@@ -94,6 +94,8 @@ connector/
- docs on the netlink based userspace<->kernel space communication mod.
console/
- documentation on Linux console drivers.
+contiguous-memory.txt
+ - documentation on physically-contiguous memory allocation framework.
cpu-freq/
- info on CPU frequency and voltage scaling.
cpu-hotplug.txt
new file mode 100644
@@ -0,0 +1,544 @@
+ -*- org -*-
+
+* Contiguous Memory Allocator
+
+ The Contiguous Memory Allocator (CMA) is a framework, which allows
+ setting up a machine-specific configuration for physically-contiguous
+ memory management. Memory for devices is then allocated according
+ to that configuration.
+
+ The main role of the framework is not to allocate memory, but to
+ parse and manage memory configurations, as well as to act as an
+ in-between between device drivers and pluggable allocators. It is
+ thus not tied to any memory allocation method or strategy.
+
+** Why is it needed?
+
+ Various devices on embedded systems have no scatter-getter and/or
+ IO map support and as such require contiguous blocks of memory to
+ operate. They include devices such as cameras, hardware video
+ decoders and encoders, etc.
+
+ Such devices often require big memory buffers (a full HD frame is,
+ for instance, more then 2 mega pixels large, i.e. more than 6 MB
+ of memory), which makes mechanisms such as kmalloc() ineffective.
+
+ Some embedded devices impose additional requirements on the
+ buffers, e.g. they can operate only on buffers allocated in
+ particular location/memory bank (if system has more than one
+ memory bank) or buffers aligned to a particular memory boundary.
+
+ Development of embedded devices have seen a big rise recently
+ (especially in the V4L area) and many such drivers include their
+ own memory allocation code. Most of them use bootmem-based methods.
+ CMA framework is an attempt to unify contiguous memory allocation
+ mechanisms and provide a simple API for device drivers, while
+ staying as customisable and modular as possible.
+
+** Design
+
+ The main design goal for the CMA was to provide a customisable and
+ modular framework, which could be configured to suit the needs of
+ individual systems. Configuration specifies a list of memory
+ regions, which then are assigned to devices. Memory regions can
+ be shared among many device drivers or assigned exclusively to
+ one. This has been achieved in the following ways:
+
+ 1. The core of the CMA does not handle allocation of memory and
+ management of free space. Dedicated allocators are used for
+ that purpose.
+
+ This way, if the provided solution does not match demands
+ imposed on a given system, one can develop a new algorithm and
+ easily plug it into the CMA framework.
+
+ The presented solution includes an implementation of a best-fit
+ algorithm.
+
+ 2. When requesting memory, devices have to introduce themselves.
+ This way CMA knows who the memory is allocated for. This
+ allows for the system architect to specify which memory regions
+ each device should use.
+
+ 3. Memory regions are grouped in various "types". When device
+ requests a chunk of memory, it can specify what type of memory
+ it needs. If no type is specified, "common" is assumed.
+
+ This makes it possible to configure the system in such a way,
+ that a single device may get memory from different memory
+ regions, depending on the "type" of memory it requested. For
+ example, a video codec driver might want to allocate some
+ shared buffers from the first memory bank and the other from
+ the second to get the highest possible memory throughput.
+
+ 4. For greater flexibility and extensibility, the framework allows
+ device drivers to register private regions of reserved memory
+ which then may be used only by them.
+
+ As an effect, if a driver would not use the rest of the CMA
+ interface, it can still use CMA allocators and other
+ mechanisms.
+
+ 4a. Early in boot process, device drivers can also request the
+ CMA framework to a reserve a region of memory for them
+ which then will be used as a private region.
+
+ This way, drivers do not need to directly call bootmem,
+ memblock or similar early allocator but merely register an
+ early region and the framework will handle the rest
+ including choosing the right early allocator.
+
+** Use cases
+
+ Let's analyse some imaginary system that uses the CMA to see how
+ the framework can be used and configured.
+
+
+ We have a platform with a hardware video decoder and a camera each
+ needing 20 MiB of memory in the worst case. Our system is written
+ in such a way though that the two devices are never used at the
+ same time and memory for them may be shared. In such a system the
+ following configuration would be used in the platform
+ initialisation code:
+
+ static struct cma_region regions[] = {
+ { .name = "region", .size = 20 << 20 },
+ { }
+ }
+ static const char map[] __initconst = "video,camera=region";
+
+ cma_set_defaults(regions, map);
+
+ The regions array defines a single 20-MiB region named "region".
+ The map says that drivers named "video" and "camera" are to be
+ granted memory from the previously defined region.
+
+ A shorter map can be used as well:
+
+ static const char map[] __initconst = "*=region";
+
+ The asterisk ("*") matches all devices thus all devices will use
+ the region named "region".
+
+ We can see, that because the devices share the same memory region,
+ we save 20 MiB, compared to the situation when each of the devices
+ would reserve 20 MiB of memory for itself.
+
+
+ Now, let's say that we have also many other smaller devices and we
+ want them to share some smaller pool of memory. For instance 5
+ MiB. This can be achieved in the following way:
+
+ static struct cma_region regions[] = {
+ { .name = "region", .size = 20 << 20 },
+ { .name = "common", .size = 5 << 20 },
+ { }
+ }
+ static const char map[] __initconst =
+ "video,camera=region;*=common";
+
+ cma_set_defaults(regions, map);
+
+ This instructs CMA to reserve two regions and let video and camera
+ use region "region" whereas all other devices should use region
+ "common".
+
+
+ Later on, after some development of the system, it can now run
+ video decoder and camera at the same time. The 20 MiB region is
+ no longer enough for the two to share. A quick fix can be made to
+ grant each of those devices separate regions:
+
+ static struct cma_region regions[] = {
+ { .name = "v", .size = 20 << 20 },
+ { .name = "c", .size = 20 << 20 },
+ { .name = "common", .size = 5 << 20 },
+ { }
+ }
+ static const char map[] __initconst = "video=v;camera=c;*=common";
+
+ cma_set_defaults(regions, map);
+
+ This solution also shows how with CMA you can assign private pools
+ of memory to each device if that is required.
+
+
+ Allocation mechanisms can be replaced dynamically in a similar
+ manner as well. Let's say that during testing, it has been
+ discovered that, for a given shared region of 40 MiB,
+ fragmentation has become a problem. It has been observed that,
+ after some time, it becomes impossible to allocate buffers of the
+ required sizes. So to satisfy our requirements, we would have to
+ reserve a larger shared region beforehand.
+
+ But fortunately, you have also managed to develop a new allocation
+ algorithm -- Neat Allocation Algorithm or "na" for short -- which
+ satisfies the needs for both devices even on a 30 MiB region. The
+ configuration can be then quickly changed to:
+
+ static struct cma_region regions[] = {
+ { .name = "region", .size = 30 << 20, .alloc_name = "na" },
+ { .name = "common", .size = 5 << 20 },
+ { }
+ }
+ static const char map[] __initconst = "video,camera=region;*=common";
+
+ cma_set_defaults(regions, map);
+
+ This shows how you can develop your own allocation algorithms if
+ the ones provided with CMA do not suit your needs and easily
+ replace them, without the need to modify CMA core or even
+ recompiling the kernel.
+
+** Technical Details
+
+*** The attributes
+
+ As shown above, CMA is configured by a two attributes: list
+ regions and map. The first one specifies regions that are to be
+ reserved for CMA. The second one specifies what regions each
+ device is assigned to.
+
+**** Regions
+
+ Regions is a list of regions terminated by a region with size
+ equal zero. The following fields may be set:
+
+ - size -- size of the region (required, must not be zero)
+ - alignment -- alignment of the region; must be power of two or
+ zero (optional)
+ - start -- where the region has to start (optional)
+ - alloc_name -- the name of allocator to use (optional)
+ - alloc -- allocator to use (optional; and besides
+ alloc_name is probably is what you want)
+
+ size, alignment and start is specified in bytes. Size will be
+ aligned up to a PAGE_SIZE. If alignment is less then a PAGE_SIZE
+ it will be set to a PAGE_SIZE. start will be aligned to
+ alignment.
+
+**** Map
+
+ The format of the "map" attribute is as follows:
+
+ map-attr ::= [ rules [ ';' ] ]
+ rules ::= rule [ ';' rules ]
+ rule ::= patterns '=' regions
+
+ patterns ::= pattern [ ',' patterns ]
+
+ regions ::= REG-NAME [ ',' regions ]
+ // list of regions to try to allocate memory
+ // from
+
+ pattern ::= dev-pattern [ '/' TYPE-NAME ] | '/' TYPE-NAME
+ // pattern request must match for the rule to
+ // apply; the first rule that matches is
+ // applied; if dev-pattern part is omitted
+ // value identical to the one used in previous
+ // pattern is assumed.
+
+ dev-pattern ::= PATTERN
+ // pattern that device name must match for the
+ // rule to apply; may contain question marks
+ // which mach any characters and end with an
+ // asterisk which match the rest of the string
+ // (including nothing).
+
+ It is a sequence of rules which specify what regions should given
+ (device, type) pair use. The first rule that matches is applied.
+
+ For rule to match, the pattern must match (dev, type) pair.
+ Pattern consist of the part before and after slash. The first
+ part must match device name and the second part must match kind.
