x1, 3, 1); + + /* Turn off slave PHY LP-RX clk lane */ + dwc_dphy_ifc_write_mask(isys, slave, 0x304, 0x1, 7, 1); + dwc_dphy_ifc_write_mask(isys, slave, 0x305, 0xa, 0, 5); +} + +#define PHY_E 4 +static int ipu6_isys_dwc_phy_powerup_ack(struct ipu6_isys *isys, u32 phy_id) +{ + struct device *dev = &isys->adev->auxdev.dev; + u32 rescal_done; + int ret; + + ret = dwc_dphy_pwr_up(isys, phy_id); + if (ret != 0) { + dev_err(dev, "Dphy %u power up failed(%d)", phy_id, ret); + return ret; + } + + /* reset forcerxmode */ + dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0, 4, 1); + dwc_dphy_write_mask(isys, phy_id, IPU6_DWC_DPHY_DFT_CTRL2, 0, 8, 1); + + dev_dbg(dev, "Dphy %u is ready!", phy_id); + + if (phy_id != PHY_E || isys->phy_termcal_val) + return 0; + + usleep_range(100, 200); + rescal_done = dwc_dphy_ifc_read_mask(isys, phy_id, 0x221, 7, 1); + if (rescal_done) { + isys->phy_termcal_val = dwc_dphy_ifc_read_mask(isys, phy_id, + 0x220, 2, 4); + dev_dbg(dev, "termcal done with value = %u", + isys->phy_termcal_val); + } + + return 0; +} + +static void ipu6_isys_dwc_phy_reset(struct ipu6_isys *isys, u32 phy_id) +{ + dev_dbg(&isys->adev->auxdev.dev, "Reset phy %u", phy_id); + + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_SHUTDOWNZ, 0); + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_RSTZ, 0); + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_ACCESS_MODE, + TEST_IFC_ACCESS_MODE_FSM); + dwc_dphy_write(isys, phy_id, IPU6_DWC_DPHY_TEST_IFC_REQ, + TEST_IFC_REQ_RESET); +} + +int ipu6_isys_dwc_phy_set_power(struct ipu6_isys *isys, + struct ipu6_isys_csi2_config *cfg, + const struct ipu6_isys_csi2_timing *timing, + bool on) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + u32 phy_id, primary, secondary; + u32 nlanes, port, mbps; + s64 link_freq; + int ret; + + port = cfg->port; + + if (!isys_base || port >= isys->pdata->ipdata->csi2.nports) { + dev_warn(dev, "invalid port ID %d\n", port); + return -EINVAL; + } + + nlanes = cfg->nlanes; + /* only port 0, 2 and 4 support 4 lanes */ + if (nlanes == 4 && port % 2) { + dev_err(dev, "invalid csi-port %u with %u lanes\n", port, + nlanes); + return -EINVAL; + } + + link_freq = ipu6_isys_csi2_get_link_freq(&isys->csi2[port]); + if (link_freq < 0) { + dev_err(dev, "get link freq failed(%lld).\n", link_freq); + return link_freq; + } + + mbps = div_u64(link_freq, 500000); + + phy_id = port; + primary = port & ~1; + secondary = primary + 1; + if (on) { + if (nlanes == 4) { + dev_dbg(dev, "config phy %u and %u in aggr mode\n", + primary, secondary); + + ipu6_isys_dwc_phy_reset(isys, primary); + ipu6_isys_dwc_phy_reset(isys, secondary); + ipu6_isys_dwc_phy_aggr_setup(isys, primary, + secondary, mbps); + + ret = ipu6_isys_dwc_phy_config(isys, primary, mbps); + if (ret) + return ret; + ret = ipu6_isys_dwc_phy_config(isys, secondary, mbps); + if (ret) + return ret; + + ret = ipu6_isys_dwc_phy_powerup_ack(isys, primary); + if (ret) + return ret; + + ret = ipu6_isys_dwc_phy_powerup_ack(isys, secondary); + return ret; + } + + dev_dbg(dev, "config phy %u with %u lanes in non-aggr mode\n", + phy_id, nlanes); + + ipu6_isys_dwc_phy_reset(isys, phy_id); + ret = ipu6_isys_dwc_phy_config(isys, phy_id, mbps); + if (ret) + return ret; + + ret = ipu6_isys_dwc_phy_powerup_ack(isys, phy_id); + return ret; + } + + if (nlanes == 4) { + dev_dbg(dev, "Power down phy %u and phy %u for port %u\n", + primary, secondary, port); + ipu6_isys_dwc_phy_reset(isys, secondary); + ipu6_isys_dwc_phy_reset(isys, primary); + + return 0; + } + + dev_dbg(dev, "Powerdown phy %u with %u lanes\n", phy_id, nlanes); + + ipu6_isys_dwc_phy_reset(isys, phy_id); + + return 0; +} diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c b/drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c new file mode 100644 index 000000000000..c804291cfae9 --- /dev/null +++ b/drivers/media/pci/intel/ipu6/ipu6-isys-jsl-phy.