Message ID | 1468987385-37353-4-git-send-email-bibby.hsieh@mediatek.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi, Bibby: Some comments inline. On Wed, 2016-07-20 at 12:03 +0800, Bibby Hsieh wrote: > From: Junzhi Zhao <junzhi.zhao@mediatek.com> > > Pixel clock should be 297MHz when resolution is 4K. > > Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++----------- > 1 file changed, 131 insertions(+), 53 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index d05ca79..c0f04d2 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format { > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL > }; > > +enum mtk_dpi_clk_id { > + MTK_DPI_CLK_DPI_ENGINE, > + MTK_DPI_CLK_DPI_PIXEL, > + MTK_DPI_CLK_TVD_PLL, > + MTK_DPI_CLK_TVDPLL_MUX, > + MTK_DPI_CLK_TVDPLL_D2, > + MTK_DPI_CLK_TVDPLL_D4, > + MTK_DPI_CLK_TVDPLL_D8, > + MTK_DPI_CLK_TVDPLL_D16, > + MTK_DPI_CLK_COUNT, > +}; > + > +static const char * const mtk_dpi_clk_names[MTK_DPI_CLK_COUNT] = { > + [MTK_DPI_CLK_DPI_ENGINE] = "engine", > + [MTK_DPI_CLK_DPI_PIXEL] = "pixel", > + [MTK_DPI_CLK_TVD_PLL] = "pll", > + [MTK_DPI_CLK_TVDPLL_MUX] = "tvdpll_mux", > + [MTK_DPI_CLK_TVDPLL_D2] = "tvdpll_d2", > + [MTK_DPI_CLK_TVDPLL_D4] = "tvdpll_d4", > + [MTK_DPI_CLK_TVDPLL_D8] = "tvdpll_d8", > + [MTK_DPI_CLK_TVDPLL_D16] = "tvdpll_d16", > +}; > + > struct mtk_dpi { > struct mtk_ddp_comp ddp_comp; > struct drm_encoder encoder; > void __iomem *regs; > struct device *dev; > - struct clk *engine_clk; > - struct clk *pixel_clk; > - struct clk *tvd_clk; > + struct clk *clk[MTK_DPI_CLK_COUNT]; > int irq; > struct drm_display_mode mode; > enum mtk_dpi_out_color_format color_format; > @@ -76,6 +97,7 @@ struct mtk_dpi { > enum mtk_dpi_out_channel_swap channel_swap; > bool power_sta; > u8 power_ctl; > + void *data; > }; > > static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e) > @@ -114,6 +136,11 @@ struct mtk_dpi_yc_limit { > u16 c_bottom; > }; > > +struct mtk_dpi_conf { > + int (*parse_clk_from_dt)(struct mtk_dpi *dpi, struct device_node *np); > + int (*clk_config)(struct mtk_dpi *dpi, struct drm_display_mode *mode); > +}; > + > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > { > u32 tmp = readl(dpi->regs + offset) & ~mask; > @@ -377,8 +404,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) > return; > > mtk_dpi_disable(dpi); > - clk_disable_unprepare(dpi->pixel_clk); > - clk_disable_unprepare(dpi->engine_clk); > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); > dpi->power_sta = false; > } > > @@ -395,13 +422,13 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) > if (dpi->power_sta) > return 0; > > - ret = clk_prepare_enable(dpi->engine_clk); > + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); > if (ret) { > dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret); > goto err_eng; > } > > - ret = clk_prepare_enable(dpi->pixel_clk); > + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); > if (ret) { > dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret); > goto err_pixel; > @@ -412,7 +439,7 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) > return 0; > > err_pixel: > - clk_disable_unprepare(dpi->engine_clk); > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); > err_eng: > dpi->power_ctl &= ~pctl; > return ret; > @@ -428,34 +455,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > struct mtk_dpi_sync_param vsync_leven = { 0 }; > struct mtk_dpi_sync_param vsync_rodd = { 0 }; > struct mtk_dpi_sync_param vsync_reven = { 0 }; > - unsigned long pix_rate; > - unsigned long pll_rate; > - unsigned int factor; > + struct mtk_dpi_conf *conf; > + int ret; > > if (!dpi) { > dev_err(dpi->dev, "invalid argument\n"); > return -EINVAL; > } > > - pix_rate = 1000UL * mode->clock; > - if (mode->clock <= 74000) > - factor = 8 * 3; > - else > - factor = 4 * 3; > - pll_rate = pix_rate * factor; > - > - dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", > - pll_rate, pix_rate); > - > - clk_set_rate(dpi->tvd_clk, pll_rate); > - pll_rate = clk_get_rate(dpi->tvd_clk); > - > - pix_rate = pll_rate / factor; > - clk_set_rate(dpi->pixel_clk, pix_rate); > - pix_rate = clk_get_rate(dpi->pixel_clk); > - > - dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", > - pll_rate, pix_rate); > + conf = (struct mtk_dpi_conf *)dpi->data; > + ret = conf->clk_config(dpi, mode); Nothing to do with return error? > > limit.c_bottom = 0x0010; > limit.c_top = 0x0FE0; > @@ -656,20 +665,109 @@ static const struct component_ops mtk_dpi_component_ops = { > .unbind = mtk_dpi_unbind, > }; > > +static int mt8173_parse_clk_from_dt(struct mtk_dpi *dpi, struct device_node *np) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(mtk_dpi_clk_names); i++) { > + dpi->clk[i] = of_clk_get_by_name(np, > + mtk_dpi_clk_names[i]); > + if (IS_ERR(dpi->clk[i])) > + return PTR_ERR(dpi->clk[i]); > + } > + return 0; > +} I think parsing device tree is a pure SW behavior. Would this vary for different MTK soc? > + > +static int mt8173_clk_config(struct mtk_dpi *dpi, struct drm_display_mode *mode) > +{ > + unsigned long pix_rate; > + unsigned long pll_rate; > + unsigned int factor; > + struct clk *parent; > + int ret; > + > + if (mode->clock <= 27000) { > + factor = 16 * 3; > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D16]; > + } else if (mode->clock <= 74250) { > + factor = 8 * 3; > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D8]; > + } else if (mode->clock <= 167000) { > + factor = 4 * 3; > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D4]; > + } else { > + factor = 2 * 3; > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D2]; > + } > + > + pix_rate = 1000UL * mode->clock; > + pll_rate = pix_rate * factor; > + > + dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", > + pll_rate, pix_rate); > + > + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]); > + if (ret) { > + dev_err(dpi->dev, "tvdpll_mux enable fail\n"); > + return ret; > + } > + > + ret = clk_set_parent(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX], parent); > + if (ret) { > + dev_err(dpi->dev, "tvdpll_mux set parent fail\n"); Before return, you may undo something. > + return ret; > + } > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]); > + > + ret = clk_set_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL], pll_rate); > + if (ret) { > + dev_err(dpi->dev, "dpi pll_rate set rate fail\n"); > + return ret; > + } > + pll_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL]); > + pix_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); > + > + dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", > + pll_rate, pix_rate); > + > + return 0; > +} > + > +static const struct mtk_dpi_conf mt8173_conf = { > + .parse_clk_from_dt = mt8173_parse_clk_from_dt, > + .clk_config = mt8173_clk_config, > +}; > + > +static const struct of_device_id mtk_dpi_of_ids[] = { > + { .compatible = "mediatek,mt8173-dpi", > + .data = &mt8173_conf, > + }, > + {} > +}; > + > static int mtk_dpi_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct mtk_dpi *dpi; > struct resource *mem; > + struct device_node *np = dev->of_node; > struct device_node *ep, *bridge_node = NULL; > int comp_id; > + const struct of_device_id *match; > + struct mtk_dpi_conf *conf; > int ret; > > + match = of_match_node(mtk_dpi_of_ids, dev->of_node); > + if (!match) > + return -ENODEV; > + > dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL); > if (!dpi) > return -ENOMEM; > > dpi->dev = dev; > + dpi->data = (void *)match->data; > + conf = (struct mtk_dpi_conf *)match->data; > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > dpi->regs = devm_ioremap_resource(dev, mem); > @@ -679,24 +777,9 @@ static int mtk_dpi_probe(struct platform_device *pdev) > return ret; > } > > - dpi->engine_clk = devm_clk_get(dev, "engine"); > - if (IS_ERR(dpi->engine_clk)) { > - ret = PTR_ERR(dpi->engine_clk); > - dev_err(dev, "Failed to get engine clock: %d\n", ret); > - return ret; > - } > - > - dpi->pixel_clk = devm_clk_get(dev, "pixel"); > - if (IS_ERR(dpi->pixel_clk)) { > - ret = PTR_ERR(dpi->pixel_clk); > - dev_err(dev, "Failed to get pixel clock: %d\n", ret); > - return ret; > - } > - > - dpi->tvd_clk = devm_clk_get(dev, "pll"); > - if (IS_ERR(dpi->tvd_clk)) { > - ret = PTR_ERR(dpi->tvd_clk); > - dev_err(dev, "Failed to get tvdpll clock: %d\n", ret); > + ret = conf->parse_clk_from_dt(dpi, np); > + if (ret) { > + dev_err(dev, "parse tvd div clk failed!"); > return ret; > } > > @@ -754,11 +837,6 @@ static int mtk_dpi_remove(struct platform_device *pdev) > return 0; > } > > -static const struct of_device_id mtk_dpi_of_ids[] = { > - { .compatible = "mediatek,mt8173-dpi", }, > - {} > -}; > - > struct platform_driver mtk_dpi_driver = { > .probe = mtk_dpi_probe, > .remove = mtk_dpi_remove, Regards, CK
