mbox series

[0/2] media: i2c: Add support for GC08A3 sensor

Message ID 20231123115104.32094-1-zhi.mao@mediatek.com (mailing list archive)
Headers show
Series media: i2c: Add support for GC08A3 sensor | expand

Message

Zhi Mao (毛智) Nov. 23, 2023, 11:51 a.m. UTC
This series adds YAML DT binding and V4L2 sub-device driver for Galaxycore's
GC08A3 8-megapixel 10-bit RAW CMOS 1/4" sensor, with an MIPI CSI-2 image data
interface and the I2C control bus.

The driver is implemented with V4L2 framework.
 - Async registered as a V4L2 sub-device.
 - As the first component of camera system including Seninf, ISP pipeline.
 - A media entity that provides one source pad in common.
 - Used in camera features on ChromeOS application.

Also this driver supports following features:
 - manual exposure and analog gain control support
 - vertical blanking control support
 - test pattern support
 - media controller support
 - runtime PM support
 - support resolution: 3264x2448@30fps, 1920x1080@60fps

Thanks

Zhi Mao (2):
  media: dt-bindings: media: i2c: Document GC08A3 bindings
  media: i2c: Add GC08A3 image sensor driver

 .../bindings/media/i2c/galaxycore,gc08a3.yaml |  128 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/media/i2c/Kconfig                     |   14 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/gc08a3.c                    | 2046 +++++++++++++++++
 5 files changed, 2191 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
 create mode 100644 drivers/media/i2c/gc08a3.c