| Message ID | 20180720151527.16038-23-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 20 Jul 2018 17:15:14 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Two helpers have been added to the core to make ECC-related > configuration between the detection phase and the final NAND scan. Use > these hooks and convert the driver to just use nand_scan() instead of > both nand_scan_ident() and nand_scan_tail(). > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/mtd/nand/raw/tango_nand.c | 40 +++++++++++++++++++++++---------------- > 1 file changed, 24 insertions(+), 16 deletions(-) > > diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c > index dd7a26efdf4f..a448d0797cd5 100644 > --- a/drivers/mtd/nand/raw/tango_nand.c > +++ b/drivers/mtd/nand/raw/tango_nand.c > @@ -517,6 +517,28 @@ static int tango_set_timings(struct mtd_info *mtd, int csline, > return 0; > } > > +static int tango_attach_chip(struct nand_chip *chip) > +{ > + struct nand_ecc_ctrl *ecc = &chip->ecc; > + > + ecc->mode = NAND_ECC_HW; > + ecc->algo = NAND_ECC_BCH; > + ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE); > + > + ecc->read_page_raw = tango_read_page_raw; > + ecc->write_page_raw = tango_write_page_raw; > + ecc->read_page = tango_read_page; > + ecc->write_page = tango_write_page; > + ecc->read_oob = tango_read_oob; > + ecc->write_oob = tango_write_oob; > + > + return 0; > +} > + > +static const struct nand_controller_ops tango_controller_ops = { > + .attach_chip = tango_attach_chip, > +}; > + > static int chip_init(struct device *dev, struct device_node *np) > { > u32 cs; > @@ -560,28 +582,14 @@ static int chip_init(struct device *dev, struct device_node *np) > NAND_NO_SUBPAGE_WRITE | > NAND_WAIT_TCCS; > chip->controller = &nfc->hw; > + chip->controller->ops = &tango_controller_ops; Move this assignment here [1]. With that fixed: Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> > tchip->base = nfc->pbus_base + (cs * 256); > > nand_set_flash_node(chip, np); > mtd_set_ooblayout(mtd, &tango_nand_ooblayout_ops); > mtd->dev.parent = dev; > > - err = nand_scan_ident(mtd, 1, NULL); > - if (err) > - return err; > - > - ecc->mode = NAND_ECC_HW; > - ecc->algo = NAND_ECC_BCH; > - ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE); > - > - ecc->read_page_raw = tango_read_page_raw; > - ecc->write_page_raw = tango_write_page_raw; > - ecc->read_page = tango_read_page; > - ecc->write_page = tango_write_page; > - ecc->read_oob = tango_read_oob; > - ecc->write_oob = tango_write_oob; > - > - err = nand_scan_tail(mtd); > + err = nand_scan(mtd, 1); > if (err) > return err; > [1]https://elixir.bootlin.com/linux/v4.18-rc5/source/drivers/mtd/nand/raw/tango_nand.c#L657
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c index dd7a26efdf4f..a448d0797cd5 100644 --- a/drivers/mtd/nand/raw/tango_nand.c +++ b/drivers/mtd/nand/raw/tango_nand.c @@ -517,6 +517,28 @@ static int tango_set_timings(struct mtd_info *mtd, int csline, return 0; } +static int tango_attach_chip(struct nand_chip *chip) +{ + struct nand_ecc_ctrl *ecc = &chip->ecc; + + ecc->mode = NAND_ECC_HW; + ecc->algo = NAND_ECC_BCH; + ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE); + + ecc->read_page_raw = tango_read_page_raw; + ecc->write_page_raw = tango_write_page_raw; + ecc->read_page = tango_read_page; + ecc->write_page = tango_write_page; + ecc->read_oob = tango_read_oob; + ecc->write_oob = tango_write_oob; + + return 0; +} + +static const struct nand_controller_ops tango_controller_ops = { + .attach_chip = tango_attach_chip, +}; + static int chip_init(struct device *dev, struct device_node *np) { u32 cs; @@ -560,28 +582,14 @@ static int chip_init(struct device *dev, struct device_node *np) NAND_NO_SUBPAGE_WRITE | NAND_WAIT_TCCS; chip->controller = &nfc->hw; + chip->controller->ops = &tango_controller_ops; tchip->base = nfc->pbus_base + (cs * 256); nand_set_flash_node(chip, np); mtd_set_ooblayout(mtd, &tango_nand_ooblayout_ops); mtd->dev.parent = dev; - err = nand_scan_ident(mtd, 1, NULL); - if (err) - return err; - - ecc->mode = NAND_ECC_HW; - ecc->algo = NAND_ECC_BCH; - ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE); - - ecc->read_page_raw = tango_read_page_raw; - ecc->write_page_raw = tango_write_page_raw; - ecc->read_page = tango_read_page; - ecc->write_page = tango_write_page; - ecc->read_oob = tango_read_oob; - ecc->write_oob = tango_write_oob; - - err = nand_scan_tail(mtd); + err = nand_scan(mtd, 1); if (err) return err;
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/tango_nand.c | 40 +++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-)