Am Mittwoch, den 20.07.2016, 12:03 +0800 schrieb Bibby Hsieh: > From: Junzhi Zhao <junzhi.zhao@mediatek.com> > > Pixel clock should be 297MHz when resolution is 4K. > > Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++----------- > 1 file changed, 131 insertions(+), 53 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > index d05ca79..c0f04d2 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > @@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format { > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL > }; > > +enum mtk_dpi_clk_id { > + MTK_DPI_CLK_DPI_ENGINE, > + MTK_DPI_CLK_DPI_PIXEL, > + MTK_DPI_CLK_TVD_PLL, > + MTK_DPI_CLK_TVDPLL_MUX, > + MTK_DPI_CLK_TVDPLL_D2, > + MTK_DPI_CLK_TVDPLL_D4, > + MTK_DPI_CLK_TVDPLL_D8, > + MTK_DPI_CLK_TVDPLL_D16, > + MTK_DPI_CLK_COUNT, > +}; I think this is going in the wrong direction. If the pixel clock output isn't correct after a clk_set_rate(dpi->pixel_clk, rate), the clock drivers should be fixed, not worked around in the dpi driver. The TVDPLL_* mux and dividers are not direct inputs to the DPI module: tvdpll ("pll") | ..|\ v ..| | mm_sel ----> mm_dpi_engine ("engine") tvdpll_594m(1/3) ..|/ | |`-> tvdpll_d2 -->|\ |`-> tvdpll_d4 -->| | dpi0_sel --> mm_dpi_pixel ("pixel") |`-> tvdpll_d8 -->| | `--> tvdpll_d16 ->|/ Currently the code first sets the "pll" to the desired multiple of the pixel clock manually (*3*4, *3*8) and than calls clk_set_rate on the "pixel" clock which gets propagated by the clock framework up to dpi0_sel. Since dpi0_sel doesn't have the CLK_SET_RATE_PARENT flag set, it should just choose the tvdpll_d* input divider. I'd like not to give the dpi driver direct access to all the intermediate clocks. regards Philipp
Hi, CK, Thanks for your comments. On Wed, 2016-07-20 at 15:57 +0800, CK Hu wrote: > Hi, Bibby: > > Some comments inline. > > On Wed, 2016-07-20 at 12:03 +0800, Bibby Hsieh wrote: > > From: Junzhi Zhao <junzhi.zhao@mediatek.com> > > > > Pixel clock should be 297MHz when resolution is 4K. > > > > Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com> > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++----------- > > 1 file changed, 131 insertions(+), 53 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index d05ca79..c0f04d2 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format { > > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL > > }; > > > > +enum mtk_dpi_clk_id { > > + MTK_DPI_CLK_DPI_ENGINE, > > + MTK_DPI_CLK_DPI_PIXEL, > > + MTK_DPI_CLK_TVD_PLL, > > + MTK_DPI_CLK_TVDPLL_MUX, > > + MTK_DPI_CLK_TVDPLL_D2, > > + MTK_DPI_CLK_TVDPLL_D4, > > + MTK_DPI_CLK_TVDPLL_D8, > > + MTK_DPI_CLK_TVDPLL_D16, > > + MTK_DPI_CLK_COUNT, > > +}; > > + > > +static const char * const mtk_dpi_clk_names[MTK_DPI_CLK_COUNT] = { > > + [MTK_DPI_CLK_DPI_ENGINE] = "engine", > > + [MTK_DPI_CLK_DPI_PIXEL] = "pixel", > > + [MTK_DPI_CLK_TVD_PLL] = "pll", > > + [MTK_DPI_CLK_TVDPLL_MUX] = "tvdpll_mux", > > + [MTK_DPI_CLK_TVDPLL_D2] = "tvdpll_d2", > > + [MTK_DPI_CLK_TVDPLL_D4] = "tvdpll_d4", > > + [MTK_DPI_CLK_TVDPLL_D8] = "tvdpll_d8", > > + [MTK_DPI_CLK_TVDPLL_D16] = "tvdpll_d16", > > +}; > > + > > struct mtk_dpi { > > struct mtk_ddp_comp ddp_comp; > > struct drm_encoder encoder; > > void __iomem *regs; > > struct device *dev; > > - struct clk *engine_clk; > > - struct clk *pixel_clk; > > - struct clk *tvd_clk; > > + struct clk *clk[MTK_DPI_CLK_COUNT]; > > int irq; > > struct drm_display_mode mode; > > enum mtk_dpi_out_color_format color_format; > > @@ -76,6 +97,7 @@ struct mtk_dpi { > > enum mtk_dpi_out_channel_swap channel_swap; > > bool power_sta; > > u8 power_ctl; > > + void *data; > > }; > > > > static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e) > > @@ -114,6 +136,11 @@ struct mtk_dpi_yc_limit { > > u16 c_bottom; > > }; > > > > +struct mtk_dpi_conf { > > + int (*parse_clk_from_dt)(struct mtk_dpi *dpi, struct device_node *np); > > + int (*clk_config)(struct mtk_dpi *dpi, struct drm_display_mode *mode); > > +}; > > + > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) > > { > > u32 tmp = readl(dpi->regs + offset) & ~mask; > > @@ -377,8 +404,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) > > return; > > > > mtk_dpi_disable(dpi); > > - clk_disable_unprepare(dpi->pixel_clk); > > - clk_disable_unprepare(dpi->engine_clk); > > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); > > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); > > dpi->power_sta = false; > > } > > > > @@ -395,13 +422,13 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) > > if (dpi->power_sta) > > return 0; > > > > - ret = clk_prepare_enable(dpi->engine_clk); > > + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); > > if (ret) { > > dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret); > > goto err_eng; > > } > > > > - ret = clk_prepare_enable(dpi->pixel_clk); > > + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); > > if (ret) { > > dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret); > > goto err_pixel; > > @@ -412,7 +439,7 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) > > return 0; > > > > err_pixel: > > - clk_disable_unprepare(dpi->engine_clk); > > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); > > err_eng: > > dpi->power_ctl &= ~pctl; > > return ret; > > @@ -428,34 +455,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, > > struct mtk_dpi_sync_param vsync_leven = { 0 }; > > struct mtk_dpi_sync_param vsync_rodd = { 0 }; > > struct mtk_dpi_sync_param vsync_reven = { 0 }; > > - unsigned long pix_rate; > > - unsigned long pll_rate; > > - unsigned int factor; > > + struct mtk_dpi_conf *conf; > > + int ret; > > > > if (!dpi) { > > dev_err(dpi->dev, "invalid argument\n"); > > return -EINVAL; > > } > > > > - pix_rate = 1000UL * mode->clock; > > - if (mode->clock <= 74000) > > - factor = 8 * 3; > > - else > > - factor = 4 * 3; > > - pll_rate = pix_rate * factor; > > - > > - dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", > > - pll_rate, pix_rate); > > - > > - clk_set_rate(dpi->tvd_clk, pll_rate); > > - pll_rate = clk_get_rate(dpi->tvd_clk); > > - > > - pix_rate = pll_rate / factor; > > - clk_set_rate(dpi->pixel_clk, pix_rate); > > - pix_rate = clk_get_rate(dpi->pixel_clk); > > - > > - dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", > > - pll_rate, pix_rate); > > + conf = (struct mtk_dpi_conf *)dpi->data; > > + ret = conf->clk_config(dpi, mode); > > Nothing to do with return error? > Ok, I will fix that. > > > > limit.c_bottom = 0x0010; > > limit.c_top = 0x0FE0; > > @@ -656,20 +665,109 @@ static const struct component_ops mtk_dpi_component_ops = { > > .unbind = mtk_dpi_unbind, > > }; > > > > +static int mt8173_parse_clk_from_dt(struct mtk_dpi *dpi, struct device_node *np) > > +{ > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(mtk_dpi_clk_names); i++) { > > + dpi->clk[i] = of_clk_get_by_name(np, > > + mtk_dpi_clk_names[i]); > > + if (IS_ERR(dpi->clk[i])) > > + return PTR_ERR(dpi->clk[i]); > > + } > > + return 0; > > +} > > I think parsing device tree is a pure SW behavior. Would this vary for > different MTK soc? > Yes > > + > > +static int mt8173_clk_config(struct mtk_dpi *dpi, struct drm_display_mode *mode) > > +{ > > + unsigned long pix_rate; > > + unsigned long pll_rate; > > + unsigned int factor; > > + struct clk *parent; > > + int ret; > > + > > + if (mode->clock <= 27000) { > > + factor = 16 * 3; > > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D16]; > > + } else if (mode->clock <= 74250) { > > + factor = 8 * 3; > > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D8]; > > + } else if (mode->clock <= 167000) { > > + factor = 4 * 3; > > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D4]; > > + } else { > > + factor = 2 * 3; > > + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D2]; > > + } > > + > > + pix_rate = 1000UL * mode->clock; > > + pll_rate = pix_rate * factor; > > + > > + dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", > > + pll_rate, pix_rate); > > + > > + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]); > > + if (ret) { > > + dev_err(dpi->dev, "tvdpll_mux enable fail\n"); > > + return ret; > > + } > > + > > + ret = clk_set_parent(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX], parent); > > + if (ret) { > > + dev_err(dpi->dev, "tvdpll_mux set parent fail\n"); > > Before return, you may undo something. I think we can remove this function at the new version, because we make some changes here according Philipp' comments. > > > + return ret; > > + } > > + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]); > > + > > + ret = clk_set_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL], pll_rate); > > + if (ret) { > > + dev_err(dpi->dev, "dpi pll_rate set rate fail\n"); > > + return ret; > > + } > > + pll_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL]); > > + pix_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); > > + > > + dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", > > + pll_rate, pix_rate); > > + > > + return 0; > > +} > > + > > +static const struct mtk_dpi_conf mt8173_conf = { > > + .parse_clk_from_dt = mt8173_parse_clk_from_dt, > > + .clk_config = mt8173_clk_config, > > +}; > > + > > +static const struct of_device_id mtk_dpi_of_ids[] = { > > + { .compatible = "mediatek,mt8173-dpi", > > + .data = &mt8173_conf, > > + }, > > + {} > > +}; > > + > > static int mtk_dpi_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > struct mtk_dpi *dpi; > > struct resource *mem; > > + struct device_node *np = dev->of_node; > > struct device_node *ep, *bridge_node = NULL; > > int comp_id; > > + const struct of_device_id *match; > > + struct mtk_dpi_conf *conf; > > int ret; > > > > + match = of_match_node(mtk_dpi_of_ids, dev->of_node); > > + if (!match) > > + return -ENODEV; > > + > > dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL); > > if (!dpi) > > return -ENOMEM; > > > > dpi->dev = dev; > > + dpi->data = (void *)match->data; > > + conf = (struct mtk_dpi_conf *)match->data; > > > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > dpi->regs = devm_ioremap_resource(dev, mem); > > @@ -679,24 +777,9 @@ static int mtk_dpi_probe(struct platform_device *pdev) > > return ret; > > } > > > > - dpi->engine_clk = devm_clk_get(dev, "engine"); > > - if (IS_ERR(dpi->engine_clk)) { > > - ret = PTR_ERR(dpi->engine_clk); > > - dev_err(dev, "Failed to get engine clock: %d\n", ret); > > - return ret; > > - } > > - > > - dpi->pixel_clk = devm_clk_get(dev, "pixel"); > > - if (IS_ERR(dpi->pixel_clk)) { > > - ret = PTR_ERR(dpi->pixel_clk); > > - dev_err(dev, "Failed to get pixel clock: %d\n", ret); > > - return ret; > > - } > > - > > - dpi->tvd_clk = devm_clk_get(dev, "pll"); > > - if (IS_ERR(dpi->tvd_clk)) { > > - ret = PTR_ERR(dpi->tvd_clk); > > - dev_err(dev, "Failed to get tvdpll clock: %d\n", ret); > > + ret = conf->parse_clk_from_dt(dpi, np); > > + if (ret) { > > + dev_err(dev, "parse tvd div clk failed!"); > > return ret; > > } > > > > @@ -754,11 +837,6 @@ static int mtk_dpi_remove(struct platform_device *pdev) > > return 0; > > } > > > > -static const struct of_device_id mtk_dpi_of_ids[] = { > > - { .compatible = "mediatek,mt8173-dpi", }, > > - {} > > -}; > > - > > struct platform_driver mtk_dpi_driver = { > > .probe = mtk_dpi_probe, > > .remove = mtk_dpi_remove, > > Regards, > CK >
Hi, Philipp, Thanks for your comment. On Wed, 2016-07-20 at 11:41 +0200, Philipp Zabel wrote: > Am Mittwoch, den 20.07.2016, 12:03 +0800 schrieb Bibby Hsieh: > > From: Junzhi Zhao <junzhi.zhao@mediatek.com> > > > > Pixel clock should be 297MHz when resolution is 4K. > > > > Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com> > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++----------- > > 1 file changed, 131 insertions(+), 53 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index d05ca79..c0f04d2 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format { > > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL > > }; > > > > +enum mtk_dpi_clk_id { > > + MTK_DPI_CLK_DPI_ENGINE, > > + MTK_DPI_CLK_DPI_PIXEL, > > + MTK_DPI_CLK_TVD_PLL, > > + MTK_DPI_CLK_TVDPLL_MUX, > > + MTK_DPI_CLK_TVDPLL_D2, > > + MTK_DPI_CLK_TVDPLL_D4, > > + MTK_DPI_CLK_TVDPLL_D8, > > + MTK_DPI_CLK_TVDPLL_D16, > > + MTK_DPI_CLK_COUNT, > > +}; > > I think this is going in the wrong direction. If the pixel clock output > isn't correct after a clk_set_rate(dpi->pixel_clk, rate), the clock > drivers should be fixed, not worked around in the dpi driver. > > The TVDPLL_* mux and dividers are not direct inputs to the DPI module: > > tvdpll ("pll") > | ..|\ > v ..| | mm_sel ----> mm_dpi_engine ("engine") > tvdpll_594m(1/3) ..|/ > | > |`-> tvdpll_d2 -->|\ > |`-> tvdpll_d4 -->| | dpi0_sel --> mm_dpi_pixel ("pixel") > |`-> tvdpll_d8 -->| | > `--> tvdpll_d16 ->|/ > > Currently the code first sets the "pll" to the desired multiple of the > pixel clock manually (*3*4, *3*8) and than calls clk_set_rate on the > "pixel" clock which gets propagated by the clock framework up to > dpi0_sel. Since dpi0_sel doesn't have the CLK_SET_RATE_PARENT flag set, > it should just choose the tvdpll_d* input divider. I'd like not to give > the dpi driver direct access to all the intermediate clocks. > Ok, I will make some modifications according to your comment. > regards > Philipp
Hi, Bibby: On Mon, 2016-07-25 at 14:24 +0800, Bibby Hsieh wrote: > Hi, CK, > > Thanks for your comments. > > On Wed, 2016-07-20 at 15:57 +0800, CK Hu wrote: > > Hi, Bibby: > > > > Some comments inline. > > > > On Wed, 2016-07-20 at 12:03 +0800, Bibby Hsieh wrote: > > > From: Junzhi Zhao <junzhi.zhao@mediatek.com> > > > > > > Pixel clock should be 297MHz when resolution is 4K. > > > > > > Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com> > > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > > > --- > > > drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++----------- > > > 1 file changed, 131 insertions(+), 53 deletions(-) > > > [snip...] > > > > > > +static int mt8173_parse_clk_from_dt(struct mtk_dpi *dpi, struct device_node *np) > > > +{ > > > + int i; > > > + > > > + for (i = 0; i < ARRAY_SIZE(mtk_dpi_clk_names); i++) { > > > + dpi->clk[i] = of_clk_get_by_name(np, > > > + mtk_dpi_clk_names[i]); > > > + if (IS_ERR(dpi->clk[i])) > > > + return PTR_ERR(dpi->clk[i]); > > > + } > > > + return 0; > > > +} > > > > I think parsing device tree is a pure SW behavior. Would this vary for > > different MTK soc? > > > Yes I can not imaging that, so could you give me an example source code of other MTK soc for parse_clk_from_dt()? > > > + > > > + > > > +static const struct mtk_dpi_conf mt8173_conf = { > > > + .parse_clk_from_dt = mt8173_parse_clk_from_dt, > > > + .clk_config = mt8173_clk_config, > > > +}; > > > + > > > +static const struct