From patchwork Mon Feb 18 19:29:03 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10818659 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2A5ED6C2 for ; Mon, 18 Feb 2019 19:29:21 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 144C32AD4C for ; Mon, 18 Feb 2019 19:29:21 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 07B422AD95; Mon, 18 Feb 2019 19:29:21 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5D96F2AD4C for ; Mon, 18 Feb 2019 19:29:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726219AbfBRT3R (ORCPT ); Mon, 18 Feb 2019 14:29:17 -0500 Received: from bombadil.infradead.org ([198.137.202.133]:34276 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726144AbfBRT3Q (ORCPT ); Mon, 18 Feb 2019 14:29:16 -0500 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=T5Nv6+Wp9qJjFLemyNt6p0KKAck6nff7VivMinGT978=; b=hvVPTxvB7aHlV7RiRsNReWvKda DYHzeHeg62ISdHyFcFaYveGVHvrg9JrogetXhYPPsS6kHbyhIIV1MNWCS4Pk+ONI1ZBqy874dwHWv QvZjuhJCyzHQyt3zgeubIAb8oSRoFS6khg8OPi4swxTdK+msnx4oEbrMeJi5asWyGYopv0DxkDX8H +yQmStOqWwG+j/xCm+SJqmGHhNefdRzQWXqM9Hko+axPX5J/TWS3bwj1/1vV1pGOJU4GeWa9csChO heIm7P8bfBxkqvu6sVLI2Ezo9dr6BcOnZ6bTJAffhPH9gkM9aWQwrt4Ua+hOTiWzmAxVH2fOlISsw OsvcsA+Q==; Received: from 177.96.194.24.dynamic.adsl.gvt.net.br ([177.96.194.24] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1gvobJ-0002Ur-9i; Mon, 18 Feb 2019 19:29:13 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.91) (envelope-from ) id 1gvobG-0006g6-DT; Mon, 18 Feb 2019 14:29:10 -0500 From: Mauro Carvalho Chehab Cc: Mauro Carvalho Chehab , Linux Media Mailing List , Mauro Carvalho Chehab , Antti Palosaari , Malcolm Priestley , Michael Krufky , Hans Verkuil , Brian Johnson , Leandro Costantino , Ezequiel Garcia , Laurent Pinchart , Antoine Jacquet , linux-usb@vger.kernel.org Subject: [PATCH 09/14] media: usb: fix several typos Date: Mon, 18 Feb 2019 14:29:03 -0500 Message-Id: <5fd53931784e7db034dde7f731931fb1ae484706.1550518128.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 To: unlisted-recipients:; (no To-header on input) Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/au0828/au0828-core.c | 2 +- drivers/media/usb/au0828/au0828.h | 2 +- drivers/media/usb/cx231xx/cx231xx-avcore.c | 2 +- drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h | 2 +- drivers/media/usb/cx231xx/cx231xx.h | 2 +- drivers/media/usb/dvb-usb-v2/dvb_usb.h | 2 +- drivers/media/usb/dvb-usb-v2/lmedm04.c | 8 ++++---- drivers/media/usb/dvb-usb-v2/mxl111sf.c | 4 ++-- drivers/media/usb/dvb-usb/af9005.c | 2 +- drivers/media/usb/dvb-usb/cinergyT2-fe.c | 2 +- drivers/media/usb/dvb-usb/cxusb.c | 2 +- drivers/media/usb/dvb-usb/dvb-usb-init.c | 2 +- drivers/media/usb/dvb-usb/dvb-usb.h | 2 +- drivers/media/usb/dvb-usb/pctv452e.c | 4 ++-- drivers/media/usb/em28xx/em28xx-i2c.c | 4 ++-- drivers/media/usb/em28xx/em28xx-reg.h | 2 +- drivers/media/usb/gspca/Kconfig | 2 +- drivers/media/usb/gspca/autogain_functions.c | 2 +- drivers/media/usb/gspca/benq.c | 4 ++-- drivers/media/usb/gspca/mr97310a.c | 10 +++++----- drivers/media/usb/gspca/ov519.c | 4 ++-- drivers/media/usb/gspca/pac_common.h | 2 +- drivers/media/usb/gspca/sn9c20x.c | 2 +- drivers/media/usb/gspca/sonixb.c | 4 ++-- drivers/media/usb/gspca/sonixj.c | 2 +- drivers/media/usb/gspca/spca501.c | 2 +- drivers/media/usb/gspca/sq905.c | 2 +- drivers/media/usb/gspca/sunplus.c | 4 ++-- drivers/media/usb/gspca/t613.c | 2 +- drivers/media/usb/gspca/touptek.c | 4 ++-- drivers/media/usb/gspca/w996Xcf.c | 2 +- drivers/media/usb/gspca/zc3xx-reg.h | 2 +- drivers/media/usb/gspca/zc3xx.c | 8 ++++---- drivers/media/usb/hdpvr/hdpvr.h | 2 +- drivers/media/usb/pwc/pwc-dec23.c | 4 ++-- drivers/media/usb/pwc/pwc-if.c | 2 +- drivers/media/usb/pwc/pwc-misc.c | 2 +- drivers/media/usb/siano/smsusb.c | 2 +- drivers/media/usb/stk1160/stk1160-core.c | 4 ++-- drivers/media/usb/stk1160/stk1160-reg.h | 4 ++-- drivers/media/usb/stkwebcam/stk-webcam.c | 2 +- drivers/media/usb/tm6000/tm6000-alsa.c | 2 +- drivers/media/usb/tm6000/tm6000-core.c | 4 ++-- drivers/media/usb/tm6000/tm6000-dvb.c | 2 +- drivers/media/usb/tm6000/tm6000-i2c.c | 2 +- drivers/media/usb/tm6000/tm6000-stds.c | 2 +- drivers/media/usb/tm6000/tm6000-video.c | 2 +- drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 2 +- drivers/media/usb/ttusb-dec/ttusb_dec.c | 2 +- drivers/media/usb/usbvision/usbvision-core.c | 8 ++++---- drivers/media/usb/usbvision/usbvision.h | 8 ++++---- drivers/media/usb/uvc/uvc_video.c | 2 +- drivers/media/usb/zr364xx/zr364xx.c | 2 +- 53 files changed, 81 insertions(+), 81 deletions(-) diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c index 1fdb1601dc65..3f8c92a70116 100644 --- a/drivers/media/usb/au0828/au0828-core.c +++ b/drivers/media/usb/au0828/au0828-core.c @@ -234,7 +234,7 @@ static void au0828_media_graph_notify(struct media_entity *new, if (!new) { /* * Called during au0828 probe time to connect - * entites that were created prior to registering + * entities that were created prior to registering * the notify handler. Find