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013--2024 Intel Corporation + */ + +#include +#include +#include +#include + +#include "ipu6-bus.h" +#include "ipu6-isys.h" +#include "ipu6-isys-csi2.h" +#include "ipu6-platform-isys-csi2-reg.h" + +/* only use BB0, BB2, BB4, and BB6 on PHY0 */ +#define IPU6SE_ISYS_PHY_BB_NUM 4 +#define IPU6SE_ISYS_PHY_0_BASE 0x10000 + +#define PHY_CPHY_DLL_OVRD(x) (0x100 + 0x100 * (x)) +#define PHY_CPHY_RX_CONTROL1(x) (0x110 + 0x100 * (x)) +#define PHY_DPHY_CFG(x) (0x148 + 0x100 * (x)) +#define PHY_BB_AFE_CONFIG(x) (0x174 + 0x100 * (x)) + +/* + * use port_cfg to configure that which data lanes used + * +---------+ +------+ +-----+ + * | port0 x4<-----| | | | + * | | | port | | | + * | port1 x2<-----| | | | + * | | | <-| PHY | + * | port2 x4<-----| | | | + * | | |config| | | + * | port3 x2<-----| | | | + * +---------+ +------+ +-----+ + */ +static const unsigned int csi2_port_cfg[][3] = { + {0, 0, 0x1f}, /* no link */ + {4, 0, 0x10}, /* x4 + x4 config */ + {2, 0, 0x12}, /* x2 + x2 config */ + {1, 0, 0x13}, /* x1 + x1 config */ + {2, 1, 0x15}, /* x2x1 + x2x1 config */ + {1, 1, 0x16}, /* x1x1 + x1x1 config */ + {2, 2, 0x18}, /* x2x2 + x2x2 config */ + {1, 2, 0x19} /* x1x2 + x1x2 config */ +}; + +/* port, nlanes, bbindex, portcfg */ +static const unsigned int phy_port_cfg[][4] = { + /* sip0 */ + {0, 1, 0, 0x15}, + {0, 2, 0, 0x15}, + {0, 4, 0, 0x15}, + {0, 4, 2, 0x22}, + /* sip1 */ + {2, 1, 4, 0x15}, + {2, 2, 4, 0x15}, + {2, 4, 4, 0x15}, + {2, 4, 6, 0x22} +}; + +static void ipu6_isys_csi2_phy_config_by_port(struct ipu6_isys *isys, + unsigned int port, + unsigned int nlanes) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *base = isys->adev->isp->base; + unsigned int bbnum; + u32 val, reg, i; + + dev_dbg(dev, "port %u with %u lanes", port, nlanes); + + /* only support <1.5Gbps */ + for (i = 0; i < IPU6SE_ISYS_PHY_BB_NUM; i++) { + /* cphy_dll_ovrd.crcdc_fsm_dlane0 = 13 */ + reg = IPU6SE_ISYS_PHY_0_BASE + PHY_CPHY_DLL_OVRD(i); + val = readl(base + reg); + val |= FIELD_PREP(GENMASK(6, 1), 13); + writel(val, base + reg); + + /* cphy_rx_control1.en_crc1 = 1 */ + reg = IPU6SE_ISYS_PHY_0_BASE + PHY_CPHY_RX_CONTROL1(i); + val = readl(base + reg); + val |= BIT(31); + writel(val, base + reg); + + /* dphy_cfg.reserved = 1, .lden_from_dll_ovrd_0 = 1 */ + reg = IPU6SE_ISYS_PHY_0_BASE + PHY_DPHY_CFG(i); + val = readl(base + reg); + val |= BIT(25) | BIT(26); + writel(val, base + reg); + + /* cphy_dll_ovrd.lden_crcdc_fsm_dlane0 = 1 */ + reg = IPU6SE_ISYS_PHY_0_BASE + PHY_CPHY_DLL_OVRD(i); + val = readl(base + reg); + val |= BIT(0); + writel(val, base + reg); + } + + /* Front end config, use minimal channel loss */ + for (i = 0; i < ARRAY_SIZE(phy_port_cfg); i++) { + if (phy_port_cfg[i][0] == port && + phy_port_cfg[i][1] == nlanes) { + bbnum = phy_port_cfg[i][2] / 2; + reg = IPU6SE_ISYS_PHY_0_BASE + PHY_BB_AFE_CONFIG(bbnum); + val = readl(base + reg); + val |= phy_port_cfg[i][3]; + writel(val, base + reg); + } + } +} + +static void ipu6_isys_csi2_rx_control(struct ipu6_isys *isys) +{ + void __iomem *base = isys->adev->isp->base; + u32 val, reg; + + reg = CSI2_HUB_GPREG_SIP0_CSI_RX_A_CONTROL; + val = readl(base + reg); + val |= BIT(0); + writel(val, base + CSI2_HUB_GPREG_SIP0_CSI_RX_A_CONTROL); + + reg = CSI2_HUB_GPREG_SIP0_CSI_RX_B_CONTROL; + val = readl(base + reg); + val |= BIT(0); + writel(val, base + CSI2_HUB_GPREG_SIP0_CSI_RX_B_CONTROL); + + reg = CSI2_HUB_GPREG_SIP1_CSI_RX_A_CONTROL; + val = readl(base + reg); + val |= BIT(0); + writel(val, base + CSI2_HUB_GPREG_SIP1_CSI_RX_A_CONTROL); + + reg = CSI2_HUB_GPREG_SIP1_CSI_RX_B_CONTROL; + val = readl(base + reg); + val |= BIT(0); + writel(val, base + CSI2_HUB_GPREG_SIP1_CSI_RX_B_CONTROL); +} + +static int ipu6_isys_csi2_set_port_cfg(struct ipu6_isys *isys, + unsigned int port, unsigned int nlanes) +{ + struct device *dev = &isys->adev->auxdev.dev; + unsigned int sip = port / 2; + unsigned int index; + + switch (nlanes) { + case 1: + index = 5; + break; + case 2: + index = 6; + break; + case 4: + index = 1; + break; + default: + dev_err(dev, "lanes nr %u is unsupported\n", nlanes); + return -EINVAL; + } + + dev_dbg(dev, "port config for port %u with %u lanes\n", port, nlanes); + + writel(csi2_port_cfg[index][2], + isys->pdata->base + CSI2_HUB_GPREG_SIP_FB_PORT_CFG(sip)); + + return 0; +} + +static void +ipu6_isys_csi2_set_timing(struct ipu6_isys *isys, + const struct ipu6_isys_csi2_timing *timing, + unsigned int port, unsigned int nlanes) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *reg; + u32 port_base; + u32 i; + + port_base = (port % 2) ? CSI2_SIP_TOP_CSI_RX_PORT_BASE_1(port) : + CSI2_SIP_TOP_CSI_RX_PORT_BASE_0(port); + + dev_dbg(dev, "set timing for port %u with %u lanes\n", port, nlanes); + + reg = isys->pdata->base + port_base; + reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_TERMEN_CLANE; + + writel(timing->ctermen, reg); + + reg = isys->pdata->base + port_base; + reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_SETTLE_CLANE; + writel(timing->csettle, reg); + + for (i = 0; i < nlanes; i++) { + reg = isys->pdata->base + port_base; + reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_TERMEN_DLANE(i); + writel(timing->dtermen, reg); + + reg = isys->pdata->base + port_base; + reg += CSI2_SIP_TOP_CSI_RX_DLY_CNT_SETTLE_DLANE(i); + writel(timing->dsettle, reg); + } +} + +#define DPHY_TIMER_INCR 0x28 +int ipu6_isys_jsl_phy_set_power(struct ipu6_isys *isys, + struct ipu6_isys_csi2_config *cfg, + const struct ipu6_isys_csi2_timing *timing, + bool on) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + int ret = 0; + u32 nlanes; + u32 port; + + if (!on) + return 0; + + port = cfg->port; + nlanes = cfg->nlanes; + + if (!isys_base || port >= isys->pdata->ipdata->csi2.nports) { + dev_warn(dev, "invalid port ID %d\n", port); + return -EINVAL; + } + + ipu6_isys_csi2_phy_config_by_port(isys, port, nlanes); + + writel(DPHY_TIMER_INCR, + isys->pdata->base + CSI2_HUB_GPREG_DPHY_TIMER_INCR); + + /* set port cfg and rx timing */ + ipu6_isys_csi2_set_timing(isys, timing, port, nlanes); + + ret = ipu6_isys_csi2_set_port_cfg(isys, port, nlanes); + if (ret) + return ret; + + ipu6_isys_csi2_rx_control(isys); + + return 0; +} diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c b/drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c new file mode 100644 index 000000000000..71aa5009512a --- /dev/null +++ b/drivers/media/pci/intel/ipu6/ipu6-isys-mcd-phy.c @@ -0,0 +1,720 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013--2024 Intel Corporation + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "ipu6.h" +#include "ipu6-bus.h" +#include "ipu6-isys.h" +#include "ipu6-isys-csi2.h" +#include "ipu6-platform-isys-csi2-reg.h" + +#define CSI_REG_HUB_GPREG_PHY_CTL(id) (CSI_REG_BASE + 0x18008 + (id) * 0x8) +#define CSI_REG_HUB_GPREG_PHY_CTL_RESET BIT(4) +#define CSI_REG_HUB_GPREG_PHY_CTL_PWR_EN BIT(0) +#define CSI_REG_HUB_GPREG_PHY_STATUS(id) (CSI_REG_BASE + 0x1800c + (id) * 0x8) +#define CSI_REG_HUB_GPREG_PHY_POWER_ACK BIT(0) +#define CSI_REG_HUB_GPREG_PHY_READY BIT(4) + +#define MCD_PHY_POWER_STATUS_TIMEOUT (200 * USEC_PER_MSEC) + +/* + * bridge to phy in buttress reg map, each phy has 16 kbytes + * only 2 phys