| Message ID | 1581922564-24914-4-git-send-email-chun-hung.wu@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: mediatek: add mmc cqhci support | expand |
On 17/02/2020 07:56, Chun-Hung Wu wrote: > Support command queue for mt6779 platform. > a. Add msdc_set_busy_timeout() to calculate emmc write timeout > b. Connect mtk msdc driver to cqhci driver through > host->cq_host->ops = &msdc_cmdq_ops; > c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides > more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO. > d. Use the options below to separate support for CQHCI or not, because > some of our platform does not support CQHCI hence no kernel option: > CONFIG_MMC_CQHCI. > #if IS_ENABLED(CONFIG_MMC_CQHCI) > XXX //Support CQHCI > #else > XXX //Not support CQHCI > #endif > > Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> > --- > drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 119 insertions(+) > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > index 127b0cf..b132397 100644 > --- a/drivers/mmc/host/mtk-sd.c > +++ b/drivers/mmc/host/mtk-sd.c > @@ -31,6 +31,8 @@ > #include <linux/mmc/sdio.h> > #include <linux/mmc/slot-gpio.h> > > +#include "cqhci.h" > + > #define MAX_BD_NUM 1024 > > /*--------------------------------------------------------------------------*/ > @@ -151,6 +153,7 @@ > #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */ > #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */ > #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */ > +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */ > > /* MSDC_INTEN mask */ > #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */ > @@ -181,6 +184,7 @@ > /* SDC_CFG mask */ > #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */ > #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */ > +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */ > #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */ > #define SDC_CFG_SDIO (0x1 << 19) /* RW */ > #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */ > @@ -228,6 +232,7 @@ > #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */ > #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ > > #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ > @@ -431,6 +436,7 @@ struct msdc_host { > struct msdc_save_para save_para; /* used when gate HCLK */ > struct msdc_tune_para def_tune_para; /* default tune setting */ > struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */ > + struct cqhci_host *cq_host; > }; > > static const struct mtk_mmc_compatible mt8135_compat = { > @@ -527,6 +533,18 @@ struct msdc_host { > .use_internal_cd = true, > }; > > +static const struct mtk_mmc_compatible mt6779_compat = { > + .clk_div_bits = 12, I suppose .hs400_tune = false, and with this the driver is basically the same as mt8183. So you should put in the binding description: "mediatek,mt6779-mmc" "mediatek,mt8183-mmc": for mmc host ip compatible with mt6779 > + .hs400_tune = false, > + .pad_tune_reg = MSDC_PAD_TUNE0, > + .async_fifo = true, > + .data_tune = true, > + .busy_check = true, > + .stop_clk_fix = true, > + .enhance_rx = true, > + .support_64g = true, > +}; > + > static const struct of_device_id msdc_of_ids[] = { > { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat}, > { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat}, > @@ -536,6 +554,7 @@ struct msdc_host { > { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat}, > { .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat}, > { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat}, > + { .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat}, With the above mentioned, not needed. The driver will use the fallback compatible mt8183-mmc. If in the future we find anything special with mt6779-mmc we can still add an entry here. Regards, Matthias > {} > }; > MODULE_DEVICE_TABLE(of, msdc_of_ids); > @@ -739,6 +758,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks) > (u32)(timeout > 255 ? 255 : timeout)); > } > > +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks) > +{ > + u64 timeout; > + > + timeout = msdc_timeout_cal(host, ns, clks); > + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC, > + (u32)(timeout > 8191 ? 8191 : timeout)); > +} > + > static void msdc_gate_clock(struct msdc_host *host) > { > clk_disable_unprepare(host->src_clk_cg); > @@ -1425,6 +1453,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb) > pm_runtime_put_noidle(host->dev); > } > > +#if IS_ENABLED(CONFIG_MMC_CQHCI) > +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts) > +{ > + int cmd_err = 0, dat_err = 0; > + > + if (intsts & MSDC_INT_RSPCRCERR) { > + cmd_err = (unsigned int)-EILSEQ; > + dev_err(host->dev, "%s: CMD CRC ERR", __func__); > + } else if (intsts & MSDC_INT_CMDTMO) { > + cmd_err = (unsigned int)-ETIMEDOUT; > + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__); > + } > + > + if (intsts & MSDC_INT_DATCRCERR) { > + dat_err = (unsigned int)-EILSEQ; > + dev_err(host->dev, "%s: DATA CRC ERR", __func__); > + } else if (intsts & MSDC_INT_DATTMO) { > + dat_err = (unsigned int)-ETIMEDOUT; > + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__); > + } > + > + if (cmd_err || dat_err) { > + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x", > + cmd_err, dat_err, intsts); > + } > + > + return cqhci_irq(host->mmc, 0, cmd_err, dat_err); > +} > +#endif > + > static irqreturn_t msdc_irq(int irq, void *dev_id) > { > struct msdc_host *host = (struct msdc_host *) dev_id; > @@ -1461,6 +1519,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) > if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ))) > break; > > +#if IS_ENABLED(CONFIG_MMC_CQHCI) > + if ((host->mmc->caps2 & MMC_CAP2_CQE) && > + (events & MSDC_INT_CMDQ)) { > + msdc_cmdq_irq(host, events); > + /* clear interrupts */ > + writel(events, host->base + MSDC_INT); > + return IRQ_HANDLED; > + } > +#endif > + > if (!mrq) { > dev_err(host->dev, > "%s: MRQ=NULL; events=%08X; event_mask=%08X\n", > @@ -2144,6 +2212,36 @@ static int msdc_get_cd(struct mmc_host *mmc) > return !val; > } > > +static void msdc_cqe_enable(struct mmc_host *mmc) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + > + /* enable cmdq irq */ > + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN); > + /* enable busy check */ > + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); > + /* default write data / busy timeout 20s */ > + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0); > + /* default read data timeout 1s */ > + msdc_set_timeout(host, 1000000000ULL, 0); > +} > + > +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + > + /* disable cmdq irq */ > + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ); > + /* disable busy check */ > + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); > + > + if (recovery) { > + sdr_set_field(host->base + MSDC_DMA_CTRL, > + MSDC_DMA_CTRL_STOP, 1); > + msdc_reset_hw(host); > + } > +} > + > static const struct mmc_host_ops mt_msdc_ops = { > .post_req = msdc_post_req, > .pre_req = msdc_pre_req, > @@ -2160,6 +2258,11 @@ static int msdc_get_cd(struct mmc_host *mmc) > .hw_reset = msdc_hw_reset, > }; > > +static const struct cqhci_host_ops msdc_cmdq_ops = { > + .enable = msdc_cqe_enable, > + .disable = msdc_cqe_disable, > +}; > + > static void msdc_of_property_parse(struct platform_device *pdev, > struct msdc_host *host) > { > @@ -2311,6 +2414,22 @@ static int msdc_drv_probe(struct platform_device *pdev) > host->dma_mask = DMA_BIT_MASK(32); > mmc_dev(mmc)->dma_mask = &host->dma_mask; > > +#if IS_ENABLED(CONFIG_MMC_CQHCI) > + if (mmc->caps2 & MMC_CAP2_CQE) { > + host->cq_host = devm_kzalloc(host->mmc->parent, > + sizeof(*host->cq_host), > + GFP_KERNEL); > + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128; > + host->cq_host->mmio = host->base + 0x800; > + host->cq_host->ops = &msdc_cmdq_ops; > + cqhci_init(host->cq_host, mmc, true); > + mmc->max_segs = 128; > + /* cqhci 16bit length */ > + /* 0 size, means 65536 so we don't have to -1 here */ > + mmc->max_seg_size = 64 * 1024; > + } > +#endif > + > host->timeout_clks = 3 * 1048576; > host->dma.gpd = dma_alloc_coherent(&pdev->dev, > 2 * sizeof(struct mt_gpdma_desc), >
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 127b0cf..b132397 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -31,6 +31,8 @@ #include <linux/mmc/sdio.h> #include <linux/mmc/slot-gpio.h> +#include "cqhci.h" + #define MAX_BD_NUM 1024 /*--------------------------------------------------------------------------*/ @@ -151,6 +153,7 @@ #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */ #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */ #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */ +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */ /* MSDC_INTEN mask */ #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */ @@ -181,6 +184,7 @@ /* SDC_CFG mask */ #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */ #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */ +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */ #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */ #define SDC_CFG_SDIO (0x1 << 19) /* RW */ #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */ @@ -228,6 +232,7 @@ #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */ #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ @@ -431,6 +436,7 @@ struct msdc_host { struct msdc_save_para save_para; /* used when gate HCLK */ struct msdc_tune_para def_tune_para; /* default tune setting */ struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */ + struct cqhci_host *cq_host; }; static const struct mtk_mmc_compatible mt8135_compat = { @@ -527,6 +533,18 @@ struct msdc_host { .use_internal_cd = true, }; +static const struct mtk_mmc_compatible mt6779_compat = { + .clk_div_bits = 12, + .hs400_tune = false, + .pad_tune_reg = MSDC_PAD_TUNE0, + .async_fifo = true, + .data_tune = true, + .busy_check = true, + .stop_clk_fix = true, + .enhance_rx = true, + .support_64g = true, +}; + static const struct of_device_id msdc_of_ids[] = { { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat}, { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat}, @@ -536,6 +554,7 @@ struct msdc_host { { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat}, { .