@@ -62,9 +62,9 @@
#include "ia_css_mmu_private.h" /* sh_css_mmu_set_page_table_base_index() */
#include "gdc_device.h" /* HRT_GDC_N */
#include "dma.h" /* dma_set_max_burst_size() */
-#include "irq.h" /* virq */
-#include "sp.h" /* cnd_sp_irq_enable() */
-#include "isp.h" /* cnd_isp_irq_enable, ISP_VEC_NELEMS */
+#include "irq.h" /* virq */
+#include "sp.h" /* cnd_sp_irq_enable() */
+#include "isp.h" /* cnd_isp_irq_enable, ISP_VEC_NELEMS */
#include "gp_device.h" /* gp_device_reg_store() */
#define __INLINE_GPIO__
#include "gpio.h"
@@ -97,8 +97,9 @@ static int thread_alive;
/* Size of Refcount List */
#define REFCOUNT_SIZE 1000
-/* for JPEG, we don't know the length of the image upfront,
- * but since we support sensor upto 16MP, we take this as
+/*
+ * for JPEG, we don't know the length of the image upfront,
+ * but since we support sensor up to 16MP, we take this as
* upper limit.
*/
#define JPEG_BYTES (16 * 1024 * 1024)
@@ -110,9 +111,10 @@ struct sh_css my_css;
int __printf(1, 0) (*sh_css_printf)(const char *fmt, va_list args) = NULL;
-/* modes of work: stream_create and stream_destroy will update the save/restore data
- only when in working mode, not suspend/resume
-*/
+/*
+ * modes of work: stream_create and stream_destroy will update the save/restore
+ * data only when in working mode, not suspend/resume
+ */
enum ia_sh_css_modes {
sh_css_mode_none = 0,
sh_css_mode_working,
@@ -120,40 +122,55 @@ enum ia_sh_css_modes {
sh_css_mode_resume
};
-/* a stream seed, to save and restore the stream data.
- the stream seed contains all the data required to "grow" the seed again after it was closed.
+/**
+ * struct sh_css_stream_seed - a stream seed, to save and restore the
+ * stream data.
+ *
+ * @orig_stream: pointer to restore the original handle
+ * @stream: handle, used as ID too.
+ * @stream_config: stream config struct
+ * @num_pipes: number of pipes
+ * @pipes: pipe handles
+ * @orig_pipes: pointer to restore original handle
+ * @pipe_config: pipe config structs
+ *
+ * the stream seed contains all the data required to "grow" the seed again
+ * after it was closed.
*/
struct sh_css_stream_seed {
- struct ia_css_stream
- **orig_stream; /* pointer to restore the original handle */
- struct ia_css_stream *stream; /* handle, used as ID too.*/
- struct ia_css_stream_config stream_config; /* stream config struct */
+ struct ia_css_stream **orig_stream;
+ struct ia_css_stream *stream;
+ struct ia_css_stream_config stream_config;
int num_pipes;
- struct ia_css_pipe *pipes[IA_CSS_PIPE_ID_NUM]; /* pipe handles */
- struct ia_css_pipe
- **orig_pipes[IA_CSS_PIPE_ID_NUM]; /* pointer to restore original handle */
- struct ia_css_pipe_config
- pipe_config[IA_CSS_PIPE_ID_NUM]; /* pipe config structs */
+ struct ia_css_pipe *pipes[IA_CSS_PIPE_ID_NUM];
+ struct ia_css_pipe **orig_pipes[IA_CSS_PIPE_ID_NUM];
+ struct ia_css_pipe_config pipe_config[IA_CSS_PIPE_ID_NUM];
};
#define MAX_ACTIVE_STREAMS 5
-/* A global struct for save/restore to hold all the data that should sustain power-down:
- MMU base, IRQ type, env for routines, binary loaded FW and the stream seeds.
-*/
+/*
+ * A global struct for save/restore to hold all the data that should
+ * sustain power-down: MMU base, IRQ type, env for routines, binary loaded FW
+ * and the stream seeds.
+ */
struct sh_css_save {
enum ia_sh_css_modes mode;
- u32 mmu_base; /* the last mmu_base */
+ u32 mmu_base; /* the last mmu_base */
enum ia_css_irq_type irq_type;
struct sh_css_stream_seed stream_seeds[MAX_ACTIVE_STREAMS];
- struct ia_css_fw *loaded_fw; /* fw struct previously loaded */
- struct ia_css_env driver_env; /* driver-supplied env copy */
+ struct ia_css_fw *loaded_fw; /* fw struct previously loaded */
+ struct ia_css_env driver_env; /* driver-supplied env copy */
};
static bool my_css_save_initialized; /* if my_css_save was initialized */
static struct sh_css_save my_css_save;
-/* pqiao NOTICE: this is for css internal buffer recycling when stopping pipeline,
- this array is temporary and will be replaced by resource manager*/
+/*
+ * pqiao NOTICE: this is for css internal buffer recycling when stopping
+ * pipeline,
+ * this array is temporary and will be replaced by resource manager
+ */
+
/* Taking the biggest Size for number of Elements */
#define MAX_HMM_BUFFER_NUM \
(SH_CSS_MAX_NUM_QUEUES * (IA_CSS_NUM_ELEMS_SP2HOST_BUFFER_QUEUE + 2))
@@ -443,9 +460,10 @@ static enum ia_css_frame_format yuv422_copy_formats[] = {
IA_CSS_FRAME_FORMAT_YUYV
};
-/* Verify whether the selected output format is can be produced
+/*
+ * Verify whether the selected output format is can be produced
* by the copy binary given the stream format.
- * */
+ */
static int
verify_copy_out_frame_format(struct ia_css_pipe *pipe)
{
@@ -682,13 +700,13 @@ static unsigned int csi2_protocol_calculate_max_subpixels_per_line(
/*
* The frame format layout is shown below.
*
- * Line 0: Pixel Pixel ... Pixel
- * Line 1: Pixel Pixel ... Pixel
- * Line 2: Pixel Pixel ... Pixel
- * Line 3: Pixel Pixel ... Pixel
+ * Line 0: Pixel ... Pixel
+ * Line 1: Pixel ... Pixel
+ * Line 2: Pixel ... Pixel
+ * Line 3: Pixel ... Pixel
* ...
- * Line (n-2): Pixel Pixel ... Pixel
- * Line (n-1): Pixel Pixel ... Pixel
+ * Line (n-2): Pixel ... Pixel
+ * Line (n-1): Pixel ... Pixel
*
* In this frame format, the even-line is
* as wide as the odd-line.
@@ -899,8 +917,10 @@ static bool sh_css_translate_stream_cfg_to_input_system_input_port_attr(
isys_stream_descr->metadata.lines_per_frame =
stream_cfg->metadata_config.resolution.height;
#ifdef ISP2401
- /* For new input system, number of str2mmio requests must be even.
- * So we round up number of metadata lines to be even. */
+ /*
+ * For new input system, number of str2mmio requests must be even.
+ * So we round up number of metadata lines to be even.
+ */
if (isys_stream_descr->metadata.lines_per_frame > 0)
isys_stream_descr->metadata.lines_per_frame +=
(isys_stream_descr->metadata.lines_per_frame & 1);
@@ -1067,7 +1087,8 @@ sh_css_config_input_network(struct ia_css_stream *stream)
binary = pipe->pipeline.stages->binary;
if (binary) {
- /* this was being done in ifmtr in 2400.
+ /*
+ * this was being done in ifmtr in 2400.
* online and cont bypass the init_in_frameinfo_memory_defaults
* so need to do it here
*/
@@ -1546,17 +1567,18 @@ ia_css_reset_defaults(struct sh_css *css)
/* Reset everything to zero */
memset(&default_css, 0, sizeof(default_css));
- /* Initialize the non zero values*/
+ /* Initialize the non zero values */
default_css.check_system_idle = true;
default_css.num_cont_raw_frames = NUM_CONTINUOUS_FRAMES;
- /* All should be 0: but memset does it already.
+ /*
+ * All should be 0: but memset does it already.
* default_css.num_mipi_frames[N_CSI_PORTS] = 0;
*/
default_css.irq_type = IA_CSS_IRQ_TYPE_EDGE;
- /*Set the defaults to the output */
+ /* Set the defaults to the output */
*css = default_css;
}
@@ -1619,6 +1641,7 @@ ia_css_init(struct device *dev, const struct ia_css_env *env,
* the SIZE_OF_XXX macro of the corresponding struct. If they are not
* equal, functionality will break.
*/
+
/* Check struct sh_css_ddr_address_map */
COMPILATION_ERROR_IF(sizeof(struct sh_css_ddr_address_map) != SIZE_OF_SH_CSS_DDR_ADDRESS_MAP_STRUCT);
/* Check struct host_sp_queues */
@@ -1688,8 +1711,11 @@ ia_css_init(struct device *dev, const struct ia_css_env *env,
mipi_init();
#ifndef ISP2401
- /* In case this has been programmed already, update internal
- data structure ... DEPRECATED */
+ /*
+ * In case this has been programmed already, update internal
+ * data structure ...