+
+ If the first part is empty, the device name is assumed to match
+ iff it matched in previous pattern. If the second part is
+ omitted it will mach any type of memory requested by device.
+
+ Some examples (whitespace added for better readability):
+
+ cma_map = foo/quaz = r1;
+ // device foo with type == "quaz" uses region r1
+
+ foo/* = r2; // OR:
+ /* = r2;
+ // device foo with any other kind uses region r2
+
+ bar = r1,r2;
+ // device bar uses region r1 or r2
+
+ baz?/a , baz?/b = r3;
+ // devices named baz? where ? is any character
+ // with type being "a" or "b" use r3
+
+*** The device and types of memory
+
+ The name of the device is taken from the device structure. It is
+ not possible to use CMA if driver does not register a device
+ (actually this can be overcome if a fake device structure is
+ provided with at least the name set).
+
+ The type of memory is an optional argument provided by the device
+ whenever it requests memory chunk. In many cases this can be
+ ignored but sometimes it may be required for some devices.
+
+ For instance, let's say that there are two memory banks and for
+ performance reasons a device uses buffers in both of them.
+ Platform defines a memory types "a" and "b" for regions in both
+ banks. The device driver would use those two types then to
+ request memory chunks from different banks. CMA attributes could
+ look as follows:
+
+ static struct cma_region regions[] = {
+ { .name = "a", .size = 32 << 20 },
+ { .name = "b", .size = 32 << 20, .start = 512 << 20 },
+ { }
+ }
+ static const char map[] __initconst = "foo/a=a;foo/b=b;*=a,b";
+
+ And whenever the driver allocated the memory it would specify the
+ kind of memory:
+
+ buffer1 = cma_alloc(dev, "a", 1 << 20, 0);
+ buffer2 = cma_alloc(dev, "b", 1 << 20, 0);
+
+ If it was needed to try to allocate from the other bank as well if
+ the dedicated one is full, the map attributes could be changed to:
+
+ static const char map[] __initconst = "foo/a=a,b;foo/b=b,a;*=a,b";
+
+ On the other hand, if the same driver was used on a system with
+ only one bank, the configuration could be changed just to:
+
+ static struct cma_region regions[] = {
+ { .name = "r", .size = 64 << 20 },
+ { }
+ }
+ static const char map[] __initconst = "*=r";
+
+ without the need to change the driver at all.
+
+*** Device API
+
+ There are three basic calls provided by the CMA framework to
+ devices. To allocate a chunk of memory cma_alloc() function needs
+ to be used:
+
+ dma_addr_t cma_alloc(const struct device *dev, const char *type,
+ size_t size, dma_addr_t alignment);
+
+ If required, device may specify alignment in bytes that the chunk
+ need to satisfy. It have to be a power of two or zero. The
+ chunks are always aligned at least to a page.
+
+ The type specifies the type of memory as described to in the
+ previous subsection. If device driver does not care about memory
+ type it can safely pass NULL as the type which is the same as
+ possing "common".
+
+ The basic usage of the function is just a:
+
+ addr = cma_alloc(dev, NULL, size, 0);
+
+ The function returns bus address of allocated chunk or a value
+ that evaluates to true if checked with IS_ERR_VALUE(), so the
+ correct way for checking for errors is:
+
+ unsigned long addr = cma_alloc(dev, size);
+ if (IS_ERR_VALUE(addr))
+ /* Error */
+ return (int)addr;
+ /* Allocated */
+
+ (Make sure to include <linux/err.h> which contains the definition
+ of the IS_ERR_VALUE() macro.)
+
+
+ Allocated chunk is freed via a cma_free() function:
+
+ int cma_free(dma_addr_t addr);
+
+ It takes bus address of the chunk as an argument frees it.
+
+
+ The last function is the cma_info() which returns information
+ about regions assigned to given (dev, type) pair. Its syntax is:
+
+ int cma_info(struct cma_info *info,
+ const struct device *dev,
+ const char *type);
+
+ On successful exit it fills the info structure with lower and
+ upper bound of regions, total size and number of regions assigned
+ to given (dev, type) pair.
+
+**** Dynamic and private regions
+
+ In the basic setup, regions are provided and initialised by
+ platform initialisation code (which usually use
+ cma_set_defaults() for that purpose).
+
+ It is, however, possible to create and add regions dynamically
+ using cma_region_register() function.
+
+ int cma_region_register(struct cma_region *reg);
+
+ The region does not have to have name. If it does not, it won't
+ be accessed via standard mapping (the one provided with map
+ attribute). Such regions are private and to allocate chunk from
+ them, one needs to call:
+
+ dma_addr_t cma_alloc_from_region(struct cma_region *reg,
+ size_t size, dma_addr_t alignment);
+
+ It is just like cma_alloc() expect one specifies what region to
+ allocate memory from. The region must have been registered.
+
+**** Allocating from region specified by name
+
+ If a driver preferred allocating from a region or list of regions
+ it knows name of it can use a different call simmilar to the
+ previous:
+
+ dma_addr_t cma_alloc_from(const char *regions,
+ size_t size, dma_addr_t alignment);
+
+ The first argument is a comma-separated list of regions the
+ driver desires CMA to try and allocate from. The list is
+ terminated by a NUL byte or a semicolon.
+
+ Similarly, there is a call for requesting information about named
+ regions:
+
+ int cma_info_about(struct cma_info *info, const char *regions);
+
+ Generally, it should not be needed to use those interfaces but
+ they are provided nevertheless.
+
+**** Registering early regions
+
+ An early region is a region that is managed by CMA early during
+ boot process. It's platforms responsibility to reserve memory
+ for early regions. Later on, when CMA initialises, early regions
+ with reserved memory are registered as normal regions.
+ Registering an early region may be a way for a device to request
+ a private pool of memory without worrying about actually
+ reserving the memory:
+
+ int cma_early_region_register(struct cma_region *reg);
+
+ This needs to be done quite early on in boot process, before
+ platform traverses the cma_early_regions list to reserve memory.
+
+ When boot process ends, device driver may see whether the region
+ was reserved (by checking reg->reserved flag) and if so, whether
+ it was successfully registered as a normal region (by checking
+ the reg->registered flag). If that is the case, device driver
+ can use normal API calls to use the region.
+
+*** Allocator operations
+
+ Creating an allocator for CMA needs four functions to be
+ implemented.
+
+
+ The first two are used to initialise an allocator for given driver
+ and clean up afterwards:
+
+ int cma_foo_init(struct cma_region *reg);
+ void cma_foo_cleanup(struct cma_region *reg);
+
+ The first is called when allocator is attached to region. When
+ the function is called, the cma_region structure is fully
+ initialised (ie. starting address and size have correct values).
+ As a meter of fact, allocator should never modify the cma_region
+ structure other then the private_data field which it may use to
+ point to it's private data.
+
+ The second call cleans up and frees all resources the allocator
+ has allocated for the region. The function can assume that all
+ chunks allocated form this region have been freed thus the whole
+ region is free.
+
+
+ The two other calls are used for allocating and freeing chunks.
+ They are:
+
+ struct cma_chunk *cma_foo_alloc(struct cma_region *reg,
+ size_t size, dma_addr_t alignment);
+ void cma_foo_free(struct cma_chunk *chunk);
+
+ As names imply the first allocates a chunk and the other frees
+ a chunk of memory. It also manages a cma_chunk object
+ representing the chunk in physical memory.
+
+ Either of those function can assume that they are the only thread
+ accessing the region. Therefore, allocator does not need to worry
+ about concurrency. Moreover, all arguments are guaranteed to be
+ valid (i.e. page aligned size, a power of two alignment no lower
+ the a page size).
+
+
+ When allocator is ready, all that is left is to register it by
+ calling cma_allocator_register() function:
+
+ int cma_allocator_register(struct cma_allocator *alloc);
+
+ The argument is an structure with pointers to the above functions
+ and allocator's name. The whole call may look something like
+ this:
+
+ static struct cma_allocator alloc = {
+ .name = "foo",
+ .init = cma_foo_init,
+ .cleanup = cma_foo_cleanup,
+ .alloc = cma_foo_alloc,
+ .free = cma_foo_free,
+ };
+ return cma_allocator_register(&alloc);
+
+ The name ("foo") will be used when a this particular allocator is
+ requested as an allocator for given region.
+
+*** Integration with platform
+
+ There is one function that needs to be called form platform
+ initialisation code. That is the cma_early_regions_reserve()
+ function:
+
+ void cma_early_regions_reserve(int (*reserve)(struct cma_region *reg));
+
+ It traverses list of all of the early regions provided by platform
+ and registered by drivers and reserves memory for them. The only
+ argument is a callback function used to reserve the region.
+ Passing NULL as the argument is the same as passing
+ cma_early_region_reserve() function which uses bootmem and
+ memblock for allocating.
+
+ Alternatively, platform code could traverse the cma_early_regions
+ list by itself but this should never be necessary.
+
+
+ Platform has also a way of providing default attributes for CMA,
+ cma_set_defaults() function is used for that purpose:
+
+ int cma_set_defaults(struct cma_region *regions, const char *map)
+
+ It needs to be called prior to reserving regions. It let one
+ specify the list of regions defined by platform and the map
+ attribute. The map may point to a string in __initdata. See
+ above in this document for example usage of this function.