for TGL U and Y + */ +#define IPU6_ISYS_MCD_PHY_BASE(i) (0x10000 + (i) * 0x4000) + +/* + * There are 2 MCD DPHY instances on TGL and 1 MCD DPHY instance on ADL. + * Each MCD PHY has 12-lanes which has 8 data lanes and 4 clock lanes. + * CSI port 1, 3 (5, 7) can support max 2 data lanes. + * CSI port 0, 2 (4, 6) can support max 4 data lanes. + * PHY configurations are PPI based instead of port. + * Left: + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | PPI | PPI5 | PPI4 | PPI3 | PPI2 | PPI1 | PPI0 | + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x4 | unused | D3 | D2 | C0 | D0 | D1 | + * |---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x2x2 | C1 | D0 | D1 | C0 | D0 | D1 | + * ----------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x2x1 | C1 | D0 | unused | C0 | D0 | D1 | + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x1x1 | C1 | D0 | unused | C0 | D0 | unused | + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x1x2 | C1 | D0 | D1 | C0 | D0 | unused | + * +---------+---------+---------+---------+--------+---------+----------+ + * + * Right: + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | PPI | PPI6 | PPI7 | PPI8 | PPI9 | PPI10 | PPI11 | + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x4 | D1 | D0 | C2 | D2 | D3 | unused | + * |---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x2x2 | D1 | D0 | C2 | D1 | D0 | C3 | + * ----------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x2x1 | D1 | D0 | C2 | unused | D0 | C3 | + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x1x1 | unused | D0 | C2 | unused | D0 | C3 | + * +---------+---------+---------+---------+--------+---------+----------+ + * | | | | | | | | + * | x1x2 | unused | D0 | C2 | D1 | D0 | C3 | + * +---------+---------+---------+---------+--------+---------+----------+ + * + * ppi mapping per phy : + * + * x4 + x4: + * Left : port0 - PPI range {0, 1, 2, 3, 4} + * Right: port2 - PPI range {6, 7, 8, 9, 10} + * + * x4 + x2x2: + * Left: port0 - PPI range {0, 1, 2, 3, 4} + * Right: port2 - PPI range {6, 7, 8}, port3 - PPI range {9, 10, 11} + * + * x2x2 + x4: + * Left: port0 - PPI range {0, 1, 2}, port1 - PPI range {3, 4, 5} + * Right: port2 - PPI range {6, 7, 8, 9, 10} + * + * x2x2 + x2x2: + * Left : port0 - PPI range {0, 1, 2}, port1 - PPI range {3, 4, 5} + * Right: port2 - PPI range {6, 7, 8}, port3 - PPI range {9, 10, 11} + */ + +struct phy_reg { + u32 reg; + u32 val; +}; + +static const struct phy_reg common_init_regs[] = { + /* for TGL-U, use 0x80000000 */ + {0x00000040, 0x80000000}, + {0x00000044, 0x00a80880}, + {0x00000044, 0x00b80880}, + {0x00000010, 0x0000078c}, + {0x00000344, 0x2f4401e2}, + {0x00000544, 0x924401e2}, + {0x00000744, 0x594401e2}, + {0x00000944, 0x624401e2}, + {0x00000b44, 0xfc4401e2}, + {0x00000d44, 0xc54401e2}, + {0x00000f44, 0x034401e2}, + {0x00001144, 0x8f4401e2}, + {0x00001344, 0x754401e2}, + {0x00001544, 0xe94401e2}, + {0x00001744, 0xcb4401e2}, + {0x00001944, 0xfa4401e2} +}; + +static const struct phy_reg x1_port0_config_regs[] = { + {0x00000694, 0xc80060fa}, + {0x00000680, 0x3d4f78ea}, + {0x00000690, 0x10a0140b}, + {0x000006a8, 0xdf04010a}, + {0x00000700, 0x57050060}, + {0x00000710, 0x0030001c}, + {0x00000738, 0x5f004444}, + {0x0000073c, 0x78464204}, + {0x00000748, 0x7821f940}, + {0x0000074c, 0xb2000433}, + {0x00000494, 0xfe6030fa}, + {0x00000480, 0x29ef5ed0}, + {0x00000490, 0x10a0540b}, + {0x000004a8, 0x7a01010a}, + {0x00000500, 0xef053460}, + {0x00000510, 0xe030101c}, + {0x00000538, 0xdf808444}, + {0x0000053c, 0xc8422204}, + {0x00000540, 0x0180088c}, + {0x00000574, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x1_port1_config_regs[] = { + {0x00000c94, 0xc80060fa}, + {0x00000c80, 