@@ -60,7 +60,6 @@ config QCOM_QFPROM
tristate "QCOM QFPROM Support"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
- select REGMAP_MMIO
help
Say y here to enable QFPROM support. The QFPROM provides access
functions for QFPROM data to rest of the drivers via nvmem interface.
@@ -13,21 +13,35 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/io.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
-#include <linux/regmap.h>
-static struct regmap_config qfprom_regmap_config = {
- .reg_bits = 32,
- .val_bits = 8,
- .reg_stride = 1,
- .val_format_endian = REGMAP_ENDIAN_LITTLE,
-};
+static int qfprom_reg_read(void *context,
+ unsigned int reg, void *_val, size_t bytes)
+{
+ void __iomem *base = context;
+ u32 *val = _val;
+ int i = 0, words = bytes / 4;
-static struct nvmem_config econfig = {
- .name = "qfprom",
- .owner = THIS_MODULE,
-};
+ while (words--)
+ *val++ = readl(base + reg + (i++ * 4));
+
+ return 0;
+}
+
+static int qfprom_reg_write(void *context,
+ unsigned int reg, void *_val, size_t bytes)
+{
+ void __iomem *base = context;
+ u32 *val = _val;
+ int i = 0, words = bytes / 4;
+
+ while (words--)
+ writel(*val++, base + reg + (i++ * 4));
+
+ return 0;
+}
static int qfprom_remove(struct platform_device *pdev)
{
@@ -36,12 +50,20 @@ static int qfprom_remove(struct platform_device *pdev)
return nvmem_unregister(nvmem);
}
+static struct nvmem_config econfig = {
+ .name = "qfprom",
+ .owner = THIS_MODULE,
+ .stride = 4,
+ .word_size = 1,
+ .reg_read = qfprom_reg_read,
+ .reg_write = qfprom_reg_write,
+};
+
static int qfprom_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct nvmem_device *nvmem;
- struct regmap *regmap;
void __iomem *base;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -49,14 +71,10 @@ static int qfprom_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
- qfprom_regmap_config.max_register = resource_size(res) - 1;
-
- regmap = devm_regmap_init_mmio(dev, base, &qfprom_regmap_config);
- if (IS_ERR(regmap)) {
- dev_err(dev, "regmap init failed\n");
- return PTR_ERR(regmap);
- }
+ econfig.size = resource_size(res);
econfig.dev = dev;
+ econfig.priv = base;
+
nvmem = nvmem_register(&econfig);
if (IS_ERR(nvmem))
return PTR_ERR(nvmem);
This patch moves to nvmem support in the driver to use callback instead of regmap. Reported-by: Rajendra Nayak <rjendra@qti.qualcomm.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/nvmem/Kconfig | 1 - drivers/nvmem/qfprom.c | 56 +++++++++++++++++++++++++++++++++----------------- 2 files changed, 37 insertions(+), 20 deletions(-)