new file mode 100644
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mmsys controller
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+ The MediaTek mmsys system controller provides clock control, routing control,
+ and miscellaneous control in mmsys partition.
+
+properties:
+ $nodename:
+ pattern: "^syscon@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-mmsys
+ - mediatek,mt2712-mmsys
+ - mediatek,mt6765-mmsys
+ - mediatek,mt6779-mmsys
+ - mediatek,mt6795-mmsys
+ - mediatek,mt6797-mmsys
+ - mediatek,mt8167-mmsys
+ - mediatek,mt8173-mmsys
+ - mediatek,mt8183-mmsys
+ - mediatek,mt8186-mmsys
+ - mediatek,mt8188-vdosys0
+ - mediatek,mt8188-vdosys1
+ - mediatek,mt8188-vppsys0
+ - mediatek,mt8188-vppsys1
+ - mediatek,mt8192-mmsys
+ - mediatek,mt8195-vdosys1
+ - mediatek,mt8195-vppsys0
+ - mediatek,mt8195-vppsys1
+ - mediatek,mt8365-mmsys
+ - const: syscon
+
+ - description: vdosys0 and vdosys1 are 2 display HW pipelines,
+ so mt8195 binding should be deprecated.
+ deprecated: true
+ items:
+ - const: mediatek,mt8195-mmsys
+ - const: syscon
+
+ - items:
+ - const: mediatek,mt7623-mmsys
+ - const: mediatek,mt2701-mmsys
+ - const: syscon
+
+ - items:
+ - const: mediatek,mt8195-vdosys0
+ - const: mediatek,mt8195-mmsys
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier as defined by bindings
+ of the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ mboxes:
+ description:
+ Using mailbox to communicate with GCE, it should have this
+ property and list of phandle, mailbox specifiers. See
+ Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+ for details.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ mediatek,gce-client-reg:
+ description:
+ The register of client driver can be configured by gce with 4 arguments
+ defined in this property, such as phandle of gce, subsys id,
+ register offset and size.
+ Each subsys id is mapping to a base address of display function blocks
+ register which is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node. This port connects the MMSYS/VDOSYS output to
+ the first component of one display pipeline, for example one of
+ the available OVL or RDMA blocks.
+ Some MediaTek SoCs support up to three display outputs per MMSYS.
+ properties:
+ endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Output to the primary display pipeline
+
+ endpoint@1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Output to the secondary display pipeline
+
+ endpoint@2:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Output to the tertiary display pipeline
+
+ required:
+ - endpoint@0
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0x14000000 0x1000>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+ <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+ };
@@ -62,6 +62,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: AAL input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ AAL output to the next component's input, for example could be one
+ of many gamma, overdrive or other blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
@@ -89,5 +110,24 @@ examples:
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_AAL>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ aal0_in: endpoint {
+ remote-endpoint = <&ccorr0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ aal0_out: endpoint {
+ remote-endpoint = <&gamma0_in>;
+ };
+ };
+ };
};
};
new file mode 100644
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display adaptive ambient light processor, namely AAL,
+ is responsible for backlight power saving and sunlight visibility improving.
+ AAL device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-aal
+ - mediatek,mt8183-disp-aal
+ - mediatek,mt8195-mdp3-aal
+ - items:
+ - enum:
+ - mediatek,mt2712-disp-aal
+ - mediatek,mt6795-disp-aal
+ - const: mediatek,mt8173-disp-aal
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-aal
+ - mediatek,mt8188-disp-aal
+ - mediatek,mt8192-disp-aal
+ - mediatek,mt8195-disp-aal
+ - mediatek,mt8365-disp-aal
+ - const: mediatek,mt8183-disp-aal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: AAL Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aal@14015000 {
+ compatible = "mediatek,mt8173-disp-aal";
+ reg = <0 0x14015000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_AAL>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+ };
+ };
@@ -57,6 +57,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CCORR input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ CCORR output to the input of the next desired component in the
+ display pipeline, usually only one of the available AAL blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display color correction, namely CCORR, reproduces correct color
+ on panels with different color gamut.
+ CCORR device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8183-disp-ccorr
+ - mediatek,mt8192-disp-ccorr
+ - items:
+ - const: mediatek,mt8365-disp-ccorr
+ - const: mediatek,mt8183-disp-ccorr
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-ccorr
+ - mediatek,mt8188-disp-ccorr
+ - mediatek,mt8195-disp-ccorr
+ - const: mediatek,mt8192-disp-ccorr
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: CCORR Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/gce/mt8183-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ccorr0: ccorr@1400f000 {
+ compatible = "mediatek,mt8183-disp-ccorr";
+ reg = <0 0x1400f000 0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+ };
+ };
@@ -65,6 +65,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: COLOR input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ COLOR output to the input of the next desired component in the
+ display pipeline, for example one of the available CCORR or AAL
+ blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display color processor, namely COLOR, provides hue, luma and
+ saturation adjustments to get better picture quality and to have one panel
+ resemble the other in their output characteristics.
+ COLOR device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-disp-color
+ - mediatek,mt8167-disp-color
+ - mediatek,mt8173-disp-color
+ - mediatek,mt8195-mdp3-color
+ - items:
+ - enum:
+ - mediatek,mt7623-disp-color
+ - mediatek,mt2712-disp-color
+ - const: mediatek,mt2701-disp-color
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-color
+ - mediatek,mt8183-disp-color
+ - mediatek,mt8186-disp-color
+ - mediatek,mt8188-disp-color
+ - mediatek,mt8192-disp-color
+ - mediatek,mt8195-disp-color
+ - mediatek,mt8365-disp-color
+ - const: mediatek,mt8173-disp-color
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: COLOR Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ color0: color@14013000 {
+ compatible = "mediatek,mt8173-disp-color";
+ reg = <0 0x14013000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+ };
+ };
@@ -56,6 +56,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DITHER input, usually from a POSTMASK or GAMMA block.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DITHER output to the input of the next desired component in the
+ display pipeline, for example one of the available DSC compressors,
+ DP_INTF, DSI, LVDS or others.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display dither processor, namely DITHER, works by approximating
+ unavailable colors with available colors and by mixing and matching available
+ colors to mimic unavailable ones.
+ DITHER device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8183-disp-dither
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-dither
+ - mediatek,mt8188-disp-dither
+ - mediatek,mt8192-disp-dither
+ - mediatek,mt8195-disp-dither
+ - mediatek,mt8365-disp-dither
+ - const: mediatek,mt8183-disp-dither
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: DITHER Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/gce/mt8183-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dither0: dither@14012000 {
+ compatible = "mediatek,mt8183-disp-dither";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+ };
+ };
@@ -71,13 +71,34 @@ properties:
Output port node. This port should be connected to the input port of an
attached HDMI, LVDS or DisplayPort encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI output to an HDMI, LVDS or DisplayPort encoder input
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
allOf:
- if:
@@ -100,7 +121,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
- dpi0: dpi@1401d000 {
+ dpi: dpi@1401d000 {
compatible = "mediatek,mt8173-dpi";
reg = <0x1401d000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
new file mode 100644
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DPI and DP_INTF Controller
+
+maintainers:
+ - CK Hu <ck.hu@mediatek.com>
+ - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+ The MediaTek DPI and DP_INTF function blocks are a sink of the display
+ subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+ parallel output bus.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-dpi
+ - mediatek,mt7623-dpi
+ - mediatek,mt8173-dpi
+ - mediatek,mt8183-dpi
+ - mediatek,mt8186-dpi
+ - mediatek,mt8188-dp-intf
+ - mediatek,mt8192-dpi
+ - mediatek,mt8195-dp-intf
+ - items:
+ - enum:
+ - mediatek,mt6795-dpi
+ - const: mediatek,mt8183-dpi
+ - items:
+ - enum:
+ - mediatek,mt8365-dpi
+ - const: mediatek,mt8192-dpi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Pixel Clock
+ - description: Engine Clock
+ - description: DPI PLL
+
+ clock-names:
+ items:
+ - const: pixel
+ - const: engine
+ - const: pll
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: sleep
+
+ power-domains:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node. This port should be connected to the input port of an
+ attached HDMI, LVDS or DisplayPort encoder chip.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - port
+
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt6795-dpi
+ - mediatek,mt8173-dpi
+ - mediatek,mt8186-dpi
+ then:
+ properties:
+ power-domains: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+
+ dpi0: dpi@1401d000 {
+ compatible = "mediatek,mt8173-dpi";
+ reg = <0x1401d000 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+ <&mmsys CLK_MM_DPI_ENGINE>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dpi_pin_func>;
+ pinctrl-1 = <&dpi_pin_idle>;
+
+ port {
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+ };
+
+...