0xcf47abea}, + {0x00000c90, 0x10a0840b}, + {0x00000ca8, 0xdf04010a}, + {0x00000d00, 0x57050060}, + {0x00000d10, 0x0030001c}, + {0x00000d38, 0x5f004444}, + {0x00000d3c, 0x78464204}, + {0x00000d48, 0x7821f940}, + {0x00000d4c, 0xb2000433}, + {0x00000a94, 0xc91030fa}, + {0x00000a80, 0x5a166ed0}, + {0x00000a90, 0x10a0540b}, + {0x00000aa8, 0x5d060100}, + {0x00000b00, 0xef053460}, + {0x00000b10, 0xa030101c}, + {0x00000b38, 0xdf808444}, + {0x00000b3c, 0xc8422204}, + {0x00000b40, 0x0180088c}, + {0x00000b74, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x1_port2_config_regs[] = { + {0x00001294, 0x28f000fa}, + {0x00001280, 0x08130cea}, + {0x00001290, 0x10a0140b}, + {0x000012a8, 0xd704010a}, + {0x00001300, 0x8d050060}, + {0x00001310, 0x0030001c}, + {0x00001338, 0xdf008444}, + {0x0000133c, 0x78422204}, + {0x00001348, 0x7821f940}, + {0x0000134c, 0x5a000433}, + {0x00001094, 0x2d20b0fa}, + {0x00001080, 0xade75dd0}, + {0x00001090, 0x10a0540b}, + {0x000010a8, 0xb101010a}, + {0x00001100, 0x33053460}, + {0x00001110, 0x0030101c}, + {0x00001138, 0xdf808444}, + {0x0000113c, 0xc8422204}, + {0x00001140, 0x8180088c}, + {0x00001174, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x1_port3_config_regs[] = { + {0x00001894, 0xc80060fa}, + {0x00001880, 0x0f90fd6a}, + {0x00001890, 0x10a0840b}, + {0x000018a8, 0xdf04010a}, + {0x00001900, 0x57050060}, + {0x00001910, 0x0030001c}, + {0x00001938, 0x5f004444}, + {0x0000193c, 0x78464204}, + {0x00001948, 0x7821f940}, + {0x0000194c, 0xb2000433}, + {0x00001694, 0x3050d0fa}, + {0x00001680, 0x0ef6d050}, + {0x00001690, 0x10a0540b}, + {0x000016a8, 0xe301010a}, + {0x00001700, 0x69053460}, + {0x00001710, 0xa030101c}, + {0x00001738, 0xdf808444}, + {0x0000173c, 0xc8422204}, + {0x00001740, 0x0180088c}, + {0x00001774, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x2_port0_config_regs[] = { + {0x00000694, 0xc80060fa}, + {0x00000680, 0x3d4f78ea}, + {0x00000690, 0x10a0140b}, + {0x000006a8, 0xdf04010a}, + {0x00000700, 0x57050060}, + {0x00000710, 0x0030001c}, + {0x00000738, 0x5f004444}, + {0x0000073c, 0x78464204}, + {0x00000748, 0x7821f940}, + {0x0000074c, 0xb2000433}, + {0x00000494, 0xc80060fa}, + {0x00000480, 0x29ef5ed8}, + {0x00000490, 0x10a0540b}, + {0x000004a8, 0x7a01010a}, + {0x00000500, 0xef053460}, + {0x00000510, 0xe030101c}, + {0x00000538, 0xdf808444}, + {0x0000053c, 0xc8422204}, + {0x00000540, 0x0180088c}, + {0x00000574, 0x00000000}, + {0x00000294, 0xc80060fa}, + {0x00000280, 0xcb45b950}, + {0x00000290, 0x10a0540b}, + {0x000002a8, 0x8c01010a}, + {0x00000300, 0xef053460}, + {0x00000310, 0x8030101c}, + {0x00000338, 0x41808444}, + {0x0000033c, 0x32422204}, + {0x00000340, 0x0180088c}, + {0x00000374, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x2_port1_config_regs[] = { + {0x00000c94, 0xc80060fa}, + {0x00000c80, 0xcf47abea}, + {0x00000c90, 0x10a0840b}, + {0x00000ca8, 0xdf04010a}, + {0x00000d00, 0x57050060}, + {0x00000d10, 0x0030001c}, + {0x00000d38, 0x5f004444}, + {0x00000d3c, 0x78464204}, + {0x00000d48, 0x7821f940}, + {0x00000d4c, 0xb2000433}, + {0x00000a94, 0xc80060fa}, + {0x00000a80, 0x5a166ed8}, + {0x00000a90, 0x10a0540b}, + {0x00000aa8, 0x7a01010a}, + {0x00000b00, 0xef053460}, + {0x00000b10, 0xa030101c}, + {0x00000b38, 0xdf808444}, + {0x00000b3c, 0xc8422204}, + {0x00000b40, 0x0180088c}, + {0x00000b74, 0x00000000}, + {0x00000894, 0xc80060fa}, + {0x00000880, 0x4d4f21d0}, + {0x00000890, 0x10a0540b}, + {0x000008a8, 0x5601010a}, + {0x00000900, 0xef053460}, + {0x00000910, 0x8030101c}, + {0x00000938, 0xdf808444}, + {0x0000093c, 0xc8422204}, + {0x00000940, 0x0180088c}, + {0x00000974, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x2_port2_config_regs[] = { + {0x00001294, 0xc80060fa}, + {0x00001280, 0x08130cea}, + {0x00001290, 