of_device_id mtk_dpi_of_ids[] = { > > > + { .compatible = "mediatek,mt8173-dpi", > > > + .data = &mt8173_conf, > > > + }, > > > + {} > > > +}; > > > + > > > static int mtk_dpi_probe(struct platform_device *pdev) > > > { > > > struct device *dev = &pdev->dev; > > > struct mtk_dpi *dpi; > > > struct resource *mem; > > > + struct device_node *np = dev->of_node; > > > struct device_node *ep, *bridge_node = NULL; > > > int comp_id; > > > + const struct of_device_id *match; > > > + struct mtk_dpi_conf *conf; > > > int ret; > > > > > > + match = of_match_node(mtk_dpi_of_ids, dev->of_node); > > > + if (!match) > > > + return -ENODEV; > > > + > > > dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL); > > > if (!dpi) > > > return -ENOMEM; > > > > > > dpi->dev = dev; > > > + dpi->data = (void *)match->data; > > > + conf = (struct mtk_dpi_conf *)match->data; > > > > > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > dpi->regs = devm_ioremap_resource(dev, mem); > > > @@ -679,24 +777,9 @@ static int mtk_dpi_probe(struct platform_device *pdev) > > > return ret; > > > } > > > > > > - dpi->engine_clk = devm_clk_get(dev, "engine"); > > > - if (IS_ERR(dpi->engine_clk)) { > > > - ret = PTR_ERR(dpi->engine_clk); > > > - dev_err(dev, "Failed to get engine clock: %d\n", ret); > > > - return ret; > > > - } > > > - > > > - dpi->pixel_clk = devm_clk_get(dev, "pixel"); > > > - if (IS_ERR(dpi->pixel_clk)) { > > > - ret = PTR_ERR(dpi->pixel_clk); > > > - dev_err(dev, "Failed to get pixel clock: %d\n", ret); > > > - return ret; > > > - } > > > - > > > - dpi->tvd_clk = devm_clk_get(dev, "pll"); > > > - if (IS_ERR(dpi->tvd_clk)) { > > > - ret = PTR_ERR(dpi->tvd_clk); > > > - dev_err(dev, "Failed to get tvdpll clock: %d\n", ret); > > > + ret = conf->parse_clk_from_dt(dpi, np); > > > + if (ret) { > > > + dev_err(dev, "parse tvd div clk failed!"); > > > return ret; > > > } > > > > > > @@ -754,11 +837,6 @@ static int mtk_dpi_remove(struct platform_device *pdev) > > > return 0; > > > } > > > > > > -static const struct of_device_id mtk_dpi_of_ids[] = { > > > - { .compatible = "mediatek,mt8173-dpi", }, > > > - {} > > > -}; > > > - > > > struct platform_driver mtk_dpi_driver = { > > > .probe = mtk_dpi_probe, > > > .remove = mtk_dpi_remove, > > > > Regards, > > CK > > > Regards, CK >
Hi, CK, Thanks for your comments. On Mon, 2016-07-25 at 14:49 +0800, CK Hu wrote: > Hi, Bibby: > > On Mon, 2016-07-25 at 14:24 +0800, Bibby Hsieh wrote: > > Hi, CK, > > > > Thanks for your comments. > > > > On Wed, 2016-07-20 at 15:57 +0800, CK Hu wrote: > > > Hi, Bibby: > > > > > > Some comments inline. > > > > > > On Wed, 2016-07-20 at 12:03 +0800, Bibby Hsieh wrote: > > > > From: Junzhi Zhao <junzhi.zhao@mediatek.com> > > > > > > > > Pixel clock should be 297MHz when resolution is 4K. > > > > > > > > Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com> > > > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > > > > --- > > > > drivers/gpu/drm/mediatek/mtk_dpi.c | 184 +++++++++++++++++++++++++----------- > > > > 1 file changed, 131 insertions(+), 53 deletions(-) > > > > > > [snip...] > > > > > > > > > +static int mt8173_parse_clk_from_dt(struct mtk_dpi *dpi, struct device_node *np) > > > > +{ > > > > + int i; > > > > + > > > > + for (i = 0; i < ARRAY_SIZE(mtk_dpi_clk_names); i++) { > > > > + dpi->clk[i] = of_clk_get_by_name(np, > > > > + mtk_dpi_clk_names[i]); > > > > + if (IS_ERR(dpi->clk[i])) > > > > + return PTR_ERR(dpi->clk[i]); > > > > + } > > > > + return 0; > > > > +} > > > > > > I think parsing device tree is a pure SW behavior. Would this vary for > > > different MTK soc? > > > > > Yes > > I can not imaging that, so could you give me an example source code of > other MTK soc for parse_clk_from_dt()? > I will do some changes according to your comments. > > > > + > > > > + > > > > +static const struct mtk_dpi_conf mt8173_conf = { > > > > + .parse_clk_from_dt = mt8173_parse_clk_from_dt, > > > > + .clk_config = mt8173_clk_config, > > > > +}; > > > > + > > > > +static const struct of_device_id mtk_dpi_of_ids[] = { > > > > + { .compatible = "mediatek,mt8173-dpi", > > > > + .data = &mt8173_conf, > > > > + }, > > > > + {} > > > > +}; > > > > + > > > > static int mtk_dpi_probe(struct platform_device *pdev) > > > > { > > > > struct device *dev = &pdev->dev; > > > > struct mtk_dpi *dpi; > > > > struct resource *mem; > > > > + struct device_node *np = dev->of_node; > > > > struct device_node *ep, *bridge_node = NULL; > > > > int comp_id; > > > > + const struct of_device_id *match; > > > > + struct mtk_dpi_conf *conf; > > > > int ret; > > > > > > > > + match = of_match_node(mtk_dpi_of_ids, dev->of_node); > > > > + if (!match) > > > > + return -ENODEV; > > > > + > > > > dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL); > > > > if (!dpi) > > > > return -ENOMEM; > > > > > > > > dpi->dev = dev; > > > > + dpi->data = (void *)match->data; > > > > + conf = (struct mtk_dpi_conf *)match->data; > > > > > > > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > > dpi->regs = devm_ioremap_resource(dev, mem); > > > > @@ -679,24 +777,9 @@ static int mtk_dpi_probe(struct platform_device *pdev) > > > > return ret; > > > > } > > > > > > > > - dpi->engine_clk = devm_clk_get(dev, "engine"); > > > > - if (IS_ERR(dpi->engine_clk)) { > > > > - ret = PTR_ERR(dpi->engine_clk); > > > > - dev_err(dev, "Failed to get engine clock: %d\n", ret); > > > > - return ret; > > > > - } > > > > - > > > > - dpi->pixel_clk = devm_clk_get(dev, "pixel"); > > > > - if (IS_ERR(dpi->pixel_clk)) { > > > > - ret = PTR_ERR(dpi->pixel_clk); > > > > - dev_err(dev, "Failed to get pixel clock: %d\n", ret); > > > > - return ret; > > > > - } > > > > - > > > > - dpi->tvd_clk = devm_clk_get(dev, "pll"); > > > > - if (IS_ERR(dpi->tvd_clk)) { > > > > - ret = PTR_ERR(dpi->tvd_clk); > > > > - dev_err(dev, "Failed to get tvdpll clock: %d\n", ret); > > > > + ret = conf->parse_clk_from_dt(dpi, np); > > > > + if (ret) { > > > > + dev_err(dev, "parse tvd div clk failed!"); > > > > return ret; > > > > } > > > > > > > > @@ -754,11 +837,6 @@ static int mtk_dpi_remove(struct platform_device *pdev) > > > > return 0; > > > > } > > > > > > > > -static const struct of_device_id mtk_dpi_of_ids[] = { > > > > - { .compatible = "mediatek,mt8173-dpi", }, > > > > - {} > > > > -}; > > > > - > > > > struct platform_driver mtk_dpi_driver = { > > > > .probe = mtk_dpi_probe, > > > > .remove = mtk_dpi_remove, > > > > > > Regards, > > > CK > > > > > > > > Regards, > CK > > > >
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index d05ca79..c0f04d2 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format { MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL }; +enum mtk_dpi_clk_id { + MTK_DPI_CLK_DPI_ENGINE, + MTK_DPI_CLK_DPI_PIXEL, + MTK_DPI_CLK_TVD_PLL, + MTK_DPI_CLK_TVDPLL_MUX, + MTK_DPI_CLK_TVDPLL_D2, + MTK_DPI_CLK_TVDPLL_D4, + MTK_DPI_CLK_TVDPLL_D8, + MTK_DPI_CLK_TVDPLL_D16, + MTK_DPI_CLK_COUNT, +}; + +static const char * const mtk_dpi_clk_names[MTK_DPI_CLK_COUNT] = { + [MTK_DPI_CLK_DPI_ENGINE] = "engine", + [MTK_DPI_CLK_DPI_PIXEL] = "pixel", + [MTK_DPI_CLK_TVD_PLL] = "pll", + [MTK_DPI_CLK_TVDPLL_MUX] = "tvdpll_mux", + [MTK_DPI_CLK_TVDPLL_D2] = "tvdpll_d2", + [MTK_DPI_CLK_TVDPLL_D4] = "tvdpll_d4", + [MTK_DPI_CLK_TVDPLL_D8] = "tvdpll_d8", + [MTK_DPI_CLK_TVDPLL_D16] = "tvdpll_d16", +}; + struct mtk_dpi { struct mtk_ddp_comp ddp_comp; struct drm_encoder encoder; void __iomem *regs; struct device *dev; - struct clk *engine_clk; - struct clk *pixel_clk; - struct clk *tvd_clk; + struct clk *clk[MTK_DPI_CLK_COUNT]; int irq; struct drm_display_mode mode; enum mtk_dpi_out_color_format color_format; @@ -76,6 +97,7 @@ struct mtk_dpi { enum mtk_dpi_out_channel_swap channel_swap; bool power_sta; u8 power_ctl; + void *data; }; static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e) @@ -114,6 +136,11 @@ struct mtk_dpi_yc_limit { u16 c_bottom; }; +struct mtk_dpi_conf { + int (*parse_clk_from_dt)(struct mtk_dpi *dpi, struct device_node *np); + int (*clk_config)(struct mtk_dpi *dpi, struct drm_display_mode *mode); +}; + static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask) { u32 tmp = readl(dpi->regs + offset) & ~mask; @@ -377,8 +404,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) return; mtk_dpi_disable(dpi); - clk_disable_unprepare(dpi->pixel_clk); - clk_disable_unprepare(dpi->engine_clk); + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); dpi->power_sta = false; } @@ -395,13 +422,13 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) if (dpi->power_sta) return 0; - ret = clk_prepare_enable(dpi->engine_clk); + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); if (ret) { dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret); goto err_eng; } - ret = clk_prepare_enable(dpi->pixel_clk); + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); if (ret) { dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret); goto err_pixel; @@ -412,7 +439,7 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl) return 0; err_pixel: - clk_disable_unprepare(dpi->engine_clk); + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]); err_eng: dpi->power_ctl &= ~pctl; return ret; @@ -428,34 +455,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, struct mtk_dpi_sync_param vsync_leven = { 0 }; struct mtk_dpi_sync_param vsync_rodd = { 0 }; struct mtk_dpi_sync_param vsync_reven = { 0 }; - unsigned long pix_rate; - unsigned