+
+** Future work
+
+ In the future, implementation of mechanisms that would allow the
+ free space inside the regions to be used as page cache, filesystem
+ buffers or swap devices is planned. With such mechanisms, the
+ memory would not be wasted when not used.
+
+ Because all allocations and freeing of chunks pass the CMA
+ framework it can follow what parts of the reserved memory are
+ freed and what parts are allocated. Tracking the unused memory
+ would let CMA use it for other purposes such as page cache, I/O
+ buffers, swap, etc.
new file mode 100644
@@ -0,0 +1,432 @@
+#ifndef __LINUX_CMA_H
+#define __LINUX_CMA_H
+
+/*
+ * Contiguous Memory Allocator framework
+ * Copyright (c) 2010 by Samsung Electronics.
+ * Written by Michal Nazarewicz (m.nazarewicz@samsung.com)
+ */
+
+/*
+ * See Documentation/contiguous-memory.txt for details.
+ */
+
+/***************************** Kernel lever API *****************************/
+
+#ifdef __KERNEL__
+
+#include <linux/rbtree.h>
+#include <linux/list.h>
+
+
+struct device;
+struct cma_info;
+
+/*
+ * Don't call it directly, use cma_alloc(), cma_alloc_from() or
+ * cma_alloc_from_region().
+ */
+dma_addr_t __must_check
+__cma_alloc(const struct device *dev, const char *type,
+ size_t size, dma_addr_t alignment);
+
+/* Don't call it directly, use cma_info() or cma_info_about(). */
+int
+__cma_info(struct cma_info *info, const struct device *dev, const char *type);
+
+
+/**
+ * cma_alloc - allocates contiguous chunk of memory.
+ * @dev: The device to perform allocation for.
+ * @type: A type of memory to allocate. Platform may define
+ * several different types of memory and device drivers
+ * can then request chunks of different types. Usually it's
+ * safe to pass NULL here which is the same as passing
+ * "common".
+ * @size: Size of the memory to allocate in bytes.
+ * @alignment: Desired alignment in bytes. Must be a power of two or
+ * zero. If alignment is less then a page size it will be
+ * set to page size. If unsure, pass zero here.
+ *
+ * On error returns a negative error cast to dma_addr_t. Use
+ * IS_ERR_VALUE() to check if returned value is indeed an error.
+ * Otherwise bus address of the chunk is returned.
+ */
+static inline dma_addr_t __must_check
+cma_alloc(const struct device *dev, const char *type,
+ size_t size, dma_addr_t alignment)
+{
+ return dev ? __cma_alloc(dev, type, size, alignment) : -EINVAL;
+}
+
+
+/**
+ * struct cma_info - information about regions returned by cma_info().
+ * @lower_bound: The smallest address that is possible to be
+ * allocated for given (dev, type) pair.
+ * @upper_bound: The one byte after the biggest address that is
+ * possible to be allocated for given (dev, type)
+ * pair.
+ * @total_size: Total size of regions mapped to (dev, type) pair.
+ * @free_size: Total free size in all of the regions mapped to (dev, type)
+ * pair. Because of possible race conditions, it is not
+ * guaranteed that the value will be correct -- it gives only
+ * an approximation.
+ * @count: Number of regions mapped to (dev, type) pair.
+ */
+struct cma_info {
+ dma_addr_t lower_bound, upper_bound;
+ size_t total_size, free_size;
+ unsigned count;
+};
+
+/**
+ * cma_info - queries information about regions.
+ * @info: Pointer to a structure where to save the information.
+ * @dev: The device to query information for.
+ * @type: A type of memory to query information for.
+ * If unsure, pass NULL here which is equal to passing
+ * "common".
+ *
+ * On error returns a negative error, zero otherwise.
+ */
+static inline int
+cma_info(struct cma_info *info, const struct device *dev, const char *type)
+{
+ return dev ? __cma_info(info, dev, type) : -EINVAL;
+}
+
+
+/**
+ * cma_free - frees a chunk of memory.
+ * @addr: Beginning of the chunk.
+ *
+ * Returns -ENOENT if there is no chunk at given location; otherwise
+ * zero. In the former case issues a warning.
+ */
+int cma_free(dma_addr_t addr);
+
+
+
+/****************************** Lower lever API *****************************/
+
+/**
+ * cma_alloc_from - allocates contiguous chunk of memory from named regions.
+ * @regions: Comma separated list of region names. Terminated by NUL
+ * byte or a semicolon.
+ * @size: Size of the memory to allocate in bytes.
+ * @alignment: Desired alignment in bytes. Must be a power of two or
+ * zero. If alignment is less then a page size it will be
+ * set to page size. If unsure, pass zero here.
+ *
+ * On error returns a negative error cast to dma_addr_t. Use
+ * IS_ERR_VALUE() to check if returned value is indeed an error.
+ * Otherwise bus address of the chunk is returned.
+ */
+static inline dma_addr_t __must_check
+cma_alloc_from(const char *regions, size_t size, dma_addr_t alignment)
+{
+ return __cma_alloc(NULL, regions, size, alignment);
+}
+
+/**
+ * cma_info_about - queries information about named regions.
+ * @info: Pointer to a structure where to save the information.
+ * @regions: Comma separated list of region names. Terminated by NUL
+ * byte or a semicolon.
+ *
+ * On error returns a negative error, zero otherwise.
+ */
+static inline int
+cma_info_about(struct cma_info *info, const const char *regions)
+{
+ return __cma_info(info, NULL, regions);
+}
+
+
+
+struct cma_allocator;
+
+/**
+ * struct cma_region - a region reserved for CMA allocations.
+ * @name: Unique name of the region. Read only.
+ * @start: Bus address of the region in bytes. Always aligned at
+ * least to a full page. Read only.
+ * @size: Size of the region in bytes. Multiply of a page size.
+ * Read only.
+ * @free_space: Free space in the region. Read only.
+ * @alignment: Desired alignment of the region in bytes. A power of two,
+ * always at least page size. Early.
+ * @alloc: Allocator used with this region. NULL means allocator is
+ * not attached. Private.
+ * @alloc_name: Allocator name read from cmdline. Private. This may be
+ * different from @alloc->name.
+ * @private_data: Allocator's private data.
+ * @users: Number of chunks allocated in this region.
+ * @list: Entry in list of regions. Private.
+ * @used: Whether region was already used, ie. there was at least
+ * one allocation request for. Private.
+ * @registered: Whether this region has been registered. Read only.
+ * @reserved: Whether this region has been reserved. Early. Read only.
+ * @copy_name: Whether @name and @alloc_name needs to be copied when
+ * this region is converted from early to normal. Early.
+ * Private.
+ * @free_alloc_name: Whether @alloc_name was kmalloced(). Private.
+ *
+ * Regions come in two types: an early region and normal region. The
+ * former can be reserved or not-reserved. Fields marked as "early"
+ * are only meaningful in early regions.
+ *
+ * Early regions are important only during initialisation. The list
+ * of early regions is built from the "cma" command line argument or
+ * platform defaults. Platform initialisation code is responsible for
+ * reserving space for unreserved regions that are placed on
+ * cma_early_regions list.
+ *
+ * Later, during CMA initialisation all reserved regions from the
+ * cma_early_regions list are registered as normal regions and can be
+ * used using standard mechanisms.
+ */
+struct cma_region {
+ const char *name;
+ dma_addr_t start;
+ size_t size;
+ union {
+ size_t free_space; /* Normal region */
+ dma_addr_t alignment; /* Early region */
+ };
+
+ struct cma_allocator *alloc;
+ const char *alloc_name;
+ void *private_data;
+
+ unsigned users;
+ struct list_head list;
+
+ unsigned used:1;
+ unsigned registered:1;
+ unsigned reserved:1;
+ unsigned copy_name:1;
+ unsigned free_alloc_name:1;
+};
+
+
+/**
+ * cma_region_register() - registers a region.
+ * @reg: Region to region.
+ *
+ * Region's start and size must be set.
+ *
+ * If name is set the region will be accessible using normal mechanism
+ * like mapping or cma_alloc_from() function otherwise it will be
+ * a private region and accessible only using the
+ * cma_alloc_from_region() function.
+ *
+ * If alloc is set function will try to initialise given allocator
+ * (and will return error if it failes). Otherwise alloc_name may
+ * point to a name of an allocator to use (if not set, the default
+ * will be used).
+ *
+ * All other fields are ignored and/or overwritten.
+ *
+ * Returns zero or negative error. In particular, -EADDRINUSE if
+ * region overlap with already existing region.
+ */
+int __must_check cma_region_register(struct cma_region *reg);
+
+/**
+ * cma_region_unregister() - unregisters a region.
+ * @reg: Region to unregister.
+ *
+ * Region is unregistered only if there are no chunks allocated for
+ * it. Otherwise, function returns -EBUSY.
+ *
+ * On success returs zero.
+ */
+int __must_check cma_region_unregister(struct cma_region *reg);
+
+
+/**
+ * cma_alloc_from_region() - allocates contiguous chunk of memory from region.
+ * @reg: Region to allocate chunk from.
+ * @size: Size of the memory to allocate in bytes.
+ * @alignment: Desired alignment in bytes. Must be a power of two or
+ * zero. If alignment is less then a page size it will be
+ * set to page size. If unsure, pass zero here.
+ *
+ * On error returns a negative error cast to dma_addr_t. Use
+ * IS_ERR_VALUE() to check if returned value is indeed an error.
