@@ -23,6 +23,7 @@
depends on VIDEO_MEDIA && I2C
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+ select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE
@@ -152,6 +153,15 @@
This device is only used inside a SiP called together with a
demodulator for now.
+config MEDIA_TUNER_XC4000
+ tristate "Xceive XC4000 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ A driver for the silicon tuner XC4000 from Xceive.
+ This device is only used inside a SiP called together with a
+ demodulator for now.
+
config MEDIA_TUNER_MXL5005S
tristate "MaxLinear MSL5005S silicon tuner"
depends on VIDEO_MEDIA && I2C
@@ -16,6 +16,7 @@
obj-$(CONFIG_MEDIA_TUNER_TDA827X) += tda827x.o
obj-$(CONFIG_MEDIA_TUNER_TDA18271) += tda18271.o
obj-$(CONFIG_MEDIA_TUNER_XC5000) += xc5000.o
+obj-$(CONFIG_MEDIA_TUNER_XC4000) += xc4000.o
obj-$(CONFIG_MEDIA_TUNER_MT2060) += mt2060.o
obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
@@ -1805,6 +1805,10 @@
.name = "Xceive 5000 tuner",
/* see xc5000.c for details */
},
+ [TUNER_XC4000] = { /* Xceive 4000 */
+ .name = "Xceive 4000 tuner",
+ /* see xc4000.c for details */
+ },
[TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */
.name = "TCL tuner MF02GIP-5N-E",
.params = tuner_tcl_mf02gip_5n_params,
@@ -81,6 +81,7 @@
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+ select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
@@ -17,6 +17,7 @@
#include "mt2266.h"
#include "tuner-xc2028.h"
#include "xc5000.h"
+#include "xc4000.h"
#include "s5h1411.h"
#include "dib0070.h"
#include "dib0090.h"
@@ -2656,6 +2657,146 @@
== NULL ? -ENODEV : 0;
}
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+ int command, int arg)
+{
+ struct dvb_usb_adapter *adap = priv;
+
+ if (command == XC4000_TUNER_RESET) {
+ /* Reset the tuner */
+ dib7000p_set_gpio(adap->fe, 8, 0, 0);
+ msleep(10);
+ dib7000p_set_gpio(adap->fe, 8, 0, 1);
+ } else {
+ err("xc4000: unknown tuner callback command: %d\n", command);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+ .band_caps = BAND_UHF | BAND_VHF,
+ .setup = 0x64,
+ .inv_gain = 0x02c8,
+ .time_stabiliz = 0x15,
+ .alpha_level = 0x00,
+ .thlock = 0x76,
+ .wbd_inv = 0x01,
+ .wbd_ref = 0x0b33,
+ .wbd_sel = 0x00,
+ .wbd_alpha = 0x02,
+ .agc1_max = 0x00,
+ .agc1_slope2 = 0x00,
+ .agc2_pt1 = 0x00,
+ .agc2_pt2 = 0x80,
+ .agc2_slope1 = 0x1d,
+ .agc2_slope2 = 0x1d,
+ .alpha_mant = 0x11,
+ .alpha_exp = 0x1b,
+ .beta_mant = 0x17,
+ .beta_exp = 0x33,
+ .perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+ 60000, 30000, // internal, sampling
+ 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+ 0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+ (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+ 39370534, // ifreq
+ 20452225, // timf
+ 30000000, // xtal
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &stk7700p_7000p_xc4000_agc_config,
+ .bw = &stk7700p_xc4000_pll_config,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+ dib0700:
+ GPIO2 - CX25843 sleep
+ GPIO3 - CS5340 reset
+ GPIO5 - IRD
+ GPIO6 - Power Supply
+ GPIO8 - LNA (1=off 0=on)
+ GPIO10 - CX25843 reset
+ dib7000:
+ GPIO8 - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_state *st = adap->dev->priv;
+
+ /* Power Supply on */
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ msleep(50);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(100); /* Allow power supply to settle before probing */
