| Message ID | 20240506164941.110389-7-jacopo.mondi@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: renesas: rcar-csi2: Use the subdev active state | expand |
Hi Jacopo, Thank you for the patch. On Mon, May 06, 2024 at 06:49:34PM +0200, Jacopo Mondi wrote: > The adv748x-csi2 driver configures the CSI-2 transmitter to > automatically infer the image stream format from the connected > frontend (HDMI or AFE). > > Setting a new format on the subdevice hence does not actually control > the CSI-2 output format, but it's only there for the purpose of > pipeline validation. > > However, there is currently no validation that the supplied media bus > code is valid and supported by the device. > > With the introduction of enum_mbus_codes a list of supported format is > now available, use it to validate that the supplied format is correct > and use the default UYVY8 one if that's not the case. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > --- > drivers/media/i2c/adv748x/adv748x-csi2.c | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c > index 4fd6d3a681d5..3f22dc426d7a 100644 > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c > @@ -208,6 +208,23 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd, > return 0; > } > > +static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, > + unsigned int code) u32 code to match the data type from the format structure. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > +{ > + const unsigned int *codes = is_txa(tx) ? > + adv748x_csi2_txa_fmts : > + adv748x_csi2_txb_fmts; > + size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts) > + : ARRAY_SIZE(adv748x_csi2_txb_fmts); > + > + for (unsigned int i = 0; i < num_fmts; i++) { > + if (codes[i] == code) > + return true; > + } > + > + return false; > +} > + > static int adv748x_csi2_set_format(struct v4l2_subdev *sd, > struct v4l2_subdev_state *sd_state, > struct v4l2_subdev_format *sdformat) > @@ -217,6 +234,13 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mbusformat; > int ret = 0; > > + /* > + * Make sure the format is supported, if not default it to > + * UYVY8 as it's supported by both TXes. > + */ > + if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code)) > + sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16; > + > mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad, > sdformat->which); > if (!mbusformat)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c index 4fd6d3a681d5..3f22dc426d7a 100644 --- a/drivers/media/i2c/adv748x/adv748x-csi2.c +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c @@ -208,6 +208,23 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd, return 0; } +static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, + unsigned int code) +{ + const unsigned int *codes = is_txa(tx) ? + adv748x_csi2_txa_fmts : + adv748x_csi2_txb_fmts; + size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts) + : ARRAY_SIZE(adv748x_csi2_txb_fmts); + + for (unsigned int i = 0; i < num_fmts; i++) { + if (codes[i] == code) + return true; + } + + return false; +} + static int adv748x_csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *sdformat) @@ -217,6 +234,13 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mbusformat; int ret = 0; + /* + * Make sure the format is supported, if not default it to + * UYVY8 as it's supported by both TXes. + */ + if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code)) + sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16; + mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad, sdformat->which); if (!mbusformat)
The adv748x-csi2 driver configures the CSI-2 transmitter to automatically infer the image stream format from the connected frontend (HDMI or AFE). Setting a new format on the subdevice hence does not actually control the CSI-2 output format, but it's only there for the purpose of pipeline validation. However, there is currently no validation that the supplied media bus code is valid and supported by the device. With the introduction of enum_mbus_codes a list of supported format is now available, use it to validate that the supplied format is correct and use the default UYVY8 one if that's not the case. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- drivers/media/i2c/adv748x/adv748x-csi2.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)