+ * Otherwise bus address of the chunk is returned.
+ */
+dma_addr_t __must_check
+cma_alloc_from_region(struct cma_region *reg,
+ size_t size, dma_addr_t alignment);
+
+
+
+/****************************** Allocators API ******************************/
+
+/**
+ * struct cma_chunk - an allocated contiguous chunk of memory.
+ * @start: Bus address in bytes.
+ * @size: Size in bytes.
+ * @free_space: Free space in region in bytes. Read only.
+ * @reg: Region this chunk belongs to.
+ * @by_start: A node in an red-black tree with all chunks sorted by
+ * start address.
+ *
+ * The cma_allocator::alloc() operation need to set only the @start
+ * and @size fields. The rest is handled by the caller (ie. CMA
+ * glue).
+ */
+struct cma_chunk {
+ dma_addr_t start;
+ size_t size;
+
+ struct cma_region *reg;
+ struct rb_node by_start;
+};
+
+
+/**
+ * struct cma_allocator - a CMA allocator.
+ * @name: Allocator's unique name
+ * @init: Initialises an allocator on given region.
+ * @cleanup: Cleans up after init. May assume that there are no chunks
+ * allocated in given region.
+ * @alloc: Allocates a chunk of memory of given size in bytes and
+ * with given alignment. Alignment is a power of
+ * two (thus non-zero) and callback does not need to check it.
+ * May also assume that it is the only call that uses given
+ * region (ie. access to the region is synchronised with
+ * a mutex). This has to allocate the chunk object (it may be
+ * contained in a bigger structure with allocator-specific data.
+ * Required.
+ * @free: Frees allocated chunk. May also assume that it is the only
+ * call that uses given region. This has to free() the chunk
+ * object as well. Required.
+ * @list: Entry in list of allocators. Private.
+ */
+struct cma_allocator {
+ const char *name;
+
+ int (*init)(struct cma_region *reg);
+ void (*cleanup)(struct cma_region *reg);
+ struct cma_chunk *(*alloc)(struct cma_region *reg, size_t size,
+ dma_addr_t alignment);
+ void (*free)(struct cma_chunk *chunk);
+
+ struct list_head list;
+};
+
+
+/**
+ * cma_allocator_register() - Registers an allocator.
+ * @alloc: Allocator to register.
+ *
+ * Adds allocator to the list of allocators managed by CMA.
+ *
+ * All of the fields of cma_allocator structure must be set except for
+ * the optional name and the list's head which will be overriden
+ * anyway.
+ *
+ * Returns zero or negative error code.
+ */
+int cma_allocator_register(struct cma_allocator *alloc);
+
+
+/**************************** Initialisation API ****************************/
+
+/**
+ * cma_set_defaults() - specifies default command line parameters.
+ * @regions: A zero-sized entry terminated list of early regions.
+ * This array must not be placed in __initdata section.
+ * @map: Map attribute.
+ *
+ * This function should be called prior to cma_early_regions_reserve()
+ * and after early parameters have been parsed.
+ *
+ * Returns zero or negative error.
+ */
+int __init cma_set_defaults(struct cma_region *regions, const char *map);
+
+
+/**
+ * cma_early_regions - a list of early regions.
+ *
+ * Platform needs to allocate space for each of the region before
+ * initcalls are executed. If space is reserved, the reserved flag
+ * must be set. Platform initialisation code may choose to use
+ * cma_early_regions_allocate().
+ *
+ * Later, during CMA initialisation all reserved regions from the
+ * cma_early_regions list are registered as normal regions and can be
+ * used using standard mechanisms.
+ */
+extern struct list_head cma_early_regions __initdata;
+
+
+/**
+ * cma_early_region_register() - registers an early region.
+ * @reg: Region to add.
+ *
+ * Region's size, start and alignment must be set (however the last
+ * two can be zero). If name is set the region will be accessible
+ * using normal mechanism like mapping or cma_alloc_from() function
+ * otherwise it will be a private region accessible only using the
+ * cma_alloc_from_region().
+ *
+ * During platform initialisation, space is reserved for early
+ * regions. Later, when CMA initialises, the early regions are
+ * "converted" into normal regions. If cma_region::alloc is set, CMA
+ * will then try to setup given allocator on the region. Failure to
+ * do so will result in the region not being registered even though
+ * the space for it will still be reserved. If cma_region::alloc is
+ * not set, allocator will be attached to the region on first use and
+ * the value of cma_region::alloc_name will be taken into account if
+ * set.
+ *
+ * All other fields are ignored and/or overwritten.
+ *
+ * Returns zero or negative error. No checking if regions overlap is
+ * performed.
+ */
+int __init __must_check cma_early_region_register(struct cma_region *reg);
+
+
+/**
+ * cma_early_region_reserve() - reserves a physically contiguous memory region.
+ * @reg: Early region to reserve memory for.
+ *
+ * If platform supports bootmem this is the first allocator this
+ * function tries to use. If that failes (or bootmem is not
+ * supported) function tries to use memblec if it is available.
+ *
+ * On success sets reg->reserved flag.
+ *
+ * Returns zero or negative error.
+ */
+int __init cma_early_region_reserve(struct cma_region *reg);
+
+/**
+ * cma_early_regions_reserver() - helper function for reserving early regions.
+ * @reserve: Callbac function used to reserve space for region. Needs
+ * to return non-negative if allocation succeeded, negative
+ * error otherwise. NULL means cma_early_region_alloc() will
+ * be used.
+ *
+ * This function traverses the %cma_early_regions list and tries to
+ * reserve memory for each early region. It uses the @reserve
+ * callback function for that purpose. The reserved flag of each
+ * region is updated accordingly.
+ */
+void __init cma_early_regions_reserve(int (*reserve)(struct cma_region *reg));
+
+#else
+
+#define cma_defaults(regions, map) ((int)0)
+#define cma_early_regions_reserve(reserve) do { } while (0)
+
+#endif
+
+#endif
@@ -301,3 +301,37 @@ config NOMMU_INITIAL_TRIM_EXCESS
of 1 says that all excess pages should be trimmed.
See Documentation/nommu-mmap.txt for more information.
+
+
+config CMA
+ bool "Contiguous Memory Allocator framework"
+ # Currently there is only one allocator so force it on
+ select CMA_BEST_FIT
+ help
+ This enables the Contiguous Memory Allocator framework which
+ allows drivers to allocate big physically-contiguous blocks of
+ memory for use with hardware components that do not support I/O
+ map nor scatter-gather.
+
+ If you select this option you will also have to select at least
+ one allocator algorithm below.
+
+ To make use of CMA you need to specify the regions and
+ driver->region mapping on command line when booting the kernel.
+
+config CMA_DEBUG
+ bool "CMA debug messages (DEVELOPEMENT)"
+ depends on CMA
+ help
+ Enable debug messages in CMA code.
+
+config CMA_BEST_FIT
+ bool "CMA best-fit allocator"
+ depends on CMA
+ default y
+ help
+ This is a best-fit algorithm running in O(n log n) time where
+ n is the number of existing holes (which is never greater then
+ the number of allocated regions and usually much smaller). It
+ allocates area from the smallest hole that is big enough for
+ allocation in question.
@@ -47,3 +47,5 @@ obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o
obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
+obj-$(CONFIG_CMA) += cma.o
+obj-$(CONFIG_CMA_BEST_FIT) += cma-best-fit.o
new file mode 100644
@@ -0,0 +1,407 @@
+/*
+ * Contiguous Memory Allocator framework: Best Fit allocator
+ * Copyright (c) 2010 by Samsung Electronics.
+ * Written by Michal Nazarewicz (m.nazarewicz@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License or (at your optional) any later version of the license.
+ */
+
+#define pr_fmt(fmt) "cma: bf: " fmt
+
+#ifdef CONFIG_CMA_DEBUG
+# define DEBUG
+#endif
+
+#include <linux/errno.h> /* Error numbers */
+#include <linux/slab.h> /* kmalloc() */
+
+#include <linux/cma.h> /* CMA structures */
+
+
+/************************* Data Types *************************/
+
+struct cma_bf_item {
+ struct cma_chunk ch;
+ struct rb_node by_size;
+};
+
+struct cma_bf_private {
+ struct rb_root by_start_root;
+ struct rb_root by_size_root;
+};
+
+
+/************************* Prototypes *************************/
+
+/*
+ * Those are only for holes. They must be called whenever hole's
+ * properties change but also whenever chunk becomes a hole or hole
+ * becames a chunk.
+ */
+static void __cma_bf_hole_insert_by_size(struct cma_bf_item *item);
+static void __cma_bf_hole_erase_by_size(struct cma_bf_item *item);
+static int __must_check
+__cma_bf_hole_insert_by_start(struct cma_bf_item *item);
+static void __cma_bf_hole_erase_by_start(struct cma_bf_item *item);
+
+/**
+ * __cma_bf_hole_take - takes a chunk of memory out of a hole.
+ * @hole: hole to take chunk from
+ * @size: chunk's size
+ * @alignment: chunk's starting address alignment (must be power of two)
+ *
+ * Takes a @size bytes large chunk from hole @hole which must be able
+ * to hold the chunk. The "must be able" includes also alignment
+ * constraint.
+ *
+ * Returns allocated item or NULL on error (if kmalloc() failed).
