mbox series

[net-next,v2,0/2] Add 2.5G ethernet phy support on MT7988

Message ID 20250219083910.2255981-1-SkyLake.Huang@mediatek.com (mailing list archive)
Headers show
Series Add 2.5G ethernet phy support on MT7988 | expand

Message

Sky Huang Feb. 19, 2025, 8:39 a.m. UTC 
From: Sky Huang <skylake.huang@mediatek.com>

This patchset adds support for built-in 2.5Gphy on MT7988,
corresponding dt-bindings and dts. It's based from previous commit:
https://patchwork.kernel.org/project/linux-mediatek/patch/20250116012159.
3816135-4-SkyLake.Huang@mediatek.com/

Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
---
Change in v2:
- Add missing dt-bindings and dts node.
- Remove mtk_phy_leds_state_init() temporarily. I'm going to add LED support
later.
- Remove "Firmware loading/trigger ok" log.
- Add macro define for 0x800e & 0x800f
---
Sky Huang (3):
  net: phy: mediatek: Add 2.5Gphy firmware dt-bindings and dts node
  dts: mt7988a: Add built-in ethernet phy firmware node
  net: phy: mediatek: add driver for built-in 2.5G ethernet PHY on
    MT7988

 .../bindings/net/mediatek,2p5gphy-fw.yaml     |  37 ++
 MAINTAINERS                                   |   4 +-
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi     |   6 +
 drivers/net/phy/mediatek/Kconfig              |  11 +
 drivers/net/phy/mediatek/Makefile             |   1 +
 drivers/net/phy/mediatek/mtk-2p5ge.c          | 346 ++++++++++++++++++
 6 files changed, 404 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,2p5gphy-fw.yaml
 create mode 100644 drivers/net/phy/mediatek/mtk-2p5ge.c