+
+ /* cx25843 reset */
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ msleep(1); /* cx25843 datasheet say 350us required */
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+
+ /* LNA off for now */
+ dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1);
+
+ /* Put the CX25843 to sleep for now since we're in digital mode */
+ dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+ /* FIXME: not verified yet */
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(500);
+
+ if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+ /* Demodulator not found for some reason? */
+ return -ENODEV;
+ }
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
+ &pctv_340e_config);
+ st->is_dib7000pc = 1;
+
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+ .i2c_address = 0x61,
+ .if_khz = 5400,
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct i2c_adapter *tun_i2c;
+
+ /* The xc4000 is not on the main i2c bus */
+ tun_i2c = dib7000p_get_i2c_master(adap->fe,
+ DIBX000_I2C_INTERFACE_TUNER, 1);
+ if (tun_i2c == NULL) {
+ printk("Could not reach tuner i2c bus\n");
+ return 0;
+ }
+
+ /* Setup the reset callback */
+ adap->fe->callback = dib0700_xc4000_tuner_callback;
+
+ return dvb_attach(xc4000_attach, adap->fe, tun_i2c,
+ &dib7000p_xc4000_tunerconfig)
+ == NULL ? -ENODEV : 0;
+}
+
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_PARALLEL,
@@ -2802,6 +2943,8 @@
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) },
{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -3768,6 +3911,42 @@
RC_TYPE_NEC,
.change_protocol = dib0700_change_protocol,
},
+ },{ DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .frontend_attach = pctv340e_frontend_attach,
+ .tuner_attach = xc4000_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+ .size_of_priv = sizeof(struct
+ dib0700_adapter_state),
+ },
+ },
+
+ .num_device_descs = 2,
+ .devices = {
+ { "Pinnacle PCTV 340e HD Pro USB Stick",
+ { &dib0700_usb_id_table[75], NULL },
+ { NULL },
+ },
+ { "Pinnacle PCTV Hybrid Stick Solo",
+ { &dib0700_usb_id_table[76], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_TYPE_RC5 |
+ RC_TYPE_RC6 |
+ RC_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
},
};
@@ -233,6 +233,8 @@
#define USB_PID_PINNACLE_PCTV73ESE 0x0245
#define USB_PID_PINNACLE_PCTV74E 0x0246
#define USB_PID_PINNACLE_PCTV282E 0x0248
+#define USB_PID_PINNACLE_PCTV340E 0x023d
+#define USB_PID_PINNACLE_PCTV340E_SE 0x023e
#define USB_PID_PIXELVIEW_SBTVD 0x5010
#define USB_PID_PCTV_200E 0x020e
#define USB_PID_PCTV_400E 0x020f
@@ -38,6 +38,7 @@
#include "tuner-simple.h"
#include "tda9887.h"
#include "xc5000.h"
+#include "xc4000.h"
#include "tda18271.h"
#define UNSET (-1U)
@@ -377,6 +378,19 @@
goto attach_failed;
tune_now = 0;
break;
+ }
+ case TUNER_XC4000:
+ {
+ struct xc4000_config xc4000_cfg = {
+ .i2c_address = t->i2c->addr,
+ /* if_khz will be set when the digital dvb_attach() occurs */
+ .if_khz = 0,
+ };
+ if (!dvb_attach(xc4000_attach,
+ &t->fe, t->i2c->adapter, &xc4000_cfg))
+ goto attach_failed;
+ tune_now = 0;
+ break;
}
case TUNER_NXP_TDA18271:
{
@@ -264,7 +264,7 @@
{ TUNER_XC5000, "Xceive XC5000"},
{ TUNER_ABSENT, "Xceive XC3028L"},
{ TUNER_ABSENT, "NXP 18271C2_716x"},
- { TUNER_ABSENT, "Xceive XC4000"},
+ { TUNER_XC4000, "Xceive XC4000"},
{ TUNER_ABSENT, "Dibcom 7070"},
{ TUNER_PHILIPS_TDA8290, "NXP 18271C2"},
{ TUNER_ABSENT, "unknown"},