diff mbox series

[v4,6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170

Message ID 20240522154659.510-7-quic_grosikop@quicinc.com (mailing list archive)
State New
Headers show
Series Move camss version related defs in to resources | expand

Commit Message

Gjorgji Rosikopulos (Consultant) May 22, 2024, 3:46 p.m. UTC
From: Milen Mitkov <quic_mmitkov@quicinc.com>

Split the RAW interface (RDI), the CSID receiver (RX)
and test pattern generator (testgen), configurations
for CSID on Titan 170

Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
---
 .../platform/qcom/camss/camss-csid-gen2.c     | 252 ++++++++++--------
 1 file changed, 139 insertions(+), 113 deletions(-)

Comments

kernel test robot May 23, 2024, 12:59 p.m. UTC | #1
Hi Gjorgji,

kernel test robot noticed the following build warnings:

[auto build test WARNING on media-tree/master]
[also build test WARNING on linus/master next-20240523]
[cannot apply to v6.9]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Gjorgji-Rosikopulos/media-qcom-camss-Add-per-sub-device-type-resources/20240522-235220
base:   git://linuxtv.org/media_tree.git master
patch link:    https://lore.kernel.org/r/20240522154659.510-7-quic_grosikop%40quicinc.com
patch subject: [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
config: arm64-defconfig (https://download.01.org/0day-ci/archive/20240523/202405232059.8lLokYw2-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240523/202405232059.8lLokYw2-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202405232059.8lLokYw2-lkp@intel.com/

All warnings (new ones prefixed by >>):

   drivers/media/platform/qcom/camss/camss-csid-gen2.c: In function '__csid_configure_rdi_stream':
>> drivers/media/platform/qcom/camss/camss-csid-gen2.c:265:13: warning: variable 'phy_sel' set but not used [-Wunused-but-set-variable]
     265 |         u32 phy_sel = 0;
         |             ^~~~~~~


vim +/phy_sel +265 drivers/media/platform/qcom/camss/camss-csid-gen2.c

   260	
   261	static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 vc)
   262	{
   263		struct csid_testgen_config *tg = &csid->testgen;
   264		u32 val;
 > 265		u32 phy_sel = 0;
   266		/* Source pads matching RDI channels on hardware. Pad 1 -> RDI0, Pad 2 -> RDI1, etc. */
   267		struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
   268		const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
   269									   csid->res->formats->nformats,
   270									   input_format->code);
   271	
   272		if (!tg->enabled)
   273			phy_sel = csid->phy.csiphy_id;
   274	
   275		/*
   276		 * DT_ID is a two bit bitfield that is concatenated with
   277		 * the four least significant bits of the five bit VC
   278		 * bitfield to generate an internal CID value.
   279		 *
   280		 * CSID_RDI_CFG0(vc)
   281		 * DT_ID : 28:27
   282		 * VC    : 26:22
   283		 * DT    : 21:16
   284		 *
   285		 * CID   : VC 3:0 << 2 | DT_ID 1:0
   286		 */
   287		u8 dt_id = vc & 0x03;
   288	
   289		val = 1 << RDI_CFG0_BYTE_CNTR_EN;
   290		val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
   291		val |= 1 << RDI_CFG0_TIMESTAMP_EN;
   292		/* note: for non-RDI path, this should be format->decode_format */
   293		val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
   294		val |= format->data_type << RDI_CFG0_DATA_TYPE;
   295		val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
   296		val |= dt_id << RDI_CFG0_DT_ID;
   297		writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
   298	
   299		/* CSID_TIMESTAMP_STB_POST_IRQ */
   300		val = 2 << RDI_CFG1_TIMESTAMP_STB_SEL;
   301		writel_relaxed(val, csid->base + CSID_RDI_CFG1(vc));
   302	
   303		val = 1;
   304		writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PERIOD(vc));
   305	
   306		val = 0;
   307		writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PATTERN(vc));
   308	
   309		val = 1;
   310		writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(vc));
   311	
   312		val = 0;
   313		writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(vc));
   314	
   315		val = 1;
   316		writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PERIOD(vc));
   317	
   318		val = 0;
   319		writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PATTERN(vc));
   320	
   321		val = 1;
   322		writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PERIOD(vc));
   323	
   324		val = 0;
   325		writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PATTERN(vc));
   326	
   327		val = 0;
   328		writel_relaxed(val, csid->base + CSID_RDI_CTRL(vc));
   329	
   330		val = readl_relaxed(csid->base + CSID_RDI_CFG0(vc));
   331		val |=  enable << RDI_CFG0_ENABLE;
   332		writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
   333	}
   334
Bryan O'Donoghue June 21, 2024, 3:05 p.m. UTC | #2
On 22/05/2024 16:46, Gjorgji Rosikopulos wrote:
> From: Milen Mitkov <quic_mmitkov@quicinc.com>
> 
> Split the RAW interface (RDI), the CSID receiver (RX)
> and test pattern generator (testgen), configurations
> for CSID on Titan 170
> 
> Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
> Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
> ---

Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Bryan O'Donoghue June 21, 2024, 3:09 p.m. UTC | #3
On 23/05/2024 13:59, kernel test robot wrote:
> Hi Gjorgji,
> 
> kernel test robot noticed the following build warnings:
> 
> [auto build test WARNING on media-tree/master]
> [also build test WARNING on linus/master next-20240523]
> [cannot apply to v6.9]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
> 
> url:https://github.com/intel-lab-lkp/linux/commits/Gjorgji-Rosikopulos/media-qcom-camss-Add-per-sub-device-type-resources/20240522-235220
> base:   git://linuxtv.org/media_tree.git master
> patch link:https://lore.kernel.org/r/20240522154659.510-7-quic_grosikop%40quicinc.com
> patch subject: [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI and RX for CSID 170
> config: arm64-defconfig (https://download.01.org/0day-ci/archive/20240523/202405232059.8lLokYw2-lkp@intel.com/config)
> compiler: aarch64-linux-gcc (GCC) 13.2.0
> reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240523/202405232059.8lLokYw2-lkp@intel.com/reproduce)
> 
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot<lkp@intel.com>
> | Closes:https://lore.kernel.org/oe-kbuild-all/202405232059.8lLokYw2-lkp@intel.com/
> 
> All warnings (new ones prefixed by >>):
> 
>     drivers/media/platform/qcom/camss/camss-csid-gen2.c: In function '__csid_configure_rdi_stream':
>>> drivers/media/platform/qcom/camss/camss-csid-gen2.c:265:13: warning: variable 'phy_sel' set but not used [-Wunused-but-set-variable]
>       265 |         u32 phy_sel = 0;
>           |             ^~~~~~~

Gjorgji.

This appears to be a dead variable now.

I don't see a need to respin this series but, could you send a 
supplementary patch to fix this up ?

---
bod
Gjorgji Rosikopulos (Consultant) June 25, 2024, 8:52 a.m. UTC | #4
Hi Bryan,


On 6/21/2024 6:09 PM, Bryan O'Donoghue wrote:
> On 23/05/2024 13:59, kernel test robot wrote:
>> Hi Gjorgji,
>>
>> kernel test robot noticed the following build warnings:
>>
>> [auto build test WARNING on media-tree/master]
>> [also build test WARNING on linus/master next-20240523]
>> [cannot apply to v6.9]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>>
>> url:https://github.com/intel-lab-lkp/linux/commits/Gjorgji-Rosikopulos/media-qcom-camss-Add-per-sub-device-type-resources/20240522-235220
>> base:   git://linuxtv.org/media_tree.git master
>> patch
>> link:https://lore.kernel.org/r/20240522154659.510-7-quic_grosikop%40quicinc.com
>> patch subject: [PATCH v4 6/8] media: qcom: camss: Split testgen, RDI
>> and RX for CSID 170
>> config: arm64-defconfig
>> (https://download.01.org/0day-ci/archive/20240523/202405232059.8lLokYw2-lkp@intel.com/config)
>> compiler: aarch64-linux-gcc (GCC) 13.2.0
>> reproduce (this is a W=1 build):
>> (https://download.01.org/0day-ci/archive/20240523/202405232059.8lLokYw2-lkp@intel.com/reproduce)
>>
>> If you fix the issue in a separate patch/commit (i.e. not just a new
>> version of
>> the same patch/commit), kindly add following tags
>> | Reported-by: kernel test robot<lkp@intel.com>
>> |
>> Closes:https://lore.kernel.org/oe-kbuild-all/202405232059.8lLokYw2-lkp@intel.com/
>>
>> All warnings (new ones prefixed by >>):
>>
>>     drivers/media/platform/qcom/camss/camss-csid-gen2.c: In function
>> '__csid_configure_rdi_stream':
>>>> drivers/media/platform/qcom/camss/camss-csid-gen2.c:265:13: warning:
>>>> variable 'phy_sel' set but not used [-Wunused-but-set-variable]
>>       265 |         u32 phy_sel = 0;
>>           |             ^~~~~~~
> 
> Gjorgji.
> 
> This appears to be a dead variable now.
> 
> I don't see a need to respin this series but, could you send a
> supplementary patch to fix this up ?

Yes i will send supplementary patch for fixing this. My mistake for
ignoring this warning...

~Gjorgji


> 
> ---
> bod
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen2.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
index eb5dabe2639a..2d8398a91fc2 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-gen2.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
@@ -176,150 +176,176 @@ 
 #define		TPG_COLOR_BOX_CFG_MODE		0
 #define		TPG_COLOR_BOX_PATTERN_SEL	2
 
-static void __csid_configure_stream(struct csid_device *csid, u8 enable, u8 vc)
+static void __csid_configure_rx(struct csid_device *csid,
+				struct csid_phy_config *phy, int vc)
 {
-	struct csid_testgen_config *tg = &csid->testgen;
-	u32 val;
-	u32 phy_sel = 0;
 	u8 lane_cnt = csid->phy.lane_cnt;
-	/* Source pads matching RDI channels on hardware. Pad 1 -> RDI0, Pad 2 -> RDI1, etc. */
-	struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
-	const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
-								   csid->res->formats->nformats,
-								   input_format->code);
+	int val;
 
 	if (!lane_cnt)
 		lane_cnt = 4;
 
-	if (!tg->enabled)
-		phy_sel = csid->phy.csiphy_id;
+	val = (lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
+	val |= phy->lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
+	val |= phy->csiphy_id << CSI2_RX_CFG0_PHY_NUM_SEL;
+	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0);
 
-	if (enable) {
-		/*
-		 * DT_ID is a two bit bitfield that is concatenated with
-		 * the four least significant bits of the five bit VC
-		 * bitfield to generate an internal CID value.
-		 *
-		 * CSID_RDI_CFG0(vc)
-		 * DT_ID : 28:27
-		 * VC    : 26:22
-		 * DT    : 21:16
-		 *
-		 * CID   : VC 3:0 << 2 | DT_ID 1:0
-		 */
-		u8 dt_id = vc & 0x03;
-
-		if (tg->enabled) {
-			/* configure one DT, infinite frames */
-			val = vc << TPG_VC_CFG0_VC_NUM;
-			val |= INTELEAVING_MODE_ONE_SHOT << TPG_VC_CFG0_LINE_INTERLEAVING_MODE;
-			val |= 0 << TPG_VC_CFG0_NUM_FRAMES;
-			writel_relaxed(val, csid->base + CSID_TPG_VC_CFG0);
-
-			val = 0x740 << TPG_VC_CFG1_H_BLANKING_COUNT;
-			val |= 0x3ff << TPG_VC_CFG1_V_BLANKING_COUNT;
-			writel_relaxed(val, csid->base + CSID_TPG_VC_CFG1);
-
-			writel_relaxed(0x12345678, csid->base + CSID_TPG_LFSR_SEED);
-
-			val = (input_format->height & 0x1fff) << TPG_DT_n_CFG_0_FRAME_HEIGHT;
-			val |= (input_format->width & 0x1fff) << TPG_DT_n_CFG_0_FRAME_WIDTH;
-			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
-
-			val = format->data_type << TPG_DT_n_CFG_1_DATA_TYPE;
-			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
-
-			val = (tg->mode - 1) << TPG_DT_n_CFG_2_PAYLOAD_MODE;
-			val |= 0xBE << TPG_DT_n_CFG_2_USER_SPECIFIED_PAYLOAD;
-			val |= format->decode_format << TPG_DT_n_CFG_2_ENCODE_FORMAT;
-			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_2(0));
-
-			writel_relaxed(0, csid->base + CSID_TPG_COLOR_BARS_CFG);
-
-			writel_relaxed(0, csid->base + CSID_TPG_COLOR_BOX_CFG);
-		}
+	val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN;
+	if (vc > 3)
+		val |= 1 << CSI2_RX_CFG1_VC_MODE;
+	val |= 1 << CSI2_RX_CFG1_MISR_EN;
+	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
+}
 