0x10a0140b}, + {0x000012a8, 0xd704010a}, + {0x00001300, 0x8d050060}, + {0x00001310, 0x0030001c}, + {0x00001338, 0xdf008444}, + {0x0000133c, 0x78422204}, + {0x00001348, 0x7821f940}, + {0x0000134c, 0x5a000433}, + {0x00001094, 0xc80060fa}, + {0x00001080, 0xade75dd8}, + {0x00001090, 0x10a0540b}, + {0x000010a8, 0xb101010a}, + {0x00001100, 0x33053460}, + {0x00001110, 0x0030101c}, + {0x00001138, 0xdf808444}, + {0x0000113c, 0xc8422204}, + {0x00001140, 0x8180088c}, + {0x00001174, 0x00000000}, + {0x00000e94, 0xc80060fa}, + {0x00000e80, 0x0fbf16d0}, + {0x00000e90, 0x10a0540b}, + {0x00000ea8, 0x7a01010a}, + {0x00000f00, 0xf5053460}, + {0x00000f10, 0xc030101c}, + {0x00000f38, 0xdf808444}, + {0x00000f3c, 0xc8422204}, + {0x00000f40, 0x8180088c}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x2_port3_config_regs[] = { + {0x00001894, 0xc80060fa}, + {0x00001880, 0x0f90fd6a}, + {0x00001890, 0x10a0840b}, + {0x000018a8, 0xdf04010a}, + {0x00001900, 0x57050060}, + {0x00001910, 0x0030001c}, + {0x00001938, 0x5f004444}, + {0x0000193c, 0x78464204}, + {0x00001948, 0x7821f940}, + {0x0000194c, 0xb2000433}, + {0x00001694, 0xc80060fa}, + {0x00001680, 0x0ef6d058}, + {0x00001690, 0x10a0540b}, + {0x000016a8, 0x7a01010a}, + {0x00001700, 0x69053460}, + {0x00001710, 0xa030101c}, + {0x00001738, 0xdf808444}, + {0x0000173c, 0xc8422204}, + {0x00001740, 0x0180088c}, + {0x00001774, 0x00000000}, + {0x00001494, 0xc80060fa}, + {0x00001480, 0xf9d34bd0}, + {0x00001490, 0x10a0540b}, + {0x000014a8, 0x7a01010a}, + {0x00001500, 0x1b053460}, + {0x00001510, 0x0030101c}, + {0x00001538, 0xdf808444}, + {0x0000153c, 0xc8422204}, + {0x00001540, 0x8180088c}, + {0x00001574, 0x00000000}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x4_port0_config_regs[] = { + {0x00000694, 0xc80060fa}, + {0x00000680, 0x3d4f78fa}, + {0x00000690, 0x10a0140b}, + {0x000006a8, 0xdf04010a}, + {0x00000700, 0x57050060}, + {0x00000710, 0x0030001c}, + {0x00000738, 0x5f004444}, + {0x0000073c, 0x78464204}, + {0x00000748, 0x7821f940}, + {0x0000074c, 0xb2000433}, + {0x00000494, 0xfe6030fa}, + {0x00000480, 0x29ef5ed8}, + {0x00000490, 0x10a0540b}, + {0x000004a8, 0x7a01010a}, + {0x00000500, 0xef053460}, + {0x00000510, 0xe030101c}, + {0x00000538, 0xdf808444}, + {0x0000053c, 0xc8422204}, + {0x00000540, 0x0180088c}, + {0x00000574, 0x00000004}, + {0x00000294, 0x23e030fa}, + {0x00000280, 0xcb45b950}, + {0x00000290, 0x10a0540b}, + {0x000002a8, 0x8c01010a}, + {0x00000300, 0xef053460}, + {0x00000310, 0x8030101c}, + {0x00000338, 0x41808444}, + {0x0000033c, 0x32422204}, + {0x00000340, 0x0180088c}, + {0x00000374, 0x00000004}, + {0x00000894, 0x5620b0fa}, + {0x00000880, 0x4d4f21dc}, + {0x00000890, 0x10a0540b}, + {0x000008a8, 0x5601010a}, + {0x00000900, 0xef053460}, + {0x00000910, 0x8030101c}, + {0x00000938, 0xdf808444}, + {0x0000093c, 0xc8422204}, + {0x00000940, 0x0180088c}, + {0x00000974, 0x00000004}, + {0x00000a94, 0xc91030fa}, + {0x00000a80, 0x5a166ecc}, + {0x00000a90, 0x10a0540b}, + {0x00000aa8, 0x5d01010a}, + {0x00000b00, 0xef053460}, + {0x00000b10, 0xa030101c}, + {0x00000b38, 0xdf808444}, + {0x00000b3c, 0xc8422204}, + {0x00000b40, 0x0180088c}, + {0x00000b74, 0x00000004}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x4_port1_config_regs[] = { + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x4_port2_config_regs[] = { + {0x00001294, 0x28f000fa}, + {0x00001280, 0x08130cfa}, + {0x00001290, 0x10c0140b}, + {0x000012a8, 0xd704010a}, + {0x00001300, 0x8d050060}, + {0x00001310, 0x0030001c}, + {0x00001338, 0xdf008444}, + {0x0000133c, 0x78422204}, + {0x00001348, 0x7821f940}, + {0x0000134c, 0x5a000433}, + {0x00001094, 0x2d20b0fa}, + {0x00001080, 0xade75dd8}, + {0x00001090, 0x10a0540b}, + {0x000010a8, 0xb101010a}, + {0x00001100, 