@@ -38,7 +38,7 @@ struct v4l2_ctrl_handler;
* @lock: lock this struct; can be used by the driver as well
* if this struct is embedded into a larger struct.
* @name: unique device name, by default the driver name + bus ID
- * @notify: notify callback called by some sub-devices.
+ * @notify: notify operation called by some sub-devices.
* @ctrl_handler: The control handler. May be %NULL.
* @prio: Device's priority state
* @ref: Keep track of the references to this struct.
@@ -56,7 +56,6 @@ struct v4l2_ctrl_handler;
* #) @dev->driver_data points to this struct.
* #) @dev might be %NULL if there is no parent device
*/
-
struct v4l2_device {
struct device *dev;
#if defined(CONFIG_MEDIA_CONTROLLER)
@@ -166,7 +165,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev);
* v4l2_device_register_subdev - Registers a subdev with a v4l2 device.
*
* @v4l2_dev: pointer to struct &v4l2_device
- * @sd: pointer to struct &v4l2_subdev
+ * @sd: pointer to &struct v4l2_subdev
*
* While registered, the subdev module is marked as in-use.
*
@@ -179,7 +178,7 @@ int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
/**
* v4l2_device_unregister_subdev - Unregisters a subdev with a v4l2 device.
*
- * @sd: pointer to struct &v4l2_subdev
+ * @sd: pointer to &struct v4l2_subdev
*
* .. note ::
*
@@ -201,7 +200,7 @@ v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev);
/**
* v4l2_subdev_notify - Sends a notification to v4l2_device.
*
- * @sd: pointer to struct &v4l2_subdev
+ * @sd: pointer to &struct v4l2_subdev
* @notification: type of notification. Please notice that the notification
* type is driver-specific.
* @arg: arguments for the notification. Those are specific to each
@@ -214,13 +213,43 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
sd->v4l2_dev->notify(sd, notification, arg);
}
-/* Iterate over all subdevs. */
+/* Helper macros to iterate over all subdevs. */
+
+/**
+ * v4l2_device_for_each_subdev - Helper macro that interates over all
+ * sub-devices of a given &v4l2_device.
+ *
+ * @sd: pointer that will be filled by the macro with all
+ * &struct v4l2_subdev pointer used as an iterator by the loop.
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ *
+ * This macro iterates over all sub-devices owned by the @v4l2_dev device.
+ * It acts as a for loop iterator and executes the next statement with
+ * the @sd variable pointing to each sub-device in turn.
+ */
#define v4l2_device_for_each_subdev(sd, v4l2_dev) \
list_for_each_entry(sd, &(v4l2_dev)->subdevs, list)
-/* Call the specified callback for all subdevs matching the condition.
- Ignore any errors. Note that you cannot add or delete a subdev
- while walking the subdevs list. */
+/**
+ * __v4l2_device_call_subdevs_p - Calls the specified operation for
+ * all subdevs matching the condition.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @sd: pointer that will be filled by the macro with all
+ * &struct v4l2_subdev pointer used as an iterator by the loop.
+ * @cond: condition to be match
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Ignore any errors.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
+ */
#define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...) \
do { \
list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) \
@@ -228,6 +257,24 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
(sd)->ops->o->f((sd) , ##args); \
} while (0)
+/**
+ * __v4l2_device_call_subdevs - Calls the specified operation for
+ * all subdevs matching the condition.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @cond: condition to be match
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Ignore any errors.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
+ */
#define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...) \
do { \
struct v4l2_subdev *__sd; \
@@ -236,10 +283,30 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
f , ##args); \
} while (0)
-/* Call the specified callback for all subdevs matching the condition.
- If the callback returns an error other than 0 or -ENOIOCTLCMD, then
- return with that error code. Note that you cannot add or delete a
- subdev while walking the subdevs list. */
+/**
+ * __v4l2_device_call_subdevs_until_err_p - Calls the specified operation for
+ * all subdevs matching the condition.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @sd: pointer that will be filled by the macro with all
+ * &struct v4l2_subdev sub-devices associated with @v4l2_dev.