+ */
+static struct cma_bf_item *__must_check
+__cma_bf_hole_take(struct cma_bf_item *hole, size_t size, dma_addr_t alignment);
+
+/**
+ * __cma_bf_hole_merge_maybe - tries to merge hole with neighbours.
+ * @item: hole to try and merge
+ *
+ * Which items are preserved is undefined so you may not rely on it.
+ */
+static void __cma_bf_hole_merge_maybe(struct cma_bf_item *item);
+
+
+/************************* Device API *************************/
+
+int cma_bf_init(struct cma_region *reg)
+{
+ struct cma_bf_private *prv;
+ struct cma_bf_item *item;
+
+ prv = kzalloc(sizeof *prv, GFP_KERNEL);
+ if (unlikely(!prv))
+ return -ENOMEM;
+
+ item = kzalloc(sizeof *item, GFP_KERNEL);
+ if (unlikely(!item)) {
+ kfree(prv);
+ return -ENOMEM;
+ }
+
+ item->ch.start = reg->start;
+ item->ch.size = reg->size;
+ item->ch.reg = reg;
+
+ rb_root_init(&prv->by_start_root, &item->ch.by_start);
+ rb_root_init(&prv->by_size_root, &item->by_size);
+
+ reg->private_data = prv;
+ return 0;
+}
+
+void cma_bf_cleanup(struct cma_region *reg)
+{
+ struct cma_bf_private *prv = reg->private_data;
+ struct cma_bf_item *item =
+ rb_entry(prv->by_size_root.rb_node,
+ struct cma_bf_item, by_size);
+
+ /* We can assume there is only a single hole in the tree. */
+ WARN_ON(item->by_size.rb_left || item->by_size.rb_right ||
+ item->ch.by_start.rb_left || item->ch.by_start.rb_right);
+
+ kfree(item);
+ kfree(prv);
+}
+
+struct cma_chunk *cma_bf_alloc(struct cma_region *reg,
+ size_t size, dma_addr_t alignment)
+{
+ struct cma_bf_private *prv = reg->private_data;
+ struct rb_node *node = prv->by_size_root.rb_node;
+ struct cma_bf_item *item = NULL;
+
+ /* First find hole that is large enough */
+ while (node) {
+ struct cma_bf_item *i =
+ rb_entry(node, struct cma_bf_item, by_size);
+
+ if (i->ch.size < size) {
+ node = node->rb_right;
+ } else if (i->ch.size >= size) {
+ node = node->rb_left;
+ item = i;
+ }
+ }
+ if (!item)
+ return NULL;
+
+ /* Now look for items which can satisfy alignment requirements */
+ for (;;) {
+ dma_addr_t start = ALIGN(item->ch.start, alignment);
+ dma_addr_t end = item->ch.start + item->ch.size;
+ if (start < end && end - start >= size) {
+ item = __cma_bf_hole_take(item, size, alignment);
+ return likely(item) ? &item->ch : NULL;
+ }
+
+ node = rb_next(node);
+ if (!node)
+ return NULL;
+
+ item = rb_entry(node, struct cma_bf_item, by_size);
+ }
+}
+
+void cma_bf_free(struct cma_chunk *chunk)
+{
+ struct cma_bf_item *item = container_of(chunk, struct cma_bf_item, ch);
+
+ /* Add new hole */
+ if (unlikely(__cma_bf_hole_insert_by_start(item))) {
+ /*
+ * We're screwed... Just free the item and forget
+ * about it. Things are broken beyond repair so no
+ * sense in trying to recover.
+ */
+ kfree(item);
+ } else {
+ __cma_bf_hole_insert_by_size(item);
+
+ /* Merge with prev and next sibling */
+ __cma_bf_hole_merge_maybe(item);
+ }
+}
+
+
+/************************* Basic Tree Manipulation *************************/
+
+static void __cma_bf_hole_insert_by_size(struct cma_bf_item *item)
+{
+ struct cma_bf_private *prv = item->ch.reg->private_data;
+ struct rb_node **link = &prv->by_size_root.rb_node, *parent = NULL;
+ const typeof(item->ch.size) value = item->ch.size;
+
+ while (*link) {
+ struct cma_bf_item *i;
+ parent = *link;
+ i = rb_entry(parent, struct cma_bf_item, by_size);
+ link = value <= i->ch.size
+ ? &parent->rb_left
+ : &parent->rb_right;
+ }
+
+ rb_link_node(&item->by_size, parent, link);
+ rb_insert_color(&item->by_size, &prv->by_size_root);
+}
+
+static void __cma_bf_hole_erase_by_size(struct cma_bf_item *item)
+{
+ struct cma_bf_private *prv = item->ch.reg->private_data;
+ rb_erase(&item->by_size, &prv->by_size_root);
+}
+
+static int __must_check
+__cma_bf_hole_insert_by_start(struct cma_bf_item *item)
+{
+ struct cma_bf_private *prv = item->ch.reg->private_data;
+ struct rb_node **link = &prv->by_start_root.rb_node, *parent = NULL;
+ const typeof(item->ch.start) value = item->ch.start;
+
+ while (*link) {
+ struct cma_bf_item *i;
+ parent = *link;
+ i = rb_entry(parent, struct cma_bf_item, ch.by_start);
+
+ if (WARN_ON(value == i->ch.start))
+ /*
+ * This should *never* happen. And I mean
+ * *never*. We could even BUG on it but
+ * hopefully things are only a bit broken,
+ * ie. system can still run. We produce
+ * a warning and return an error.
+ */
+ return -EBUSY;
+
+ link = value <= i->ch.start
+ ? &parent->rb_left
+ : &parent->rb_right;
+ }
+
+ rb_link_node(&item->ch.by_start, parent, link);
+ rb_insert_color(&item->ch.by_start, &prv->by_start_root);
+ return 0;
+}
+
+static void __cma_bf_hole_erase_by_start(struct cma_bf_item *item)
+{
+ struct cma_bf_private *prv = item->ch.reg->private_data;
+ rb_erase(&item->ch.by_start, &prv->by_start_root);
+}
+
+
+/************************* More Tree Manipulation *************************/
+
+static struct cma_bf_item *__must_check
+__cma_bf_hole_take(struct cma_bf_item *hole, size_t size, size_t alignment)
+{
+ struct cma_bf_item *item;
+
+ /*
+ * There are three cases:
+ * 1. the chunk takes the whole hole,
+ * 2. the chunk is at the beginning or at the end of the hole, or
+ * 3. the chunk is in the middle of the hole.
+ */
+
+
+ /* Case 1, the whole hole */
+ if (size == hole->ch.size) {
+ __cma_bf_hole_erase_by_size(hole);
+ __cma_bf_hole_erase_by_start(hole);
+ return hole;
+ }
+
+
+ /* Allocate */
+ item = kmalloc(sizeof *item, GFP_KERNEL);
+ if (unlikely(!item))
+ return NULL;
+
+ item->ch.start = ALIGN(hole->ch.start, alignment);
+ item->ch.size = size;
+
+ /* Case 3, in the middle */
+ if (item->ch.start != hole->ch.start
+ && item->ch.start + item->ch.size !=
+ hole->ch.start + hole->ch.size) {
+ struct cma_bf_item *tail;
+
+ /*
+ * Space between the end of the chunk and the end of
+ * the region, ie. space left after the end of the
+ * chunk. If this is dividable by alignment we can
+ * move the chunk to the end of the hole.
+ */
+ size_t left =
+ hole->ch.start + hole->ch.size -
+ (item->ch.start + item->ch.size);
+ if (left % alignment == 0) {
+ item->ch.start += left;
+ goto case_2;
+ }
+
+ /*
+ * We are going to add a hole at the end. This way,
+ * we will reduce the problem to case 2 -- the chunk
+ * will be at the end of the hole.
+ */
+ tail = kmalloc(sizeof *tail, GFP_KERNEL);
+ if (unlikely(!tail)) {
+ kfree(item);
+ return NULL;
+ }
+
+ tail->ch.start = item->ch.start + item->ch.size;
+ tail->ch.size =
+ hole->ch.start + hole->ch.size - tail->ch.start;
+ tail->ch.reg = hole->ch.reg;
+
+ if (unlikely(__cma_bf_hole_insert_by_start(tail))) {
+ /*
+ * Things are broken beyond repair... Abort
+ * inserting the hole but still continue with
+ * allocation (seems like the best we can do).
+ */
+
+ hole->ch.size = tail->ch.start - hole->ch.start;
+ kfree(tail);
+ } else {
+ __cma_bf_hole_insert_by_size(tail);
+ /*
+ * It's important that we first insert the new
+ * hole in the tree sorted by size and later
+ * reduce the size of the old hole. We will
+ * update the position of the old hole in the
+ * rb tree in code that handles case 2.