0x33053460}, + {0x00001110, 0x0030101c}, + {0x00001138, 0xdf808444}, + {0x0000113c, 0xc8422204}, + {0x00001140, 0x8180088c}, + {0x00001174, 0x00000004}, + {0x00000e94, 0xd308d0fa}, + {0x00000e80, 0x0fbf16d0}, + {0x00000e90, 0x10a0540b}, + {0x00000ea8, 0x2c01010a}, + {0x00000f00, 0xf5053460}, + {0x00000f10, 0xc030101c}, + {0x00000f38, 0xdf808444}, + {0x00000f3c, 0xc8422204}, + {0x00000f40, 0x8180088c}, + {0x00000f74, 0x00000004}, + {0x00001494, 0x136850fa}, + {0x00001480, 0xf9d34bdc}, + {0x00001490, 0x10a0540b}, + {0x000014a8, 0x5a01010a}, + {0x00001500, 0x1b053460}, + {0x00001510, 0x0030101c}, + {0x00001538, 0xdf808444}, + {0x0000153c, 0xc8422204}, + {0x00001540, 0x8180088c}, + {0x00001574, 0x00000004}, + {0x00001694, 0x3050d0fa}, + {0x00001680, 0x0ef6d04c}, + {0x00001690, 0x10a0540b}, + {0x000016a8, 0xe301010a}, + {0x00001700, 0x69053460}, + {0x00001710, 0xa030101c}, + {0x00001738, 0xdf808444}, + {0x0000173c, 0xc8422204}, + {0x00001740, 0x0180088c}, + {0x00001774, 0x00000004}, + {0x00000000, 0x00000000} +}; + +static const struct phy_reg x4_port3_config_regs[] = { + {0x00000000, 0x00000000} +}; + +static const struct phy_reg *x1_config_regs[4] = { + x1_port0_config_regs, + x1_port1_config_regs, + x1_port2_config_regs, + x1_port3_config_regs +}; + +static const struct phy_reg *x2_config_regs[4] = { + x2_port0_config_regs, + x2_port1_config_regs, + x2_port2_config_regs, + x2_port3_config_regs +}; + +static const struct phy_reg *x4_config_regs[4] = { + x4_port0_config_regs, + x4_port1_config_regs, + x4_port2_config_regs, + x4_port3_config_regs +}; + +static const struct phy_reg **config_regs[3] = { + x1_config_regs, + x2_config_regs, + x4_config_regs +}; + +static int ipu6_isys_mcd_phy_powerup_ack(struct ipu6_isys *isys, u8 id) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + u32 val; + int ret; + + val = readl(isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id)); + val |= CSI_REG_HUB_GPREG_PHY_CTL_PWR_EN; + writel(val, isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id)); + + ret = readl_poll_timeout(isys_base + CSI_REG_HUB_GPREG_PHY_STATUS(id), + val, val & CSI_REG_HUB_GPREG_PHY_POWER_ACK, + 200, MCD_PHY_POWER_STATUS_TIMEOUT); + if (ret) + dev_err(dev, "PHY%d powerup ack timeout", id); + + return ret; +} + +static int ipu6_isys_mcd_phy_powerdown_ack(struct ipu6_isys *isys, u8 id) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + u32 val; + int ret; + + writel(0, isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id)); + ret = readl_poll_timeout(isys_base + CSI_REG_HUB_GPREG_PHY_STATUS(id), + val, !(val & CSI_REG_HUB_GPREG_PHY_POWER_ACK), + 200, MCD_PHY_POWER_STATUS_TIMEOUT); + if (ret) + dev_err(dev, "PHY%d powerdown ack timeout", id); + + return ret; +} + +static void ipu6_isys_mcd_phy_reset(struct ipu6_isys *isys, u8 id, bool assert) +{ + void __iomem *isys_base = isys->pdata->base; + u32 val; + + val = readl(isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id)); + if (assert) + val |= CSI_REG_HUB_GPREG_PHY_CTL_RESET; + else + val &= ~(CSI_REG_HUB_GPREG_PHY_CTL_RESET); + + writel(val, isys_base + CSI_REG_HUB_GPREG_PHY_CTL(id)); +} + +static int ipu6_isys_mcd_phy_ready(struct ipu6_isys *isys, u8 id) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + u32 val; + int ret; + + ret = readl_poll_timeout(isys_base + CSI_REG_HUB_GPREG_PHY_STATUS(id), + val, val & CSI_REG_HUB_GPREG_PHY_READY, + 200, MCD_PHY_POWER_STATUS_TIMEOUT); + if (ret) + dev_err(dev, "PHY%d ready ack timeout", id); + + return ret; +} + +static void ipu6_isys_mcd_phy_common_init(struct ipu6_isys *isys) +{ + struct ipu6_bus_device *adev = isys->adev; + struct ipu6_device *isp = adev->isp; + void __iomem *isp_base = isp->base; + struct