diff mbox

[1/3] ARM64: dts: mt8173: Add clock controller device nodes

Message ID 1432032824-7955-2-git-send-email-s.hauer@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Sascha Hauer May 19, 2015, 10:53 a.m. UTC
This adds the device nodes providing clocks on the Mediatek MT8173.
These are: topckgen, infracfg, pericfg and apmixedsys. These are
fed by two oscillators also added by this patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 41 ++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

Comments

Daniel Kurtz May 20, 2015, 8:44 a.m. UTC | #1
On Tue, May 19, 2015 at 6:53 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> This adds the device nodes providing clocks on the Mediatek MT8173.
> These are: topckgen, infracfg, pericfg and apmixedsys. These are
> fed by two oscillators also added by this patch.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 41 ++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 924fdb6..30ac8dd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -14,6 +14,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include "mt8173-pinfunc.h"
> +#include <dt-bindings/clock/mt8173-clk.h>

nit: alphabetize headers

With that fixed, this one is:
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

>
>  / {
>         compatible = "mediatek,mt8173";
> @@ -87,6 +88,20 @@
>                 #clock-cells = <0>;
>         };
>
> +       clk26m: oscillator@0 {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <26000000>;
> +               clock-output-names = "clk26m";
> +       };
> +
> +       clk32k: oscillator@1 {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <32000>;
> +               clock-output-names = "clk32k";
> +       };
> +
>         timer {
>                 compatible = "arm,armv8-timer";
>                 interrupt-parent = <&gic>;
> @@ -106,6 +121,26 @@
>                 compatible = "simple-bus";
>                 ranges;
>
> +               topckgen: clock-controller@10000000 {
> +                       compatible = "mediatek,mt8173-topckgen";
> +                       reg = <0 0x10000000 0 0x1000>;
> +                       #clock-cells = <1>;
> +               };
> +
> +               infracfg: power-controller@10001000 {
> +                       compatible = "mediatek,mt8173-infracfg", "syscon";
> +                       reg = <0 0x10001000 0 0x1000>;
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +               };
> +
> +               pericfg: power-controller@10003000 {
> +                       compatible = "mediatek,mt8173-pericfg", "syscon";
> +                       reg = <0 0x10003000 0 0x1000>;
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +               };
> +
>                 syscfg_pctl_a: syscfg_pctl_a@10005000 {
>                         compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
>                         reg = <0 0x10005000 0 0x1000>;
> @@ -134,6 +169,12 @@
>                         reg = <0 0x10200620 0 0x20>;
>                 };
>
> +               apmixedsys: clock-controller@10209000 {
> +                       compatible = "mediatek,mt8173-apmixedsys";
> +                       reg = <0 0x10209000 0 0x1000>;
> +                       #clock-cells = <1>;
> +               };
> +
>                 gic: interrupt-controller@10220000 {
>                         compatible = "arm,gic-400";
>                         #interrupt-cells = <3>;
> --
> 2.1.4
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 924fdb6..30ac8dd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "mt8173-pinfunc.h"
+#include <dt-bindings/clock/mt8173-clk.h>
 
 / {
 	compatible = "mediatek,mt8173";
@@ -87,6 +88,20 @@ 
 		#clock-cells = <0>;
 	};
 
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -106,6 +121,26 @@ 
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt8173-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: power-controller@10001000 {
+			compatible = "mediatek,mt8173-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: power-controller@10003000 {
+			compatible = "mediatek,mt8173-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		syscfg_pctl_a: syscfg_pctl_a@10005000 {
 			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
 			reg = <0 0x10005000 0 0x1000>;
@@ -134,6 +169,12 @@ 
 			reg = <0 0x10200620 0 0x20>;
 		};
 
+		apmixedsys: clock-controller@10209000 {
+			compatible = "mediatek,mt8173-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		gic: interrupt-controller@10220000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;