@@ -47,6 +47,12 @@
* Please keep the list sorted by ACPI HID.
*/
static const struct ipu_sensor_config ipu_supported_sensors[] = {
+ /* Himax HM11B1 */
+ IPU_SENSOR_CONFIG("HIMX11B1", 1, 384000000),
+ /* Himax HM2170 */
+ IPU_SENSOR_CONFIG("HIMX2170", 1, 384000000),
+ /* Himax HM2172 */
+ IPU_SENSOR_CONFIG("HIMX2172", 1, 384000000),
/* GalaxyCore GC0310 */
IPU_SENSOR_CONFIG("INT0310", 0),
/* Omnivision OV5693 */
@@ -59,14 +65,24 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
IPU_SENSOR_CONFIG("INT347E", 1, 319200000),
/* Hynix Hi-556 */
IPU_SENSOR_CONFIG("INT3537", 1, 437000000),
- /* Omnivision OV01A10 */
+ /* Omnivision OV01A10 / OV01A1S */
IPU_SENSOR_CONFIG("OVTI01A0", 1, 400000000),
+ IPU_SENSOR_CONFIG("OVTI01AS", 1, 400000000),
+ /* Omnivision OV02C10 */
+ IPU_SENSOR_CONFIG("OVTI02C1", 1, 400000000),
+ /* Omnivision OV02E10 */
+ IPU_SENSOR_CONFIG("OVTI02E1", 1, 360000000),
+ /* Omnivision OV08A10 */
+ IPU_SENSOR_CONFIG("OVTI08A1", 1, 500000000),
+ /* Omnivision OV08x40 */
+ IPU_SENSOR_CONFIG("OVTI08F4", 1, 400000000),
+ /* Omnivision OV13B10 */
+ IPU_SENSOR_CONFIG("OVTI13B1", 1, 560000000),
+ IPU_SENSOR_CONFIG("OVTIDB10", 1, 560000000),
/* Omnivision OV2680 */
IPU_SENSOR_CONFIG("OVTI2680", 1, 331200000),
/* Omnivision OV8856 */
IPU_SENSOR_CONFIG("OVTI8856", 3, 180000000, 360000000, 720000000),
- /* Omnivision OV13B10 */
- IPU_SENSOR_CONFIG("OVTIDB10", 1, 560000000),
};
static const struct ipu_property_names prop_names = {
The out of tree IPU6 driver comes with its own copy of the ipu-bridge code. It also comes bundled with standard v4l2 sensor drivers. Many of these have been mainlined and the rest is being mainlined but not all are upstream yet. The latest version of the out of tree code now will use the mainline kernel ipu-bridge version when build against new enough kernels. This however breaks support for (bundled) sensor drivers which do not (yet) have an entry in the mainline ipu-bridge code. Add the missing entries to the mainline ipu-bridge code to make the transition to having everything in mainline easier. The alternative HID for the OV13B10 and the OV08x40 entries both are for sensors already supported in mainline which were missing. The downside of adding these HIDs is that this will cause the IPU3 / IPU6 drivers to delay registering there /dev/video# nodes until a sensor driver has bound, which for the non mainline drivers may never happen. This is not really an issue because almost all IPU designs only have front (user) facing sensors and all the added HIDs are for the main RGB (not IR) sensor. So if the sensor driver is missing then the user can already not use the camera and adding these HIDs does not really change that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/media/pci/intel/ipu-bridge.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)