sensor_async_sd *s_asd; + struct v4l2_async_connection *asc; + void __iomem *phy_base; + unsigned int i; + u8 phy_id; + + list_for_each_entry(asc, &isys->notifier.done_list, asc_entry) { + s_asd = container_of(asc, struct sensor_async_sd, asc); + phy_id = s_asd->csi2.port / 4; + phy_base = isp_base + IPU6_ISYS_MCD_PHY_BASE(phy_id); + + for (i = 0; i < ARRAY_SIZE(common_init_regs); i++) + writel(common_init_regs[i].val, + phy_base + common_init_regs[i].reg); + } +} + +static int ipu6_isys_driver_port_to_phy_port(struct ipu6_isys_csi2_config *cfg) +{ + int phy_port; + int ret; + + if (!(cfg->nlanes == 4 || cfg->nlanes == 2 || cfg->nlanes == 1)) + return -EINVAL; + + /* B,F -> C0 A,E -> C1 C,G -> C2 D,H -> C4 */ + /* normalize driver port number */ + phy_port = cfg->port % 4; + + /* swap port number only for A and B */ + if (phy_port == 0) + phy_port = 1; + else if (phy_port == 1) + phy_port = 0; + + ret = phy_port; + + /* check validity per lane configuration */ + if (cfg->nlanes == 4 && !(phy_port == 0 || phy_port == 2)) + ret = -EINVAL; + else if ((cfg->nlanes == 2 || cfg->nlanes == 1) && + !(phy_port >= 0 && phy_port <= 3)) + ret = -EINVAL; + + return ret; +} + +static int ipu6_isys_mcd_phy_config(struct ipu6_isys *isys) +{ + struct device *dev = &isys->adev->auxdev.dev; + struct ipu6_bus_device *adev = isys->adev; + const struct phy_reg **phy_config_regs; + struct ipu6_device *isp = adev->isp; + void __iomem *isp_base = isp->base; + struct sensor_async_sd *s_asd; + struct ipu6_isys_csi2_config cfg; + struct v4l2_async_connection *asc; + int phy_port, phy_id; + unsigned int i; + void __iomem *phy_base; + + list_for_each_entry(asc, &isys->notifier.done_list, asc_entry) { + s_asd = container_of(asc, struct sensor_async_sd, asc); + cfg.port = s_asd->csi2.port; + cfg.nlanes = s_asd->csi2.nlanes; + phy_port = ipu6_isys_driver_port_to_phy_port(&cfg); + if (phy_port < 0) { + dev_err(dev, "invalid port %d for lane %d", cfg.port, + cfg.nlanes); + return -ENXIO; + } + + phy_id = cfg.port / 4; + phy_base = isp_base + IPU6_ISYS_MCD_PHY_BASE(phy_id); + dev_dbg(dev, "port%d PHY%u lanes %u\n", cfg.port, phy_id, + cfg.nlanes); + + phy_config_regs = config_regs[cfg.nlanes / 2]; + cfg.port = phy_port; + for (i = 0; phy_config_regs[cfg.port][i].reg; i++) + writel(phy_config_regs[cfg.port][i].val, + phy_base + phy_config_regs[cfg.port][i].reg); + } + + return 0; +} + +#define CSI_MCD_PHY_NUM 2 +static refcount_t phy_power_ref_count[CSI_MCD_PHY_NUM]; + +int ipu6_isys_mcd_phy_set_power(struct ipu6_isys *isys, + struct ipu6_isys_csi2_config *cfg, + const struct ipu6_isys_csi2_timing *timing, + bool on) +{ + struct device *dev = &isys->adev->auxdev.dev; + void __iomem *isys_base = isys->pdata->base; + u8 port, phy_id; + refcount_t *ref; + int ret; + + port = cfg->port; + phy_id = port / 4; + + ref = &phy_power_ref_count[phy_id]; + + dev_dbg(dev, "for phy %d port %d, lanes: %d\n", phy_id, port, + cfg->nlanes); + + if (!isys_base || port >= isys->pdata->ipdata->csi2.nports) { + dev_warn(dev, "invalid port ID %d\n", port); + return -EINVAL; + } + + if (on) { + if (refcount_read(ref)) { + dev_dbg(dev, "for phy %d is already UP", phy_id); + refcount_inc(ref); + return 0; + } + + ret = ipu6_isys_mcd_phy_powerup_ack(isys, phy_id); + if (ret) + return ret; + + ipu6_isys_mcd_phy_reset(isys, phy_id, 0); + ipu6_isys_mcd_phy_common_init(isys); + + ret = ipu6_isys_mcd_phy_config(isys); + if (ret) + return ret; + + ipu6_isys_mcd_phy_reset(isys, phy_id, 1); + ret = ipu6_isys_mcd_phy_ready(isys, phy_id); + if (ret) + return ret; + + refcount_set(ref, 1); + return 0; + } + + if (!refcount_dec_and_test(ref)) + return 0; + + return ipu6_isys_mcd_phy_powerdown_ack(isys, phy_id); +}