| Message ID | 20180720151527.16038-30-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 20 Jul 2018 17:15:21 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Two helpers have been added to the core to make ECC-related > configuration between the detection phase and the final NAND scan. Use > these hooks and convert the driver to just use nand_scan() instead of > both nand_scan_ident() and nand_scan_tail(). > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/mtd/nand/raw/docg4.c | 55 ++++++++++++++++++++++++++------------------ > 1 file changed, 32 insertions(+), 23 deletions(-) > > diff --git a/drivers/mtd/nand/raw/docg4.c b/drivers/mtd/nand/raw/docg4.c > index 4dccdfba6140..fec4353ff4ef 100644 > --- a/drivers/mtd/nand/raw/docg4.c > +++ b/drivers/mtd/nand/raw/docg4.c > @@ -1227,10 +1227,9 @@ static void __init init_mtd_structs(struct mtd_info *mtd) > * required within a nand driver because they are performed by the nand > * infrastructure code as part of nand_scan(). In this case they need > * to be initialized here because we skip call to nand_scan_ident() (the > - * first half of nand_scan()). The call to nand_scan_ident() is skipped > - * because for this device the chip id is not read in the manner of a > - * standard nand device. