[2/2] V4L: mt9m111: switch to v4l2-subdev .s_power() method

Commit Message

Guennadi Liakhovetski June 6, 2011, 5:20 p.m. UTC

Eliminate soc-camera specific .suspend() and .restore() methods in favour
of the standard v4l2-subdev .s_power() method

Signed-off-by: Guennadi Liakhovetski <[e-mail]>
---

Please, test both these mt9m111 patches.

 drivers/media/video/mt9m111.c |   51 +++++++++++++++++++++++++++++++---------
 1 files changed, 39 insertions(+), 12 deletions(-)

Patch

diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 872c99c..828112b 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -169,6 +169,8 @@  struct mt9m111 {
 			 * from v4l2-chip-ident.h */
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
+	struct mutex power_lock; /* lock to protect power_count */
+	int power_count;
 	const struct mt9m111_datafmt *fmt;
 	unsigned int gain;
 	unsigned char autoexposure;
@@ -723,12 +725,7 @@  static const struct v4l2_queryctrl mt9m111_controls[] = {
 	}
 };
 
-static int mt9m111_resume(struct soc_camera_device *icd);
-static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state);
-
 static struct soc_camera_ops mt9m111_ops = {
-	.suspend		= mt9m111_suspend,
-	.resume			= mt9m111_resume,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
@@ -898,11 +895,8 @@  static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return ret;
 }
 
-static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state)
+static int mt9m111_suspend(struct mt9m111 *mt9m111)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
 	mt9m111->gain = mt9m111_get_global_gain(mt9m111);
 
 	return 0;
@@ -920,10 +914,8 @@  static void mt9m111_restore_state(struct mt9m111 *mt9m111)
 	mt9m111_set_autowhitebalance(mt9m111, mt9m111->autowhitebalance);
 }
 
-static int mt9m111_resume(struct soc_camera_device *icd)
+static int mt9m111_resume(struct mt9m111 *mt9m111)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret = 0;
 
 	if (mt9m111->powered) {
@@ -1005,10 +997,45 @@  ei2c:
 	return ret;
 }
 
+static int mt9m111_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&mt9m111->power_lock);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (mt9m111->power_count == !on) {
+		if (on) {
+			ret = mt9m111_resume(mt9m111);
+			if (ret) {
+				dev_err(&client->dev,
+					"Failed to resume the sensor: %d\n", ret);
+				goto out;
+			}
+		} else {
+			mt9m111_suspend(mt9m111);
+		}
+	}
+
+	/* Update the power count. */
+	mt9m111->power_count += on ? 1 : -1;
+	WARN_ON(mt9m111->power_count < 0);
+
+out:
+	mutex_unlock(&mt9m111->power_lock);
+	return ret;
+}
+
 static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
 	.g_ctrl		= mt9m111_g_ctrl,
 	.s_ctrl		= mt9m111_s_ctrl,
 	.g_chip_ident	= mt9m111_g_chip_ident,
+	.s_power	= mt9m111_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9m111_g_register,
 	.s_register	= mt9m111_s_register,