long pll_rate; - unsigned int factor; + struct mtk_dpi_conf *conf; + int ret; if (!dpi) { dev_err(dpi->dev, "invalid argument\n"); return -EINVAL; } - pix_rate = 1000UL * mode->clock; - if (mode->clock <= 74000) - factor = 8 * 3; - else - factor = 4 * 3; - pll_rate = pix_rate * factor; - - dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", - pll_rate, pix_rate); - - clk_set_rate(dpi->tvd_clk, pll_rate); - pll_rate = clk_get_rate(dpi->tvd_clk); - - pix_rate = pll_rate / factor; - clk_set_rate(dpi->pixel_clk, pix_rate); - pix_rate = clk_get_rate(dpi->pixel_clk); - - dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", - pll_rate, pix_rate); + conf = (struct mtk_dpi_conf *)dpi->data; + ret = conf->clk_config(dpi, mode); limit.c_bottom = 0x0010; limit.c_top = 0x0FE0; @@ -656,20 +665,109 @@ static const struct component_ops mtk_dpi_component_ops = { .unbind = mtk_dpi_unbind, }; +static int mt8173_parse_clk_from_dt(struct mtk_dpi *dpi, struct device_node *np) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mtk_dpi_clk_names); i++) { + dpi->clk[i] = of_clk_get_by_name(np, + mtk_dpi_clk_names[i]); + if (IS_ERR(dpi->clk[i])) + return PTR_ERR(dpi->clk[i]); + } + return 0; +} + +static int mt8173_clk_config(struct mtk_dpi *dpi, struct drm_display_mode *mode) +{ + unsigned long pix_rate; + unsigned long pll_rate; + unsigned int factor; + struct clk *parent; + int ret; + + if (mode->clock <= 27000) { + factor = 16 * 3; + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D16]; + } else if (mode->clock <= 74250) { + factor = 8 * 3; + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D8]; + } else if (mode->clock <= 167000) { + factor = 4 * 3; + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D4]; + } else { + factor = 2 * 3; + parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D2]; + } + + pix_rate = 1000UL * mode->clock; + pll_rate = pix_rate * factor; + + dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", + pll_rate, pix_rate); + + ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]); + if (ret) { + dev_err(dpi->dev, "tvdpll_mux enable fail\n"); + return ret; + } + + ret = clk_set_parent(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX], parent); + if (ret) { + dev_err(dpi->dev, "tvdpll_mux set parent fail\n"); + return ret; + } + clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]); + + ret = clk_set_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL], pll_rate); + if (ret) { + dev_err(dpi->dev, "dpi pll_rate set rate fail\n"); + return ret; + } + pll_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL]); + pix_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]); + + dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n", + pll_rate, pix_rate); + + return 0; +} + +static const struct mtk_dpi_conf mt8173_conf = { + .parse_clk_from_dt = mt8173_parse_clk_from_dt, + .clk_config = mt8173_clk_config, +}; + +static const struct of_device_id mtk_dpi_of_ids[] = { + { .compatible = "mediatek,mt8173-dpi", + .data = &mt8173_conf, + }, + {} +}; + static int mtk_dpi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct mtk_dpi *dpi; struct resource *mem; + struct device_node *np = dev->of_node; struct device_node *ep, *bridge_node = NULL; int comp_id; + const struct of_device_id *match; + struct mtk_dpi_conf *conf; int ret; + match = of_match_node(mtk_dpi_of_ids, dev->of_node); + if (!match) + return -ENODEV; + dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL); if (!dpi) return -ENOMEM; dpi->dev = dev; + dpi->data = (void *)match->data; + conf = (struct mtk_dpi_conf *)match->data; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dpi->regs = devm_ioremap_resource(dev, mem); @@ -679,24 +777,9 @@ static int mtk_dpi_probe(struct platform_device *pdev) return ret; } - dpi->engine_clk = devm_clk_get(dev, "engine"); - if (IS_ERR(dpi->engine_clk)) { - ret = PTR_ERR(dpi->engine_clk); - dev_err(dev, "Failed to get engine clock: %d\n", ret); - return ret; - } - - dpi->pixel_clk = devm_clk_get(dev, "pixel"); - if (IS_ERR(dpi->pixel_clk)) { - ret = PTR_ERR(dpi->pixel_clk); - dev_err(dev, "Failed to get pixel clock: %d\n", ret); - return ret; - } - - dpi->tvd_clk = devm_clk_get(dev, "pll"); - if (IS_ERR(dpi->tvd_clk)) { - ret = PTR_ERR(dpi->tvd_clk); - dev_err(dev, "Failed to get tvdpll clock: %d\n", ret); + ret = conf->parse_clk_from_dt(dpi, np); + if (ret) { + dev_err(dev, "parse tvd div clk failed!"); return ret; } @@ -754,11 +837,6 @@ static int mtk_dpi_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mtk_dpi_of_ids[] = { - { .compatible = "mediatek,mt8173-dpi", }, - {} -}; - struct platform_driver mtk_dpi_driver = { .probe = mtk_dpi_probe, .remove = mtk_dpi_remove,