+ * @cond: condition to be match
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Return:
+ *
+ * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
+ * for any subdevice, then abort and return with that error code, zero
+ * otherwise.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
+ */
#define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \
({ \
long __err = 0; \
@@ -253,6 +320,28 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
(__err == -ENOIOCTLCMD) ? 0 : __err; \
})
+/**
+ * __v4l2_device_call_subdevs_until_err - Calls the specified operation for
+ * all subdevs matching the condition.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @cond: condition to be match
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Return:
+ *
+ * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
+ * for any subdevice, then abort and return with that error code,
+ * zero otherwise.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
+ */
#define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \
({ \
struct v4l2_subdev *__sd; \
@@ -260,9 +349,26 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
f , ##args); \
})
-/* Call the specified callback for all subdevs matching grp_id (if 0, then
- match them all). Ignore any errors. Note that you cannot add or delete
- a subdev while walking the subdevs list. */
+/**
+ * v4l2_device_call_all - Calls the specified operation for
+ * all subdevs matching the &v4l2_subdev.grp_id, as assigned
+ * by the bridge driver.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @grpid: &struct v4l2_subdev->grp_id group ID to match.
+ * Use 0 to match them all.
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Ignore any errors.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
+ */
#define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...) \
do { \
struct v4l2_subdev *__sd; \
@@ -272,10 +378,30 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
##args); \
} while (0)
-/* Call the specified callback for all subdevs matching grp_id (if 0, then
- match them all). If the callback returns an error other than 0 or
- -ENOIOCTLCMD, then return with that error code. Note that you cannot
- add or delete a subdev while walking the subdevs list. */
+/**
+ * v4l2_device_call_until_err - Calls the specified operation for
+ * all subdevs matching the &v4l2_subdev.grp_id, as assigned
+ * by the bridge driver, until an error occurs.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @grpid: &struct v4l2_subdev->grp_id group ID to match.
+ * Use 0 to match them all.
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Return:
+ *
+ * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
+ * for any subdevice, then abort and return with that error code,
+ * zero otherwise.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
+ */
#define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...) \
({ \
struct v4l2_subdev *__sd; \
@@ -284,10 +410,24 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
##args); \
})
-/*
- * Call the specified callback for all subdevs where grp_id & grpmsk != 0
- * (if grpmsk == `0, then match them all). Ignore any errors. Note that you
- * cannot add or delete a subdev while walking the subdevs list.
+/**
+ * v4l2_device_mask_call_all - Calls the specified operation for
+ * all subdevices where a group ID matches a specified bitmask.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
+ * group ID to be matched. Use 0 to match them all.
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Ignore any errors.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
*/
#define v4l2_device_mask_call_all(v4l2_dev, grpmsk, o, f, args...) \
do { \
@@ -298,11 +438,28 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
##args); \
} while (0)
-/*
- * Call the specified callback for all subdevs where grp_id & grpmsk != 0
- * (if grpmsk == 0, then match them all). If the callback returns an error
- * other than 0 or %-ENOIOCTLCMD, then return with that error code. Note that
- * you cannot add or delete a subdev while walking the subdevs list.
+/**
+ * v4l2_device_mask_call_until_err - Calls the specified operation for
+ * all subdevices where a group ID matches a specified bitmask.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
+ * group ID to be matched. Use 0 to match them all.
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
+ * @args...: arguments for @f.
+ *
+ * Return:
+ *
+ * If the operation returns an error other than 0 or ``-ENOIOCTLCMD``
+ * for any subdevice, then abort and return with that error code,
+ * zero otherwise.
+ *
+ * Note: subdevs cannot be added or deleted while walking
+ * the subdevs list.
*/
#define v4l2_device_mask_call_until_err(v4l2_dev, grpmsk, o, f, args...) \
({ \
@@ -312,9 +469,19 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
##args); \
})
-/*
- * Does any subdev with matching grpid (or all if grpid == 0) has the given
- * op?
+
+/**
+ * v4l2_device_has_op - checks if any subdev with matching grpid has a
+ * given ops.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @grpid: &struct v4l2_subdev->grp_id group ID to match.
+ * Use 0 to match them all.
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
*/
#define v4l2_device_has_op(v4l2_dev, grpid, o, f) \
({ \
@@ -331,9 +498,18 @@ static inline void v4l2_subdev_notify(struct v4l2_subdev *sd,
__result; \
})
-/*
- * Does any subdev with matching grpmsk (or all if grpmsk == 0) has the given
- * op?
+/**
+ * v4l2_device_mask_has_op - checks if any subdev with matching group
+ * mask has a given ops.
+ *
+ * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over.
+ * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id
+ * group ID to be matched. Use 0 to match them all.
+ * @o: name of the element at &struct v4l2_subdev_ops that contains @f.
+ * Each element there groups a set of operations functions.
+ * @f: operation function that will be called if @cond matches.
+ * The operation functions are defined in groups, according to
+ * each element at &struct v4l2_subdev_ops.
*/
#define v4l2_device_mask_has_op(v4l2_dev, grpmsk, o, f) \
({ \