+ * DEPRECATED
+ */
my_css.page_table_base_index = mmu_get_page_table_base_index(MMU0_ID);
#endif
@@ -1752,12 +1778,13 @@ ia_css_init(struct device *dev, const struct ia_css_env *env,
IA_CSS_LEAVE_ERR(-EBUSY);
return -EBUSY;
}
- /* can be called here, queuing works, but:
- - when sp is started later, it will wipe queued items
- so for now we leave it for later and make sure
- updates are not called to frequently.
- sh_css_init_buffer_queues();
- */
+ /*
+ * can be called here, queuing works, but:
+ * - when sp is started later, it will wipe queued items
+ * so for now we leave it for later and make sure
+ * updates are not called to frequently.
+ * sh_css_init_buffer_queues();
+ */
#if defined(ISP2401)
gp_device_reg_store(GP_DEVICE0_ID, _REG_GP_SWITCH_ISYS2401_ADDR, 1);
@@ -1798,10 +1825,12 @@ sh_css_flush(struct ia_css_acc_fw *fw)
my_css.flush(fw);
}
-/* Mapping sp threads. Currently, this is done when a stream is created and
+/*
+ * Mapping sp threads. Currently, this is done when a stream is created and
* pipelines are ready to be converted to sp pipelines. Be careful if you are
* doing it from stream_create since we could run out of sp threads due to
- * allocation on inactive pipelines. */
+ * allocation on inactive pipelines.
+ */
static int
map_sp_threads(struct ia_css_stream *stream, bool map)
{
@@ -1865,8 +1894,10 @@ map_sp_threads(struct ia_css_stream *stream, bool map)
return err;
}
-/* creates a host pipeline skeleton for all pipes in a stream. Called during
- * stream_create. */
+/*
+ * creates a host pipeline skeleton for all pipes in a stream. Called during
+ * stream_create.
+ */
static int
create_host_pipeline_structure(struct ia_css_stream *stream)
{
@@ -1965,8 +1996,10 @@ create_host_pipeline_structure(struct ia_css_stream *stream)
return err;
}
-/* creates a host pipeline for all pipes in a stream. Called during
- * stream_start. */
+/*
+ * creates a host pipeline for all pipes in a stream. Called during
+ * stream_start.
+ */
static int
create_host_pipeline(struct ia_css_stream *stream)
{
@@ -1986,15 +2019,25 @@ create_host_pipeline(struct ia_css_stream *stream)
main_pipe = stream->last_pipe;
pipe_id = main_pipe->mode;
- /* No continuous frame allocation for capture pipe. It uses the
- * "main" pipe's frames. */
+ /*
+ * No continuous frame allocation for capture pipe. It uses the
+ * "main" pipe's frames.
+ */
if ((pipe_id == IA_CSS_PIPE_ID_PREVIEW) ||
(pipe_id == IA_CSS_PIPE_ID_VIDEO)) {
- /* About pipe_id == IA_CSS_PIPE_ID_PREVIEW && stream->config.mode != IA_CSS_INPUT_MODE_MEMORY:
- * The original condition pipe_id == IA_CSS_PIPE_ID_PREVIEW is too strong. E.g. in SkyCam (with memory
- * based input frames) there is no continuous mode and thus no need for allocated continuous frames
- * This is not only for SkyCam but for all preview cases that use DDR based input frames. For this
- * reason the stream->config.mode != IA_CSS_INPUT_MODE_MEMORY has beed added.
+ /*
+ * About
+ * pipe_id == IA_CSS_PIPE_ID_PREVIEW &&
+ * stream->config.mode != IA_CSS_INPUT_MODE_MEMORY:
+ *
+ * The original condition pipe_id == IA_CSS_PIPE_ID_PREVIEW is
+ * too strong. E.g. in SkyCam (with memory based input frames)
+ * there is no continuous mode and thus no need for allocated
+ * continuous frames.
+ * This is not only for SkyCam but for all preview cases that
+ * use DDR based input frames. For this reason the
+ * stream->config.mode != IA_CSS_INPUT_MODE_MEMORY has beed
+ * added.
*/
if (stream->config.continuous ||
(pipe_id == IA_CSS_PIPE_ID_PREVIEW &&
@@ -2204,7 +2247,7 @@ pipe_generate_pipe_num(const struct ia_css_pipe *pipe,
/* Assign a new pipe_num .... search for empty place */
for (i = 0; i < IA_CSS_PIPELINE_NUM_MAX; i++) {
if (!my_css.all_pipes[i]) {
- /*position is reserved */
+ /* position is reserved */
my_css.all_pipes[i] = (struct ia_css_pipe *)pipe;
pipe_num = i;
break;
@@ -2321,8 +2364,10 @@ ia_css_pipe_destroy(struct ia_css_pipe *pipe)
switch (pipe->config.mode) {
case IA_CSS_PIPE_MODE_PREVIEW:
- /* need to take into account that this function is also called
- on the internal copy pipe */
+ /*
+ * need to take into account that this function is also called
+ * on the internal copy pipe
+ */
if (pipe->mode == IA_CSS_PIPE_ID_PREVIEW) {
ia_css_frame_free_multiple(NUM_CONTINUOUS_FRAMES,
pipe->continuous_frames);
@@ -2454,8 +2499,10 @@ int ia_css_irq_translate(
switch (irq) {
case virq_sp:
- /* When SP goes to idle, info is available in the
- * event queue. */
+ /*
+ * When SP goes to idle, info is available in the
+ * event queue.
+ */
infos |= IA_CSS_IRQ_INFO_EVENTS_READY;
break;
case virq_isp:
@@ -2563,8 +2610,10 @@ sh_css_get_sw_interrupt_value(unsigned int irq)
return irq_value;
}
-/* configure and load the copy binary, the next binary is used to
- determine whether the copy binary needs to do left padding. */
+/*
+ * configure and load the copy binary, the next binary is used to
+ * determine whether the copy binary needs to do left padding.
+ */
static int load_copy_binary(
struct ia_css_pipe *pipe,
struct ia_css_binary *copy_binary,
@@ -2761,7 +2810,8 @@ load_preview_binaries(struct ia_css_pipe *pipe)
if (err)
return err;
- /* Note: the current selection of vf_pp binary and
+ /*
+ * Note: the current selection of vf_pp binary and
* parameterization of the preview binary contains a few pieces
* of hardcoded knowledge. This needs to be cleaned up such that
* the binary selection becomes more generic.
@@ -2774,7 +2824,7 @@ load_preview_binaries(struct ia_css_pipe *pipe)
* The decision if the vf_pp binary is needed for YUV downscaling is
* made after the preview binary selection, since some preview binaries
* can perform the requested YUV downscaling.
- * */
+ */
need_vf_pp = pipe->config.enable_dz;
need_vf_pp |= pipe_out_info->format != IA_CSS_FRAME_FORMAT_YUV_LINE &&
!(pipe_out_info->format == IA_CSS_FRAME_FORMAT_NV12 ||
@@ -2786,11 +2836,12 @@ load_preview_binaries(struct ia_css_pipe *pipe)
prev_vf_info = pipe->vf_yuv_ds_input_info;
else
prev_vf_info = *pipe_out_info;
- /* If vf_pp is needed, then preview must output yuv_line.
+ /*
+ * If vf_pp is needed, then preview must output yuv_line.
* The exception is when vf_pp is manually disabled, that is only
* used in combination with a pipeline extension that requires
* yuv_line as input.
- * */
+ */
if (need_vf_pp)
ia_css_frame_info_set_format(&prev_vf_info,
IA_CSS_FRAME_FORMAT_YUV_LINE);
@@ -2823,7 +2874,8 @@ load_preview_binaries(struct ia_css_pipe *pipe)
need_vf_pp |= mycs->preview_binary.out_frame_info[0].res.width != pipe_out_info->res.width;
need_vf_pp |= mycs->preview_binary.out_frame_info[0].res.height != pipe_out_info->res.height;
- /* When vf_pp is needed, then the output format of the selected
+ /*
+ * When vf_pp is needed, then the output format of the selected
* preview binary must be yuv_line. If this is not the case,
* then the preview binary selection is done again.
*/
@@ -2867,12 +2919,14 @@ load_preview_binaries(struct ia_css_pipe *pipe)
}
#ifdef ISP2401
- /* When the input system is 2401, only the Direct Sensor Mode
+ /*
+ * When the input system is 2401, only the Direct Sensor Mode
* Offline Preview uses the ISP copy binary.
*/
need_isp_copy_binary = !online && sensor;
#else
- /* About pipe->stream->config.mode == IA_CSS_INPUT_MODE_MEMORY:
+ /*
+ * About pipe->stream->config.mode == IA_CSS_INPUT_MODE_MEMORY:
* This is typical the case with SkyCam (which has no input system) but it also applies to all cases
* where the driver chooses for memory based input frames. In these cases, a copy binary (which typical
* copies sensor data to DDR) does not have much use.
