@@ -392,7 +392,7 @@ int cec_thread_func(void *_adap)
* happen and is an indication of a faulty CEC adapter
* driver, or the CEC bus is in some weird state.
*/
- dprintk(0, "message %*ph timed out!\n",
+ dprintk(0, "%s: message %*ph timed out!\n", __func__,
adap->transmitting->msg.len,
adap->transmitting->msg.msg);
/* Just give up on this. */
@@ -468,7 +468,7 @@ void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
struct cec_msg *msg;
u64 ts = ktime_get_ns();
- dprintk(2, "cec_transmit_done %02x\n", status);
+ dprintk(2, "%s: status %02x\n", __func__, status);
mutex_lock(&adap->lock);
data = adap->transmitting;
if (!data) {
@@ -477,7 +477,8 @@ void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
* unplugged while the transmit is ongoing. Ignore this
* transmit in that case.
*/
- dprintk(1, "cec_transmit_done without an ongoing transmit!\n");
+ dprintk(1, "%s was called without an ongoing transmit!\n",
+ __func__);
goto unlock;
}
@@ -504,6 +505,12 @@ void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt,
!(status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK))) {
/* Retry this message */
data->attempts--;
+ if (msg->timeout)
+ dprintk(2, "retransmit: %*ph (attempts: %d, wait for 0x%02x)\n",
+ msg->len, msg->msg, data->attempts, msg->reply);
+ else
+ dprintk(2, "retransmit: %*ph (attempts: %d)\n",
+ msg->len, msg->msg, data->attempts);
/* Add the message in front of the transmit queue */
list_add(&data->list, &adap->transmit_queue);
adap->transmit_queue_sz++;
@@ -911,7 +918,7 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg)
memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
mutex_lock(&adap->lock);
- dprintk(2, "cec_received_msg: %*ph\n", msg->len, msg->msg);
+ dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
/* Check if this message was for us (directed or broadcast). */
if (!cec_msg_is_broadcast(msg))
@@ -1112,9 +1119,6 @@ static int cec_config_log_addr(struct cec_adapter *adap,
las->log_addr[idx] = log_addr;
las->log_addr_mask |= 1 << log_addr;
adap->phys_addrs[log_addr] = adap->phys_addr;
-
- dprintk(2, "claimed addr %d (%d)\n", log_addr,
- las->primary_device_type[idx]);
return 1;
}
@@ -1300,7 +1304,7 @@ static int cec_config_thread_func(void *arg)
/* Report Physical Address */
cec_msg_report_physical_addr(&msg, adap->phys_addr,
las->primary_device_type[i]);
- dprintk(2, "config: la %d pa %x.%x.%x.%x\n",
+ dprintk(1, "config: la %d pa %x.%x.%x.%x\n",
las->log_addr[i],
cec_phys_addr_exp(adap->phys_addr));
cec_transmit_msg_fh(adap, &msg, NULL, false);
@@ -1534,12 +1538,12 @@ int __cec_s_log_addrs(struct cec_adapter *adap,
if (log_addrs->num_log_addrs == 2) {
if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) |
(1 << CEC_LOG_ADDR_TYPE_TV)))) {
- dprintk(1, "Two LAs is only allowed for audiosystem and TV\n");
+ dprintk(1, "two LAs is only allowed for audiosystem and TV\n");
return -EINVAL;
}
if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) |
(1 << CEC_LOG_ADDR_TYPE_RECORD)))) {
- dprintk(1, "An audiosystem/TV can only be combined with record or playback\n");
+ dprintk(1, "an audiosystem/TV can only be combined with record or playback\n");
return -EINVAL;
}
}
@@ -1653,7 +1657,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
bool from_unregistered = init_laddr == 0xf;
struct cec_msg tx_cec_msg = { };
- dprintk(1, "cec_receive_notify: %*ph\n", msg->len, msg->msg);
+ dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
/* If this is a CDC-Only device, then ignore any non-CDC messages */
if (cec_is_cdc_only(&adap->log_addrs) &&
@@ -1722,7 +1726,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
if (!from_unregistered)
adap->phys_addrs[init_laddr] = pa;
- dprintk(1, "Reported physical address %x.%x.%x.%x for logical address %d\n",
+ dprintk(1, "reported physical address %x.%x.%x.%x for logical address %d\n",
cec_phys_addr_exp(pa), init_laddr);
break;
}
- use __func__ instead of writing the full function name - drop debug message in cec_config_log_addr since the same information will be reported later - use debug level 1 for errors and infrequent events, use level 2 for debugging CEC message traffic - log when a transmit is retried, very useful to know when debugging - debug messages now all start with lower case Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> --- drivers/media/cec/cec-adap.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-)