mixer and decoder. */ media_device_for_each_entity(entity, dev->media_dev) { diff --git a/drivers/media/usb/au0828/au0828.h b/drivers/media/usb/au0828/au0828.h index 004eadef55c7..425c35d16057 100644 --- a/drivers/media/usb/au0828/au0828.h +++ b/drivers/media/usb/au0828/au0828.h @@ -52,7 +52,7 @@ #define AU0828_INTERLACED_DEFAULT 1 -/* Defination for AU0828 USB transfer */ +/* Definition for AU0828 USB transfer */ #define AU0828_MAX_ISO_BUFS 12 /* maybe resize this value in the future */ #define AU0828_ISO_PACKETS_PER_URB 128 diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c index fdd3c221fa0d..3374888b3021 100644 --- a/drivers/media/usb/cx231xx/cx231xx-avcore.c +++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c @@ -2987,7 +2987,7 @@ int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev) { int status = 0; - /* set SDA to ouput */ + /* set SDA to output */ dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); diff --git a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h index 8f00b1d38277..bb4f817be0c5 100644 --- a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h +++ b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h @@ -86,7 +86,7 @@ enum TS_PORT{ #define EAVP_MASK 0x8 enum EAV_PRESENT{ NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs - (no need for i2s blcok), + (no need for i2s block), Analog Tuner must be present */ EXTERNAL_AV = 0x8 /* 1: External A/V inputs present (requires i2s blk) */ diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h index fa640bf20111..86b7f57492b1 100644 --- a/drivers/media/usb/cx231xx/cx231xx.h +++ b/drivers/media/usb/cx231xx/cx231xx.h @@ -646,7 +646,7 @@ struct cx231xx { /* frame properties */ int width; /* current frame width */ int height; /* current frame height */ - int interlaced; /* 1=interlace fileds, 0=just top fileds */ + int interlaced; /* 1=interlace fields, 0=just top fields */ struct cx231xx_audio adev; diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h index 3fd6cc0d6340..728ef5f3ada2 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h @@ -146,7 +146,7 @@ struct dvb_usb_rc { }; /** - * usb streaming configration for adapter + * usb streaming configuration for adapter * @type: urb type * @count: count of used urbs * @endpoint: stream usb endpoint number diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index 602013cf3e69..15944b95970f 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -308,7 +308,7 @@ static void lme2510_int_response(struct urb *lme_urb) switch (ibuf[0]) { case 0xaa: - debug_data_snipet(1, "INT Remote data snipet", ibuf); + debug_data_snipet(1, "INT Remote data snippet", ibuf); if (!adap_to_d(adap)->rc_dev) break; @@ -358,13 +358,13 @@ static void lme2510_int_response(struct urb *lme_urb) lme2510_update_stats(adap); - debug_data_snipet(5, "INT Remote data snipet in", ibuf); + debug_data_snipet(5, "INT Remote data snippet in", ibuf); break; case 0xcc: - debug_data_snipet(1, "INT Control data snipet", ibuf); + debug_data_snipet(1, "INT Control data snippet", ibuf); break; default: - debug_data_snipet(1, "INT Unknown data snipet", ibuf); + debug_data_snipet(1, "INT Unknown data snippet", ibuf); break; } } diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 85cdf593a9ad..5e2d53af68c7 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -140,7 +140,7 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state, if (mask != 0xff) { ret = mxl111sf_read_reg(state, addr, &val); #if 1 - /* dont know why this usually errors out on the first try */ + /* don't know why this usually errors out on the first try */ if (mxl_fail(ret)) pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...", addr, mask, data); @@ -783,7 +783,7 @@ static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id) if (mxl_fail(ret)) goto fail; - /* dont care if this fails */ + /* don't care if this fails */ mxl111sf_init_port_expander(state); adap->fe[fe_id] = dvb_attach(mxl111sf_demod_attach, state, diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index 16e946e01d2c..0638d907c73e 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -845,7 +845,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) /* deb_info("rc_query\n"); */ st->data[0] = 3; /* rest of packet length low */ - st->data[1] = 0; /* rest of packet lentgh high */ + st->data[1] = 0; /* rest of packet length high */ st->data[2] = 0x40; /* read remote */ st->data[3] = 1; /* rest of packet length */ st->data[4] = seq = st->sequence++; /* sequence number */ diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c index df71df7ed524..4c9f83ba260d 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -33,7 +33,7 @@ * This function is probably reusable and may better get placed in a support * library. * - * We replace errornous fields by default TPS fields (the ones with value 0). + * We replace erroneous fields by default TPS fields (the ones with value 0). */ static uint16_t compute_tps(struct dtv_frontend_properties *op) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index