@@ -3226,8 +3280,10 @@ get_crop_columns_for_bayer_order(const struct ia_css_stream_config *config)
return 0;
}
-/* This function is to get the sum of all extra pixels in addition to the effective
- * input, it includes dvs envelop and filter run-in */
+/*
+ * This function is to get the sum of all extra pixels in addition to the effective
+ * input, it includes dvs envelop and filter run-in
+ */
static void get_pipe_extra_pixel(struct ia_css_pipe *pipe,
unsigned int *extra_row, unsigned int *extra_column)
{
@@ -3236,7 +3292,8 @@ static void get_pipe_extra_pixel(struct ia_css_pipe *pipe,
unsigned int i;
struct ia_css_resolution dvs_env = pipe->config.dvs_envelope;
- /* The dvs envelope info may not be correctly sent down via pipe config
+ /*
+ * The dvs envelope info may not be correctly sent down via pipe config
* The check is made and the correct value is populated in the binary info
* Use this value when computing crop, else excess lines may get trimmed
*/
@@ -3330,7 +3387,8 @@ ia_css_get_crop_offsets(
* 2. Require the special support for the online use cases.
*/
- /* ISP expects GRBG bayer order, we skip one line and/or one row
+ /*
+ * ISP expects GRBG bayer order, we skip one line and/or one row
* to correct in case the input bayer order is different.
*/
column += get_crop_columns_for_bayer_order(&pipe->stream->config);
@@ -3448,7 +3506,8 @@ static int create_host_video_pipeline(struct ia_css_pipe *pipe)
me->dvs_frame_delay = pipe->dvs_frame_delay;
#ifdef ISP2401
- /* When the input system is 2401, always enable 'in_frameinfo_memory'
+ /*
+ * When the input system is 2401, always enable 'in_frameinfo_memory'
* except for the following: online or continuous
*/
need_in_frameinfo_memory = !(pipe->stream->config.online ||
@@ -3504,7 +3563,8 @@ static int create_host_video_pipeline(struct ia_css_pipe *pipe)
in_frame = me->stages->args.out_frame[0];
} else if (pipe->stream->config.continuous) {
#ifdef ISP2401
- /* When continuous is enabled, configure in_frame with the
+ /*
+ * When continuous is enabled, configure in_frame with the
* last pipe, which is the copy pipe.
*/
in_frame = pipe->stream->last_pipe->continuous_frames[0];
@@ -3516,8 +3576,10 @@ static int create_host_video_pipeline(struct ia_css_pipe *pipe)
ia_css_pipe_util_set_output_frames(out_frames, 0,
need_yuv_pp ? NULL : out_frame);
- /* when the video binary supports a second output pin,
- it can directly produce the vf_frame. */
+ /*
+ * when the video binary supports a second output pin,
+ * it can directly produce the vf_frame.
+ */
if (need_vf_pp) {
ia_css_pipe_get_generic_stage_desc(&stage_desc, video_binary,
out_frames, in_frame, NULL);
@@ -3689,7 +3751,8 @@ create_host_preview_pipeline(struct ia_css_pipe *pipe)
ia_css_pipeline_clean(me);
#ifdef ISP2401
- /* When the input system is 2401, always enable 'in_frameinfo_memory'
+ /*
+ * When the input system is 2401, always enable 'in_frameinfo_memory'
* except for the following:
* - Direct Sensor Mode Online Preview
* - Buffered Sensor Mode Online Preview
@@ -3738,7 +3801,8 @@ create_host_preview_pipeline(struct ia_css_pipe *pipe)
in_frame = me->stages->args.out_frame[0];
} else if (pipe->stream->config.continuous) {
#ifdef ISP2401
- /* When continuous is enabled, configure in_frame with the
+ /*
+ * When continuous is enabled, configure in_frame with the
* last pipe, which is the copy pipe.
*/
if (continuous || !online)
@@ -3877,8 +3941,10 @@ preview_start(struct ia_css_pipe *pipe)
coord,
params);
- /* make the preview pipe start with mem mode input, copy handles
- the actual mode */
+ /*
+ * make the preview pipe start with mem mode input, copy handles
+ * the actual mode
+ */
preview_pipe_input_mode = IA_CSS_INPUT_MODE_MEMORY;
}
@@ -4096,8 +4162,10 @@ ia_css_pipe_enqueue_buffer(struct ia_css_pipe *pipe,
}
for (stage = pipeline->stages; stage; stage = stage->next) {
- /* The SP will read the params
- after it got empty 3a and dis */
+ /*
+ * The SP will read the params after it got
+ * empty 3a and dis
+ */
if (STATS_ENABLED(stage)) {
/* there is a stage that needs it */
return_err = ia_css_bufq_enqueue_buffer(thread_id,
@@ -4163,7 +4231,7 @@ ia_css_pipe_enqueue_buffer(struct ia_css_pipe *pipe,
/*
* TODO: Free up the hmm memory space.
- */
+ */
int
ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
struct ia_css_buffer *buffer)
@@ -4230,7 +4298,8 @@ ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
hmm_buffer_record = sh_css_hmm_buffer_record_validate(
ddr_buffer_addr, buf_type);
if (hmm_buffer_record) {
- /* valid hmm_buffer_record found. Save the kernel_ptr
+ /*
+ * valid hmm_buffer_record found. Save the kernel_ptr
* for validation after performing hmm_load. The
* vbuf handle and buffer_record can be released.
*/
@@ -4248,7 +4317,8 @@ ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
&ddr_buffer,
sizeof(struct sh_css_hmm_buffer));
- /* if the kernel_ptr is 0 or an invalid, return an error.
+ /*
+ * if the kernel_ptr is 0 or an invalid, return an error.
* do not access the buffer via the kernal_ptr.
*/
if ((ddr_buffer.kernel_ptr == 0) ||
@@ -4262,8 +4332,11 @@ ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
}
if (ddr_buffer.kernel_ptr != 0) {
- /* buffer->exp_id : all instances to be removed later once the driver change
- * is completed. See patch #5758 for reference */
+ /*
+ * buffer->exp_id : all instances to be removed later
+ * once the driver change is completed. See patch #5758
+ * for reference
+ */
buffer->exp_id = 0;
buffer->driver_cookie = ddr_buffer.cookie_ptr;
buffer->timing_data = ddr_buffer.timing_data;
@@ -4279,8 +4352,10 @@ ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
case IA_CSS_BUFFER_TYPE_SEC_OUTPUT_FRAME:
if (pipe && pipe->stop_requested) {
#if !defined(ISP2401)
- /* free mipi frames only for old input system
- * for 2401 it is done in ia_css_stream_destroy call
+ /*
+ * free mipi frames only for old input
+ * system for 2401 it is done in
+ * ia_css_stream_destroy call
*/
return_err = free_mipi_frames(pipe);
if (return_err) {
@@ -4391,22 +4466,22 @@ ia_css_pipe_dequeue_buffer(struct ia_css_pipe *pipe,
* 4) "enum ia_css_event_type convert_event_sp_to_host_domain" (sh_css.c)
*/
static enum ia_css_event_type convert_event_sp_to_host_domain[] = {
- IA_CSS_EVENT_TYPE_OUTPUT_FRAME_DONE, /** Output frame ready. */
- IA_CSS_EVENT_TYPE_SECOND_OUTPUT_FRAME_DONE, /** Second output frame ready. */
- IA_CSS_EVENT_TYPE_VF_OUTPUT_FRAME_DONE, /** Viewfinder Output frame ready. */
- IA_CSS_EVENT_TYPE_SECOND_VF_OUTPUT_FRAME_DONE, /** Second viewfinder Output frame ready. */
- IA_CSS_EVENT_TYPE_3A_STATISTICS_DONE, /** Indication that 3A statistics are available. */
- IA_CSS_EVENT_TYPE_DIS_STATISTICS_DONE, /** Indication that DIS statistics are available. */
- IA_CSS_EVENT_TYPE_PIPELINE_DONE, /** Pipeline Done event, sent after last pipeline stage. */
- IA_CSS_EVENT_TYPE_FRAME_TAGGED, /** Frame tagged. */
- IA_CSS_EVENT_TYPE_INPUT_FRAME_DONE, /** Input frame ready. */
- IA_CSS_EVENT_TYPE_METADATA_DONE, /** Metadata ready. */
- IA_CSS_EVENT_TYPE_LACE_STATISTICS_DONE, /** Indication that LACE statistics are available. */
- IA_CSS_EVENT_TYPE_ACC_STAGE_COMPLETE, /** Extension stage executed. */
- IA_CSS_EVENT_TYPE_TIMER, /** Timing measurement data. */
- IA_CSS_EVENT_TYPE_PORT_EOF, /** End Of Frame event, sent when in buffered sensor mode. */
- IA_CSS_EVENT_TYPE_FW_WARNING, /** Performance warning encountered by FW */
- IA_CSS_EVENT_TYPE_FW_ASSERT, /** Assertion hit by FW */
+ IA_CSS_EVENT_TYPE_OUTPUT_FRAME_DONE, /* Output frame ready. */
+ IA_CSS_EVENT_TYPE_SECOND_OUTPUT_FRAME_DONE, /* Second output frame ready. */
+ IA_CSS_EVENT_TYPE_VF_OUTPUT_FRAME_DONE, /* Viewfinder Output frame ready. */
+ IA_CSS_EVENT_TYPE_SECOND_VF_OUTPUT_FRAME_DONE, /* Second viewfinder Output frame ready. */
+ IA_CSS_EVENT_TYPE_3A_STATISTICS_DONE, /* Indication that 3A statistics are available. */
+ IA_CSS_EVENT_TYPE_DIS_STATISTICS_DONE, /* Indication that DIS statistics are available. */
+ IA_CSS_EVENT_TYPE_PIPELINE_DONE, /* Pipeline Done event, sent after last pipeline stage. */
+ IA_CSS_EVENT_TYPE_FRAME_TAGGED, /* Frame tagged. */
+ IA_CSS_EVENT_TYPE_INPUT_FRAME_DONE, /* Input frame ready. */
+ IA_CSS_EVENT_TYPE_METADATA_DONE, /* Metadata ready. */
+ IA_CSS_EVENT_TYPE_LACE_STATISTICS_DONE, /* Indication that LACE statistics are available. */
+ IA_CSS_EVENT_TYPE_ACC_STAGE_COMPLETE, /* Extension stage executed. */
+ IA_CSS_EVENT_TYPE_TIMER, /* Timing measurement data. */
+ IA_CSS_EVENT_TYPE_PORT_EOF, /* End Of Frame event, sent when in buffered sensor mode. */
+ IA_CSS_EVENT_TYPE_FW_WARNING, /* Performance warning encountered by FW */
+ IA_CSS_EVENT_TYPE_FW_ASSERT, /* Assertion hit by FW */
0, /* error if sp passes SH_CSS_SP_EVENT_NR_OF_TYPES as a valid event. */
};
@@ -4417,13 +4492,15 @@ ia_css_dequeue_psys_event(struct ia_css_event *event)
u8 payload[4] = {0, 0, 0, 0};
int ret_err;
- /*TODO:
+ /*
+ * TODO:
* a) use generic decoding function , same as the one used by sp.
