| Message ID | 3d8d5868-0896-edc8-5cab-490f9c4c498a@xs4all.nl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] vb2: add support for (un)prepare_streaming queue ops | expand |
On 4/29/22 3:45 PM, Hans Verkuil wrote: > Add support for two new (un)prepare_streaming queue ops that are called > when the user calls VIDIOC_STREAMON and STREAMOFF (or closes the fh). > > Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> > --- > This has only been compile tested. Eugen, can you try this with the > atmel-isc series? Hi, Yes definitely. I will try it early next week. Eugen > > The kerneldoc documentation in core.h can be better, but that's why this > is an RFC :-) > --- > diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c > index b203c1e26353..2f95d2102de4 100644 > --- a/drivers/media/common/videobuf2/videobuf2-core.c > +++ b/drivers/media/common/videobuf2/videobuf2-core.c > @@ -544,6 +544,7 @@ static int __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) > */ > if (q->num_buffers) { > bool unbalanced = q->cnt_start_streaming != q->cnt_stop_streaming || > + q->cnt_prepare_streaming != q->cnt_unprepare_streaming; > q->cnt_wait_prepare != q->cnt_wait_finish; > > if (unbalanced || debug) { > @@ -552,14 +553,18 @@ static int __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) > pr_info(" setup: %u start_streaming: %u stop_streaming: %u\n", > q->cnt_queue_setup, q->cnt_start_streaming, > q->cnt_stop_streaming); > + pr_info(" prepare_streaming: %u unprepare_streaming: %u\n", > + q->cnt_prepare_streaming, q->cnt_unprepare_streaming); > pr_info(" wait_prepare: %u wait_finish: %u\n", > q->cnt_wait_prepare, q->cnt_wait_finish); > } > q->cnt_queue_setup = 0; > q->cnt_wait_prepare = 0; > q->cnt_wait_finish = 0; > + q->cnt_prepare_streaming = 0; > q->cnt_start_streaming = 0; > q->cnt_stop_streaming = 0; > + q->cnt_unprepare_streaming = 0; > } > for (buffer = 0; buffer < q->num_buffers; ++buffer) { > struct vb2_buffer *vb = q->bufs[buffer]; > @@ -1991,6 +1996,9 @@ static void __vb2_queue_cancel(struct vb2_queue *q) > if (q->start_streaming_called) > call_void_qop(q, stop_streaming, q); > > + if (q->streaming) > + call_void_qop(q, unprepare_streaming, q); > + > /* > * If you see this warning, then the driver isn't cleaning up properly > * in stop_streaming(). See the stop_streaming() documentation in > @@ -2102,6 +2110,10 @@ int vb2_core_streamon(struct vb2_queue *q, unsigned int type) > return -EINVAL; > } > > + ret = call_qop(q, prepare_streaming, q); > + if (ret) > + return ret; > + > /* > * Tell driver to start streaming provided sufficient buffers > * are available. > @@ -2109,16 +2121,20 @@ int vb2_core_streamon(struct vb2_queue *q, unsigned int type) > if (q->queued_count >= q->min_buffers_needed) { > ret = v4l_vb2q_enable_media_source(q); > if (ret) > - return ret; > + goto unprepare; > ret = vb2_start_streaming(q); > if (ret) > - return ret; > + goto unprepare; > } > > q->streaming = 1; > > dprintk(q, 3, "successful\n"); > return 0; > + > +unprepare: > + call_void_qop(q, unprepare_streaming, q); > + return ret; > } > EXPORT_SYMBOL_GPL(vb2_core_streamon); > > diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h > index 5468b633b9d2..623146476157 100644 > --- a/include/media/videobuf2-core.h > +++ b/include/media/videobuf2-core.h > @@ -386,6 +386,9 @@ struct vb2_buffer { > * the buffer contents will be ignored anyway. > * @buf_cleanup: called once before the buffer is freed; drivers may > * perform any additional cleanup; optional. > + * @prepare_streaming: called once to prepare for 'streaming' state; this is > + * where validation can be done to verify everything is > + * okay to start streaming later. Optional. > * @start_streaming: called once to enter 'streaming' state; the driver may > * receive buffers with @buf_queue callback > * before @start_streaming is called; the driver gets the > @@ -405,6 +408,7 @@ struct vb2_buffer { > * callback by calling vb2_buffer_done() with either > * %VB2_BUF_STATE_DONE or %VB2_BUF_STATE_ERROR; may use > * vb2_wait_for_all_buffers() function > + * @unprepare_streaming:called as counterpart to @prepare_streaming. Optional. > * @buf_queue: passes buffer vb to the driver; driver may start > * hardware operation on this buffer; driver should give > * the buffer back by calling vb2_buffer_done() function; > @@ -432,8 +436,10 @@ struct vb2_ops { > void (*buf_finish)(struct vb2_buffer *vb); > void (*buf_cleanup)(struct vb2_buffer *vb); > > + int (*prepare_streaming)(struct vb2_queue *q); > int (*start_streaming)(struct vb2_queue *q, unsigned int count); > void (*stop_streaming)(struct vb2_queue *q); > + void (*unprepare_streaming)(struct vb2_queue *q); > > void (*buf_queue)(struct vb2_buffer *vb); > > @@ -641,8 +647,10 @@ struct vb2_queue { > u32 cnt_queue_setup; > u32 cnt_wait_prepare; > u32 cnt_wait_finish; > + u32 cnt_prepare_streaming; > u32 cnt_start_streaming; > u32 cnt_stop_streaming; > + u32 cnt_unprepare_streaming; > #endif > }; >