a51a45c60233..9ddb2000249e 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -1016,7 +1016,7 @@ static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) /* * No need to call dvb7000p_attach here, as it was called * already, as frontend_attach method is called first, and - * tuner_attach is only called on sucess. + * tuner_attach is only called on success. */ tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 40ca4eafb137..99951e02a880 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -98,7 +98,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) /* * when reloading the driver w/o replugging the device - * sometimes a timeout occures, this helps + * sometimes a timeout occurs, this helps */ if (d->props.generic_bulk_ctrl_endpoint != 0) { usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h index 317ed6a82d19..32829bdd5f22 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb.h +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -336,7 +336,7 @@ struct usb_data_stream { * struct dvb_usb_adapter - a DVB adapter on a USB device * @id: index of this adapter (starting with 0). * - * @feedcount: number of reqested feeds (used for streaming-activation) + * @feedcount: number of requested feeds (used for streaming-activation) * @pid_filtering: is hardware pid_filtering used or not. * * @pll_addr: I2C address of the tuner for programming diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index 0af74383083d..150081128196 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -528,13 +528,13 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) rx = b0 + 5; - /* hmm where shoud this should go? */ + /* hmm where should this should go? */ ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE); if (ret != 0) info("%s: Warning set interface returned: %d\n", __func__, ret); - /* this is a one-time initialization, dont know where to put */ + /* this is a one-time initialization, don't know where to put */ b0[0] = 0xaa; b0[1] = state->c++; b0[2] = PCTV_CMD_RESET; diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index 02c13d71e6c1..a3155ec196cc 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -296,7 +296,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) return ret; } /* - * NOTE: some devices with two i2c busses have the bad habit to return 0 + * NOTE: some devices with two i2c buses have the bad habit to return 0 * bytes if we are on bus B AND there was no write attempt to the * specified slave address before AND no device is present at the * requested slave address. @@ -427,7 +427,7 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, return ret; } /* - * NOTE: some devices with two i2c busses have the bad habit to return 0 + * NOTE: some devices with two i2c buses have the bad habit to return 0 * bytes if we are on bus B AND there was no write attempt to the * specified slave address before AND no device is present at the * requested slave address. diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h index f53afe18e92d..d7c60862874a 100644 --- a/drivers/media/usb/em28xx/em28xx-reg.h +++ b/drivers/media/usb/em28xx/em28xx-reg.h @@ -67,7 +67,7 @@ #define EM28XX_I2C_CLK_WAIT_ENABLE 0x40 #define EM28XX_I2C_EEPROM_ON_BOARD 0x08 #define EM28XX_I2C_EEPROM_KEY_VALID 0x04 -#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */ +#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c buses */ #define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */ #define EM28XX_I2C_FREQ_25_KHZ 0x02 #define EM28XX_I2C_FREQ_400_KHZ 0x01 diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig index d3b6665c342d..088566e88467 100644 --- a/drivers/media/usb/gspca/Kconfig +++ b/drivers/media/usb/gspca/Kconfig @@ -46,7 +46,7 @@ config USB_GSPCA_CPIA1 depends on VIDEO_V4L2 && USB_GSPCA help Say Y here if you want support for USB cameras based on the cpia - CPiA chip. Note that you need atleast version 0.6.4 of libv4l for + CPiA chip. Note that you need at least version 0.6.4 of libv4l for applications to understand the videoformat generated by this driver. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/gspca/autogain_functions.c b/drivers/media/usb/gspca/autogain_functions.c index 6dfab2b077f7..f915cc7c0c63 100644 --- a/drivers/media/usb/gspca/autogain_functions.c +++ b/drivers/media/usb/gspca/autogain_functions.