* b) group decode and dequeue into eventQueue module
*
* We skip the IA_CSS_ENTER logging call
* to avoid flooding the logs when the host application
- * uses polling. */
+ * uses polling.
+ */
if (!event)
return -EINVAL;
@@ -4442,9 +4519,11 @@ ia_css_dequeue_psys_event(struct ia_css_event *event)
ia_css_bufq_enqueue_psys_event(
IA_CSS_PSYS_SW_EVENT_EVENT_DEQUEUED, 0, 0, 0);
- /* Events are decoded into 4 bytes of payload, the first byte
+ /*
+ * Events are decoded into 4 bytes of payload, the first byte
* contains the sp event type. This is converted to a host enum.
- * TODO: can this enum conversion be eliminated */
+ * TODO: can this enum conversion be eliminated
+ */
event->type = convert_event_sp_to_host_domain[payload[0]];
/* Some sane default values since not all events use all fields. */
event->pipe = NULL;
@@ -4457,7 +4536,10 @@ ia_css_dequeue_psys_event(struct ia_css_event *event)
event->timer_subcode = 0;
if (event->type == IA_CSS_EVENT_TYPE_TIMER) {
- /* timer event ??? get the 2nd event and decode the data into the event struct */
+ /*
+ * timer event ??? get the 2nd event and decode the data
+ * into the event struct
+ */
u32 tmp_data;
/* 1st event: LSB 16-bit timer data and code */
event->timer_data = ((payload[1] & 0xFF) | ((payload[3] & 0xFF) << 8));
@@ -4466,8 +4548,10 @@ ia_css_dequeue_psys_event(struct ia_css_event *event)
ret_err = ia_css_bufq_dequeue_psys_event(payload);
if (ret_err) {
/* no 2nd event ??? an error */
- /* Putting IA_CSS_ERROR is resulting in failures in
- * Merrifield smoke testing */
+ /*
+ * Putting IA_CSS_ERROR is resulting in failures in
+ * Merrifield smoke testing
+ */
IA_CSS_WARNING("Timer: Error de-queuing the 2nd TIMER event!!!\n");
return ret_err;
}
@@ -4481,11 +4565,15 @@ ia_css_dequeue_psys_event(struct ia_css_event *event)
event->timer_data |= (tmp_data << 16);
event->timer_subcode = payload[2];
} else {
- /* It's a non timer event. So clear first half of the timer event data.
- * If the second part of the TIMER event is not received, we discard
- * the first half of the timer data and process the non timer event without
- * affecting the flow. So the non timer event falls through
- * the code. */
+ /*
+ * It's a non timer event. So clear first half of the
+ * timer event data.
+ * If the second part of the TIMER event is not
+ * received, we discard the first half of the timer
+ * data and process the non timer event without
+ * affecting the flow. So the non timer event falls
+ * through the code.
+ */
event->timer_data = 0;
event->timer_code = 0;
event->timer_subcode = 0;
@@ -4506,9 +4594,11 @@ ia_css_dequeue_psys_event(struct ia_css_event *event)
event->fw_assert_line_no = (payload[2] << 8) + payload[3];
/* payload[2] is line_no>>8, payload[3] is line_no&0xff */
} else if (event->type != IA_CSS_EVENT_TYPE_TIMER) {
- /* pipe related events.
+ /*
+ * pipe related events.
* payload[1] contains the pipe_num,
- * payload[2] contains the pipe_id. These are different. */
+ * payload[2] contains the pipe_id. These are different.
+ */
event->pipe = find_pipe_by_num(payload[1]);
pipe_id = (enum ia_css_pipe_id)payload[2];
/* Check to see if pipe still exists */
@@ -4560,9 +4650,11 @@ ia_css_dequeue_isys_event(struct ia_css_event *event)
u8 payload[4] = {0, 0, 0, 0};
int err = 0;
- /* We skip the IA_CSS_ENTER logging call
+ /*
+ * We skip the IA_CSS_ENTER logging call
* to avoid flooding the logs when the host application
- * uses polling. */
+ * uses polling.
+ */
if (!event)
return -EINVAL;
@@ -4686,7 +4778,8 @@ sh_css_pipe_start(struct ia_css_stream *stream)
return err;
}
- /* Force ISP parameter calculation after a mode change
+ /*
+ * Force ISP parameter calculation after a mode change
* Acceleration API examples pass NULL for stream but they
* don't use ISP parameters anyway. So this should be okay.
* The SP binary (jpeg) copy does not use any parameters.
@@ -5103,11 +5196,13 @@ sh_css_pipe_get_shading_info(struct ia_css_pipe *pipe,
(const struct ia_css_stream_config *)&pipe->stream->config,
shading_info, pipe_config);
- /* Other function calls can be added here when other shading correction types will be added
- * in the future.
+ /*
+ * Other function calls can be added here when other shading
+ * correction types will be added in the future.
*/
} else {
- /* When the pipe does not have a binary which has the shading
+ /*
+ * When the pipe does not have a binary which has the shading
* correction, this function does not need to fill the shading
* information. It is not a error case, and then
* this function should return 0.
@@ -5220,7 +5315,8 @@ static int load_video_binaries(struct ia_css_pipe *pipe)
IA_CSS_ENTER_PRIVATE("");
assert(pipe);
assert(pipe->mode == IA_CSS_PIPE_ID_VIDEO);
- /* we only test the video_binary because offline video doesn't need a
+ /*
+ * we only test the video_binary because offline video doesn't need a
* vf_pp binary and online does not (always use) the copy_binary.
* All are always reset at the same time anyway.
*/
@@ -5333,7 +5429,8 @@ static int load_video_binaries(struct ia_css_pipe *pipe)
if (err)
return err;
- /* In the case where video_vf_info is not NULL, this allows
+ /*
+ * In the case where video_vf_info is not NULL, this allows
* us to find a potential video library with desired vf format.
* If success, no vf_pp binary is needed.
* If failed, we will look up video binary with YUV_LINE vf format
@@ -5348,17 +5445,23 @@ static int load_video_binaries(struct ia_css_pipe *pipe)
else
return err;
} else if (video_vf_info) {
- /* The first video binary lookup is successful, but we may
- * still need vf_pp binary based on additiona check */
+ /*
+ * The first video binary lookup is successful, but we
+ * may still need vf_pp binary based on additional check
+ */
num_output_pins = mycs->video_binary.info->num_output_pins;
vf_ds_log2 = mycs->video_binary.vf_downscale_log2;
- /* If the binary has dual output pins, we need vf_pp if the resolution
- * is different. */
+ /*
+ * If the binary has dual output pins, we need vf_pp
+ * if the resolution is different.
+ */
need_vf_pp |= ((num_output_pins == 2) && vf_res_different_than_output);
- /* If the binary has single output pin, we need vf_pp if additional
- * scaling is needed for vf */
+ /*
+ * If the binary has single output pin, we need vf_pp
+ * if additional scaling is needed for vf
+ */
need_vf_pp |= ((num_output_pins == 1) &&
((video_vf_info->res.width << vf_ds_log2 != pipe_out_info->res.width) ||
(video_vf_info->res.height << vf_ds_log2 != pipe_out_info->res.height)));
@@ -5388,19 +5491,25 @@ static int load_video_binaries(struct ia_css_pipe *pipe)
}
}
- /* If a video binary does not use a ref_frame, we set the frame delay
- * to 0. This is the case for the 1-stage low-power video binary. */
+ /*
+ * If a video binary does not use a ref_frame, we set the frame delay
+ * to 0. This is the case for the 1-stage low-power video binary.
+ */
if (!mycs->video_binary.info->sp.enable.ref_frame)
pipe->dvs_frame_delay = 0;
- /* The delay latency determines the number of invalid frames after
- * a stream is started. */
+ /*
+ * The delay latency determines the number of invalid frames after
+ * a stream is started.
+ */
pipe->num_invalid_frames = pipe->dvs_frame_delay;
pipe->info.num_invalid_frames = pipe->num_invalid_frames;
- /* Viewfinder frames also decrement num_invalid_frames. If the pipe
+ /*
+ * Viewfinder frames also decrement num_invalid_frames. If the pipe
* outputs a viewfinder output, then we need double the number of
- * invalid frames */
+ * invalid frames
+ */
if (video_vf_info)
pipe->num_invalid_frames *= 2;
@@ -5412,7 +5521,8 @@ static int load_video_binaries(struct ia_css_pipe *pipe)
#if !defined(ISP2401)
/* Copy */
if (!online && !continuous) {
- /* TODO: what exactly needs doing, prepend the copy binary to
+ /*
+ * TODO: what exactly needs doing, prepend the copy binary to
* video base this only on !online?
*/
err = load_copy_binary(pipe,
@@ -5435,8 +5545,11 @@ static int load_video_binaries(struct ia_css_pipe *pipe)
&mycs->video_binary.vf_frame_info,
pipe_vf_out_info);
} else {
- /* output from main binary is not yuv line. currently this is
- * possible only when bci is enabled on vfpp output */
+ /*
+ * output from main binary is not yuv line. currently
+ * this is possible only when bci is enabled on vfpp
+ * output
+ */
assert(pipe->config.enable_vfpp_bci);
ia_css_pipe_get_yuvscaler_binarydesc(pipe, &vf_pp_descr,
&mycs->video_binary.vf_frame_info,
@@ -5598,8 +5711,10 @@ static int video_start(struct ia_css_pipe *pipe)
coord,
params);
- /* make the video pipe start with mem mode input, copy handles
- the actual mode */
+ /*
+ * make the video pipe start with mem mode input, copy handles
+ * the actual mode
+ */
video_pipe_input_mode = IA_CSS_INPUT_MODE_MEMORY;
}
@@ -5857,9 +5972,11 @@ static int load_primary_binaries(
}
need_pp = need_capture_pp(pipe);
- /* we use the vf output info to get the primary/capture_pp binary
- configured for vf_veceven. It will select the closest downscaling
- factor. */
+ /*
+ * we use the vf output info to get the primary/capture_pp binary
+ * configured for vf_veceven. It will select the closest downscaling
+ * factor.
+ */
vf_info = *pipe_vf_out_info;
/*
@@ -5871,13 +5988,15 @@ static int load_primary_binaries(
* required. This should not be considered as a clean solution.
* Proper investigation should be done to come up with the clean
* solution.
- * */
+ */
ia_css_frame_info_set_format(&vf_info, IA_CSS_FRAME_FORMAT_YUV_LINE);
- /* TODO: All this yuv_scaler and capturepp calculation logic
+ /*
+ * TODO: All this yuv_scaler and capturepp calculation logic
* can be shared later. Capture_pp is also a yuv_scale binary
* with extra XNR funcionality. Therefore, it can be made as the
- * first step of the cascade. */
+ * first step of the cascade.
+ */
capt_pp_out_info = pipe->out_yuv_ds_input_info;
capt_pp_out_info.format = IA_CSS_FRAME_FORMAT_YUV420;
capt_pp_out_info.res.width /= MAX_PREFERRED_YUV_DS_PER_STEP;
@@ -6023,15 +6142,15 @@ static int load_primary_binaries(
vf_pp_in_info = &mycs->primary_binary[mycs->num_primary_stage - 1].vf_frame_info;
/*
- * WARNING: The #if def flag has been added below as a
- * temporary solution to solve the problem of enabling the
- * view finder in a single binary in a capture flow. The
- * vf-pp stage has been removed for Skycam in the solution
- * provided. The vf-pp stage should be re-introduced when
- * required. Thisshould not be considered as a clean solution.
- * Proper * investigation should be done to come up with the clean
- * solution.
- * */
+ * WARNING: The #if def flag has been added below as a
+ * temporary solution to solve the problem of enabling the
+ * view finder in a single binary in a capture flow. The
+ * vf-pp stage has been removed for Skycam in the solution
+ * provided. The vf-pp stage should be re-introduced when
+ * required. Thisshould not be considered as a clean solution.
+ * Proper * investigation should be done to come up with the clean
+ * solution.
+ */
if (pipe->enable_viewfinder[IA_CSS_PIPE_OUTPUT_STAGE_0]) {
struct ia_css_binary_descr vf_pp_descr;
@@ -6049,9 +6168,10 @@ static int load_primary_binaries(
return err;
#ifdef ISP2401
- /* When the input system is 2401, only the Direct Sensor Mode
- * Offline Capture uses the ISP copy binary.
- */
+ /*
+ * When the input system is 2401, only the Direct Sensor Mode
+ * Offline Capture uses the ISP copy binary.
+ */
need_isp_copy_binary = !online && sensor;
#else
need_isp_copy_binary = !online && !continuous && !memory;
@@ -6105,17 +6225,19 @@ allocate_delay_frames(struct ia_css_pipe *pipe)
struct ia_css_video_settings *mycs_video = &pipe->pipe_settings.video;
ref_info = mycs_video->video_binary.internal_frame_info;
- /*The ref frame expects
- * 1. Y plane
- * 2. UV plane with line interleaving, like below
- * UUUUUU(width/2 times) VVVVVVVV..(width/2 times)
- *
- * This format is not YUV420(which has Y, U and V planes).
- * Its closer to NV12, except that the UV plane has UV
- * interleaving, like UVUVUVUVUVUVUVUVU...
- *
- * TODO: make this ref_frame format as a separate frame format
- */
+
+ /*
+ * The ref frame expects
+ * 1. Y plane
+ * 2. UV plane with line interleaving, like below
+ * UUUUUU(width/2 times) VVVVVVVV..(width/2 times)
+ *
+ * This format is not YUV420(which has Y, U and V planes).
+ * Its closer to NV12, except that the UV plane has UV
+ * interleaving, like UVUVUVUVUVUVUVUVU...
+ *
+ * TODO: make this ref_frame format as a separate frame format
+ */
ref_info.format = IA_CSS_FRAME_FORMAT_NV12;
delay_frames = mycs_video->delay_frames;
}
@@ -6124,17 +6246,19 @@ allocate_delay_frames(struct ia_css_pipe *pipe)
struct ia_css_preview_settings *mycs_preview = &pipe->pipe_settings.preview;
ref_info = mycs_preview->preview_binary.internal_frame_info;
- /*The ref frame expects
- * 1. Y plane
- * 2. UV plane with line interleaving, like below
- * UUUUUU(width/2 times) VVVVVVVV..(width/2 times)
- *
- * This format is not YUV420(which has Y, U and V planes).
- * Its closer to NV12, except that the UV plane has UV
- * interleaving, like UVUVUVUVUVUVUVUVU...
- *
- * TODO: make this ref_frame format as a separate frame format
- */
+
+ /*
+ * The ref frame expects
+ * 1. Y plane
+ * 2. UV plane with line interleaving, like below
+ * UUUUUU(width/2 times) VVVVVVVV..(width/2 times)
+ *
+ * This format is not YUV420(which has Y, U and V planes).
+ * Its closer to NV12, except that the UV plane has UV
+ * interleaving, like UVUVUVUVUVUVUVUVU...
+ *
+ * TODO: make this ref_frame format as a separate frame format
+ */
ref_info.format = IA_CSS_FRAME_FORMAT_NV12;
delay_frames = mycs_preview->delay_frames;
}
@@ -6591,9 +6715,11 @@ need_yuv_scaler_stage(const struct ia_css_pipe *pipe)
return false;
}
-/* TODO: it is temporarily created from ia_css_pipe_create_cas_scaler_desc */
-/* which has some hard-coded knowledge which prevents reuse of the function. */
-/* Later, merge this with ia_css_pipe_create_cas_scaler_desc */
+/*
+ * TODO: it is temporarily created from ia_css_pipe_create_cas_scaler_desc
+ * which has some hard-coded knowledge which prevents reuse of the function.
