| Message ID | 20220525015140.384-1-axe.yang@mediatek.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | mmc: mediatek: add support for SDIO async IRQ | expand |
Hi, Gentle ping for this set. On Wed, 2022-05-25 at 09:51 +0800, Axe Yang wrote: > Changes in v12: > - assign NULL to pins_eint directly instead of using kfree() > > Changes in v11: > - remove '_irq' suffix in interrupts-names property > - fix yaml example build error > - refactor msdc_enable_sdio_irq(), free pins_eint if async irq is not > supported > > Changes in v10: > - add sample node for SDIO host which support wakeup interrupt in > yaml > - skip MMC_PM_WAKE_SDIO_IRQ check before enable SDIO async interrupt > - add MMC_PM_KEEP_POWER check before SDIO eint pinstate parsing > - use dev_pm_set_dedicated_wake_irq_reverse() to correct irq control > sequence > - set dedicated irq in msdc_enable_sdio_irq() rather than > msdc_drv_probe() > - remove unnecessary wake irq control, rpm/dpm system shall manage > that > - move wake irq/msdc irq control back to system suspend phase, use > rpm_suspend > and rpm_resume to ensure irq control sequence: > disable msdc irq -> enable wake irq -> disable wake irq -> > enable msdc irq > - simplify variables, check pins_eint to know whether wakeup settings > are managed > > Changes in v9: > - remove pinctrl "state_dat1" > > Changes in v8: > - remove maxItems property under pinctrl-names property > > Changes in v7: > - add device_init_wakeup() to register SDIO host as wakeup source > > Changes in v6: > - abandon cap-sdio-async-irq flag, use wakeup-source flag instead > - extend interrupts and pinctrls in mediatek mmc host controller DT > documents > - add mmc_card_enable_async_irq() to access enable_async_irq flag > - simplify wakeup irq implementation with dedicate wake up irq > related interface > > Changes in v5: > - resort variables to reversed xmas tree order > - restore old copyright year range and add current year back > > Changes in v4: > - add MMC_CAP2_SDIO_ASYNC_IRQ judge before lookup eint pinctrl > - replace spin_lock_irqsave() variant with spin_lock() in eint irq > handler > > Changes in v3: > - correct abbreviations with capital letters in commit message > - replace copyright year with 2022 in mtk-sd.c > - remove unnessary pointer casting > - adjust variable order to reversed xmas tree > - remove a redundant blank line > - refine if statement, following standard pattern > > Changes in v2: > - change flag name from 'cap-sdio-async-int' to 'cap-sdio-async-irq' > - change corresponding macro names from xxx_INT to xxx_IRQ > - resort new member in msdc_host structure > - refine function msdc_request_dat1_eint_irq() > - rename msdc_{suspend,resume} function names, add suffix '_noirq' > - add MMC_CAP2_NO_SDIO judgement before parse eint related pin > setting > > Axe Yang (3): > dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties > mmc: core: Add support for SDIO wakeup interrupt > mmc: mediatek: add support for SDIO eint wakup IRQ > > .../devicetree/bindings/mmc/mtk-sd.yaml | 50 +++++++++++- > drivers/mmc/core/sdio.c | 14 ++++ > drivers/mmc/host/mtk-sd.c | 80 > +++++++++++++++++-- > include/linux/mmc/card.h | 8 +- > include/linux/mmc/sdio.h | 5 ++ > 5 files changed, 149 insertions(+), 8 deletions(-) >
On Thu, Jun 02, 2022 at 02:07:04PM +0800, Axe Yang wrote: > Hi, > > Gentle ping for this set. It's a merge window, so your code perhaps will be considered next week, or later.
On Thu, 2022-06-02 at 14:10 +0300, Andy Shevchenko wrote: > On Thu, Jun 02, 2022 at 02:07:04PM +0800, Axe Yang wrote: > > Hi, > > > > Gentle ping for this set. > > It's a merge window, so your code perhaps will be considered next > week, > or later. > Got it, thanks. Regards, Axe
Changes in v12: - assign NULL to pins_eint directly instead of using kfree() Changes in v11: - remove '_irq' suffix in interrupts-names property - fix yaml example build error - refactor msdc_enable_sdio_irq(), free pins_eint if async irq is not supported Changes in v10: - add sample node for SDIO host which support wakeup interrupt in yaml - skip MMC_PM_WAKE_SDIO_IRQ check before enable SDIO async interrupt - add MMC_PM_KEEP_POWER check before SDIO eint pinstate parsing - use dev_pm_set_dedicated_wake_irq_reverse() to correct irq control sequence - set dedicated irq in msdc_enable_sdio_irq() rather than msdc_drv_probe() - remove unnecessary wake irq control, rpm/dpm system shall manage that - move wake irq/msdc irq control back to system suspend phase, use rpm_suspend and rpm_resume to ensure irq control sequence: disable msdc irq -> enable wake irq -> disable wake irq -> enable msdc irq - simplify variables, check pins_eint to know whether wakeup settings are managed Changes in v9: - remove pinctrl "state_dat1" Changes in v8: - remove maxItems property under pinctrl-names property Changes in v7: - add device_init_wakeup() to register SDIO host as wakeup source Changes in v6: - abandon cap-sdio-async-irq flag, use wakeup-source flag instead - extend interrupts and pinctrls in mediatek mmc host controller DT documents - add mmc_card_enable_async_irq() to access enable_async_irq flag - simplify wakeup irq implementation with dedicate wake up irq related interface Changes in v5: - resort variables to reversed xmas tree order - restore old copyright year range and add current year back Changes in v4: - add MMC_CAP2_SDIO_ASYNC_IRQ judge before lookup eint pinctrl - replace spin_lock_irqsave() variant with spin_lock() in eint irq handler Changes in v3: - correct abbreviations with capital letters in commit message - replace copyright year with 2022 in mtk-sd.c - remove unnessary pointer casting - adjust variable order to reversed xmas tree - remove a redundant blank line - refine if statement, following standard pattern Changes in v2: - change flag name from 'cap-sdio-async-int' to 'cap-sdio-async-irq' - change corresponding macro names from xxx_INT to xxx_IRQ - resort new member in msdc_host structure - refine function msdc_request_dat1_eint_irq() - rename msdc_{suspend,resume} function names, add suffix '_noirq' - add MMC_CAP2_NO_SDIO judgement before parse eint related pin setting Axe Yang (3): dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties mmc: core: Add support for SDIO wakeup interrupt mmc: mediatek: add support for SDIO eint wakup IRQ .../devicetree/bindings/mmc/mtk-sd.yaml | 50 +++++++++++- drivers/mmc/core/sdio.c | 14 ++++ drivers/mmc/host/mtk-sd.c | 80 +++++++++++++++++-- include/linux/mmc/card.h | 8 +- include/linux/mmc/sdio.h | 5 ++ 5 files changed, 149 insertions(+), 8 deletions(-)