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL(gspca_expo_autogain); 80 %) and if that does not help, only then changes exposure. This leads to a much more stable image then using the knee algorithm which at certain points of the knee graph will only try to adjust exposure, - which leads to oscilating as one exposure step is huge. + which leads to oscillating as one exposure step is huge. Returns 0 if no changes were made, 1 if the gain and or exposure settings where changed. */ diff --git a/drivers/media/usb/gspca/benq.c b/drivers/media/usb/gspca/benq.c index 8a8db5eb6d5f..1744591b8ba0 100644 --- a/drivers/media/usb/gspca/benq.c +++ b/drivers/media/usb/gspca/benq.c @@ -205,12 +205,12 @@ static void sd_isoc_irq(struct urb *urb) * - 80 ba/bb 00 00 = start of image followed by 'ff d8' * - 04 ba/bb oo oo = image piece * where 'oo oo' is the image offset - (not cheked) + (not checked) * - (other -> bad frame) * The images are JPEG encoded with full header and * normal ff escape. * The end of image ('ff d9') may occur in any URB. - * (not cheked) + * (not checked) */ data = (u8 *) urb0->transfer_buffer + urb0->iso_frame_desc[i].offset; diff --git a/drivers/media/usb/gspca/mr97310a.c b/drivers/media/usb/gspca/mr97310a.c index bea196361215..af454663e295 100644 --- a/drivers/media/usb/gspca/mr97310a.c +++ b/drivers/media/usb/gspca/mr97310a.c @@ -520,7 +520,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev) switch (gspca_dev->pixfmt.width) { case 160: data[9] |= 0x04; /* reg 8, 2:1 scale down from 320 */ - /* fall thru */ + /* fall through */ case 320: default: data[3] = 0x28; /* reg 2, H size/8 */ @@ -530,7 +530,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev) break; case 176: data[9] |= 0x04; /* reg 8, 2:1 scale down from 352 */ - /* fall thru */ + /* fall through */ case 352: data[3] = 0x2c; /* reg 2, H size/8 */ data[4] = 0x48; /* reg 3, V size/4 */ @@ -617,10 +617,10 @@ static int start_vga_cam(struct gspca_dev *gspca_dev) switch (gspca_dev->pixfmt.width) { case 160: data[9] |= 0x0c; /* reg 8, 4:1 scale down */ - /* fall thru */ + /* fall through */ case 320: data[9] |= 0x04; /* reg 8, 2:1 scale down */ - /* fall thru */ + /* fall through */ case 640: default: data[3] = 0x50; /* reg 2, H size/8 */ @@ -637,7 +637,7 @@ static int start_vga_cam(struct gspca_dev *gspca_dev) case 176: data[9] |= 0x04; /* reg 8, 2:1 scale down */ - /* fall thru */ + /* fall through */ case 352: data[3] = 0x2c; /* reg 2, H size */ data[4] = 0x48; /* reg 3, V size */ diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c index 10fcbe9e8614..f2799e8cb8e7 100644 --- a/drivers/media/usb/gspca/ov519.c +++ b/drivers/media/usb/gspca/ov519.c @@ -1945,7 +1945,7 @@ static const struct ov_i2c_regvals norm_8610[] = { { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */ { 0x63, 0xff }, { 0x64, 0x53 }, /* new windrv 090403 says 0x57, - * maybe thats wrong */ + * maybe that's wrong */ { 0x65, 0x00 }, { 0x66, 0x55 }, { 0x67, 0xb0 }, @@ -3658,7 +3658,7 @@ static void ov518_mode_init_regs(struct sd *sd) case SEN_OV7620AE: /* * HdG: 640x480 needs special handling on device - * revision 2, we check for device revison > 0 to + * revision 2, we check for device revision > 0 to * avoid regressions, as we don't know the correct * thing todo for revision 1. * diff --git a/drivers/media/usb/gspca/pac_common.h b/drivers/media/usb/gspca/pac_common.h index 31f2a42af4dd..aae97a5534e3 100644 --- a/drivers/media/usb/gspca/pac_common.h +++ b/drivers/media/usb/gspca/pac_common.h @@ -21,7 +21,7 @@ /* We calculate the autogain at the end of the transfer of a frame, at this moment a frame with the old settings is being captured and transmitted. So - if we adjust the gain or exposure we must ignore atleast the next frame for + if we adjust the gain or exposure we must ignore at least the next frame for the new settings to come into effect before doing any other adjustments. */ #define PAC_AUTOGAIN_IGNORE_FRAMES 2 diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c index 5984bb12bcff..ab912903f8d7 100644 --- a/drivers/media/usb/gspca/sn9c20x.c +++ b/drivers/media/usb/gspca/sn9c20x.c @@ -1634,7 +1634,7 @@ static int sd_config(struct gspca_dev *gspca_dev, break; case SENSOR_HV7131R: sd->i2c_intf = 0x81; /* i2c 400 Kb/s */ - /* fall thru */ + /* fall through */ default: cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c index 5f3f2979540a..583c9f10198c 100644 --- a/drivers/media/usb/gspca/sonixb.c +++ b/drivers/media/usb/gspca/sonixb.c @@ -121,7 +121,7 @@ struct sensor_data { /* We calculate the autogain at the end of the transfer of a frame, at this moment a frame with the old settings is being captured and transmitted. So - if we adjust the gain or exposure we must ignore atleast the next frame for + if we adjust the gain or exposure we must ignore at least the next frame for the new settings to come into effect before doing any other adjustments. */ #define AUTOGAIN_IGNORE_FRAMES 1 @@ -757,7 +757,7 @@ static void setexposure(struct gspca_dev *gspca_dev) /* Don't allow this to get below 10 when using autogain, the steps become very large (relatively) when below 10 causing - the image to oscilate from much too dark, to much too bright + the image to oscillate from much too dark, to much too bright and back again. */ if (gspca_dev->autogain->val && reg10 < 10) reg10 = 10; diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c index df8d8482b795..a63f155f1515 100644 --- a/drivers/media/usb/gspca/sonixj.c +++ b/drivers/media/usb/gspca/sonixj.c @@ -2677,7 +2677,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, * which is 62 bytes long and is followed by various information * including statuses and