@@ -747,6 +747,69 @@ static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
}
}
+static int vf610_nfc_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ vf610_nfc_init_controller(nfc);
+
+ /* Bad block options. */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
+ /* Single buffer only, max 256 OOB minus ECC status */
+ if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
+ dev_err(nfc->dev, "Unsupported flash page size\n");
+ return -ENXIO;
+ }
+
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
+ dev_err(nfc->dev, "Unsupported flash with hwecc\n");
+ return -ENXIO;
+ }
+
+ if (chip->ecc.size != mtd->writesize) {
+ dev_err(nfc->dev, "Step size needs to be page size\n");
+ return -ENXIO;
+ }
+
+ /* Only 64 byte ECC layouts known */
+ if (mtd->oobsize > 64)
+ mtd->oobsize = 64;
+
+ /* Use default large page ECC layout defined in NAND core */
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ if (chip->ecc.strength == 32) {
+ nfc->ecc_mode = ECC_60_BYTE;
+ chip->ecc.bytes = 60;
+ } else if (chip->ecc.strength == 24) {
+ nfc->ecc_mode = ECC_45_BYTE;
+ chip->ecc.bytes = 45;
+ } else {
+ dev_err(nfc->dev, "Unsupported ECC strength\n");
+ return -ENXIO;
+ }
+
+ chip->ecc.read_page = vf610_nfc_read_page;
+ chip->ecc.write_page = vf610_nfc_write_page;
+ chip->ecc.read_page_raw = vf610_nfc_read_page_raw;
+ chip->ecc.write_page_raw = vf610_nfc_write_page_raw;
+ chip->ecc.read_oob = vf610_nfc_read_oob;
+ chip->ecc.write_oob = vf610_nfc_write_oob;
+
+ chip->ecc.size = PAGE_2K;
+
+ return 0;
+}
+
+static struct nand_controller_ops vf610_nfc_controller_ops = {
+ .attach_chip = vf610_nfc_attach_chip,
+};
+
static int vf610_nfc_probe(struct platform_device *pdev)
{
struct vf610_nfc *nfc;
@@ -827,67 +890,9 @@ static int vf610_nfc_probe(struct platform_device *pdev)
vf610_nfc_preinit_controller(nfc);
- /* first scan to find the device and get the page size */
- err = nand_scan_ident(mtd, 1, NULL);
- if (err)
- goto err_disable_clk;
-
- vf610_nfc_init_controller(nfc);
-
- /* Bad block options. */
- if (chip->bbt_options & NAND_BBT_USE_FLASH)
- chip->bbt_options |= NAND_BBT_NO_OOB;
-
- /* Single buffer only, max 256 OOB minus ECC status */
- if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
- dev_err(nfc->dev, "Unsupported flash page size\n");
- err = -ENXIO;
- goto err_disable_clk;
- }
-
- if (chip->ecc.mode == NAND_ECC_HW) {
- if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
- dev_err(nfc->dev, "Unsupported flash with hwecc\n");
- err = -ENXIO;
- goto err_disable_clk;
- }
-
- if (chip->ecc.size != mtd->writesize) {
- dev_err(nfc->dev, "Step size needs to be page size\n");
- err = -ENXIO;
- goto err_disable_clk;
- }
-
- /* Only 64 byte ECC layouts known */
- if (mtd->oobsize > 64)
- mtd->oobsize = 64;
-
- /* Use default large page ECC layout defined in NAND core */
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
- if (chip->ecc.strength == 32) {
- nfc->ecc_mode = ECC_60_BYTE;
- chip->ecc.bytes = 60;
- } else if (chip->ecc.strength == 24) {
- nfc->ecc_mode = ECC_45_BYTE;
- chip->ecc.bytes = 45;
- } else {
- dev_err(nfc->dev, "Unsupported ECC strength\n");
- err = -ENXIO;
- goto err_disable_clk;
- }
-
- chip->ecc.read_page = vf610_nfc_read_page;
- chip->ecc.write_page = vf610_nfc_write_page;
- chip->ecc.read_page_raw = vf610_nfc_read_page_raw;
- chip->ecc.write_page_raw = vf610_nfc_write_page_raw;
- chip->ecc.read_oob = vf610_nfc_read_oob;
- chip->ecc.write_oob = vf610_nfc_write_oob;
-
- chip->ecc.size = PAGE_2K;
- }
-
- /* second phase scan */
- err = nand_scan_tail(mtd);
+ /* Scan the NAND chip */
+ chip->dummy_controller.ops = &vf610_nfc_controller_ops;
+ err = nand_scan(mtd, 1);
if (err)
goto err_disable_clk;
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/vf610_nfc.c | 127 ++++++++++++++++++++------------------- 1 file changed, 66 insertions(+), 61 deletions(-)