@@ -572,6 +572,12 @@ static int ehci_init(struct usb_hcd *hcd)
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
/*
+ * by default set standard 80% (== 100 usec/uframe) max periodic
+ * bandwidth as required by USB 2.0
+ */
+ ehci->uframe_periodic_max = 100;
+
+ /*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
@@ -172,7 +172,7 @@ periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe)
}
}
#ifdef DEBUG
- if (usecs > 100)
+ if (usecs > ehci->uframe_periodic_max)
ehci_err (ehci, "uframe %d sched overrun: %d usecs\n",
frame * 8 + uframe, usecs);
#endif
@@ -709,11 +709,8 @@ static int check_period (
if (uframe >= 8)
return 0;
- /*
- * 80% periodic == 100 usec/uframe available
- * convert "usecs we need" to "max already claimed"
- */
- usecs = 100 - usecs;
+ /* convert "usecs we need" to "max already claimed" */
+ usecs = ehci->uframe_periodic_max - usecs;
/* we "know" 2 and 4 uframe intervals were rejected; so
* for period 0, check _every_ microframe in the schedule.
@@ -1286,9 +1283,9 @@ itd_slot_ok (
{
uframe %= period;
do {
- /* can't commit more than 80% periodic == 100 usec */
+ /* can't commit more than uframe_periodic_max usec */
if (periodic_usecs (ehci, uframe >> 3, uframe & 0x7)
- > (100 - usecs))
+ > (ehci->uframe_periodic_max - usecs))
return 0;
/* we know urb->interval is 2^N uframes */
@@ -1345,7 +1342,7 @@ sitd_slot_ok (
#endif
/* check starts (OUT uses more than one) */
- max_used = 100 - stream->usecs;
+ max_used = ehci->uframe_periodic_max - stream->usecs;
for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) {
if (periodic_usecs (ehci, frame, uf) > max_used)
return 0;
@@ -1354,7 +1351,7 @@ sitd_slot_ok (
/* for IN, check CSPLIT */
if (stream->c_usecs) {
uf = uframe & 7;
- max_used = 100 - stream->c_usecs;
+ max_used = ehci->uframe_periodic_max - stream->c_usecs;
do {
tmp = 1 << uf;
tmp <<= 8;
@@ -74,21 +74,111 @@ static ssize_t store_companion(struct device *dev,
}
static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
+
+/*
+ * Display / Set uframe_periodic_max
+ */
+static ssize_t show_uframe_periodic_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ehci_hcd *ehci;
+ int n;
+
+ ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+ n = scnprintf(buf, PAGE_SIZE, "%d\n", ehci->uframe_periodic_max);
+ return n;
+}
+
+
+static ssize_t store_uframe_periodic_max(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ehci_hcd *ehci;
+ unsigned uframe_periodic_max;
+ unsigned frame, uframe, allocated;
+ unsigned long flags;
+ ssize_t ret;
+
+ ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+ if (sscanf(buf, "%u", &uframe_periodic_max) != 1)
+ return -EINVAL;
+
+ if (uframe_periodic_max < 100 || uframe_periodic_max >= 125) {
+ ehci_info(ehci, "rejecting invalid request for "
+ "uframe_periodic_max=%u\n", uframe_periodic_max);
+ return -EINVAL;
+ }
+
+ ret = -EINVAL;
+
+ /*
+ * lock, so that our checking does not race with possible periodic
+ * bandwidth allocation through submitting new urbs.
+ */
+ spin_lock_irqsave (&ehci->lock, flags);
+
+ /*
+ * for request to decrease max periodic bandwidth, we have to check
+ * every microframe in the schedule to see whether the decrease is
+ * possible.
