@@ -35,8 +35,6 @@
#define MEI_CSI_ENTITY_NAME "Intel IVSC CSI"
-#define MEI_CSI_LINK_FREQ_400MHZ 400000000ULL
-
/* the 5s used here is based on experiment */
#define CSI_CMD_TIMEOUT (5 * HZ)
/* to setup CSI-2 link an extra delay needed and determined experimentally */
@@ -121,14 +119,13 @@ struct mei_csi {
struct mutex lock;
struct v4l2_subdev subdev;
- struct v4l2_subdev *remote;
+ struct media_pad *remote;
struct v4l2_async_notifier notifier;
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *freq_ctrl;
struct v4l2_ctrl *privacy_ctrl;
/* lock for v4l2 controls */
struct mutex ctrl_lock;
- unsigned int remote_pad;
/* start streaming or not */
int streaming;
@@ -147,10 +144,6 @@ static const struct v4l2_mbus_framefmt mei_csi_format_mbus_default = {
.field = V4L2_FIELD_NONE,
};
-static s64 link_freq_menu_items[] = {
- MEI_CSI_LINK_FREQ_400MHZ
-};
-
static inline struct mei_csi *notifier_to_csi(struct v4l2_async_notifier *n)
{
return container_of(n, struct mei_csi, notifier);
@@ -286,11 +279,13 @@ static void mei_csi_rx(struct mei_cl_device *cldev)
static int mei_csi_set_stream(struct v4l2_subdev *sd, int enable)
{
struct mei_csi *csi = sd_to_csi(sd);
+ struct v4l2_subdev *remote_sd =
+ media_entity_to_v4l2_subdev(csi->remote->entity);
s64 freq;
int ret;
if (enable && csi->streaming == 0) {
- freq = v4l2_get_link_freq(csi->remote->ctrl_handler, 0, 0);
+ freq = v4l2_get_link_freq(csi->remote, 0, 0);
if (freq < 0) {
dev_err(&csi->cldev->dev,
"error %lld, invalid link_freq\n", freq);
@@ -309,11 +304,11 @@ static int mei_csi_set_stream(struct v4l2_subdev *sd, int enable)
if (ret < 0)
goto err_switch;
- ret = v4l2_subdev_call(csi->remote, video, s_stream, 1);
+ ret = v4l2_subdev_call(remote_sd, video, s_stream, 1);
if (ret)
goto err_switch;
} else if (!enable && csi->streaming == 1) {
- v4l2_subdev_call(csi->remote, video, s_stream, 0);
+ v4l2_subdev_call(remote_sd, video, s_stream, 0);
/* switch CSI-2 link to IVSC */
ret = csi_set_link_owner(csi, CSI_LINK_IVSC);
@@ -470,34 +465,29 @@ static int mei_csi_set_fmt(struct v4l2_subdev *sd,
return 0;
}
-static int mei_csi_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+static int mei_csi_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_config *mbus_config)
{
- struct mei_csi *csi = ctrl_to_csi(ctrl);
+ struct mei_csi *csi = sd_to_csi(sd);
+ unsigned int i;
s64 freq;
- if (ctrl->id == V4L2_CID_LINK_FREQ) {
- if (!csi->remote)
- return -EINVAL;
-
- freq = v4l2_get_link_freq(csi->remote->ctrl_handler, 0, 0);
- if (freq < 0) {
- dev_err(&csi->cldev->dev,
- "error %lld, invalid link_freq\n", freq);
- return -EINVAL;
- }
-
- link_freq_menu_items[0] = freq;
- ctrl->val = 0;
+ mbus_config->type = V4L2_MBUS_CSI2_DPHY;
+ for (i = 0; i < V4L2_MBUS_CSI2_MAX_DATA_LANES; i++)
+ mbus_config->bus.mipi_csi2.data_lanes[i] = i + 1;
+ mbus_config->bus.mipi_csi2.num_data_lanes = csi->nr_of_lanes;
- return 0;
+ freq = v4l2_get_link_freq(csi->remote, 0, 0);
+ if (freq < 0) {
+ dev_err(&csi->cldev->dev,
+ "error %lld, invalid link_freq\n", freq);
+ return -EINVAL;
}
- return -EINVAL;
-}
+ mbus_config->link_freq = csi->link_freq = freq;
-static const struct v4l2_ctrl_ops mei_csi_ctrl_ops = {
- .g_volatile_ctrl = mei_csi_g_volatile_ctrl,
-};
+ return 0;
+}
static const struct v4l2_subdev_video_ops mei_csi_video_ops = {
.s_stream = mei_csi_set_stream,
@@ -506,6 +496,7 @@ static const struct v4l2_subdev_video_ops mei_csi_video_ops = {
static const struct v4l2_subdev_pad_ops mei_csi_pad_ops = {
.get_fmt = v4l2_subdev_get_fmt,
.set_fmt = mei_csi_set_fmt,
+ .get_mbus_config = mei_csi_get_mbus_config,
};
static const struct v4l2_subdev_ops mei_csi_subdev_ops = {
@@ -533,8 +524,7 @@ static int mei_csi_notify_bound(struct v4l2_async_notifier *notifier,
if (pad < 0)
return pad;
- csi->remote = subdev;
- csi->remote_pad = pad;
+ csi->remote = &subdev->entity.pads[pad];
return media_create_pad_link(&subdev->entity, pad,
&csi->subdev.entity, CSI_PAD_SINK,
@@ -558,28 +548,16 @@ static const struct v4l2_async_notifier_operations mei_csi_notify_ops = {
static int mei_csi_init_controls(struct mei_csi *csi)
{
- u32 max;
int ret;
mutex_init(&csi->ctrl_lock);
- ret = v4l2_ctrl_handler_init(&csi->ctrl_handler, 2);
+ ret = v4l2_ctrl_handler_init(&csi->ctrl_handler, 1);
if (ret)
return ret;
csi->ctrl_handler.lock = &csi->ctrl_lock;
- max = ARRAY_SIZE(link_freq_menu_items) - 1;
- csi->freq_ctrl = v4l2_ctrl_new_int_menu(&csi->ctrl_handler,
- &mei_csi_ctrl_ops,
- V4L2_CID_LINK_FREQ,
- max,
- 0,
- link_freq_menu_items);
- if (csi->freq_ctrl)
- csi->freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY |
- V4L2_CTRL_FLAG_VOLATILE;
-
csi->privacy_ctrl = v4l2_ctrl_new_std(&csi->ctrl_handler, NULL,
V4L2_CID_PRIVACY, 0, 1, 1, 0);
if (csi->privacy_ctrl)
Support the use of the media pad for obtaining the link frequency. Similarly, call the v4l2_get_link_freq() on the media pad, not on the remote's control handler. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/pci/intel/ivsc/mei_csi.c | 72 +++++++++----------------- 1 file changed, 25 insertions(+), 47 deletions(-)