+ * Later, merge this with ia_css_pipe_create_cas_scaler_desc
+ */
static int ia_css_pipe_create_cas_scaler_desc_single_output(
struct ia_css_frame_info *cas_scaler_in_info,
struct ia_css_frame_info *cas_scaler_out_info,
@@ -6990,22 +7116,22 @@ load_yuvpp_binaries(struct ia_css_pipe *pipe)
#if defined(ISP2401)
/*
- * NOTES
- * - Why does the "yuvpp" pipe needs "isp_copy_binary" (i.e. ISP Copy) when
- * its input is "ATOMISP_INPUT_FORMAT_YUV422_8"?
- *
- * In most use cases, the first stage in the "yuvpp" pipe is the "yuv_scale_
- * binary". However, the "yuv_scale_binary" does NOT support the input-frame
- * format as "IA_CSS_STREAM _FORMAT_YUV422_8".
- *
- * Hence, the "isp_copy_binary" is required to be present in front of the "yuv
- * _scale_binary". It would translate the input-frame to the frame formats that
- * are supported by the "yuv_scale_binary".
- *
- * Please refer to "FrameWork/css/isp/pipes/capture_pp/capture_pp_1.0/capture_
- * pp_defs.h" for the list of input-frame formats that are supported by the
- * "yuv_scale_binary".
- */
+ * NOTES
+ * - Why does the "yuvpp" pipe needs "isp_copy_binary" (i.e. ISP Copy) when
+ * its input is "ATOMISP_INPUT_FORMAT_YUV422_8"?
+ *
+ * In most use cases, the first stage in the "yuvpp" pipe is the "yuv_scale_
+ * binary". However, the "yuv_scale_binary" does NOT support the input-frame
+ * format as "IA_CSS_STREAM _FORMAT_YUV422_8".
+ *
+ * Hence, the "isp_copy_binary" is required to be present in front of the "yuv
+ * _scale_binary". It would translate the input-frame to the frame formats that
+ * are supported by the "yuv_scale_binary".
+ *
+ * Please refer to "FrameWork/css/isp/pipes/capture_pp/capture_pp_1.0/capture_
+ * pp_defs.h" for the list of input-frame formats that are supported by the
+ * "yuv_scale_binary".
+ */
need_isp_copy_binary =
(pipe->stream->config.input_config.format == ATOMISP_INPUT_FORMAT_YUV422_8);
#else /* !ISP2401 */
@@ -7021,23 +7147,23 @@ load_yuvpp_binaries(struct ia_css_pipe *pipe)
goto ERR;
/*
- * NOTES
- * - Why is "pipe->pipe_settings.capture.copy_binary.online" specified?
- *
- * In some use cases, the first stage in the "yuvpp" pipe is the
- * "isp_copy_binary". The "isp_copy_binary" is designed to process
- * the input from either the system DDR or from the IPU internal VMEM.
- * So it provides the flag "online" to specify where its input is from,
- * i.e.:
- *
- * (1) "online <= true", the input is from the IPU internal VMEM.
- * (2) "online <= false", the input is from the system DDR.
- *
- * In other use cases, the first stage in the "yuvpp" pipe is the
- * "yuv_scale_binary". "The "yuv_scale_binary" is designed to process the
- * input ONLY from the system DDR. So it does not provide the flag "online"
- * to specify where its input is from.
- */
+ * NOTES
+ * - Why is "pipe->pipe_settings.capture.copy_binary.online" specified?
+ *
+ * In some use cases, the first stage in the "yuvpp" pipe is the
+ * "isp_copy_binary". The "isp_copy_binary" is designed to process
+ * the input from either the system DDR or from the IPU internal VMEM.
+ * So it provides the flag "online" to specify where its input is from,
+ * i.e.:
+ *
+ * (1) "online <= true", the input is from the IPU internal VMEM.
+ * (2) "online <= false", the input is from the system DDR.
+ *
+ * In other use cases, the first stage in the "yuvpp" pipe is the
+ * "yuv_scale_binary". "The "yuv_scale_binary" is designed to process the
+ * input ONLY from the system DDR. So it does not provide the flag "online"
+ * to specify where its input is from.
+ */
pipe->pipe_settings.capture.copy_binary.online = pipe->stream->config.online;
}
@@ -7230,8 +7356,11 @@ sh_css_pipe_load_binaries(struct ia_css_pipe *pipe)
}
if (err) {
if (sh_css_pipe_unload_binaries(pipe)) {
- /* currently css does not support multiple error returns in a single function,
- * using -EINVAL in this case */
+ /*
+ * currently css does not support multiple error
+ * returns in a single function, using -EINVAL in
+ * this case
+ */
err = -EINVAL;
}
}
@@ -7282,12 +7411,13 @@ create_host_yuvpp_pipeline(struct ia_css_pipe *pipe)
num_output_stage = pipe->pipe_settings.yuvpp.num_output;
#ifdef ISP2401
- /* When the input system is 2401, always enable 'in_frameinfo_memory'
- * except for the following:
- * - Direct Sensor Mode Online Capture
- * - Direct Sensor Mode Continuous Capture
- * - Buffered Sensor Mode Continuous Capture
- */
+ /*
+ * When the input system is 2401, always enable 'in_frameinfo_memory'
+ * except for the following:
+ * - Direct Sensor Mode Online Capture
+ * - Direct Sensor Mode Continuous Capture
+ * - Buffered Sensor Mode Continuous Capture
+ */
sensor = pipe->stream->config.mode == IA_CSS_INPUT_MODE_SENSOR;
buffered_sensor = pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR;
online = pipe->stream->config.online;
@@ -7298,19 +7428,23 @@ create_host_yuvpp_pipeline(struct ia_css_pipe *pipe)
/* Construct in_frame info (only in case we have dynamic input */
need_in_frameinfo_memory = pipe->stream->config.mode == IA_CSS_INPUT_MODE_MEMORY;
#endif
- /* the input frame can come from:
- * a) memory: connect yuvscaler to me->in_frame
- * b) sensor, via copy binary: connect yuvscaler to copy binary later on */
+ /*
+ * the input frame can come from:
+ *
+ * a) memory: connect yuvscaler to me->in_frame
+ * b) sensor, via copy binary: connect yuvscaler to copy binary later
+ * on
+ */
if (need_in_frameinfo_memory) {
/* TODO: improve for different input formats. */
/*
- * "pipe->stream->config.input_config.format" represents the sensor output
- * frame format, e.g. YUV422 8-bit.
- *
- * "in_frame_format" represents the imaging pipe's input frame format, e.g.
- * Bayer-Quad RAW.
- */
+ * "pipe->stream->config.input_config.format" represents the sensor output
+ * frame format, e.g. YUV422 8-bit.
+ *
+ * "in_frame_format" represents the imaging pipe's input frame format, e.g.
+ * Bayer-Quad RAW.
+ */
int in_frame_format;
if (pipe->stream->config.input_config.format ==
@@ -7319,22 +7453,22 @@ create_host_yuvpp_pipeline(struct ia_css_pipe *pipe)
} else if (pipe->stream->config.input_config.format ==
ATOMISP_INPUT_FORMAT_YUV422_8) {
/*
- * When the sensor output frame format is "ATOMISP_INPUT_FORMAT_YUV422_8",
- * the "isp_copy_var" binary is selected as the first stage in the yuvpp
- * pipe.
- *
- * For the "isp_copy_var" binary, it reads the YUV422-8 pixels from
- * the frame buffer (at DDR) to the frame-line buffer (at VMEM).
- *
- * By now, the "isp_copy_var" binary does NOT provide a separated
- * frame-line buffer to store the YUV422-8 pixels. Instead, it stores
- * the YUV422-8 pixels in the frame-line buffer which is designed to
- * store the Bayer-Quad RAW pixels.
- *
- * To direct the "isp_copy_var" binary reading from the RAW frame-line
- * buffer, its input frame format must be specified as "IA_CSS_FRAME_
- * FORMAT_RAW".
- */
+ * When the sensor output frame format is "ATOMISP_INPUT_FORMAT_YUV422_8",
+ * the "isp_copy_var" binary is selected as the first stage in the yuvpp
+ * pipe.
+ *
+ * For the "isp_copy_var" binary, it reads the YUV422-8 pixels from
+ * the frame buffer (at DDR) to the frame-line buffer (at VMEM).
+ *
+ * By now, the "isp_copy_var" binary does NOT provide a separated
+ * frame-line buffer to store the YUV422-8 pixels. Instead, it stores
+ * the YUV422-8 pixels in the frame-line buffer which is designed to
+ * store the Bayer-Quad RAW pixels.
+ *
+ * To direct the "isp_copy_var" binary reading from the RAW frame-line
+ * buffer, its input frame format must be specified as "IA_CSS_FRAME_
+ * FORMAT_RAW".
+ */
in_frame_format = IA_CSS_FRAME_FORMAT_RAW;
} else {
in_frame_format = IA_CSS_FRAME_FORMAT_NV12;
@@ -7633,13 +7767,14 @@ create_host_regular_capture_pipeline(struct ia_css_pipe *pipe)
ia_css_pipe_util_create_output_frames(out_frames);
#ifdef ISP2401
- /* When the input system is 2401, always enable 'in_frameinfo_memory'
- * except for the following:
- * - Direct Sensor Mode Online Capture
- * - Direct Sensor Mode Online Capture
- * - Direct Sensor Mode Continuous Capture
- * - Buffered Sensor Mode Continuous Capture
- */
+ /*
+ * When the input system is 2401, always enable 'in_frameinfo_memory'
+ * except for the following:
+ * - Direct Sensor Mode Online Capture
+ * - Direct Sensor Mode Online Capture
+ * - Direct Sensor Mode Continuous Capture
+ * - Buffered Sensor Mode Continuous Capture
+ */
sensor = (pipe->stream->config.mode == IA_CSS_INPUT_MODE_SENSOR);
buffered_sensor = (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR);
online = pipe->stream->config.online;
@@ -7772,15 +7907,15 @@ create_host_regular_capture_pipeline(struct ia_css_pipe *pipe)
local_out_frame = NULL;
ia_css_pipe_util_set_output_frames(out_frames, 0, local_out_frame);
/*
- * WARNING: The #if def flag has been added below as a
- * temporary solution to solve the problem of enabling the
- * view finder in a single binary in a capture flow. The
- * vf-pp stage has been removed from Skycam in the solution
- * provided. The vf-pp stage should be re-introduced when
- * required. This * should not be considered as a clean solution.
- * Proper investigation should be done to come up with the clean
- * solution.
- * */
+ * WARNING: The #if def flag has been added below as a
+ * temporary solution to solve the problem of enabling the
+ * view finder in a single binary in a capture flow. The
+ * vf-pp stage has been removed from Skycam in the solution
+ * provided. The vf-pp stage should be re-introduced when
+ * required. This * should not be considered as a clean solution.
+ * Proper investigation should be done to come up with the clean
+ * solution.
+ */
ia_css_pipe_get_generic_stage_desc(&stage_desc,
primary_binary[i],
out_frames,
@@ -7794,8 +7929,7 @@ create_host_regular_capture_pipeline(struct ia_css_pipe *pipe)
return err;
}
}
- /* If we use copy iso primary,
- the input must be yuv iso raw */
+ /* If we use copy iso primary, the input must be yuv iso raw */
current_stage->args.copy_vf =
primary_binary[0]->info->sp.pipeline.mode ==
IA_CSS_BINARY_MODE_COPY;
@@ -7920,14 +8054,14 @@ create_host_regular_capture_pipeline(struct ia_css_pipe *pipe)
}
/*
- * WARNING: The #if def flag has been added below as a
- * temporary solution to solve the problem of enabling the
- * view finder in a single binary in a capture flow. The vf-pp
- * stage has been removed from Skycam in the solution provided.
- * The vf-pp stage should be re-introduced when required. This
- * should not be considered as a clean solution. Proper
- * investigation should be done to come up with the clean solution.
- * */
+ * WARNING: The #if def flag has been added below as a
+ * temporary solution to solve the problem of enabling the
+ * view finder in a single binary in a capture flow. The vf-pp
+ * stage has been removed from Skycam in the solution provided.
+ * The vf-pp stage should be re-introduced when required. This
+ * should not be considered as a clean solution. Proper
+ * investigation should be done to come up with the clean solution.
+ */
if (mode != IA_CSS_CAPTURE_MODE_RAW &&
mode != IA_CSS_CAPTURE_MODE_BAYER &&
current_stage && vf_frame) {
@@ -8021,10 +8155,10 @@ static int capture_start(struct ia_css_pipe *pipe)
#if !defined(ISP2401)
/*
- * old isys: for IA_CSS_PIPE_MODE_COPY pipe, isys rx has to be configured,
- * which is currently done in start_binary(); but COPY pipe contains no binary,
- * and does not call start_binary(); so we need to configure the rx here.
- */
+ * old isys: for IA_CSS_PIPE_MODE_COPY pipe, isys rx has to be configured,
+ * which is currently done in start_binary(); but COPY pipe contains no binary,
+ * and does not call start_binary(); so we need to configure the rx here.
+ */
if (pipe->config.mode == IA_CSS_PIPE_MODE_COPY &&
pipe->stream->reconfigure_css_rx) {
ia_css_isys_rx_configure(&pipe->stream->csi_rx_config,
@@ -8140,7 +8274,8 @@ append_firmware(struct ia_css_fw_info **l, struct ia_css_fw_info *firmware)
while (*l)
l = &(*l)->next;
*l = firmware;
- /*firmware->next = NULL;*/ /* when multiple acc extensions are loaded, 'next' can be not NULL */
+ /* when multiple acc extensions are loaded, 'next' can be not NULL */
+ /*firmware->next = NULL;*/
IA_CSS_LEAVE_PRIVATE("");
}
@@ -8326,9 +8461,9 @@ sh_css_pipeline_add_acc_stage(struct ia_css_pipeline *pipeline,
}
/*
- * @brief Tag a specific frame in continuous capture.
- * Refer to "sh_css_internal.h" for details.
- */
+ * @brief Tag a specific frame in continuous capture.
+ * Refer to "sh_css_internal.h" for details.
+ */
int ia_css_stream_capture_frame(struct ia_css_stream *stream,
unsigned int exp_id)
{
@@ -8355,10 +8490,12 @@ int ia_css_stream_capture_frame(struct ia_css_stream *stream,
sh_css_create_tag_descr(0, 0, 0, exp_id, &tag_descr);
/* Encode the tag descriptor into a 32-bit value */
encoded_tag_descr = sh_css_encode_tag_descr(&tag_descr);
- /* Enqueue the encoded tag to the host2sp queue.
- * Note: The pipe and stage IDs for tag_cmd queue are hard-coded to 0
- * on both host and the SP side.
- * It is mainly because it is enough to have only one tag_cmd queue */
+ /*
+ * Enqueue the encoded tag to the host2sp queue.
+ * Note: The pipe and stage IDs for tag_cmd queue are hard-coded to 0
+ * on both host and the SP side.
+ * It is mainly because it is enough to have only one tag_cmd queue
+ */
err = ia_css_bufq_enqueue_tag_cmd(encoded_tag_descr);
IA_CSS_LEAVE_ERR(err);
@@ -8366,9 +8503,9 @@ int ia_css_stream_capture_frame(struct ia_css_stream *stream,
}
/*
- * @brief Configure the continuous capture.
- * Refer to "sh_css_internal.h" for details.
- */
+ * @brief Configure the continuous capture.
+ * Refer to "sh_css_internal.h" for details.
+ */
int ia_css_stream_capture(struct ia_css_stream *stream, int num_captures,
unsigned int skip, int offset)
{
@@ -8404,10 +8541,12 @@ int ia_css_stream_capture(struct ia_css_stream *stream, int num_captures,
return -EBUSY;
}
- /* Enqueue the encoded tag to the host2sp queue.
- * Note: The pipe and stage IDs for tag_cmd queue are hard-coded to 0
- * on both host and the SP side.
- * It is mainly because it is enough to have only one tag_cmd queue */
+ /*
+ * Enqueue the encoded tag to the host2sp queue.
+ * Note: The pipe and stage IDs for tag_cmd queue are hard-coded to 0
+ * on both host and the SP side.
+ * It is mainly because it is enough to have only one tag_cmd queue
+ */
return_err = ia_css_bufq_enqueue_tag_cmd((uint32_t)encoded_tag_descr);
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
@@ -8552,9 +8691,11 @@ void ia_css_stream_config_defaults(struct ia_css_stream_config *stream_config)
stream_config->online = true;
stream_config->left_padding = -1;
stream_config->pixels_per_clock = 1;
- /* temporary default value for backwards compatibility.
- * This field used to be hardcoded within CSS but this has now
- * been moved to the stream_config struct. */
+ /*
+ * temporary default value for backwards compatibility.
+ * This field used to be hardcoded within CSS but this has now
+ * been moved to the stream_config struct.
+ */
stream_config->source.port.rxcount = 0x04040404;
}
@@ -8568,7 +8709,7 @@ ia_css_acc_pipe_create(struct ia_css_pipe *pipe)
return -EINVAL;
}
- /* There is not meaning for num_execs = 0 semantically. Run atleast once. */
+ /* There is not meaning for num_execs = 0 semantically. Run at least once. */
if (pipe->config.acc_num_execs == 0)
pipe->config.acc_num_execs = 1;
@@ -8639,9 +8780,11 @@ ia_css_pipe_create_extra(const struct ia_css_pipe_config *config,
ia_css_pipe_extra_config_defaults(&internal_pipe->extra_config);
if (config->mode == IA_CSS_PIPE_MODE_ACC) {
- /* Temporary hack to migrate acceleration to CSS 2.0.
- * In the future the code for all pipe types should be
- * unified. */
+ /*
+ * Temporary hack to migrate acceleration to CSS 2.0.
+ * In the future the code for all pipe types should be
+ * unified.
+ */
*pipe = internal_pipe;
if (!internal_pipe->config.acc_extension &&
internal_pipe->config.num_acc_stages ==
@@ -8653,21 +8796,23 @@ ia_css_pipe_create_extra(const struct ia_css_pipe_config *config,
return ia_css_acc_pipe_create(internal_pipe);
}
- /* Use config value when dvs_frame_delay setting equal to 2, otherwise always 1 by default */
+ /*
+ * Use config value when dvs_frame_delay setting equal to 2,
+ * otherwise always 1 by default
+ */
if (internal_pipe->config.dvs_frame_delay == IA_CSS_FRAME_DELAY_2)
internal_pipe->dvs_frame_delay = 2;
else
internal_pipe->dvs_frame_delay = 1;
- /* we still keep enable_raw_binning for backward compatibility, for any new
- fractional bayer downscaling, we should use bayer_ds_out_res. if both are
- specified, bayer_ds_out_res will take precedence.if none is specified, we
- set bayer_ds_out_res equal to IF output resolution(IF may do cropping on
- sensor output) or use default decimation factor 1. */
- if (internal_pipe->extra_config.enable_raw_binning &&
- internal_pipe->config.bayer_ds_out_res.width) {
- /* fill some code here, if no code is needed, please remove it during integration */
- }
+ /*
+ * we still keep enable_raw_binning for backward compatibility,
+ * for any new fractional bayer downscaling, we should use
+ * bayer_ds_out_res. if both are specified, bayer_ds_out_res will
+ * take precedence.if none is specified, we set bayer_ds_out_res
+ * equal to IF output resolution(IF may do cropping on sensor output)
+ * or use default decimation factor 1.
+ */
/* YUV downscaling */
if ((internal_pipe->config.vf_pp_in_res.width ||
@@ -8871,8 +9016,10 @@ ia_css_stream_configure_rx(struct ia_css_stream *stream)
if (config->compression.type == IA_CSS_CSI2_COMPRESSION_TYPE_NONE)
stream->csi_rx_config.comp = MIPI_PREDICTOR_NONE;
else
- /* not implemented yet, requires extension of the rx_cfg_t
- * struct */
+ /*
+ * not implemented yet, requires extension of the rx_cfg_t
+ * struct
+ */
return -EINVAL;
stream->csi_rx_config.is_two_ppc = (stream->config.pixels_per_clock == 2);
@@ -8959,8 +9106,10 @@ metadata_info_init(const struct ia_css_metadata_config *mdc,
return -EINVAL;
md->resolution = mdc->resolution;
- /* We round up the stride to a multiple of the width
- * of the port going to DDR, this is a HW requirements (DMA). */
+ /*
+ * We round up the stride to a multiple of the width
+ * of the port going to DDR, this is a HW requirements (DMA).
+ */
md->stride = CEIL_MUL(mdc->resolution.width, HIVE_ISP_DDR_WORD_BYTES);
md->size = mdc->resolution.height * md->stride;
return 0;
@@ -9523,10 +9672,13 @@ ia_css_stream_destroy(struct ia_css_stream *stream)
if (free_mpi) {
for (i = 0; i < stream->num_pipes; i++) {
struct ia_css_pipe *entry = stream->pipes[i];
- /* free any mipi frames that are remaining:
- * some test stream create-destroy cycles do not generate output frames
- * and the mipi buffer is not freed in the deque function
- */
+ /*
+ * free any mipi frames that are remaining:
+ * some test stream create-destroy cycles do
+ * not generate output frames
+ * and the mipi buffer is not freed in the
+ * deque function
+ */
if (entry)
free_mipi_frames(entry);
}
@@ -9605,11 +9757,11 @@ ia_css_stream_get_info(const struct ia_css_stream *stream,
}
/*
- * Rebuild a stream, including allocating structs, setting configuration and
- * building the required pipes.
- * The data is taken from the css_save struct updated upon stream creation.
- * The stream handle is used to identify the correct entry in the css_save struct
- */
+ * Rebuild a stream, including allocating structs, setting configuration and
+ * building the required pipes.
+ * The data is taken from the css_save struct updated upon stream creation.
+ * The stream handle is used to identify the correct entry in the css_save struct
+ */
int
ia_css_stream_load(struct ia_css_stream *stream)
{
@@ -9737,8 +9889,10 @@ ia_css_stream_stop(struct ia_css_stream *stream)
if (err)
return err;
- /* Ideally, unmapping should happen after pipeline_stop, but current
- * semantics do not allow that. */
+ /*
+ * Ideally, unmapping should happen after pipeline_stop, but current
+ * semantics do not allow that.
+ */
/* err = map_sp_threads(stream, false); */
return err;
@@ -9761,9 +9915,9 @@ ia_css_stream_has_stopped(struct ia_css_stream *stream)
/* ISP2400 */
/*
- * Destroy the stream and all the pipes related to it.
- * The stream handle is used to identify the correct entry in the css_save struct
- */
+ * Destroy the stream and all the pipes related to it.
+ * The stream handle is used to identify the correct entry in the css_save struct
+ */
int
ia_css_stream_unload(struct ia_css_stream *stream)
{
@@ -10026,11 +10180,12 @@ ia_css_pipe_get_pipe_num(const struct ia_css_pipe *pipe)
{
assert(pipe);
- /* KW was not sure this function was not returning a value
- that was out of range; so added an assert, and, for the
- case when asserts are not enabled, clip to the largest
- value; pipe_num is unsigned so the value cannot be too small
- */
+ /*
+ * KW was not sure this function was not returning a value
+ * that was out of range; so added an assert, and, for the
+ * case when asserts are not enabled, clip to the largest
+ * value; pipe_num is unsigned so the value cannot be too small
+ */
assert(pipe->pipe_num < IA_CSS_PIPELINE_NUM_MAX);
if (pipe->pipe_num >= IA_CSS_PIPELINE_NUM_MAX)
@@ -10085,10 +10240,10 @@ ia_css_start_sp(void)
}
/*
- * Time to wait SP for termincate. Only condition when this can happen
- * is a fatal hw failure, but we must be able to detect this and emit
- * a proper error trace.
- */
+ * Time to wait SP for termincate. Only condition when this can happen
+ * is a fatal hw failure, but we must be able to detect this and emit
+ * a proper error trace.
+ */
#define SP_SHUTDOWN_TIMEOUT_US 200000
int
@@ -10306,8 +10461,10 @@ ia_css_unlock_raw_frame(struct ia_css_stream *stream, uint32_t exp_id)
IA_CSS_ENTER("");
- /* Only continuous streams have a tagger to which we can send the
- * unlock message. */
+ /*
+ * Only continuous streams have a tagger to which we can send the
+ * unlock message.
+ */
if (!stream || !stream->config.continuous) {
IA_CSS_ERROR("invalid stream pointer");
return -EINVAL;
@@ -10319,8 +10476,10 @@ ia_css_unlock_raw_frame(struct ia_css_stream *stream, uint32_t exp_id)
return -EINVAL;
}
- /* Send the event. Since we verified that the exp_id is valid,
- * we can safely assign it to an 8-bit argument here. */
+ /*
+ * Send the event. Since we verified that the exp_id is valid,
+ * we can safely assign it to an 8-bit argument here.
+ */
ret = ia_css_bufq_enqueue_psys_event(
IA_CSS_PSYS_SW_EVENT_UNLOCK_RAW_BUFFER, exp_id, 0, 0);
@@ -10328,9 +10487,10 @@ ia_css_unlock_raw_frame(struct ia_css_stream *stream, uint32_t exp_id)
return ret;
}
-/* @brief Set the state (Enable or Disable) of the Extension stage in the
- * given pipe.
- */
+/*
+ * @brief Set the state (Enable or Disable) of the Extension stage in the
+ * given pipe.
+ */
int
ia_css_pipe_set_qos_ext_state(struct ia_css_pipe *pipe, uint32_t fw_handle,
bool enable)
@@ -10374,9 +10534,10 @@ ia_css_pipe_set_qos_ext_state(struct ia_css_pipe *pipe, uint32_t fw_handle,
return err;
}
-/* @brief Get the state (Enable or Disable) of the Extension stage in the
- * given pipe.
- */
+/*
+ * @brief Get the state (Enable or Disable) of the Extension stage in the
+ * given pipe.
+ */
int
ia_css_pipe_get_qos_ext_state(struct ia_css_pipe *pipe, uint32_t fw_handle,
bool *enable)
Use the coding style for the comments at this file. While here, drop a do-nothing if logic. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- To mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/23] at: https://lore.kernel.org/all/cover.1637061474.git.mchehab+huawei@kernel.org/ drivers/staging/media/atomisp/pci/sh_css.c | 881 ++++++++++++--------- 1 file changed, 521 insertions(+), 360 deletions(-)