+ */
+ hole->ch.size = tail->ch.start - hole->ch.start;
+ }
+
+ /* Go to case 2 */
+ }
+
+
+ /* Case 2, at the beginning or at the end */
+case_2:
+ /* No need to update the tree; order preserved. */
+ if (item->ch.start == hole->ch.start)
+ hole->ch.start += item->ch.size;
+
+ /* Alter hole's size */
+ hole->ch.size -= size;
+ __cma_bf_hole_erase_by_size(hole);
+ __cma_bf_hole_insert_by_size(hole);
+
+ return item;
+}
+
+
+static void __cma_bf_hole_merge_maybe(struct cma_bf_item *item)
+{
+ struct cma_bf_item *prev;
+ struct rb_node *node;
+ int twice = 2;
+
+ node = rb_prev(&item->ch.by_start);
+ if (unlikely(!node))
+ goto next;
+ prev = rb_entry(node, struct cma_bf_item, ch.by_start);
+
+ for (;;) {
+ if (prev->ch.start + prev->ch.size == item->ch.start) {
+ /* Remove previous hole from trees */
+ __cma_bf_hole_erase_by_size(prev);
+ __cma_bf_hole_erase_by_start(prev);
+
+ /* Alter this hole */
+ item->ch.size += prev->ch.size;
+ item->ch.start = prev->ch.start;
+ __cma_bf_hole_erase_by_size(item);
+ __cma_bf_hole_insert_by_size(item);
+ /*
+ * No need to update by start trees as we do
+ * not break sequence order
+ */
+
+ /* Free prev hole */
+ kfree(prev);
+ }
+
+next:
+ if (!--twice)
+ break;
+
+ node = rb_next(&item->ch.by_start);
+ if (unlikely(!node))
+ break;
+ prev = item;
+ item = rb_entry(node, struct cma_bf_item, ch.by_start);
+ }
+}
+
+
+
+/************************* Register *************************/
+static int cma_bf_module_init(void)
+{
+ static struct cma_allocator alloc = {
+ .name = "bf",
+ .init = cma_bf_init,
+ .cleanup = cma_bf_cleanup,
+ .alloc = cma_bf_alloc,
+ .free = cma_bf_free,
+ };
+ return cma_allocator_register(&alloc);
+}
+module_init(cma_bf_module_init);
new file mode 100644
@@ -0,0 +1,911 @@
+/*
+ * Contiguous Memory Allocator framework
+ * Copyright (c) 2010 by Samsung Electronics.
+ * Written by Michal Nazarewicz (m.nazarewicz@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License or (at your optional) any later version of the license.
+ */
+
+/*
+ * See Documentation/contiguous-memory.txt for details.
+ */
+
+#define pr_fmt(fmt) "cma: " fmt
+
+#ifdef CONFIG_CMA_DEBUG
+# define DEBUG
+#endif
+
+#ifndef CONFIG_NO_BOOTMEM
+# include <linux/bootmem.h> /* alloc_bootmem_pages_nopanic() */
+#endif
+#ifdef CONFIG_HAVE_MEMBLOCK
+# include <linux/memblock.h> /* memblock*() */
+#endif
+#include <linux/device.h> /* struct device, dev_name() */
+#include <linux/errno.h> /* Error numbers */
+#include <linux/err.h> /* IS_ERR, PTR_ERR, etc. */
+#include <linux/mm.h> /* PAGE_ALIGN() */
+#include <linux/module.h> /* EXPORT_SYMBOL_GPL() */
+#include <linux/mutex.h> /* mutex */
+#include <linux/slab.h> /* kmalloc() */
+#include <linux/string.h> /* str*() */
+
+#include <linux/cma.h>
+
+
+/*
+ * Protects cma_regions, cma_allocators, cma_map, cma_map_length, and
+ * cma_chunks_by_start.
+ */
+static DEFINE_MUTEX(cma_mutex);
+
+
+
+/************************* Map attribute *************************/
+
+static const char *cma_map;
+static size_t cma_map_length;
+
+/*
+ * map-attr ::= [ rules [ ';' ] ]
+ * rules ::= rule [ ';' rules ]
+ * rule ::= patterns '=' regions
+ * patterns ::= pattern [ ',' patterns ]
+ * regions ::= REG-NAME [ ',' regions ]
+ * pattern ::= dev-pattern [ '/' TYPE-NAME ] | '/' TYPE-NAME
+ *
+ * See Documentation/contiguous-memory.txt for details.
+ */
+static ssize_t cma_map_validate(const char *param)
+{
+ const char *ch = param;
+
+ if (*ch == '\0' || *ch == '\n')
+ return 0;
+
+ for (;;) {
+ const char *start = ch;
+
+ while (*ch && *ch != '\n' && *ch != ';' && *ch != '=')
+ ++ch;
+
+ if (*ch != '=' || start == ch) {
+ pr_err("map: expecting \"<patterns>=<regions>\" near %s\n",
+ start);
+ return -EINVAL;
+ }
+
+ while (*++ch != ';')
+ if (*ch == '\0' || *ch == '\n')
+ return ch - param;
+ if (ch[1] == '\0' || ch[1] == '\n')
+ return ch - param;
+ ++ch;
+ }
+}
+
+static int __init cma_map_param(char *param)
+{
+ ssize_t len;
+
+ pr_debug("param: map: %s\n", param);
+
+ len = cma_map_validate(param);
+ if (len < 0)
+ return len;
+
+ cma_map = param;
+ cma_map_length = len;
+ return 0;
+}
+
+
+
+/************************* Early regions *************************/
+
+struct list_head cma_early_regions __initdata =
+ LIST_HEAD_INIT(cma_early_regions);
+
+
+int __init __must_check cma_early_region_register(struct cma_region *reg)
+{
+ dma_addr_t start, alignment;
+ size_t size;
+
+ if (reg->alignment & (reg->alignment - 1))
+ return -EINVAL;
+
+ alignment = max(reg->alignment, (dma_addr_t)PAGE_SIZE);
+ start = ALIGN(reg->start, alignment);
+ size = PAGE_ALIGN(reg->size);
+
+ if (start + size < start)
+ return -EINVAL;
+
+ reg->size = size;
+ reg->start = start;
+ reg->alignment = alignment;
+
+ list_add_tail(®->list, &cma_early_regions);
+
+ pr_debug("param: registering early region %s (%p@%p/%p)\n",
+ reg->name, (void *)reg->size, (void *)reg->start,
+ (void *)reg->alignment);
+
+ return 0;
+}
+
+
+
+/************************* Regions & Allocators *************************/
+
+static int __cma_region_attach_alloc(struct cma_region *reg);
+
+/* List of all regions. Named regions are kept before unnamed. */
+static LIST_HEAD(cma_regions);
+
+#define cma_foreach_region(reg) \
+ list_for_each_entry(reg, &cma_regions, list)
+
+int __must_check cma_region_register(struct cma_region *reg)
+{
+ const char *name, *alloc_name;
+ struct cma_region *r;
+ char *ch = NULL;
+ int ret = 0;
+
+ if (!reg->size || reg->start + reg->size < reg->start)
+ return -EINVAL;
+
+ reg->users = 0;
+ reg->used = 0;
+ reg->private_data = NULL;
+ reg->registered = 0;
+ reg->free_space = reg->size;
+
+ /* Copy name and alloc_name */
+ name = reg->name;
+ alloc_name = reg->alloc_name;
+ if (reg->copy_name && (reg->name || reg->alloc_name)) {
+ size_t name_size, alloc_size;
+
+ name_size = reg->name ? strlen(reg->name) + 1 : 0;
+ alloc_size = reg->alloc_name ? strlen(reg->alloc_name) + 1 : 0;
+
+ ch = kmalloc(name_size + alloc_size, GFP_KERNEL);
+ if (!ch) {
+ pr_err("%s: not enough memory to allocate name\n",
+ reg->name ?: "(private)");
+ return -ENOMEM;
+ }
+
+ if (name_size) {
+ memcpy(ch, reg->name, name_size);
+ name = ch;
+ ch += name_size;
+ }
+
+ if (alloc_size) {
+ memcpy(ch, reg->alloc_name, alloc_size);
+ alloc_name = ch;
+ }
+ }
+
+ mutex_lock(&cma_mutex);
+
+ /* Don't let regions overlap */
+ cma_foreach_region(r)
+ if (r->start + r->size > reg->start &&
+ r->start < reg->start + reg->size) {
+ ret = -EADDRINUSE;
+ goto done;
+ }
+
+ if (reg->alloc) {
+ ret = __cma_region_attach_alloc(reg);
+ if (unlikely(ret < 0))
+ goto done;
+ }
+
+ reg->name = name;
+ reg->alloc_name = alloc_name;
+ reg->registered = 1;
+ ch = NULL;
+
+ /*
+ * Keep named at the beginning and unnamed (private) at the
+ * end. This helps in traversal when named region is looked
+ * for.
+ */
+ if (name)
+ list_add(®->list, &cma_regions);
+ else
+ list_add_tail(®->list, &cma_regions);
+
+done:
+ mutex_unlock(&cma_mutex);
+
+ pr_debug("%s: region %sregistered\n",
+ reg->name ?: "(private)", ret ? "not " : "");
+ kfree(ch);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cma_region_register);
+
+static struct cma_region *__must_check
+__cma_region_find(const char **namep)
+{
+ struct cma_region *reg;
+ const char *ch, *name;
+ size_t n;
+
+ ch = *namep;
+ while (*ch && *ch != ',' && *ch != ';')
+ ++ch;
+ name = *namep;
+ *namep = *ch == ',' ? ch + 1 : ch;
+ n = ch - name;
+
+ /*
+ * Named regions are kept in front of unnamed so if we
+ * encounter unnamed region we can stop.
