@@ -557,7 +557,7 @@ static int ov2722_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
ret = ov2722_g_fnumber_range(&dev->sd, &ctrl->val);
break;
case V4L2_CID_LINK_FREQ:
- val = ov2722_res[dev->fmt_idx].mipi_freq;
+ val = dev->res->mipi_freq;
if (val == 0)
return -EINVAL;
@@ -782,76 +782,6 @@ static int ov2722_s_power(struct v4l2_subdev *sd, int on)
return ret;
}
-/*
- * distance - calculate the distance
- * @res: resolution
- * @w: width
- * @h: height
- *
- * Get the gap between resolution and w/h.
- * res->width/height smaller than w/h wouldn't be considered.
- * Returns the value of gap or -1 if fail.
- */
-#define LARGEST_ALLOWED_RATIO_MISMATCH 800
-static int distance(struct ov2722_resolution *res, u32 w, u32 h)
-{
- unsigned int w_ratio = (res->width << 13) / w;
- unsigned int h_ratio;
- int match;
-
- if (h == 0)
- return -1;
- h_ratio = (res->height << 13) / h;
- if (h_ratio == 0)
- return -1;
- match = abs(((w_ratio << 13) / h_ratio) - 8192);
-
- if ((w_ratio < 8192) || (h_ratio < 8192) ||
- (match > LARGEST_ALLOWED_RATIO_MISMATCH))
- return -1;
-
- return w_ratio + h_ratio;
-}
-
-/* Return the nearest higher resolution index */
-static int nearest_resolution_index(int w, int h)
-{
- int i;
- int idx = -1;
- int dist;
- int min_dist = INT_MAX;
- struct ov2722_resolution *tmp_res = NULL;
-
- for (i = 0; i < N_RES; i++) {
- tmp_res = &ov2722_res[i];
- dist = distance(tmp_res, w, h);
- if (dist == -1)
- continue;
- if (dist < min_dist) {
- min_dist = dist;
- idx = i;
- }
- }
-
- return idx;
-}
-
-static int get_resolution_index(int w, int h)
-{
- int i;
-
- for (i = 0; i < N_RES; i++) {
- if (w != ov2722_res[i].width)
- continue;
- if (h != ov2722_res[i].height)
- continue;
-
- return i;
- }
-
- return -1;
-}
-
/* TODO: remove it. */
static int startup(struct v4l2_subdev *sd)
{
@@ -866,7 +796,7 @@ static int startup(struct v4l2_subdev *sd)
return ret;
}
- ret = ov2722_write_reg_array(client, ov2722_res[dev->fmt_idx].regs);
+ ret = ov2722_write_reg_array(client, dev->res->regs);
if (ret) {
dev_err(&client->dev, "ov2722 write register err.\n");
return ret;
@@ -882,9 +812,9 @@ static int ov2722_set_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *fmt = &format->format;
struct ov2722_device *dev = to_ov2722_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct ov2722_resolution *res;
struct camera_mipi_info *ov2722_info = NULL;
int ret = 0;
- int idx;
if (format->pad)
return -EINVAL;
@@ -895,15 +825,16 @@ static int ov2722_set_fmt(struct v4l2_subdev *sd,
return -EINVAL;
mutex_lock(&dev->input_lock);
- idx = nearest_resolution_index(fmt->width, fmt->height);
- if (idx == -1) {
- /* return the largest resolution */
- fmt->width = ov2722_res[N_RES - 1].width;
- fmt->height = ov2722_res[N_RES - 1].height;
- } else {
- fmt->width = ov2722_res[idx].width;
- fmt->height = ov2722_res[idx].height;
- }
+ res = v4l2_find_nearest_size(ov2722_res_preview,
+ ARRAY_SIZE(ov2722_res_preview), width,
+ height, fmt->width, fmt->height);
+ if (!res)
+ res = &ov2722_res_preview[N_RES - 1];
+
+ fmt->width = res->width;
+ fmt->height = res->height;
+ dev->res = res;
+
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
sd_state->pads->try_fmt = *fmt;
@@ -911,15 +842,9 @@ static int ov2722_set_fmt(struct v4l2_subdev *sd,
return 0;
}
- dev->fmt_idx = get_resolution_index(fmt->width, fmt->height);
- if (dev->fmt_idx == -1) {
- dev_err(&client->dev, "get resolution fail\n");
- mutex_unlock(&dev->input_lock);
- return -EINVAL;
- }
- dev->pixels_per_line = ov2722_res[dev->fmt_idx].pixels_per_line;
- dev->lines_per_frame = ov2722_res[dev->fmt_idx].lines_per_frame;
+ dev->pixels_per_line = dev->res->pixels_per_line;
+ dev->lines_per_frame = dev->res->lines_per_frame;
ret = startup(sd);
if (ret) {
@@ -950,8 +875,7 @@ static int ov2722_set_fmt(struct v4l2_subdev *sd,
}
}
- ret = ov2722_get_intg_factor(client, ov2722_info,
- &ov2722_res[dev->fmt_idx]);
+ ret = ov2722_get_intg_factor(client, ov2722_info, dev->res);
if (ret)
dev_err(&client->dev, "failed to get integration_factor\n");
@@ -972,8 +896,8 @@ static int ov2722_get_fmt(struct v4l2_subdev *sd,
if (!fmt)
return -EINVAL;
- fmt->width = ov2722_res[dev->fmt_idx].width;
- fmt->height = ov2722_res[dev->fmt_idx].height;
+ fmt->width = dev->res->width;
+ fmt->height = dev->res->height;
fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
return 0;
@@ -1098,7 +1022,7 @@ static int ov2722_g_frame_interval(struct v4l2_subdev *sd,
struct ov2722_device *dev = to_ov2722_sensor(sd);
interval->interval.numerator = 1;
- interval->interval.denominator = ov2722_res[dev->fmt_idx].fps;
+ interval->interval.denominator = dev->res->fps;
return 0;
}
@@ -1136,7 +1060,7 @@ static int ov2722_g_skip_frames(struct v4l2_subdev *sd, u32 *frames)
struct ov2722_device *dev = to_ov2722_sensor(sd);
mutex_lock(&dev->input_lock);
- *frames = ov2722_res[dev->fmt_idx].skip_frames;
+ *frames = dev->res->skip_frames;
mutex_unlock(&dev->input_lock);
return 0;
@@ -1220,7 +1144,7 @@ static int ov2722_probe(struct i2c_client *client)
mutex_init(&dev->input_lock);
- dev->fmt_idx = 0;
+ dev->res = &ov2722_res_preview[0];
v4l2_i2c_subdev_init(&dev->sd, client, &ov2722_ops);
ovpdev = gmin_camera_platform_data(&dev->sd,
@@ -201,14 +201,13 @@ struct ov2722_device {
struct media_pad pad;
struct v4l2_mbus_framefmt format;
struct mutex input_lock;
+ struct ov2722_resolution *res;
struct camera_sensor_platform_data *platform_data;
int vt_pix_clk_freq_mhz;
- int fmt_idx;
int run_mode;
u16 pixels_per_line;
u16 lines_per_frame;
- u8 res;
u8 type;
struct v4l2_ctrl_handler ctrl_handler;
Instead of reinventing the wheel, use v4l2_find_nearest_size() in order to get the closest resolution. This should address a bug where the wrong resolution was selected. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../media/atomisp/i2c/atomisp-ov2722.c | 118 ++++-------------- drivers/staging/media/atomisp/i2c/ov2722.h | 3 +- 2 files changed, 22 insertions(+), 99 deletions(-)