| Message ID | 20240813-imx335-binned-mode-v1-1-edbb3718ab0f@ideasonboard.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | media: imx283: Add 3/3 binning mode | expand |
Quoting Umang Jain (2024-08-13 06:52:00) > IMX283 supports 12-bit 3/3 binning mode with 1824x1216 resolution. > Introduce the mode config for the same. > > Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> > --- > Patch to introduce 3/3 binning mode - 1824x1216 12-bit output. > --- > drivers/media/i2c/imx283.c | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/drivers/media/i2c/imx283.c b/drivers/media/i2c/imx283.c > index 8490618c5071..94276f4f2d83 100644 > --- a/drivers/media/i2c/imx283.c > +++ b/drivers/media/i2c/imx283.c > @@ -465,6 +465,39 @@ static const struct imx283_mode supported_modes_12bit[] = { > .horizontal_ob = 48, > .vertical_ob = 4, > > + .crop = { I still wonder if these crops for full resolution mode can be set as: .crop = imx283_active_area, But that's a separate patch/discussion. > + .top = 40, > + .left = 108, > + .width = 5472, > + .height = 3648, > + }, > + }, > + { > + /* > + * Readout mode 3 : 3/3 binned mode (1824x1216) > + */ > + .mode = IMX283_MODE_3, > + .bpp = 12, > + .width = 1824, > + .height = 1216, > + .min_hmax = 1894, /* Pixels (284 * 480MHz/72MHz + padding) */ > + .min_vmax = 4200, /* Lines */ > + > + /* 60.00 fps */ > + .default_hmax = 1900, /* 285 @ 480MHz/72Mhz */ > + .default_vmax = 4200, > + > + .veff = 1234, > + .vst = 0, > + .vct = 0, > + > + .hbin_ratio = 3, > + .vbin_ratio = 3, > + > + .min_shr = 16, > + .horizontal_ob = 32, > + .vertical_ob = 4, > + Everything there matches my expectations and the datasheet: Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > .crop = { > .top = 40, > .left = 108, > > --- > base-commit: 68a72104cbcf38ad16500216e213fa4eb21c4be2 > change-id: 20240813-imx335-binned-mode-98b2b7ee5ba0 > > Best regards, > -- > Umang Jain <umang.jain@ideasonboard.com> >
diff --git a/drivers/media/i2c/imx283.c b/drivers/media/i2c/imx283.c index 8490618c5071..94276f4f2d83 100644 --- a/drivers/media/i2c/imx283.c +++ b/drivers/media/i2c/imx283.c @@ -465,6 +465,39 @@ static const struct imx283_mode supported_modes_12bit[] = { .horizontal_ob = 48, .vertical_ob = 4, + .crop = { + .top = 40, + .left = 108, + .width = 5472, + .height = 3648, + }, + }, + { + /* + * Readout mode 3 : 3/3 binned mode (1824x1216) + */ + .mode = IMX283_MODE_3, + .bpp = 12, + .width = 1824, + .height = 1216, + .min_hmax = 1894, /* Pixels (284 * 480MHz/72MHz + padding) */ + .min_vmax = 4200, /* Lines */ + + /* 60.00 fps */ + .default_hmax = 1900, /* 285 @ 480MHz/72Mhz */ + .default_vmax = 4200, + + .veff = 1234, + .vst = 0, + .vct = 0, + + .hbin_ratio = 3, + .vbin_ratio = 3, + + .min_shr = 16, + .horizontal_ob = 32, + .vertical_ob = 4, + .crop = { .top = 40, .left = 108,
IMX283 supports 12-bit 3/3 binning mode with 1824x1216 resolution. Introduce the mode config for the same. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> --- Patch to introduce 3/3 binning mode - 1824x1216 12-bit output. --- drivers/media/i2c/imx283.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) --- base-commit: 68a72104cbcf38ad16500216e213fa4eb21c4be2 change-id: 20240813-imx335-binned-mode-98b2b7ee5ba0 Best regards,