@@ -918,8 +918,8 @@ Note: This value cannot be determined by an automatic channel search.
.. _isdb-hierq-layers:
-DTV-ISDBT-LAYER* parameters
-===========================
+DTV-ISDBT-LAYER[A-C] parameters
+===============================
ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
ISDB-T hierarchical layers can be decoded simultaneously. For that
@@ -951,21 +951,21 @@ In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled
accordingly.
-Possible values: 0x1, 0x2, 0x4 (|-able)
+Only the values of the first 3 bits are used. Other bits will be silently ignored:
-``DTV_ISDBT_LAYER_ENABLED[0:0]`` - layer A
+``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled
-``DTV_ISDBT_LAYER_ENABLED[1:1]`` - layer B
+``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled
-``DTV_ISDBT_LAYER_ENABLED[2:2]`` - layer C
+``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled
-``DTV_ISDBT_LAYER_ENABLED[31:3]`` unused
+``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused
.. _DTV-ISDBT-LAYER-FEC:
-DTV_ISDBT_LAYER*_FEC
---------------------
+DTV_ISDBT_LAYER[A-C]_FEC
+------------------------
Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``,
``FEC_5_6``, ``FEC_7_8``
@@ -973,8 +973,8 @@ Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``,
.. _DTV-ISDBT-LAYER-MODULATION:
-DTV_ISDBT_LAYER*_MODULATION
----------------------------
+DTV_ISDBT_LAYER[A-C]_MODULATION
+-------------------------------
Possible values: ``QAM_AUTO``, QP\ ``SK, QAM_16``, ``QAM_64``, ``DQPSK``
@@ -985,13 +985,13 @@ Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is
.. _DTV-ISDBT-LAYER-SEGMENT-COUNT:
-DTV_ISDBT_LAYER*_SEGMENT_COUNT
-------------------------------
+DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT
+----------------------------------
Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)
Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and
-``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER`` *_SEGMENT_COUNT
+``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT``
.. _isdbt-layer_seg-cnt-table:
@@ -1075,8 +1075,8 @@ Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and
.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING:
-DTV_ISDBT_LAYER*_TIME_INTERLEAVING
-----------------------------------
+DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING
+--------------------------------------
Valid values: 0, 1, 2, 4, -1 (AUTO)
@@ -1096,7 +1096,7 @@ TMCC-structure, as shown in the table below.
- .. row 1
- - DTV_ISDBT_LAYER*_TIME_INTERLEAVING
+ - ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING``
- Mode 1 (2K FFT)
The asterisks cause parsing warnings with Sphinx: Documentation/linux_tv/media/dvb/fe_property_parameters.rst:954: WARNING: Inline substitution_reference start-string without end-string. /devel/v4l/patchwork/Documentation/linux_tv/media/dvb/fe_property_parameters.rst:993: WARNING: Inline emphasis start-string without end-string. On the first warning, the ISDB-T layer enabled description is a kind of ackward. Improve it. For the second one, IMHO, it is clearer to use [A-C], as it shows what are the real possibilities, than using asterisk. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- .../linux_tv/media/dvb/fe_property_parameters.rst | 34 +++++++++++----------- 1 file changed, 17 insertions(+), 17 deletions(-)