+ */
+ cma_foreach_region(reg)
+ if (!reg->name)
+ break;
+ else if (!strncmp(name, reg->name, n) && !reg->name[n])
+ return reg;
+
+ return NULL;
+}
+
+
+/* List of all allocators. */
+static LIST_HEAD(cma_allocators);
+
+#define cma_foreach_allocator(alloc) \
+ list_for_each_entry(alloc, &cma_allocators, list)
+
+int cma_allocator_register(struct cma_allocator *alloc)
+{
+ struct cma_region *reg;
+ int first;
+
+ if (!alloc->alloc || !alloc->free)
+ return -EINVAL;
+
+ /* alloc->users = 0; */
+
+ mutex_lock(&cma_mutex);
+
+ first = list_empty(&cma_allocators);
+
+ list_add_tail(&alloc->list, &cma_allocators);
+
+ /*
+ * Attach this allocator to all allocator-less regions that
+ * request this particular allocator (reg->alloc_name equals
+ * alloc->name) or if region wants the first available
+ * allocator and we are the first.
+ */
+ cma_foreach_region(reg) {
+ if (reg->alloc)
+ continue;
+ if (reg->alloc_name
+ ? alloc->name && !strcmp(alloc->name, reg->alloc_name)
+ : (!reg->used && first))
+ continue;
+
+ reg->alloc = alloc;
+ __cma_region_attach_alloc(reg);
+ }
+
+ mutex_unlock(&cma_mutex);
+
+ pr_debug("%s: allocator registered\n", alloc->name ?: "(unnamed)");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cma_allocator_register);
+
+static struct cma_allocator *__must_check
+__cma_allocator_find(const char *name)
+{
+ struct cma_allocator *alloc;
+
+ if (!name)
+ return list_empty(&cma_allocators)
+ ? NULL
+ : list_entry(cma_allocators.next,
+ struct cma_allocator, list);
+
+ cma_foreach_allocator(alloc)
+ if (alloc->name && !strcmp(name, alloc->name))
+ return alloc;
+
+ return NULL;
+}
+
+
+
+/************************* Initialise CMA *************************/
+
+int __init cma_set_defaults(struct cma_region *regions, const char *map)
+{
+ if (map) {
+ int ret = cma_map_param((char *)map);
+ if (unlikely(ret < 0))
+ return ret;
+ }
+
+ if (!regions)
+ return 0;
+
+ for (; regions->size; ++regions) {
+ int ret = cma_early_region_register(regions);
+ if (unlikely(ret < 0))
+ return ret;
+ }
+
+ return 0;
+}
+
+
+int __init cma_early_region_reserve(struct cma_region *reg)
+{
+ int tried = 0;
+
+ if (!reg->size || (reg->alignment & (reg->alignment - 1)) ||
+ reg->reserved)
+ return -EINVAL;
+
+#ifndef CONFIG_NO_BOOTMEM
+
+ tried = 1;
+
+ {
+ void *ptr = __alloc_bootmem_nopanic(reg->size, reg->alignment,
+ reg->start);
+ if (ptr) {
+ reg->start = virt_to_phys(ptr);
+ reg->reserved = 1;
+ return 0;
+ }
+ }
+
+#endif
+
+#ifdef CONFIG_HAVE_MEMBLOCK
+
+ tried = 1;
+
+ if (reg->start) {
+ if (memblock_is_region_reserved(reg->start, reg->size) < 0 &&
+ memblock_reserve(reg->start, reg->size) >= 0) {
+ reg->reserved = 1;
+ return 0;
+ }
+ } else {
+ /*
+ * Use __memblock_alloc_base() since
+ * memblock_alloc_base() panic()s.
+ */
+ u64 ret = __memblock_alloc_base(reg->size, reg->alignment, 0);
+ if (ret &&
+ ret < ~(dma_addr_t)0 &&
+ ret + reg->size < ~(dma_addr_t)0 &&
+ ret + reg->size > ret) {
+ reg->start = ret;
+ reg->reserved = 1;
+ return 0;
+ }
+
+ if (ret)
+ memblock_free(ret, reg->size);
+ }
+
+#endif
+
+ return tried ? -ENOMEM : -EOPNOTSUPP;
+}
+
+void __init cma_early_regions_reserve(int (*reserve)(struct cma_region *reg))
+{
+ struct cma_region *reg;
+
+ pr_debug("init: reserving early regions\n");
+
+ if (!reserve)
+ reserve = cma_early_region_reserve;
+
+ list_for_each_entry(reg, &cma_early_regions, list) {
+ if (reg->reserved) {
+ /* nothing */
+ } else if (reserve(reg) >= 0) {
+ pr_debug("init: %s: reserved %p@%p\n",
+ reg->name ?: "(private)",
+ (void *)reg->size, (void *)reg->start);
+ reg->reserved = 1;
+ } else {
+ pr_warn("init: %s: unable to reserve %p@%p/%p\n",
+ reg->name ?: "(private)",
+ (void *)reg->size, (void *)reg->start,
+ (void *)reg->alignment);
+ }
+ }
+}
+
+
+static int __init cma_init(void)
+{
+ struct cma_region *reg, *n;
+
+ pr_debug("init: initialising\n");
+
+ if (cma_map) {
+ char *val = kmemdup(cma_map, cma_map_length + 1, GFP_KERNEL);
+ cma_map = val;
+ if (!val)
+ return -ENOMEM;
+ val[cma_map_length] = '\0';
+ }
+
+ list_for_each_entry_safe(reg, n, &cma_early_regions, list) {
+ INIT_LIST_HEAD(®->list);
+ /*
+ * We don't care if there was an error. It's a pity
+ * but there's not much we can do about it any way.
+ * If the error is on a region that was parsed from
+ * command line then it will stay and waste a bit of
+ * space; if it was registered using
+ * cma_early_region_register() it's caller's
+ * responsibility to do something about it.
+ */
+ if (reg->reserved && cma_region_register(reg) < 0)
+ /* ignore error */;
+ }
+
+ INIT_LIST_HEAD(&cma_early_regions);
+
+ return 0;
+}
+/*
+ * We want to be initialised earlier than module_init/__initcall so
+ * that drivers that want to grab memory at boot time will get CMA
+ * ready. subsys_initcall() seems early enough and not too early at
+ * the same time.
+ */
+subsys_initcall(cma_init);
+
+
+
+/************************* Chunks *************************/
+
+/* All chunks sorted by start address. */
+static struct rb_root cma_chunks_by_start;
+
+static struct cma_chunk *__must_check __cma_chunk_find(dma_addr_t addr)
+{
+ struct cma_chunk *chunk;
+ struct rb_node *n;
+
+ for (n = cma_chunks_by_start.rb_node; n; ) {
+ chunk = rb_entry(n, struct cma_chunk, by_start);
+ if (addr < chunk->start)
+ n = n->rb_left;
+ else if (addr > chunk->start)
+ n = n->rb_right;
+ else
+ return chunk;
+ }
+ WARN(1, KERN_WARNING "no chunk starting at %p\n", (void *)addr);
+ return NULL;
+}
+
+static int __must_check __cma_chunk_insert(struct cma_chunk *chunk)
+{
+ struct rb_node **new, *parent = NULL;
+ typeof(chunk->start) addr = chunk->start;
+
+ for (new = &cma_chunks_by_start.rb_node; *new; ) {
+ struct cma_chunk *c =
+ container_of(*new, struct cma_chunk, by_start);
+
+ parent = *new;
+ if (addr < c->start) {
+ new = &(*new)->rb_left;
+ } else if (addr > c->start) {
+ new = &(*new)->rb_right;
+ } else {
+ /*
+ * We should never be here. If we are it
+ * means allocator gave us an invalid chunk
+ * (one that has already been allocated) so we
+ * refuse to accept it. Our caller will
+ * recover by freeing the chunk.
+ */
+ WARN_ON(1);
+ return -EADDRINUSE;
+ }
+ }
+
+ rb_link_node(&chunk->by_start, parent, new);
+ rb_insert_color(&chunk->by_start, &cma_chunks_by_start);
+
+ return 0;
+}
+
+static void __cma_chunk_free(struct cma_chunk *chunk)
+{
+ rb_erase(&chunk->by_start, &cma_chunks_by_start);
+
+ chunk->reg->alloc->free(chunk);
+ --chunk->reg->users;
+ chunk->reg->free_space += chunk->size;
+}
+
+
+/************************* The Device API *************************/
+
+static const char *__must_check
+__cma_where_from(const struct device *dev, const char *type);
+
+
+/* Allocate. */
+
+static dma_addr_t __must_check
+__cma_alloc_from_region(struct cma_region *reg,
+ size_t size, dma_addr_t alignment)
+{
+ struct cma_chunk *chunk;
+
+ pr_debug("allocate %p/%p from %s\n",
+ (void *)size, (void *)alignment,
+ reg ? reg->name ?: "(private)" : "(null)");
+
+ if (!reg || reg->free_space < size)
+ return -ENOMEM;
+
+ if (!reg->alloc) {
+ if (!reg->used)
+ __cma_region_attach_alloc(reg);
+ if (!reg->alloc)
+ return -ENOMEM;
+ }
+
+ chunk = reg->alloc->alloc(reg, size, alignment);
+ if (!chunk)
+ return -ENOMEM;
+
+ if (unlikely(__cma_chunk_insert(chunk) < 0)) {
+ /* We should *never* be here. */
+ chunk->reg->alloc->free(chunk);
+ kfree(chunk);
+ return -EADDRINUSE;
+ }
+
+ chunk->reg = reg;
+ ++reg->users;
+ reg->free_space -= chunk->size;
+ pr_debug("allocated at %p\n", (void *)chunk->start);
+ return chunk->start;
+}
+
+dma_addr_t __must_check
+cma_alloc_from_region(struct cma_region *reg,
+ size_t size, dma_addr_t alignment)
+{
+ dma_addr_t addr;
+
+ pr_debug("allocate %p/%p from %s\n",
+ (void *)size, (void *)alignment,
+ reg ? reg->name ?: "(private)" : "(null)");
+
+ if (!size || alignment & (alignment - 1) || !reg)
+ return -EINVAL;
+
+ mutex_lock(&cma_mutex);
+
+ addr = reg->registered ?
