From patchwork Thu May 4 09:32:56 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ryder Lee X-Patchwork-Id: 9711281 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 49CDC60235 for ; Thu, 4 May 2017 09:34:17 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 4B1CB28663 for ; Thu, 4 May 2017 09:34:17 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 4019328667; Thu, 4 May 2017 09:34:17 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.9 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [65.50.211.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id A4DF228663 for ; Thu, 4 May 2017 09:34:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=8sjqOOHJBDgUWw1c6aY4236Om5NrtZFlNrLovfo1mxc=; b=qkOYA7HBHfISTi LGok9IVZVAX0W11vrEOMU+LUSRq1/itohxkPntuLcESWCuGDIJtUPhyJvQbEw8DZlquvZkrFwc0Cu 6mr5S6cTkAQlShcOJn+irac5gbJSnYffol1QGKbCYN8AW1mjxx/SU91qlw3iKpf6hhIf7Cr1/HpmH uTG9kNDwmlXIBumX21nfWJER2ogBphEvJj0l66ib2kEb+mZijQsyl3yFfskfEW1mL0AwI9pgwAd28 LR2ZKs99HQbdWTWbmZwjZItum58NTWzYR4WhADWcSjYHFJbIOp/2q4LxxOA5Ql2kwrN4L1/Qh1Zac wsd2MCkmW5i6hoDdQYjQ==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.87 #1 (Red Hat Linux)) id 1d6D9L-0005e2-29; Thu, 04 May 2017 09:34:15 +0000 Received: from merlin.infradead.org ([2001:4978:20e::2]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1d6D8n-0004uR-HA; Thu, 04 May 2017 09:33:41 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=merlin.20170209; h=Content-Type:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:CC:To:From:Sender:Reply-To: Content-Transfer-Encoding:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id: List-Help:List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=c/WTokyhVuzGO2hUJkXa+fjV4lUaXMpWpA9GMjzGelo=; b=1kjShniRvGmX2B+bMYyT+3hRd GU/3kujN6hpIFgzCP66B9l3cBOBsZ7cT4hWk+VS85ghhUE3z/1yNFDas2vZMiUic1cs82reBlIGkB be0bPkKl6td2Um72DltFPTEYSGucMeGxuNFPPIaxrtoWmAupibKbp9kHjhecFABlRrrmFWmjipIwL VmZ52K9xjFrizcK5PgSKwtqQe2CPGvZZ8mZrF8iuV0jN/Z3GAvVT3dYLijoenyNFPCAy3MuEcpNQl qSBsXaGILlBfgHfFD09wQ8lPdIUMS17T3CWY1b8KvoHtgSZb4I8tXw03bbGDZXj195eZduDL6sqLg dhyKkHRxw==; Received: from [210.61.82.184] (helo=mailgw02.mediatek.com) by merlin.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1d6D8l-0003Vh-KM; Thu, 04 May 2017 09:33:40 +0000 Received: from mtkhts07.mediatek.inc [(172.21.101.69)] by mailgw02.mediatek.com (envelope-from ) (mhqrelay.mediatek.com ESMTP with TLS) with ESMTP id 1057518732; Thu, 04 May 2017 17:33:01 +0800 Received: from mtkslt306.mediatek.inc (10.21.14.136) by mtkhts07.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 14.3.266.1; Thu, 4 May 2017 17:32:59 +0800 From: Ryder Lee To: Bjorn Helgaas , Rob Herring , Arnd Bergmann Subject: [PATCH v2 2/2] dt-bindings: pcie: Add documentation for Mediatek PCIe Date: Thu, 4 May 2017 17:32:56 +0800 Message-ID: <1493890376-6713-3-git-send-email-ryder.lee@mediatek.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1493890376-6713-1-git-send-email-ryder.lee@mediatek.com> References: <1493890376-6713-1-git-send-email-ryder.lee@mediatek.com> MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20170504_053340_096784_0066B53F X-CRM114-Status: GOOD ( 20.89 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Red Hung , linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, Ryder Lee , linux-mediatek@lists.infradead.org, linux-arm-kernel@lists.infradead.org Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Add documentation for PCIe host driver available in MT7623 series SoCs. Signed-off-by: Ryder Lee Acked-by: Rob Herring --- .../bindings/pci/mediatek,mt7623-pcie.txt | 149 +++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt new file mode 100644 index 0000000..9c5d5a7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt @@ -0,0 +1,149 @@ +Mediatek Gen2 PCIe controller which is available on MT7623 series SoCs + +PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root +ports supports a Gen2 1-lane Link and has PIPE interface to PHY. + +Required properties: +- compatible: Should contain "mediatek,mt7623-pcie". +- device_type: Must be "pci" +- reg: Base addresses and lengths of the PCIe controller. +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupts: Three interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following names + - "pcie-int0" + - "pcie-int1" + - "pcie-int2" +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - free_ck :for reference clock of PCIe subsys + - sys_ck0 :for clock of Port0 + - sys_ck1 :for clock of Port1 + - sys_ck2 :for clock of Port2 +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pcie-rst0 :port0 reset + - pcie-rst1 :port1 reset + - pcie-rst2 :port2 reset +- phys: list of PHY specifiers (used by generic PHY framework). +- phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. +- power-domains: A phandle and power domain specifier pair to the power domain + which is responsible for collapsing and restoring power to the peripheral. +- bus-range: Range of bus numbers associated with this controller. +- ranges: + - The first three entries are expected to translate the addresses for the root + port registers, which are referenced by the assigned-addresses property of + the root port nodes (see below). + - The remaining entries setup the mapping for the standard I/O and memory + regions. + Please refer to the standard PCI bus binding document for a more detailed + explanation. + +In addition, the device tree node must have sub-nodes describing each +PCIe port interface, having the following mandatory properties: + +Required properties: +- device_type: Must be "pci" +- assigned-addresses: Address and size of the port configuration registers +- reg: Only the first four bytes are used to refer to the correct bus number + and device number. +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- #interrupt-cells: Must be 1 +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- num-lanes: Number of lanes to use for this port. + +Examples: + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie-controller@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>; /* PCIe shared registers */ + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = , + , + ; + interrupt-names = "pcie-int0", "pcie-int1", "pcie-int2"; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &gic GIC_SPI 193 IRQ_TYPE_NONE>, + <0x0800 0 0 0 &gic GIC_SPI 194 IRQ_TYPE_NONE>, + <0x1000 0 0 0 &gic GIC_SPI 195 IRQ_TYPE_NONE>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x1a142000 0 0x1a142000 0 0x1000 /* Port0 registers */ + 0x82000000 0 0x1a143000 0 0x1a143000 0 0x1000 /* Port1 registers */ + 0x82000000 0 0x1a144000 0 0x1a144000 0 0x1000 /* Port2 registers */ + 0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000000 0 0x1a142000 0 0x1000>; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 193 IRQ_TYPE_NONE>; + ranges; + num-lanes = <1>; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x1a143000 0 0x1000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 194 IRQ_TYPE_NONE>; + ranges; + num-lanes = <1>; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x1a144000 0 0x1000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 195 IRQ_TYPE_NONE>; + ranges; + num-lanes = <1>; + }; + };