@@ -104,7 +104,7 @@ struct dvb_v5_fe_parms {
unsigned freq_bpf;
/* Satellite specific stuff, used internally */
- //enum dvb_sat_polarization pol;
+ enum dvb_sat_polarization pol;
int high_band;
unsigned diseqc_wait;
unsigned freq_offset;
@@ -272,8 +272,7 @@ static int dvbsat_scr_odu_channel_change(struct dvb_v5_fe_parms *parms, struct d
static int dvbsat_diseqc_set_input(struct dvb_v5_fe_parms *parms, uint16_t t)
{
int rc;
- enum dvb_sat_polarization pol;
- dvb_fe_retrieve_parm(parms, DTV_POLARIZATION,& pol);
+ enum dvb_sat_polarization pol = parms->pol;
int pol_v = (pol == POLARIZATION_V) || (pol == POLARIZATION_R);
int high_band = parms->high_band;
int sat_number = parms->sat_number;
@@ -284,12 +283,6 @@ static int dvbsat_diseqc_set_input(struct dvb_v5_fe_parms *parms, uint16_t t)
if (!lnb->rangeswitch) {
/*
- * Bandstacking and single LO may not be using DISEqC
- */
- if (sat_number < 0)
- return 0;
-
- /*
* Bandstacking switches don't use 2 bands nor use
* DISEqC for setting the polarization. It also doesn't
* use any tone/tone burst
@@ -297,11 +290,6 @@ static int dvbsat_diseqc_set_input(struct dvb_v5_fe_parms *parms, uint16_t t)
pol_v = 0;
high_band = 1;
} else {
- if (sat_number < 0) {
- dvb_logerr("Need a satellite number for DISEqC");
- return -EINVAL;
- }
-
/* Adjust voltage/tone accordingly */
if (parms->sat_number < 2) {
vol_high = pol_v ? 0 : 1;
@@ -310,32 +298,35 @@ static int dvbsat_diseqc_set_input(struct dvb_v5_fe_parms *parms, uint16_t t)
}
}
- rc = dvb_fe_sec_tone(parms, SEC_TONE_OFF);
- if (rc)
- return rc;
-
rc = dvb_fe_sec_voltage(parms, 1, vol_high);
if (rc)
return rc;
- usleep(15 * 1000);
+
+ if (parms->sat_number > 0) {
+ rc = dvb_fe_sec_tone(parms, SEC_TONE_OFF);
+ if (rc)
+ return rc;
- if (!t)
- rc = dvbsat_diseqc_write_to_port_group(parms, &cmd, high_band,
- pol_v, sat_number);
- else
- rc = dvbsat_scr_odu_channel_change(parms, &cmd, high_band,
- pol_v, sat_number, t);
+ usleep(15 * 1000);
- if (rc) {
- dvb_logerr("sending diseq failed");
- return rc;
- }
- usleep((15 + parms->diseqc_wait) * 1000);
+ if (!t)
+ rc = dvbsat_diseqc_write_to_port_group(parms, &cmd, high_band,
+ pol_v, sat_number);
+ else
+ rc = dvbsat_scr_odu_channel_change(parms, &cmd, high_band,
+ pol_v, sat_number, t);
- rc = dvb_fe_diseqc_burst(parms, mini_b);
- if (rc)
- return rc;
- usleep(15 * 1000);
+ if (rc) {
+ dvb_logerr("sending diseq failed");
+ return rc;
+ }
+ usleep((15 + parms->diseqc_wait) * 1000);
+
+ rc = dvb_fe_diseqc_burst(parms, mini_b);
+ if (rc)
+ return rc;
+ usleep(15 * 1000);
+ }
rc = dvb_fe_sec_tone(parms, tone_on ? SEC_TONE_ON : SEC_TONE_OFF);
@@ -350,8 +341,7 @@ static int dvbsat_diseqc_set_input(struct dvb_v5_fe_parms *parms, uint16_t t)
int dvb_sat_set_parms(struct dvb_v5_fe_parms *parms)
{
const struct dvb_sat_lnb *lnb = parms->lnb;
- enum dvb_sat_polarization pol;
- dvb_fe_retrieve_parm(parms, DTV_POLARIZATION, &pol);
+ enum dvb_sat_polarization pol = parms->pol;
uint32_t freq;
uint16_t t = 0;
/*uint32_t voltage = SEC_VOLTAGE_18;*/
@@ -125,9 +125,6 @@ const unsigned int sys_dvbs_props[] = {
DTV_INVERSION,
DTV_SYMBOL_RATE,
DTV_INNER_FEC,
- /*DTV_VOLTAGE,*/
- /*DTV_TONE,*/
- DTV_POLARIZATION,
0
};
@@ -136,12 +133,9 @@ const unsigned int sys_dvbs2_props[] = {
DTV_INVERSION,
DTV_SYMBOL_RATE,
DTV_INNER_FEC,
- /*DTV_VOLTAGE,*/
- /*DTV_TONE,*/
DTV_MODULATION,
DTV_PILOT,
DTV_ROLLOFF,
- DTV_POLARIZATION,
0
};
@@ -150,8 +144,6 @@ const unsigned int sys_turbo_props[] = {
DTV_INVERSION,
DTV_SYMBOL_RATE,
DTV_INNER_FEC,
- DTV_VOLTAGE,
- DTV_TONE,
DTV_MODULATION,
0
};
@@ -161,7 +153,6 @@ const unsigned int sys_isdbs_props[] = {
DTV_INVERSION,
DTV_SYMBOL_RATE,
DTV_INNER_FEC,
- DTV_VOLTAGE,
DTV_ISDBS_TS_ID_LEGACY,
0
};
Apply polarization parameters even if a satellite number is not provided. The polarization is fetched from struct dvb_v5_fe_parms directly and not from the parameter DTV_POLARIZATION. Since DTV_VOLTAGE and DTV_TONE are set according the polarization, those parameters are removed from the props structures in dvb-v5-std.c. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>