luminosity. * - * A marker may be splitted on two packets. + * A marker may be split on two packets. * * The 6th byte of a marker contains the bits: * 0x08: USB full diff --git a/drivers/media/usb/gspca/spca501.c b/drivers/media/usb/gspca/spca501.c index 2cce74b166d8..3d215952af18 100644 --- a/drivers/media/usb/gspca/spca501.c +++ b/drivers/media/usb/gspca/spca501.c @@ -574,7 +574,7 @@ static const __u16 spca501_3com_open_data[][3] = { {0x0, 0x0001, 0x0010}, /* TG Start Clock */ /* {0x2, 0x006a, 0x0001}, * C/S Enable ISOSYNCH Packet Engine */ - {0x2, 0x0068, 0x0001}, /* C/S Diable ISOSYNCH Packet Engine */ + {0x2, 0x0068, 0x0001}, /* C/S Disable ISOSYNCH Packet Engine */ {0x2, 0x0000, 0x0005}, {0x2, 0x0043, 0x0000}, /* C/S Set Timing Mode, Disable TG soft reset */ {0x2, 0x0043, 0x0000}, /* C/S Set Timing Mode, Disable TG soft reset */ diff --git a/drivers/media/usb/gspca/sq905.c b/drivers/media/usb/gspca/sq905.c index ffea9c35b0a0..d5c48216deb7 100644 --- a/drivers/media/usb/gspca/sq905.c +++ b/drivers/media/usb/gspca/sq905.c @@ -18,7 +18,7 @@ * History and Acknowledgments * * The original Linux driver for SQ905 based cameras was written by - * Marcell Lengyel and furter developed by many other contributors + * Marcell Lengyel and further developed by many other contributors * and is available from http://sourceforge.net/projects/sqcam/ * * This driver takes advantage of the reverse engineering work done for diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c index 437a3367ab97..e1e2a605a46c 100644 --- a/drivers/media/usb/gspca/sunplus.c +++ b/drivers/media/usb/gspca/sunplus.c @@ -555,7 +555,7 @@ static void init_ctl_reg(struct gspca_dev *gspca_dev) case BRIDGE_SPCA504: case BRIDGE_SPCA504C: pollreg = 0; - /* fall thru */ + /* fall through */ default: /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA504B: */ @@ -638,7 +638,7 @@ static int sd_init(struct gspca_dev *gspca_dev) reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00); reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13); reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00); - /* fall thru */ + /* fall through */ case BRIDGE_SPCA533: spca504B_PollingDataReady(gspca_dev); spca50x_GetFirmware(gspca_dev); diff --git a/drivers/media/usb/gspca/t613.c b/drivers/media/usb/gspca/t613.c index 445782919446..ed9b925b723e 100644 --- a/drivers/media/usb/gspca/t613.c +++ b/drivers/media/usb/gspca/t613.c @@ -966,7 +966,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev) V4L2_CID_SATURATION, 0, 0xf, 1, 5); v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 10); - /* Activate lowlight, some apps dont bring up the + /* Activate lowlight, some apps don't bring up the backlight_compensation control) */ v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, V4L2_CID_BACKLIGHT_COMPENSATION, 0, 1, 1, 1); diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c index d1b9032d7863..6c056a448231 100644 --- a/drivers/media/usb/gspca/touptek.c +++ b/drivers/media/usb/gspca/touptek.c @@ -185,7 +185,7 @@ static const struct v4l2_pix_format vga_mode[] = { }; /* - * As theres no known frame sync, the only way to keep synced is to try hard + * As there's no known frame sync, the only way to keep synced is to try hard * to never miss any packets */ #if MAX_NURBS < 4 @@ -259,7 +259,7 @@ static void setexposure(struct gspca_dev *gspca_dev, s32 val) return; } gspca_dbg(gspca_dev, D_STREAM, "exposure: 0x%04X ms\n\n", value); - /* Wonder if theres a good reason for sending it twice */ + /* Wonder if there's a good reason for sending it twice */ /* probably not but leave it in because...why not */ reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_); reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_); diff --git a/drivers/media/usb/gspca/w996Xcf.c b/drivers/media/usb/gspca/w996Xcf.c index abfab3de1866..36cc5a5ce77a 100644 --- a/drivers/media/usb/gspca/w996Xcf.c +++ b/drivers/media/usb/gspca/w996Xcf.c @@ -431,7 +431,7 @@ static void w9968cf_set_crop_window(struct sd *sd) start_cropy = 35; } - /* Work around to avoid FP arithmetics */ + /* Work around to avoid FP arithmetic */ #define SC(x) ((x) << 10) /* Scaling factors */ diff --git a/drivers/media/usb/gspca/zc3xx-reg.h b/drivers/media/usb/gspca/zc3xx-reg.h index 71fda38e85e0..26f6153b687f 100644 --- a/drivers/media/usb/gspca/zc3xx-reg.h +++ b/drivers/media/usb/gspca/zc3xx-reg.h @@ -26,7 +26,7 @@ /* Test mode */ #define ZC3XX_R00B_TESTMODECONTROL 0x000b -/* Frame retreiving */ +/* Frame retrieving */ #define ZC3XX_R00C_LASTACQTIME 0x000c #define ZC3XX_R00D_MONITORRES 0x000d #define ZC3XX_R00E_TIMESTAMPHIGH 0x000e diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c index cf21991e3d99..ad7194029031 100644 --- a/drivers/media/usb/gspca/zc3xx.c +++ b/drivers/media/usb/gspca/zc3xx.c @@ -3602,7 +3602,7 @@ static const struct usb_action pas106b_InitialScale[] = { /* 176x144 */ {0xaa, 0x14, 0x0081}, /* Other registers */ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION}, -/* Frame