| Message ID | 1436783694-30717-2-git-send-email-s.hauer@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jul 13, 2015 at 6:34 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote: > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > .../bindings/thermal/mediatek-thermal.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > > diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > new file mode 100644 > index 0000000..d90e4dc > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > @@ -0,0 +1,38 @@ > +* Mediatek Thermal > + > +This describes the device tree binding for the Mediatek thermal controller > +which measures the on-SoC temperatures. This device does not have its own ADC, > +instead it directly controls the AUXADC via AHB bus accesses. For this reason > +this device needs phandles to the AUXADC. Also it controls a mux in the > +apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS > +is also needed. > + > +Required properties: > +- compatible: "mediatek,mt8173-thermal" > +- reg: Address range of the thermal controller > +- interrupts: IRQ for the thermal controller > +- clocks, clock-names: Clocks needed for the thermal controller. required > + clocks are: > + "therm": Main clock needed for register access > + "auxadc": The AUXADC clock > +- resets, reset-names: Reference to the reset controller controlling the thermal > + controller. Required reset-names: > + "therm": The main reset line > +- auxadc: A phandle to the AUXADC which the thermal controller uses > +- apmixedsys: A phandle to the APMIXEDSYS controller. Hmm, shouldn't these custom properties be prefixed with: "mediatek,..." -Dan > +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description > + > +Example: > + > + thermal: thermal@1100b000 { > + #thermal-sensor-cells = <1>; > + compatible = "mediatek,mt8173-thermal"; > + reg = <0 0x1100b000 0 0x1000>; > + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; > + clock-names = "therm", "auxadc"; > + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; > + reset-names = "therm"; > + auxadc = <&auxadc>; > + apmixedsys = <&apmixedsys>; > + }; > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt new file mode 100644 index 0000000..d90e4dc --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt @@ -0,0 +1,38 @@ +* Mediatek Thermal + +This describes the device tree binding for the Mediatek thermal controller +which measures the on-SoC temperatures. This device does not have its own ADC, +instead it directly controls the AUXADC via AHB bus accesses. For this reason +this device needs phandles to the AUXADC. Also it controls a mux in the +apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS +is also needed. + +Required properties: +- compatible: "mediatek,mt8173-thermal" +- reg: Address range of the thermal controller +- interrupts: IRQ for the thermal controller +- clocks, clock-names: Clocks needed for the thermal controller. required + clocks are: + "therm": Main clock needed for register access + "auxadc": The AUXADC clock +- resets, reset-names: Reference to the reset controller controlling the thermal + controller. Required reset-names: + "therm": The main reset line +- auxadc: A phandle to the AUXADC which the thermal controller uses +- apmixedsys: A phandle to the APMIXEDSYS controller. +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description + +Example: + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8173-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; + reset-names = "therm"; + auxadc = <&auxadc>; + apmixedsys = <&apmixedsys>; + };
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- .../bindings/thermal/mediatek-thermal.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt