@@ -1,6 +1,15 @@
#
# MediaTek SoC drivers
#
+config MTK_INFRACFG
+ bool "MediaTek INFRACFG Support"
+ depends on ARCH_MEDIATEK
+ select REGMAP
+ help
+ Say yes here to add support for the MediaTek INFRACFG controller. The
+ INFRACFG controller contains various infrastructure registers not
+ directly associated to any device.
+
config MTK_PMIC_WRAP
tristate "MediaTek PMIC Wrapper Support"
depends on ARCH_MEDIATEK
@@ -1 +1,2 @@
+obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
new file mode 100644
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/soc/mediatek/infracfg.h>
+#include <asm/processor.h>
+
+#define INFRA_TOPAXI_PROTECTEN 0x0220
+#define INFRA_TOPAXI_PROTECTSTA1 0x0228
+
+/**
+ * mtk_infracfg_set_bus_protection - enable bus protection
+ * @regmap: The infracfg regmap
+ * @mask: The mask containing the protection bits to be enabled.
+ *
+ * This function enables the bus protection bits for disabled power
+ * domains so that the system does not hanf when some unit accesses the
+ * bus while in power down.
+ */
+int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask)
+{
+ unsigned long expired;
+ u32 val;
+ int ret;
+
+ regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, mask);
+
+ expired = jiffies + HZ;
+
+ while (1) {
+ ret = regmap_read(infracfg, INFRA_TOPAXI_PROTECTSTA1, &val);
+ if (ret)
+ return ret;
+
+ if ((val & mask) == mask)
+ break;
+
+ cpu_relax();
+ if (time_after(jiffies, expired))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mtk_infracfg_clear_bus_protection - disable bus protection
+ * @regmap: The infracfg regmap
+ * @mask: The mask containing the protection bits to be disabled.
+ *
+ * This function disables the bus protection bits previously enabled with
+ * mtk_infracfg_set_bus_protection.
+ */
+int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask)
+{
+ unsigned long expired;
+ int ret;
+
+ regmap_update_bits(infracfg, INFRA_TOPAXI_PROTECTEN, mask, 0);
+
+ expired = jiffies + HZ;
+
+ while (1) {
+ u32 val;
+
+ ret = regmap_read(infracfg, INFRA_TOPAXI_PROTECTSTA1, &val);
+ if (ret)
+ return ret;
+
+ if (!(val & mask))
+ break;
+
+ cpu_relax();
+ if (time_after(jiffies, expired))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,26 @@
+#ifndef __SOC_MEDIATEK_INFRACFG_H
+#define __SOC_MEDIATEK_INFRACFG_H
+
+#define MT8173_TOP_AXI_PROT_EN_MCI_M2 BIT(0)
+#define MT8173_TOP_AXI_PROT_EN_MM_M0 BIT(1)
+#define MT8173_TOP_AXI_PROT_EN_MM_M1 BIT(2)
+#define MT8173_TOP_AXI_PROT_EN_MMAPB_S BIT(6)
+#define MT8173_TOP_AXI_PROT_EN_L2C_M2 BIT(9)
+#define MT8173_TOP_AXI_PROT_EN_L2SS_SMI BIT(11)
+#define MT8173_TOP_AXI_PROT_EN_L2SS_ADD BIT(12)
+#define MT8173_TOP_AXI_PROT_EN_CCI_M2 BIT(13)
+#define MT8173_TOP_AXI_PROT_EN_MFG_S BIT(14)
+#define MT8173_TOP_AXI_PROT_EN_PERI_M0 BIT(15)
+#define MT8173_TOP_AXI_PROT_EN_PERI_M1 BIT(16)
+#define MT8173_TOP_AXI_PROT_EN_DEBUGSYS BIT(17)
+#define MT8173_TOP_AXI_PROT_EN_CQ_DMA BIT(18)
+#define MT8173_TOP_AXI_PROT_EN_GCPU BIT(19)
+#define MT8173_TOP_AXI_PROT_EN_IOMMU BIT(20)
+#define MT8173_TOP_AXI_PROT_EN_MFG_M0 BIT(21)
+#define MT8173_TOP_AXI_PROT_EN_MFG_M1 BIT(22)
+#define MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT BIT(23)
+
+int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask);
+int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask);
+
+#endif /* __SOC_MEDIATEK_INFRACFG_H */
This adds support for some miscellaneous bits of the infracfg controller. The mtk_infracfg_set/clear_bus_protection functions are necessary for the scpsys power domain driver to handle the bus protection bits which are contained in the infacfg register space. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/soc/mediatek/Kconfig | 9 ++++ drivers/soc/mediatek/Makefile | 1 + drivers/soc/mediatek/mtk-infracfg.c | 94 +++++++++++++++++++++++++++++++++++ include/linux/soc/mediatek/infracfg.h | 26 ++++++++++ 4 files changed, 130 insertions(+) create mode 100644 drivers/soc/mediatek/mtk-infracfg.c create mode 100644 include/linux/soc/mediatek/infracfg.h