-		val = 1 << RDI_CFG0_BYTE_CNTR_EN;
-		val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
-		val |= 1 << RDI_CFG0_TIMESTAMP_EN;
-		/* note: for non-RDI path, this should be format->decode_format */
-		val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
-		val |= format->data_type << RDI_CFG0_DATA_TYPE;
-		val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
-		val |= dt_id << RDI_CFG0_DT_ID;
-		writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
+static void __csid_ctrl_rdi(struct csid_device *csid, int enable, u8 rdi)
+{
+	int val;
 
-		/* CSID_TIMESTAMP_STB_POST_IRQ */
-		val = 2 << RDI_CFG1_TIMESTAMP_STB_SEL;
-		writel_relaxed(val, csid->base + CSID_RDI_CFG1(vc));
+	if (enable)
+		val = HALT_CMD_RESUME_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
+	else
+		val = HALT_CMD_HALT_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
+	writel_relaxed(val, csid->base + CSID_RDI_CTRL(rdi));
+}
 
-		val = 1;
-		writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PERIOD(vc));
+static void __csid_configure_testgen(struct csid_device *csid, u8 enable, u8 vc)
+{
+	struct csid_testgen_config *tg = &csid->testgen;
+	struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
+	const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
+								   csid->res->formats->nformats,
+								   input_format->code);
+	u8 lane_cnt = csid->phy.lane_cnt;
+	u32 val;
 
-		val = 0;
-		writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PATTERN(vc));
+	if (!lane_cnt)
+		lane_cnt = 4;
 
-		val = 1;
-		writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(vc));
+	/* configure one DT, infinite frames */
+	val = vc << TPG_VC_CFG0_VC_NUM;
+	val |= INTELEAVING_MODE_ONE_SHOT << TPG_VC_CFG0_LINE_INTERLEAVING_MODE;
+	val |= 0 << TPG_VC_CFG0_NUM_FRAMES;
+	writel_relaxed(val, csid->base + CSID_TPG_VC_CFG0);
 
-		val = 0;
-		writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(vc));
+	val = 0x740 << TPG_VC_CFG1_H_BLANKING_COUNT;
+	val |= 0x3ff << TPG_VC_CFG1_V_BLANKING_COUNT;
+	writel_relaxed(val, csid->base + CSID_TPG_VC_CFG1);
 
-		val = 1;
-		writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PERIOD(vc));
+	writel_relaxed(0x12345678, csid->base + CSID_TPG_LFSR_SEED);
 
-		val = 0;
-		writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PATTERN(vc));
+	val = (input_format->height & 0x1fff) << TPG_DT_n_CFG_0_FRAME_HEIGHT;
+	val |= (input_format->width & 0x1fff) << TPG_DT_n_CFG_0_FRAME_WIDTH;
+	writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
 
-		val = 1;
-		writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PERIOD(vc));
+	val = format->data_type << TPG_DT_n_CFG_1_DATA_TYPE;
+	writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
 
-		val = 0;
-		writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PATTERN(vc));
+	val = (tg->mode - 1) << TPG_DT_n_CFG_2_PAYLOAD_MODE;
+	val |= 0xBE << TPG_DT_n_CFG_2_USER_SPECIFIED_PAYLOAD;
+	val |= format->decode_format << TPG_DT_n_CFG_2_ENCODE_FORMAT;
+	writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_2(0));
 
-		val = 0;
-		writel_relaxed(val, csid->base + CSID_RDI_CTRL(vc));
+	writel_relaxed(0, csid->base + CSID_TPG_COLOR_BARS_CFG);
 
-		val = readl_relaxed(csid->base + CSID_RDI_CFG0(vc));
-		val |=  1 << RDI_CFG0_ENABLE;
-		writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
-	}
+	writel_relaxed(0, csid->base + CSID_TPG_COLOR_BOX_CFG);
 
-	if (tg->enabled) {
-		val = enable << TPG_CTRL_TEST_EN;
-		val |= 1 << TPG_CTRL_FS_PKT_EN;
-		val |= 1 << TPG_CTRL_FE_PKT_EN;
-		val |= (lane_cnt - 1) << TPG_CTRL_NUM_ACTIVE_LANES;
-		val |= 0x64 << TPG_CTRL_CYCLES_BETWEEN_PKTS;
-		val |= 0xA << TPG_CTRL_NUM_TRAIL_BYTES;
-		writel_relaxed(val, csid->base + CSID_TPG_CTRL);
-	}
+	val = enable << TPG_CTRL_TEST_EN;
+	val |= 1 << TPG_CTRL_FS_PKT_EN;
+	val |= 1 << TPG_CTRL_FE_PKT_EN;
+	val |= (lane_cnt - 1) << TPG_CTRL_NUM_ACTIVE_LANES;
+	val |= 0x64 << TPG_CTRL_CYCLES_BETWEEN_PKTS;
+	val |= 0xA << TPG_CTRL_NUM_TRAIL_BYTES;
+	writel_relaxed(val, csid->base + CSID_TPG_CTRL);
+}
 
-	val = (lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
-	val |= csid->phy.lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
-	val |= phy_sel << CSI2_RX_CFG0_PHY_NUM_SEL;
-	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0);
+static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 vc)
+{
+	struct csid_testgen_config *tg = &csid->testgen;
+	u32 val;
+	u32 phy_sel = 0;
+	/* Source pads matching RDI channels on hardware. Pad 1 -> RDI0, Pad 2 -> RDI1, etc. */
+	struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
+	const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
+								   csid->res->formats->nformats,
+								   input_format->code);
 
-	val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN;
-	if (vc > 3)
-		val |= 1 << CSI2_RX_CFG1_VC_MODE;
-	val |= 1 << CSI2_RX_CFG1_MISR_EN;
-	writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
+	if (!tg->enabled)
+		phy_sel = csid->phy.csiphy_id;
 
-	if (enable)
-		val = HALT_CMD_RESUME_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
-	else
-		val = HALT_CMD_HALT_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
+	/*
+	 * DT_ID is a two bit bitfield that is concatenated with
+	 * the four least significant bits of the five bit VC
+	 * bitfield to generate an internal CID value.
+	 *
+	 * CSID_RDI_CFG0(vc)
+	 * DT_ID : 28:27
+	 * VC    : 26:22
+	 * DT    : 21:16
+	 *
+	 * CID   : VC 3:0 << 2 | DT_ID 1:0
+	 */
+	u8 dt_id = vc & 0x03;
+
+	val = 1 << RDI_CFG0_BYTE_CNTR_EN;
+	val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
+	val |= 1 << RDI_CFG0_TIMESTAMP_EN;
+	/* note: for non-RDI path, this should be format->decode_format */
+	val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
+	val |= format->data_type << RDI_CFG0_DATA_TYPE;
+	val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
+	val |= dt_id << RDI_CFG0_DT_ID;
+	writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
+
+	/* CSID_TIMESTAMP_STB_POST_IRQ */
+	val = 2 << RDI_CFG1_TIMESTAMP_STB_SEL;
+	writel_relaxed(val, csid->base + CSID_RDI_CFG1(vc));
+
+	val = 1;
+	writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PERIOD(vc));
+
+	val = 0;
+	writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PATTERN(vc));
+
+	val = 1;
+	writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(vc));
+
+	val = 0;
+	writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(vc));
+
+	val = 1;
+	writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PERIOD(vc));
+
+	val = 0;
+	writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PATTERN(vc));
+
+	val = 1;
+	writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PERIOD(vc));
+
+	val = 0;
+	writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PATTERN(vc));
+
+	val = 0;
 	writel_relaxed(val, csid->base + CSID_RDI_CTRL(vc));
+
+	val = readl_relaxed(csid->base + CSID_RDI_CFG0(vc));
+	val |=  enable << RDI_CFG0_ENABLE;
+	writel_relaxed(val, csid->base + CSID_RDI_CFG0(vc));
 }
 
 static void csid_configure_stream(struct csid_device *csid, u8 enable)
 {
+	struct csid_testgen_config *tg = &csid->testgen;
 	u8 i;
 	/* Loop through all enabled VCs and configure stream for each */
 	for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS; i++)
-		if (csid->phy.en_vc & BIT(i))
-			__csid_configure_stream(csid, enable, i);
+		if (csid->phy.en_vc & BIT(i)) {
+			if (tg->enabled)
+				__csid_configure_testgen(csid, enable, i);
+
+			__csid_configure_rdi_stream(csid, enable, i);
+			__csid_configure_rx(csid, &csid->phy, i);
+			__csid_ctrl_rdi(csid, enable, i);
+		}
 }
 
 static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)