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c index b203c1e26353..2f95d2102de4 100644 --- a/drivers/media/common/videobuf2/videobuf2-core.c +++ b/drivers/media/common/videobuf2/videobuf2-core.c @@ -544,6 +544,7 @@ static int __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) */ if (q->num_buffers) { bool unbalanced = q->cnt_start_streaming != q->cnt_stop_streaming || + q->cnt_prepare_streaming != q->cnt_unprepare_streaming; q->cnt_wait_prepare != q->cnt_wait_finish; if (unbalanced || debug) { @@ -552,14 +553,18 @@ static int __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) pr_info(" setup: %u start_streaming: %u stop_streaming: %u\n", q->cnt_queue_setup, q->cnt_start_streaming, q->cnt_stop_streaming); + pr_info(" prepare_streaming: %u unprepare_streaming: %u\n", + q->cnt_prepare_streaming, q->cnt_unprepare_streaming); pr_info(" wait_prepare: %u wait_finish: %u\n", q->cnt_wait_prepare, q->cnt_wait_finish); } q->cnt_queue_setup = 0; q->cnt_wait_prepare = 0; q->cnt_wait_finish = 0; + q->cnt_prepare_streaming = 0; q->cnt_start_streaming = 0; q->cnt_stop_streaming = 0; + q->cnt_unprepare_streaming = 0; } for (buffer = 0; buffer < q->num_buffers; ++buffer) { struct vb2_buffer *vb = q->bufs[buffer]; @@ -1991,6 +1996,9 @@ static void __vb2_queue_cancel(struct vb2_queue *q) if (q->start_streaming_called) call_void_qop(q, stop_streaming, q); + if (q->streaming) + call_void_qop(q, unprepare_streaming, q); + /* * If you see this warning, then the driver isn't cleaning up properly * in stop_streaming(). See the stop_streaming() documentation in @@ -2102,6 +2110,10 @@ int vb2_core_streamon(struct vb2_queue *q, unsigned int type) return -EINVAL; } + ret = call_qop(q, prepare_streaming, q); + if (ret) + return ret; + /* * Tell driver to start streaming provided sufficient buffers * are available. @@ -2109,16 +2121,20 @@ int vb2_core_streamon(struct vb2_queue *q, unsigned int type) if (q->queued_count >= q->min_buffers_needed) { ret = v4l_vb2q_enable_media_source(q); if (ret) - return ret; + goto unprepare; ret = vb2_start_streaming(q); if (ret) - return ret; + goto unprepare; } q->streaming = 1; dprintk(q, 3, "successful\n"); return 0; + +unprepare: + call_void_qop(q, unprepare_streaming, q); + return ret; } EXPORT_SYMBOL_GPL(vb2_core_streamon); diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index 5468b633b9d2..623146476157 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -386,6 +386,9 @@ struct vb2_buffer { * the buffer contents will be ignored anyway. * @buf_cleanup: called once before the buffer is freed; drivers may * perform any additional cleanup; optional. + * @prepare_streaming: called once to prepare for 'streaming' state; this is + * where validation can be done to verify everything is + * okay to start streaming later. Optional. * @start_streaming: called once to enter 'streaming' state; the driver may * receive buffers with @buf_queue callback * before @start_streaming is called; the driver gets the @@ -405,6 +408,7 @@ struct vb2_buffer { * callback by calling vb2_buffer_done() with either * %VB2_BUF_STATE_DONE or %VB2_BUF_STATE_ERROR; may use * vb2_wait_for_all_buffers() function + * @unprepare_streaming:called as counterpart to @prepare_streaming. Optional. * @buf_queue: passes buffer vb to the driver; driver may start * hardware operation on this buffer; driver should give * the buffer back by calling vb2_buffer_done() function; @@ -432,8 +436,10 @@ struct vb2_ops { void (*buf_finish)(struct vb2_buffer *vb); void (*buf_cleanup)(struct vb2_buffer *vb); + int (*prepare_streaming)(struct vb2_queue *q); int (*start_streaming)(struct vb2_queue *q, unsigned int count); void (*stop_streaming)(struct vb2_queue *q); + void (*unprepare_streaming)(struct vb2_queue *q); void (*buf_queue)(struct vb2_buffer *vb); @@ -641,8 +647,10 @@ struct vb2_queue { u32 cnt_queue_setup; u32 cnt_wait_prepare; u32 cnt_wait_finish; + u32 cnt_prepare_streaming; u32 cnt_start_streaming; u32 cnt_stop_streaming; + u32 cnt_unprepare_streaming; #endif };
Add support for two new (un)prepare_streaming queue ops that are called when the user calls VIDIOC_STREAMON and STREAMOFF (or closes the fh). Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> --- This has only been compile tested. Eugen, can you try this with the atmel-isc series? The kerneldoc documentation in core.h can be better, but that's why this is an RFC :-) ---