[v3,0/4] Add Support for MediaTek MT2712 RTC

Message

Ran Bi Feb. 26, 2020, 5:12 a.m. UTC

This patchset add support to MT2712 RTC. MT2712 RTC is a SoC based RTC
with different architecture compared to MT7622 RTC.

Changes in V3:
1. change struct mt2712_rtc
2. use 100 as year offset
3. change irq handle thread
4. remove useless rtc time check
5. not modify struct rtc_time in set_time/set_alarm functions
6. modify rtc init function
7. add power lost flag for get_time/set_time functions
8. add .alarm_irq_enable callback
9. set rtc->range_min and rtc->range_max to do range checking
10. use fixed driver name

Changes in V2:
1. change minimum year from 1968 to 2000
2. fix lock usage
3. stop to calculate useless day of week
4. stop to set default date after init
5. change the prefix of functions
6. use devm_request_threaded_irq() to replace request_threaded_irq()
7. add mt2712 rtc related files into MAINTAINERS

Ran Bi (4):
  bindings: rtc: add bindings for MT2712 RTC
  rtc: add support for the MediaTek MT2712 RTC
  arm64: dts: add RTC nodes for MT2712
  MAINTAINERS: add MT2712 RTC files

 .../devicetree/bindings/rtc/rtc-mt2712.txt    |  14 +
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi     |   6 +
 drivers/rtc/Kconfig                           |  10 +
 drivers/rtc/Makefile                          |   1 +
 drivers/rtc/rtc-mt2712.c                      | 422 ++++++++++++++++++
 6 files changed, 455 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
 create mode 100644 drivers/rtc/rtc-mt2712.c

Comments

Alexandre Belloni March 14, 2020, 12:24 p.m. UTC | #1

On 26/02/2020 13:12:59+0800, Ran Bi wrote:
> This patchset add support to MT2712 RTC. MT2712 RTC is a SoC based RTC
> with different architecture compared to MT7622 RTC.
> 
> Changes in V3:
> 1. change struct mt2712_rtc
> 2. use 100 as year offset
> 3. change irq handle thread
> 4. remove useless rtc time check
> 5. not modify struct rtc_time in set_time/set_alarm functions
> 6. modify rtc init function
> 7. add power lost flag for get_time/set_time functions
> 8. add .alarm_irq_enable callback
> 9. set rtc->range_min and rtc->range_max to do range checking
> 10. use fixed driver name
> 
> Changes in V2:
> 1. change minimum year from 1968 to 2000
> 2. fix lock usage
> 3. stop to calculate useless day of week
> 4. stop to set default date after init
> 5. change the prefix of functions
> 6. use devm_request_threaded_irq() to replace request_threaded_irq()
> 7. add mt2712 rtc related files into MAINTAINERS
> 
> Ran Bi (4):
>   bindings: rtc: add bindings for MT2712 RTC
>   rtc: add support for the MediaTek MT2712 RTC
>   arm64: dts: add RTC nodes for MT2712
>   MAINTAINERS: add MT2712 RTC files
> 

Applied 1,2 and 4, thanks!