+ */
+ if (uframe_periodic_max < ehci->uframe_periodic_max)
+ for (frame = 0; frame < ehci->periodic_size; ++frame)
+ for (uframe = 0; uframe < 7; ++uframe) {
+ allocated = periodic_usecs (ehci, frame, uframe);
+ if (allocated > uframe_periodic_max) {
+ ehci_info(ehci,
+ "cannot decrease uframe_periodic_max becase periodic bandwidth "
+ "is already allocated (%u > %u)\n",
+ allocated, uframe_periodic_max);
+ goto out_unlock;
+ }
+ }
+
+ /* increasing is always ok */
+
+ ehci_info(ehci, "setting max periodic bandwidth to %u%% "
+ "(== %u usec/uframe)\n",
+ 100*uframe_periodic_max/125, uframe_periodic_max);
+
+ if (uframe_periodic_max != 100)
+ ehci_warn(ehci, "max periodic bandwidth set is non-standard\n");
+
+ ehci->uframe_periodic_max = uframe_periodic_max;
+ ret = count;
+
+out_unlock:
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ return ret;
+}
+static DEVICE_ATTR(uframe_periodic_max, 0644, show_uframe_periodic_max, store_uframe_periodic_max);
+
+
static inline int create_sysfs_files(struct ehci_hcd *ehci)
{
+ struct device *controller = ehci_to_hcd(ehci)->self.controller;
int i = 0;
/* with integrated TT there is no companion! */
if (!ehci_is_TDI(ehci))
- i = device_create_file(ehci_to_hcd(ehci)->self.controller,
- &dev_attr_companion);
+ i = device_create_file(controller, &dev_attr_companion);
+ if (i)
+ goto out;
+
+ i = device_create_file(controller, &dev_attr_uframe_periodic_max);
+out:
return i;
}
static inline void remove_sysfs_files(struct ehci_hcd *ehci)
{
+ struct device *controller = ehci_to_hcd(ehci)->self.controller;
+
/* with integrated TT there is no companion! */
if (!ehci_is_TDI(ehci))
- device_remove_file(ehci_to_hcd(ehci)->self.controller,
- &dev_attr_companion);
+ device_remove_file(controller, &dev_attr_companion);
+
+ device_remove_file(controller, &dev_attr_uframe_periodic_max);
}
@@ -87,6 +87,8 @@ struct ehci_hcd { /* one per controller */
union ehci_shadow *pshadow; /* mirror hw periodic table */
int next_uframe; /* scan periodic, start here */
unsigned periodic_sched; /* periodic activity count */
+ unsigned uframe_periodic_max; /* max periodic time per uframe */
+
/* list of itds & sitds completed while clock_frame was still active */
struct list_head cached_itd_list;
There are cases, when 80% max isochronous bandwidth is too limiting. For example I have two USB video capture cards which stream uncompressed video, and to stream full NTSC + PAL videos we'd need NTSC 640x480 YUV422 @30fps ~17.6 MB/s PAL 720x576 YUV422 @25fps ~19.7 MB/s isoc bandwidth. Now, due to limited alt settings in capture devices NTSC one ends up streaming with max_pkt_size=2688 and PAL with max_pkt_size=2892, both with interval=1. In terms of microframe time allocation this gives NTSC ~53us PAL ~57us and together ~110us > 100us == 80% of 125us uframe time. So those two devices can't work together simultaneously because the'd over allocate isochronous bandwidth. 80% seemed a bit arbitrary to me, and I've tried to raise it to 90% and both devices started to work together, so I though sometimes it would be a good idea for users to override hardcoded default of max 80% isoc bandwidth. After all, isn't it a user who should decide how to load the bus? If I can live with 10% or even 5% bulk bandwidth that should be ok. I'm a USB newcomer, but that 80% set in stone by USB 2.0 specification seems to be chosen pretty arbitrary to me, just to serve as a reasonable default. NOTE: for two streams with max_pkt_size=3072 (worst case) both time allocation would be 60us+60us=120us which is 96% periodic bandwidth leaving 4% for bulk and control. Alan Stern suggested that bulk then would be problematic (less than 300*8 bittimes left per microframe), but I think that is still enough for control traffic. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> --- drivers/usb/host/ehci-hcd.c | 6 +++ drivers/usb/host/ehci-sched.c | 17 +++---- drivers/usb/host/ehci-sysfs.c | 98 +++++++++++++++++++++++++++++++++++++++-- drivers/usb/host/ehci.h | 2 + 4 files changed, 109 insertions(+), 14 deletions(-)