[v3,00/21] add driver to support secure video decoder

Message

Yunfei Dong Dec. 6, 2023, 8:15 a.m. UTC

The patch series used to enable secure video playback (SVP) on MediaTek
hardware in the Linux kernel.

Memory Definitions:
secure memory - Memory allocated in the TEE (Trusted Execution
Environment) which is inaccessible in the REE (Rich Execution
Environment, i.e. linux kernel/userspace).
secure handle - Integer value which acts as reference to 'secure
memory'. Used in communication between TEE and REE to reference
'secure memory'.
secure buffer - 'secure memory' that is used to store decrypted,
compressed video or for other general purposes in the TEE.
secure surface - 'secure memory' that is used to store graphic buffers.

Memory Usage in SVP:
The overall flow of SVP starts with encrypted video coming in from an
outside source into the REE. The REE will then allocate a 'secure
buffer' and send the corresponding 'secure handle' along with the
encrypted, compressed video data to the TEE. The TEE will then decrypt
the video and store the result in the 'secure buffer'. The REE will
then allocate a 'secure surface'. The REE will pass the 'secure
handles' for both the 'secure buffer' and 'secure surface' into the
TEE for video decoding. The video decoder HW will then decode the
contents of the 'secure buffer' and place the result in the 'secure
surface'. The REE will then attach the 'secure surface' to the overlay
plane for rendering of the video.

Everything relating to ensuring security of the actual contents of the
'secure buffer' and 'secure surface' is out of scope for the REE and
is the responsibility of the TEE.

This patch series is consists of four parts. The first is from Jeffrey,
adding secure memory flag in v4l2 framework to support request secure
buffer.

The second and third parts are from John and T.J, adding some heap
interfaces, then our kernel users could allocate buffer from special
heap. The patch v1 is inside below dmabuf link.
https://lore.kernel.org/linux-mediatek/[e-mail]/
To avoid confusing, move them into vcodec patchset since we use the
new interfaces directly.

The fourth part is mediatek decoder driver, adding tee interface to
support secure video decoder.

---
Changed in v3:
- rewrite the cover-letter of this patch series
- disable irq for svp mode
- rebase the driver based on the latest media stage

Changed in v2:
- remove setting decoder mode and getting secure handle from decode
- add Jeffrey's patch
- add John and T.J's patch
- getting secure flag with request buffer
- fix some comments from patch v1
---
Jeffrey Kardatzke (4):
  v4l2: add secure memory flags
  v4l2: handle secure memory flags in queue setup
  v4l2: verify secure dmabufs are used in secure queue
  v4l: add documentation for secure memory flag

John Stultz (2):
  dma-heap: Add proper kref handling on dma-buf heaps
  dma-heap: Provide accessors so that in-kernel drivers can allocate
    dmabufs from specific heaps

T.J. Mercier (1):
  dma-buf: heaps: Deduplicate docs and adopt common format

Yunfei Dong (14):
  media: mediatek: vcodec: add tee client interface to communiate with
    optee-os
  media: mediatek: vcodec: allocate tee share memory
  media: mediatek: vcodec: send share memory data to optee
  media: mediatek: vcodec: initialize msg and vsi information
  media: mediatek: vcodec: add interface to allocate/free secure memory
  media: mediatek: vcodec: using shared memory as vsi address
  media: mediatek: vcodec: Add capture format to support one plane
    memory
  media: mediatek: vcodec: Add one plane format
  media: medkatek: vcodec: support one plane capture buffer
  media: medkatek: vcodec: re-construct h264 driver to support svp mode
  media: medkatek: vcodec: remove parse nal_info in kernel
  media: medkatek: vcodec: disable wait interrupt for svp mode
  media: medkatek: vcodec: support tee decoder
  media: mediatek: vcodec: move vdec init interface to setup callback

 .../userspace-api/media/v4l/buffer.rst        |   8 +-
 .../media/v4l/pixfmt-reserved.rst             |   8 +
 drivers/dma-buf/dma-heap.c                    | 139 +++++--
 .../media/common/videobuf2/videobuf2-core.c   |  23 ++
 .../common/videobuf2/videobuf2-dma-contig.c   |   6 +
 .../media/common/videobuf2/videobuf2-dma-sg.c |   6 +
 .../media/common/videobuf2/videobuf2-v4l2.c   |  34 +-
 .../media/platform/mediatek/vcodec/Kconfig    |   1 +
 .../mediatek/vcodec/common/mtk_vcodec_util.c  | 122 +++++-
 .../mediatek/vcodec/common/mtk_vcodec_util.h  |   3 +
 .../platform/mediatek/vcodec/decoder/Makefile |   1 +
 .../mediatek/vcodec/decoder/mtk_vcodec_dec.c  | 155 ++++---
 .../vcodec/decoder/mtk_vcodec_dec_drv.c       |   8 +
 .../vcodec/decoder/mtk_vcodec_dec_drv.h       |   7 +
 .../vcodec/decoder/mtk_vcodec_dec_hw.c        |  34 +-
 .../vcodec/decoder/mtk_vcodec_dec_optee.c     | 383 ++++++++++++++++++
 .../vcodec/decoder/mtk_vcodec_dec_optee.h     | 156 +++++++
 .../vcodec/decoder/mtk_vcodec_dec_pm.c        |   6 +-
 .../vcodec/decoder/mtk_vcodec_dec_stateless.c |  35 +-
 .../decoder/vdec/vdec_h264_req_common.c       |  11 +-
 .../decoder/vdec/vdec_h264_req_multi_if.c     | 334 +++++++++------
 .../mediatek/vcodec/decoder/vdec_drv_if.c     |   4 +-
 .../mediatek/vcodec/decoder/vdec_msg_queue.c  |   9 +-
 .../mediatek/vcodec/decoder/vdec_vpu_if.c     |  57 ++-
 .../mediatek/vcodec/decoder/vdec_vpu_if.h     |   4 +
 drivers/media/v4l2-core/v4l2-common.c         |   2 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |   1 +
 include/linux/dma-heap.h                      |  29 +-
 include/media/videobuf2-core.h                |   8 +-
 include/uapi/linux/videodev2.h                |   3 +
 30 files changed, 1296 insertions(+), 301 deletions(-)
 create mode 100644 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_optee.c
 create mode 100644 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_optee.h