retreiving */ +/* Frame retrieving */ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* Gains */ {0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN}, @@ -3718,7 +3718,7 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */ {0xaa, 0x14, 0x0081}, /* Other registers */ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION}, -/* Frame retreiving */ +/* Frame retrieving */ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* Gains */ {0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN}, @@ -6775,7 +6775,7 @@ static int sd_start(struct gspca_dev *gspca_dev) case SENSOR_HV7131R: case SENSOR_TAS5130C: reg_r(gspca_dev, 0x0008); - /* fall thru */ + /* fall through */ case SENSOR_PO2030: reg_w(gspca_dev, 0x03, 0x0008); break; @@ -6824,7 +6824,7 @@ static int sd_start(struct gspca_dev *gspca_dev) case SENSOR_TAS5130C: reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */ reg_w(gspca_dev, 0x15, 0x01ae); - /* fall thru */ + /* fall through */ case SENSOR_PAS202B: case SENSOR_PO2030: /* reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN); in win traces */ diff --git a/drivers/media/usb/hdpvr/hdpvr.h b/drivers/media/usb/hdpvr/hdpvr.h index 1d65b4185f57..fa43e1d45ea9 100644 --- a/drivers/media/usb/hdpvr/hdpvr.h +++ b/drivers/media/usb/hdpvr/hdpvr.h @@ -215,7 +215,7 @@ enum { */ /* :0 s 38 01 1700 0003 0001 1 = 00 - * VIDEO STANDARD or FREQUNCY 0 = 60hz, 1 = 50hz + * VIDEO STANDARD or FREQUENCY 0 = 60hz, 1 = 50hz */ /* :0 s 38 01 3100 0003 0004 4 = 03030000 diff --git a/drivers/media/usb/pwc/pwc-dec23.c b/drivers/media/usb/pwc/pwc-dec23.c index 1283b3bd9800..854c36a5dec9 100644 --- a/drivers/media/usb/pwc/pwc-dec23.c +++ b/drivers/media/usb/pwc/pwc-dec23.c @@ -41,7 +41,7 @@ * UNROLL_LOOP_FOR_COPYING_BLOCK * 0: use a loop for a smaller code (but little slower) * 1: when unrolling the loop, gcc produces some faster code (perhaps only - * valid for intel processor class). Activating this option, automaticaly + * valid for intel processor class). Activating this option, automatically * activate USE_LOOKUP_TABLE_TO_CLAMP */ #define UNROLL_LOOP_FOR_COPY 1 @@ -332,7 +332,7 @@ void pwc_dec23_init(struct pwc_device *pdev, const unsigned char *cmd) build_table_color(TimonRomTable[version][1], pdec->table_0004_pass2, pdec->table_8004_pass2); } - /* Informations can be coded on a variable number of bits but never less than 8 */ + /* Information can be coded on a variable number of bits but never less than 8 */ shift = 8 - pdec->nbits; pdec->scalebits = SCALEBITS - shift; pdec->nbitsmask = 0xFF >> shift; diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c index a81fb319b339..4e94197094ad 100644 --- a/drivers/media/usb/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -653,7 +653,7 @@ static int buffer_prepare(struct vb2_buffer *vb) { struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); - /* Don't allow queing new buffers after device disconnection */ + /* Don't allow queueing new buffers after device disconnection */ if (!pdev->udev) return -ENODEV; diff --git a/drivers/media/usb/pwc/pwc-misc.c b/drivers/media/usb/pwc/pwc-misc.c index 9be5adffa874..03888fc3804d 100644 --- a/drivers/media/usb/pwc/pwc-misc.c +++ b/drivers/media/usb/pwc/pwc-misc.c @@ -59,7 +59,7 @@ int pwc_get_size(struct pwc_device *pdev, int width, int height) return i; } - /* Never reached there always is atleast one supported mode */ + /* Never reached there always is at least one supported mode */ return 0; } diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c index 2ffded08407b..4fc03ec8a4f1 100644 --- a/drivers/media/usb/siano/smsusb.c +++ b/drivers/media/usb/siano/smsusb.c @@ -75,7 +75,7 @@ static int smsusb_submit_urb(struct smsusb_device_t *dev, struct smsusb_urb_t *surb); /* - * Completing URB's callback handler - bottom half (proccess context) + * Completing URB's callback handler - bottom half (process context) * submits the URB prepared on smsusb_onresponse() */ static void do_submit_urb(struct work_struct *work) diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c index 468f5ccf4ae6..a44a44ff3bb1 100644 --- a/drivers/media/usb/stk1160/stk1160-core.c +++ b/drivers/media/usb/stk1160/stk1160-core.c @@ -297,7 +297,7 @@ static int stk1160_probe(struct usb_interface *interface, return -ENOMEM; /* - * Scan usb posibilities and populate alt_max_pkt_size array. + * Scan usb possibilities and populate alt_max_pkt_size array. * Also, check if device speed is fast enough. */ rc = stk1160_scan_usb(interface, udev, alt_max_pkt_size); @@ -426,7 +426,7 @@ static void stk1160_disconnect(struct usb_interface *interface) /* * This calls stk1160_release if it's the last reference. - * Otherwise, release is posponed until there are no users left. + * Otherwise, release is postponed until there are no users left. */ v4l2_device_put(&dev->v4l2_dev); } diff --git a/drivers/media/usb/stk1160/stk1160-reg.h b/drivers/media/usb/stk1160/stk1160-reg.h index 7b08a3cc4504..2e400db0ad0e 100644 --- a/drivers/media/usb/stk1160/stk1160-reg.h +++ b/drivers/media/usb/stk1160/stk1160-reg.h @@ -23,7 +23,7 @@ /* GPIO Control */ #define STK1160_GCTRL 0x000 -/* Remote Wakup Control */ +/* Remote Wakeup Control */ #define STK1160_RMCTL 0x00c /* Power-on Strapping Data */ @@ -104,7 +104,7 @@ #define STK1160_SBUSR_RA 0x208 #define STK1160_SBUSR_RD 0x209 -/* Alternate Serial Inteface Control */ +/* Alternate Serial Interface Control */ #define STK1160_ASIC 0x2fc /* PLL Select Options */ diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index 03f5e12b13a5..8f545861471e 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -1006,7 +1006,7 @@ static int stk_setup_format(struct stk_camera *dev) stk_camera_write_reg(dev, 0x001c, 0x46); /* * Registers 0x0115 0x0114 are the size of each line (bytes), - * regs 0x0117 0x0116 are the heigth of the image. + * regs 0x0117 0x0116 are the height of the image. */ stk_camera_write_reg(dev, 0x0115, ((stk_sizes[i].w * depth) >> 8) & 0xff); diff --git a/drivers/media/usb/tm6000/tm6000-alsa.c b/drivers/media/usb/tm6000/tm6000-alsa.c index b965931793b5..d6c79c13b332 100644 --- a/drivers/media/usb/tm6000/tm6000-alsa.c +++ b/drivers/media/usb/tm6000/tm6000-alsa.c @@ -58,7 +58,7 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable debug messages"); /**************************************************************************** - Module specific funtions + Module specific functions ****************************************************************************/ /* diff --git a/drivers/media/usb/tm6000/tm6000-core.c b/drivers/media/usb/tm6000/tm6000-core.c index d3229aa45fcb..2c723706f8c8 100644 --- a/drivers/media/usb/tm6000/tm6000-core.c +++ b/drivers/media/usb/tm6000/tm6000-core.c @@ -668,7 +668,7 @@ int tm6000_set_audio_rinput(struct tm6000_core *dev) areg_f0 = 0x04; break; default: - printk(KERN_INFO "%s: audio input dosn't support\n", + printk(KERN_INFO "%s: audio input doesn't support\n", dev->name); return 0; break; @@ -690,7 +690,7 @@ int tm6000_set_audio_rinput(struct tm6000_core *dev) areg_eb = 0x04; break; default: - printk(KERN_INFO "%s: audio input dosn't support\n", + printk(KERN_INFO "%s: audio input doesn't support\n", dev->name); return 0; break; diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c index 3a4e545c6037..36eea1950e77 100644 --- a/drivers/media/usb/tm6000/tm6000-dvb.c +++ b/drivers/media/usb/tm6000/tm6000-dvb.c @@ -149,7 +149,7 @@ static int tm6000_start_stream(struct tm6000_core *dev) ret, __func__); return ret; } else - printk(KERN_ERR "tm6000: pipe resetted\n"); + printk(KERN_ERR "tm6000: pipe reset\n"); /* mutex_lock(&tm6000_driver.open_close_mutex); */ ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC); diff --git a/drivers/media/usb/tm6000/tm6000-i2c.c b/drivers/media/usb/tm6000/tm6000-i2c.c index 8c0476dfe54f..b37782d6f79c 100644 --- a/drivers/media/usb/tm6000/tm6000-i2c.c +++ b/drivers/media/usb/tm6000/tm6000-i2c.c @@ -155,7 +155,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap, /* * The TM6000 only supports a read transaction * immediately after a 1 or 2 byte write to select - * a register. We cannot fulfil this request. + * a register. We cannot fulfill this request. */ i2c_dprintk(2, " read without preceding write not supported"); rc = -EOPNOTSUPP; diff --git a/drivers/media/usb/tm6000/tm6000-stds.c b/drivers/media/usb/tm6000/tm6000-stds.c index c0c75951246b..858cb4f3a9ca 100644 --- a/drivers/media/usb/tm6000/tm6000-stds.c +++ b/drivers/media/usb/tm6000/tm6000-stds.c @@ -323,7 +323,7 @@ static int tm6000_set_audio_std(struct tm6000_core *dev) { uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */ uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */ - uint8_t areg_06 = 0x02; /* Auto de-emphasis, mannual channel mode */ + uint8_t areg_06 = 0x02; /* Auto de-emphasis, manual channel mode */ if (dev->radio) { tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00); diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c index 5127be71dd03..072210f5f92f 100644 --- a/drivers/media/usb/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -180,7 +180,7 @@ static int copy_streams(u8 *data, unsigned long len, field = (header >> 11) & 0x1; line = (header >> 12) & 0x1ff; cmd = (header >> 21) & 0x7; - /* Validates haeder fields */ + /* Validates header fields */ if (size > TM6000_URB_MSG_LEN) size = TM6000_URB_MSG_LEN; pktsize = TM6000_URB_MSG_LEN; diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c index 6eb84cf007b4..4db7a013e049 100644 --- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c @@ -306,7 +306,7 @@ static int ttusb_boot_dsp(struct ttusb *ttusb) b[3] = 28; /* upload dsp code in 32 byte steps (36 didn't work for me ...) */ - /* 32 is max packet size, no messages should be splitted. */ + /* 32 is max packet size, no messages should be split. */ for (i = 0; i < fw->size; i += 28) { memcpy(&b[4], &fw->data[i], 28); diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c index 44ca66cb9b8f..897ef5e1da71 100644 --- a/drivers/media/usb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c @@ -284,7 +284,7 @@ static void ttusb_dec_handle_irq( struct urb *urb) * * this is an fact a bit too simple implementation; * the box also reports a keyrepeat signal - * (with buffer[3] == 0x40) in an intervall of ~100ms. + * (with buffer[3] == 0x40) in an interval of ~100ms. * But to handle this correctly we had to imlemenent some * kind of timer which signals a 'key up' event if no * keyrepeat signal is received for lets say 200ms. diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c index 2b843a7b27a4..92d166bf8c12 100644 --- a/drivers/media/usb/usbvision/usbvision-core.c +++ b/drivers/media/usb/usbvision/usbvision-core.c @@ -900,7 +900,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio if ((frame->curline + 1) >= frame->frmheight) return parse_state_next_frame; - block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks splitted into different lines? */ + block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks split into different lines? */ y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size) + block_split * uv_block_size; @@ -1865,7 +1865,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision) value[4] = 0xA2; /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */ value[5] = 0x00; /* Reg.49 DVI_YUV This has nothing to do with compression */ - /* catched values for NT1004 */ + /* caught values for NT1004 */ /* value[0] = 0xFF; Never apply intra mode automatically */ /* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */ /* value[2] = 0x01; Force intra mode on all new frames */ @@ -1943,7 +1943,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision) /* SAA7113 uses 8 bit output */ value[0] = USBVISION_8_422_SYNC; } else { - /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses + /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 using sync pulses * as that is how saa7111 is configured */ value[0] = USBVISION_16_422_SYNC; /* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/ @@ -2146,7 +2146,7 @@ int usbvision_power_on(struct usb_usbvision *usbvision) /* * usbvision_begin_streaming() - * Sure you have to put bit 7 to 0, if not incoming frames are droped, but no + * Sure you have to put bit 7 to 0, if not incoming frames are dropped, but no * idea about the rest */ int usbvision_begin_streaming(struct usb_usbvision *usbvision) diff --git a/drivers/media/usb/usbvision/usbvision.h b/drivers/media/usb/usbvision/usbvision.h index d55088b4fd63..668167f8951d 100644 --- a/drivers/media/usb/usbvision/usbvision.h +++ b/drivers/media/usb/usbvision/usbvision.h @@ -135,11 +135,11 @@ #define MIN_FRAME_WIDTH 64 #define MAX_USB_WIDTH 320 /* 384 */ -#define MAX_FRAME_WIDTH 320 /* 384 */ /* streching sometimes causes crashes*/ +#define MAX_FRAME_WIDTH 320 /* 384 */ /* stretching sometimes causes crashes*/ #define MIN_FRAME_HEIGHT 48 #define MAX_USB_HEIGHT 240 /* 288 */ -#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Streching sometimes causes crashes*/ +#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Stretching sometimes causes crashes*/ #define MAX_FRAME_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL) #define USBVISION_CLIPMASK_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */ @@ -177,7 +177,7 @@ enum { * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128) * R = 1.164*(Y-16) + 1.596*(U-128) * - * If you fancy integer arithmetics (as you should), hear this: + * If you fancy integer arithmetic (as you should), hear this: * * 65536*B = 76284*(Y-16) + 132252*(V-128) * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128) @@ -438,7 +438,7 @@ struct usb_usbvision { int last_compr_level; /* How strong (100) or weak (0) was compression */ int usb_bandwidth; /* Mbit/s */ - /* Statistics that can be overlayed on the screen */ + /* Statistics that can be overlaid on the screen */ unsigned long isoc_urb_count; /* How many URBs we received so far */ unsigned long urb_length; /* Length of last URB */ unsigned long isoc_data_count; /* How many bytes we received */ diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index e314657a1843..182dcac49aa3 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -2008,7 +2008,7 @@ int uvc_video_init(struct uvc_streaming *stream) usb_set_interface(stream->dev->udev, stream->intfnum, 0); /* Set the streaming probe control with default streaming parameters - * retrieved from the device. Webcams that don't suport GET_DEF + * retrieved from the device. Webcams that don't support GET_DEF * requests on the probe control will just keep their current streaming * parameters. */ diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c index 51aad2cf742f..96fee8d5b865 100644 --- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -2,7 +2,7 @@ * Zoran 364xx based USB webcam module version 0.73 * * Allows you to use your USB webcam with V4L2 applications - * This is still in heavy developpement ! + * This is still in heavy development ! * * Copyright (C) 2004 Antoine Jacquet * http://royale.zerezo.com/zr364xx/