+ __cma_alloc_from_region(reg, PAGE_ALIGN(size),
+ max(alignment, (dma_addr_t)PAGE_SIZE)) :
+ -EINVAL;
+
+ mutex_unlock(&cma_mutex);
+
+ return addr;
+}
+EXPORT_SYMBOL_GPL(cma_alloc_from_region);
+
+dma_addr_t __must_check
+__cma_alloc(const struct device *dev, const char *type,
+ dma_addr_t size, dma_addr_t alignment)
+{
+ struct cma_region *reg;
+ const char *from;
+ dma_addr_t addr;
+
+ if (dev)
+ pr_debug("allocate %p/%p for %s/%s\n",
+ (void *)size, (void *)alignment,
+ dev_name(dev), type ?: "");
+
+ if (!size || alignment & (alignment - 1))
+ return -EINVAL;
+
+ size = PAGE_ALIGN(size);
+ if (alignment < PAGE_SIZE)
+ alignment = PAGE_SIZE;
+
+ mutex_lock(&cma_mutex);
+
+ from = __cma_where_from(dev, type);
+ if (unlikely(IS_ERR(from))) {
+ addr = PTR_ERR(from);
+ goto done;
+ }
+
+ pr_debug("allocate %p/%p from one of %s\n",
+ (void *)size, (void *)alignment, from);
+
+ while (*from && *from != ';') {
+ reg = __cma_region_find(&from);
+ addr = __cma_alloc_from_region(reg, size, alignment);
+ if (!IS_ERR_VALUE(addr))
+ goto done;
+ }
+
+ pr_debug("not enough memory\n");
+ addr = -ENOMEM;
+
+done:
+ mutex_unlock(&cma_mutex);
+
+ return addr;
+}
+EXPORT_SYMBOL_GPL(__cma_alloc);
+
+
+/* Query information about regions. */
+static void __cma_info_add(struct cma_info *infop, struct cma_region *reg)
+{
+ infop->total_size += reg->size;
+ infop->free_size += reg->free_space;
+ if (infop->lower_bound > reg->start)
+ infop->lower_bound = reg->start;
+ if (infop->upper_bound < reg->start + reg->size)
+ infop->upper_bound = reg->start + reg->size;
+ ++infop->count;
+}
+
+int
+__cma_info(struct cma_info *infop, const struct device *dev, const char *type)
+{
+ struct cma_info info = { ~(dma_addr_t)0, 0, 0, 0, 0 };
+ struct cma_region *reg;
+ const char *from;
+ int ret;
+
+ if (unlikely(!infop))
+ return -EINVAL;
+
+ mutex_lock(&cma_mutex);
+
+ from = __cma_where_from(dev, type);
+ if (IS_ERR(from)) {
+ ret = PTR_ERR(from);
+ info.lower_bound = 0;
+ goto done;
+ }
+
+ while (*from && *from != ';') {
+ reg = __cma_region_find(&from);
+ if (reg)
+ __cma_info_add(&info, reg);
+ }
+
+ ret = 0;
+done:
+ mutex_unlock(&cma_mutex);
+
+ memcpy(infop, &info, sizeof info);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(__cma_info);
+
+
+/* Freeing. */
+int cma_free(dma_addr_t addr)
+{
+ struct cma_chunk *c;
+ int ret;
+
+ mutex_lock(&cma_mutex);
+
+ c = __cma_chunk_find(addr);
+
+ if (c) {
+ __cma_chunk_free(c);
+ ret = 0;
+ } else {
+ ret = -ENOENT;
+ }
+
+ mutex_unlock(&cma_mutex);
+
+ pr_debug("free(%p): %s\n", (void *)addr, c ? "freed" : "not found");
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cma_free);
+
+
+/************************* Miscellaneous *************************/
+
+static int __cma_region_attach_alloc(struct cma_region *reg)
+{
+ struct cma_allocator *alloc;
+ int ret;
+
+ /*
+ * If reg->alloc is set then caller wants us to use this
+ * allocator. Otherwise we need to find one by name.
+ */
+ if (reg->alloc) {
+ alloc = reg->alloc;
+ } else {
+ alloc = __cma_allocator_find(reg->alloc_name);
+ if (!alloc) {
+ pr_warn("init: %s: %s: no such allocator\n",
+ reg->name ?: "(private)",
+ reg->alloc_name ?: "(default)");
+ reg->used = 1;
+ return -ENOENT;
+ }
+ }
+
+ /* Try to initialise the allocator. */
+ reg->private_data = NULL;
+ ret = alloc->init ? alloc->init(reg) : 0;
+ if (unlikely(ret < 0)) {
+ pr_err("init: %s: %s: unable to initialise allocator\n",
+ reg->name ?: "(private)", alloc->name ?: "(unnamed)");
+ reg->alloc = NULL;
+ reg->used = 1;
+ } else {
+ reg->alloc = alloc;
+ /* ++alloc->users; */
+ pr_debug("init: %s: %s: initialised allocator\n",
+ reg->name ?: "(private)", alloc->name ?: "(unnamed)");
+ }
+ return ret;
+}
+
+
+/*
+ * s ::= rules
+ * rules ::= rule [ ';' rules ]
+ * rule ::= patterns '=' regions
+ * patterns ::= pattern [ ',' patterns ]
+ * regions ::= REG-NAME [ ',' regions ]
+ * pattern ::= dev-pattern [ '/' TYPE-NAME ] | '/' TYPE-NAME
+ */
+static const char *__must_check
+__cma_where_from(const struct device *dev, const char *type)
+{
+ /*
+ * This function matches the pattern from the map attribute
+ * agains given device name and type. Type may be of course
+ * NULL or an emtpy string.
+ */
+
+ const char *s, *name;
+ int name_matched = 0;
+
+ /*
+ * If dev is NULL we were called in alternative form where
+ * type is the from string. All we have to do is return it.
+ */
+ if (!dev)
+ return type ?: ERR_PTR(-EINVAL);
+
+ if (!cma_map)
+ return ERR_PTR(-ENOENT);
+
+ name = dev_name(dev);
+ if (WARN_ON(!name || !*name))
+ return ERR_PTR(-EINVAL);
+
+ if (!type)
+ type = "common";
+
+ /*
+ * Now we go throught the cma_map attribute.
+ */
+ for (s = cma_map; *s; ++s) {
+ const char *c;
+
+ /*
+ * If the pattern starts with a slash, the device part of the
+ * pattern matches if it matched previously.
+ */
+ if (*s == '/') {
+ if (!name_matched)
+ goto look_for_next;
+ goto match_type;
+ }
+
+ /*
+ * We are now trying to match the device name. This also
+ * updates the name_matched variable. If, while reading the
+ * spec, we ecnounter comma it means that the pattern does not
+ * match and we need to start over with another pattern (the
+ * one afther the comma). If we encounter equal sign we need
+ * to start over with another rule. If there is a character
+ * that does not match, we neet to look for a comma (to get
+ * another pattern) or semicolon (to get another rule) and try
+ * again if there is one somewhere.
+ */
+
+ name_matched = 0;
+
+ for (c = name; *s != '*' && *c; ++c, ++s)
+ if (*s == '=')
+ goto next_rule;
+ else if (*s == ',')
+ goto next_pattern;
+ else if (*s != '?' && *c != *s)
+ goto look_for_next;
+ if (*s == '*')
+ ++s;
+
+ name_matched = 1;
+
+ /*
+ * Now we need to match the type part of the pattern. If the
+ * pattern is missing it we match only if type points to an
+ * empty string. Otherwise wy try to match it just like name.
+ */
+ if (*s == '/') {
+match_type: /* s points to '/' */
+ ++s;
+
+ for (c = type; *s && *c; ++c, ++s)
+ if (*s == '=')
+ goto next_rule;
+ else if (*s == ',')
+ goto next_pattern;
+ else if (*c != *s)
+ goto look_for_next;
+ }
+
+ /* Return the string behind the '=' sign of the rule. */
+ if (*s == '=')
+ return s + 1;
+ else if (*s == ',')
+ return strchr(s, '=') + 1;
+
+ /* Pattern did not match */
+
+look_for_next:
+ do {
+ ++s;
+ } while (*s != ',' && *s != '=');
+ if (*s == ',')
+ continue;
+
+next_rule: /* s points to '=' */
+ s = strchr(s, ';');
+ if (!s)
+ break;
+
+next_pattern:
+ continue;
+ }
+
+ return ERR_PTR(-ENOENT);
+}