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat}, { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat}, + { .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat}, {} }; MODULE_DEVICE_TABLE(of, msdc_of_ids); @@ -739,6 +758,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks) (u32)(timeout > 255 ? 255 : timeout)); } +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks) +{ + u64 timeout; + + timeout = msdc_timeout_cal(host, ns, clks); + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC, + (u32)(timeout > 8191 ? 8191 : timeout)); +} + static void msdc_gate_clock(struct msdc_host *host) { clk_disable_unprepare(host->src_clk_cg); @@ -1425,6 +1453,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb) pm_runtime_put_noidle(host->dev); } +#if IS_ENABLED(CONFIG_MMC_CQHCI) +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts) +{ + int cmd_err = 0, dat_err = 0; + + if (intsts & MSDC_INT_RSPCRCERR) { + cmd_err = (unsigned int)-EILSEQ; + dev_err(host->dev, "%s: CMD CRC ERR", __func__); + } else if (intsts & MSDC_INT_CMDTMO) { + cmd_err = (unsigned int)-ETIMEDOUT; + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__); + } + + if (intsts & MSDC_INT_DATCRCERR) { + dat_err = (unsigned int)-EILSEQ; + dev_err(host->dev, "%s: DATA CRC ERR", __func__); + } else if (intsts & MSDC_INT_DATTMO) { + dat_err = (unsigned int)-ETIMEDOUT; + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__); + } + + if (cmd_err || dat_err) { + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x", + cmd_err, dat_err, intsts); + } + + return cqhci_irq(host->mmc, 0, cmd_err, dat_err); +} +#endif + static irqreturn_t msdc_irq(int irq, void *dev_id) { struct msdc_host *host = (struct msdc_host *) dev_id; @@ -1461,6 +1519,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ))) break; +#if IS_ENABLED(CONFIG_MMC_CQHCI) + if ((host->mmc->caps2 & MMC_CAP2_CQE) && + (events & MSDC_INT_CMDQ)) { + msdc_cmdq_irq(host, events); + /* clear interrupts */ + writel(events, host->base + MSDC_INT); + return IRQ_HANDLED; + } +#endif + if (!mrq) { dev_err(host->dev, "%s: MRQ=NULL; events=%08X; event_mask=%08X\n", @@ -2144,6 +2212,36 @@ static int msdc_get_cd(struct mmc_host *mmc) return !val; } +static void msdc_cqe_enable(struct mmc_host *mmc) +{ + struct msdc_host *host = mmc_priv(mmc); + + /* enable cmdq irq */ + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN); + /* enable busy check */ + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + /* default write data / busy timeout 20s */ + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0); + /* default read data timeout 1s */ + msdc_set_timeout(host, 1000000000ULL, 0); +} + +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery) +{ + struct msdc_host *host = mmc_priv(mmc); + + /* disable cmdq irq */ + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ); + /* disable busy check */ + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + + if (recovery) { + sdr_set_field(host->base + MSDC_DMA_CTRL, + MSDC_DMA_CTRL_STOP, 1); + msdc_reset_hw(host); + } +} + static const struct mmc_host_ops mt_msdc_ops = { .post_req = msdc_post_req, .pre_req = msdc_pre_req, @@ -2160,6 +2258,11 @@ static int msdc_get_cd(struct mmc_host *mmc) .hw_reset = msdc_hw_reset, }; +static const struct cqhci_host_ops msdc_cmdq_ops = { + .enable = msdc_cqe_enable, + .disable = msdc_cqe_disable, +}; + static void msdc_of_property_parse(struct platform_device *pdev, struct msdc_host *host) { @@ -2311,6 +2414,22 @@ static int msdc_drv_probe(struct platform_device *pdev) host->dma_mask = DMA_BIT_MASK(32); mmc_dev(mmc)->dma_mask = &host->dma_mask; +#if IS_ENABLED(CONFIG_MMC_CQHCI) + if (mmc->caps2 & MMC_CAP2_CQE) { + host->cq_host = devm_kzalloc(host->mmc->parent, + sizeof(*host->cq_host), + GFP_KERNEL); + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + host->cq_host->mmio = host->base + 0x800; + host->cq_host->ops = &msdc_cmdq_ops; + cqhci_init(host->cq_host, mmc, true); + mmc->max_segs = 128; + /* cqhci 16bit length */ + /* 0 size, means 65536 so we don't have to -1 here */ + mmc->max_seg_size = 64 * 1024; + } +#endif + host->timeout_clks = 3 * 1048576; host->dma.gpd = dma_alloc_coherent(&pdev->dev, 2 * sizeof(struct mt_gpdma_desc),
Support command queue for mt6779 platform. a. Add msdc_set_busy_timeout() to calculate emmc write timeout b. Connect mtk msdc driver to cqhci driver through host->cq_host->ops = &msdc_cmdq_ops; c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO. d. Use the options below to separate support for CQHCI or not, because some of our platform does not support CQHCI hence no kernel option: CONFIG_MMC_CQHCI. #if IS_ENABLED(CONFIG_MMC_CQHCI) XXX //Support CQHCI #else XXX //Not support CQHCI #endif Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> --- drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+)