@@ -49,6 +49,30 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression input, usually from one of the DITHER
+ or MERGE blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression output to the input of the next desired
+ component in the display pipeline, for example to MERGE, DP_INTF,
+ DPI or DSI.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
@@ -77,6 +77,26 @@ properties:
Output port node. This port should be connected to the input
port of an attached DSI panel or DSI-to-eDP encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input ports can have multiple endpoints, each of those connects
+ to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI input port, usually from DITHER, DSC or MERGE
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DSI output to an attached DSI panel, or a DSI-to-X encoder chip
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
@@ -86,7 +106,12 @@ required:
- clock-names
- phys
- phy-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
unevaluatedProperties: false
new file mode 100644
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+ - Jitao Shi <jitao.shi@mediatek.com>
+
+description: |
+ The MediaTek DSI function block is a sink of the display subsystem and can
+ drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+ channel output.
+
+allOf:
+ - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-dsi
+ - mediatek,mt7623-dsi
+ - mediatek,mt8167-dsi
+ - mediatek,mt8173-dsi
+ - mediatek,mt8183-dsi
+ - mediatek,mt8186-dsi
+ - mediatek,mt8188-dsi
+ - items:
+ - enum:
+ - mediatek,mt6795-dsi
+ - const: mediatek,mt8173-dsi
+ - items:
+ - enum:
+ - mediatek,mt8195-dsi
+ - mediatek,mt8365-dsi
+ - const: mediatek,mt8183-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Engine Clock
+ - description: Digital Clock
+ - description: HS Clock
+
+ clock-names:
+ items:
+ - const: engine
+ - const: digital
+ - const: hs
+
+ resets:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: dphy
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node. This port should be connected to the input
+ port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/reset/mt8183-resets.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi0: dsi@14014000 {
+ compatible = "mediatek,mt8183-dsi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DSI0_MM>,
+ <&mmsys CLK_MM_DSI0_IF>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ port {
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
+...
@@ -110,6 +110,28 @@ properties:
include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
function block.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: ETHDR input, usually from one of the MERGE blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ ETHDR output to the input of the next desired component in the
+ display pipeline, for example one of the available MERGE blocks,
+ or others.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
@@ -65,6 +65,25 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GAMMA input, usually from one of the AAL blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ GAMMA output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER or
+ POSTMASK blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+ operation used to adjust luminance in display system.
+ GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-gamma
+ - mediatek,mt8183-disp-gamma
+ - mediatek,mt8195-disp-gamma
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-gamma
+ - const: mediatek,mt8173-disp-gamma
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-gamma
+ - mediatek,mt8188-disp-gamma
+ - mediatek,mt8192-disp-gamma
+ - mediatek,mt8195-disp-gamma
+ - mediatek,mt8365-disp-gamma
+ - const: mediatek,mt8183-disp-gamma
+ - items:
+ - enum:
+ - mediatek,mt8188-disp-gamma
+ - const: mediatek,mt8195-disp-gamma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: GAMMA Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gamma@14016000 {
+ compatible = "mediatek,mt8173-disp-gamma";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+ };
+ };
@@ -77,6 +77,29 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA,
+ ETHDR or even from a different MERGE block
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or
+ a different MERGE block, or others.
+
+ required:
+ - port@0
+ - port@1
+
resets:
description: reset controller
See Documentation/devicetree/bindings/reset/reset.txt for details.
new file mode 100644
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+ inputs into one side-by-side output.
+ MERGE device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: mediatek,mt8173-disp-merge
+ - items:
+ - const: mediatek,mt8195-disp-merge
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ maxItems: 2
+ items:
+ - description: MERGE Clock
+ - description: MERGE Async Clock
+ Controlling the synchronous process between MERGE and other display
+ function blocks cross clock domain.
+
+ clock-names:
+ maxItems: 2
+ items:
+ - const: merge
+ - const: merge_async
+
+ mediatek,merge-fifo-en:
+ description:
+ The setting of merge fifo is mainly provided for the display latency
+ buffer to ensure that the back-end panel display data will not be
+ underrun, a little more data is needed in the fifo.
+ According to the merge fifo settings, when the water level is detected
+ to be insufficient, it will trigger RDMA sending ultra and preulra
+ command to SMI to speed up the data rate.
+ type: boolean
+
+ mediatek,merge-mute:
+ description: Support mute function. Mute the content of merge output.
