diff mbox series

[4/6] media: ite-cir: carrier and duty cycle can be set via ioctl

Message ID 3cbd3f7f50d64bae20ae4f583a0402956e1c8591.1613989288.git.sean@mess.org (mailing list archive)
State New, archived
Headers show
Series media: ite-cir driver cleanups | expand

Commit Message

Sean Young Feb. 22, 2021, 10:43 a.m. UTC 
The lirc ioctls should be used for this, not module parameters.

Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/ite-cir.c | 32 --------------------------------
 1 file changed, 32 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index c5c7631849d0..748788a43da5 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -33,26 +33,6 @@ 
 
 /* module parameters */
 
-/* low limit for RX carrier freq, Hz, 0 for no RX demodulation */
-static int rx_low_carrier_freq;
-module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, 0 for no RX demodulation");
-
-/* high limit for RX carrier freq, Hz, 0 for no RX demodulation */
-static int rx_high_carrier_freq;
-module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, Hz, 0 for no RX demodulation");
-
-/* override tx carrier frequency */
-static int tx_carrier_freq;
-module_param(tx_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(tx_carrier_freq, "Override TX carrier frequency, Hz");
-
-/* override tx duty cycle */
-static int tx_duty_cycle;
-module_param(tx_duty_cycle, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(tx_duty_cycle, "Override TX duty cycle, 1-100");
-
 /* override default sample period */
 static long sample_period;
 module_param(sample_period, long, S_IRUGO | S_IWUSR);
@@ -1410,18 +1390,6 @@  static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	if (sample_period > 0)
 		itdev->params.sample_period = sample_period;
 
-	if (tx_carrier_freq > 0)
-		itdev->params.tx_carrier_freq = tx_carrier_freq;
-
-	if (tx_duty_cycle > 0 && tx_duty_cycle <= 100)
-		itdev->params.tx_duty_cycle = tx_duty_cycle;
-
-	if (rx_low_carrier_freq > 0)
-		itdev->params.rx_low_carrier_freq = rx_low_carrier_freq;
-
-	if (rx_high_carrier_freq > 0)
-		itdev->params.rx_high_carrier_freq = rx_high_carrier_freq;
-
 	/* set up hardware initial state */
 	itdev->params.init_hardware(itdev);