diff mbox

[v7,1/3] dt-bindings: pwm: add MediaTek display PWM bindings

Message ID 1439882875-19596-2-git-send-email-yh.huang@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

YH Huang Aug. 18, 2015, 7:27 a.m. UTC 
Document the device-tree binding of MediaTek display PWM.
The PWM has one channel to control the backlight brightness for display.
It supports MT8173 and MT6595.

Signed-off-by: YH Huang <yh.huang@mediatek.com>
---
 .../devicetree/bindings/pwm/pwm-mtk-disp.txt       |   42 ++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt

Comments

Thierry Reding Oct. 5, 2015, 3:58 p.m. UTC | #1 
On Tue, Aug 18, 2015 at 03:27:53PM +0800, YH Huang wrote:
> Document the device-tree binding of MediaTek display PWM.
> The PWM has one channel to control the backlight brightness for display.
> It supports MT8173 and MT6595.
> 
> Signed-off-by: YH Huang <yh.huang@mediatek.com>
> ---
>  .../devicetree/bindings/pwm/pwm-mtk-disp.txt       |   42 ++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt

Applied, thanks.

Thierry
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
new file mode 100644
index 0000000..f8f59ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
@@ -0,0 +1,42 @@ 
+MediaTek display PWM controller
+
+Required properties:
+ - compatible: should be "mediatek,<name>-disp-pwm":
+   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
+   - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+ - reg: physical base address and length of the controller's registers.
+ - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
+   the cell format.
+ - clocks: phandle and clock specifier of the PWM reference clock.
+ - clock-names: must contain the following:
+   - "main": clock used to generate PWM signals.
+   - "mm": sync signals from the modules of mmsys.
+ - pinctrl-names: Must contain a "default" entry.
+ - pinctrl-0: One property must exist for each entry in pinctrl-names.
+   See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+Example:
+	pwm0: pwm@1401e000 {
+		compatible = "mediatek,mt8173-disp-pwm",
+			     "mediatek,mt6595-disp-pwm";
+		reg = <0 0x1401e000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+			 <&mmsys CLK_MM_DISP_PWM0MM>;
+		clock-names = "main", "mm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&disp_pwm0_pins>;
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000>;
+		brightness-levels = <
+			  0  16  32  48  64  80  96 112
+			128 144 160 176 192 208 224 240
+			255
+		>;
+		default-brightness-level = <9>;
+		power-supply = <&mt6397_vio18_reg>;
+		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
+	};