+ type: boolean
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+ resets:
+ description: reset controller
+ See Documentation/devicetree/bindings/reset/reset.txt for details.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+
+ merge@14017000 {
+ compatible = "mediatek,mt8173-disp-merge";
+ reg = <0 0x14017000 0 0x1000>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_MERGE>;
+ };
+
+ merge5: disp_vpp_merge5@1c110000 {
+ compatible = "mediatek,mt8195-disp-merge";
+ reg = <0 0x1c110000 0 0x1000>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+ <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+ clock-names = "merge","merge_async";
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>;
+ mediatek,merge-fifo-en = <1>;
+ resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
+ };
@@ -38,6 +38,28 @@ properties:
items:
- description: OD Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OD input port, usually from an AAL block
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OD output to the input of the next desired component in the
+ display pipeline, for example one of the available RDMA or
+ other blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
@@ -57,6 +57,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS, VDOSYS or other OVLs
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+ for OVL.
+ OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: mediatek,mt8183-disp-ovl-2l
+ - items:
+ - const: mediatek,mt8192-disp-ovl-2l
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: OVL-2L Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+
+ ovl_2l0: ovl@14009000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+ };
@@ -75,6 +75,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS or one of multiple VDOSYS
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display overlay, namely OVL, can do alpha blending from
+ the memory.
+ OVL device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-disp-ovl
+ - mediatek,mt8173-disp-ovl
+ - mediatek,mt8183-disp-ovl
+ - mediatek,mt8192-disp-ovl
+ - mediatek,mt8195-mdp3-ovl
+ - items:
+ - enum:
+ - mediatek,mt7623-disp-ovl
+ - mediatek,mt2712-disp-ovl
+ - const: mediatek,mt2701-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-ovl
+ - const: mediatek,mt8173-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt8188-disp-ovl
+ - mediatek,mt8195-disp-ovl
+ - const: mediatek,mt8183-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-ovl
+ - mediatek,mt8365-disp-ovl
+ - const: mediatek,mt8192-disp-ovl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: OVL Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+ #include <dt-bindings/memory/mt8173-larb-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ovl0: ovl@1400c000 {
+ compatible = "mediatek,mt8173-disp-ovl";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+ };
+ };
@@ -52,6 +52,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: POSTMASK input port, usually from GAMMA
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ POSTMASK output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
@@ -87,6 +87,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: RDMA input port, usually from MMSYS, OD or OVL
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ RDMA output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, DPI,
+ DSI, MERGE or UFOE blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek Read Direct Memory Access(RDMA) component used to read the
+ data into DMA. It provides real time data to the back-end panel
+ driver, such as DSI, DPI and DP_INTF.
+ It contains one line buffer to store the sufficient pixel data.
+ RDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-disp-rdma
+ - mediatek,mt8173-disp-rdma
+ - mediatek,mt8183-disp-rdma
+ - mediatek,mt8195-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt8188-disp-rdma
+ - const: mediatek,mt8195-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt7623-disp-rdma
+ - mediatek,mt2712-disp-rdma
+ - const: mediatek,mt2701-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-rdma
+ - const: mediatek,mt8173-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-rdma
+ - mediatek,mt8192-disp-rdma
+ - mediatek,mt8365-disp-rdma
+ - const: mediatek,mt8183-disp-rdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: RDMA Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,rdma-fifo-size:
+ description:
+ rdma fifo size may be different even in same SOC, add this property to the
+ corresponding rdma.
+ The value below is the Max value which defined in hardware data sheet
+ mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+ mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+ mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8192, 5120, 2048]
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+ #include <dt-bindings/memory/mt8173-larb-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rdma0: rdma@1400e000 {
+ compatible = "mediatek,mt8173-disp-rdma";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,rdma-fifo-size = <8192>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+ };
+ };
@@ -43,6 +43,27 @@ properties:
items:
- description: UFOe Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: UFOE input, usually from one of the RDMA blocks.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ UFOE output to the input of the next desired component in the
+ display pipeline, usually one of the available DSI blocks.
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- reg
new file mode 100644
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek Write Direct Memory Access(WDMA) component used to write
+ the data into DMA.
+ WDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: mediatek,mt8173-disp-wdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: WDMA Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+
+ wdma0: wdma@14011000 {
+ compatible = "mediatek,mt8173-disp-wdma";
+ reg = <0 0x14011000 0 0x1000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+ };
new file mode 100644
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Bifrost GPU
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ $nodename:
+ pattern: '^gpu@[a-f0-9]+$'
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-g12a-mali
+ - mediatek,mt8183-mali
+ - realtek,rtd1619-mali
+ - renesas,r9a07g044-mali
+ - renesas,r9a07g054-mali
+ - rockchip,px30-mali
+ - rockchip,rk3568-mali
+ - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+ - items:
+ - enum:
+ - mediatek,mt8192-mali
+ - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 3
+ items:
+ - description: Job interrupt
+ - description: MMU interrupt
+ - description: GPU interrupt
+ - description: Event interrupt
+
+ interrupt-names:
+ minItems: 3
+ items:
+ - const: job
+ - const: mmu
+ - const: gpu
+ - const: event
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names: true
+
+ mali-supply: true
+
+ sram-supply: true
+
+ operating-points-v2: true
+
+ power-domains:
+ minItems: 1
+ maxItems: 5
+
+ power-domain-names:
+ minItems: 1
+ maxItems: 5
+
+ resets:
+ minItems: 1
+ maxItems: 3
+
+ reset-names: true
+
+ "#cooling-cells":
+ const: 2
+
+ dynamic-power-coefficient:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description:
+ A u32 value that represents the running time dynamic
+ power coefficient in units of uW/MHz/V^2. The
+ coefficient can either be calculated from power
+ measurements or derived by analysis.
+
+ The dynamic power consumption of the GPU is
+ proportional to the square of the Voltage (V) and
+ the clock frequency (f). The coefficient is used to
+ calculate the dynamic power as below -
+
+ Pdyn = dynamic-power-coefficient * V^2 * f
+
+ where voltage is in V, frequency is in MHz.
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,meson-g12a-mali
+ then:
+ properties:
+ power-domains:
+ maxItems: 1
+ power-domain-names: false
+ required:
+ - resets
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a07g044-mali
+ - renesas,r9a07g054-mali
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ interrupt-names:
+ minItems: 4
+ clocks:
+ minItems: 3
+ clock-names:
+ items:
+ - const: gpu
+ - const: bus
+ - const: bus_ace
+ power-domains:
+ maxItems: 1
+ power-domain-names: false
+ resets:
+ minItems: 3
+ reset-names:
+ items:
+ - const: rst
+ - const: axi_rst
+ - const: ace_rst
+ required:
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8183-mali
+ then:
+ properties:
+ power-domains:
+ minItems: 3
+ maxItems: 3
+ power-domain-names:
+ items:
+ - const: core0
+ - const: core1
+ - const: core2
+
+ required:
+ - sram-supply
+ - power-domains
+ - power-domain-names
+ else:
+ properties:
+ sram-supply: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3568-mali
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ items:
+ - const: gpu
+ - const: bus
+ power-domains:
+ maxItems: 1
+ power-domain-names: false
+ required:
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpu@ffe40000 {
+ compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+ reg = <0xffe40000 0x10000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&clk 1>;
+ mali-supply = <&vdd_gpu>;
+ operating-points-v2 = <&gpu_opp_table>;
+ resets = <&reset 0>, <&reset 1>;
+ };
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ opp-microvolt = <1250000>;
+ };
+ opp-450000000 {
+ opp-hz = /bits/ 64 <450000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1125000>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp-266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <925000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <912500>;
+ };
+ };
+
+...
new file mode 100644
@@ -0,0 +1,60 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED
+controllers are defined as the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of Muti-Function Device (MFD)
+using shared bus called PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+
+Required properties:
+- compatible : Must be "mediatek,mt6323-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+Each led is represented as a child node of the mediatek,mt6323-led that
+describes the initial behavior for each LED physically and currently only four
+LED child nodes can be supported.
+
+Required properties for the LED child node:
+- reg : LED channel number (0..3)
+
+Optional properties for the LED child node:
+- label : See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt
+- default-state: See Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ mt6323: pmic {
+ compatible = "mediatek,mt6323";
+
+ ...
+
+ mt6323led: leds {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "LED0";
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+ led@1 {
+ reg = <1>;
+ label = "LED1";
+ default-state = "off";
+ };
+ led@2 {
+ reg = <2>;
+ label = "LED2";
+ default-state = "on";
+ };
+ };
+ };
new file mode 100644
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Universal Flash Storage (UFS) Controller
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+allOf:
+ - $ref: ufs-common.yaml
+
+properties:
+ compatible:
+ oneOf:
+ - const: mediatek,mt8183-ufshci
+ - items:
+ - enum:
+ - mediatek,mt8192-ufshci
+ - mediatek,mt8195-ufshci
+ - const: mediatek,mt8183-ufshci
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ufs
+
+ phys:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ vcc-supply: true
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - phys
+ - reg
+ - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs@ff3c0000 {
+ compatible = "mediatek,mt8183-ufshci";
+ reg = <0 0x11270000 0 0x2300>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&ufsphy>;
+
+ clocks = <&infracfg_ao CLK_INFRA_UFS>;
+ clock-names = "ufs";
+ freq-table-hz = <0 0>;
+
+ vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+ };
+ };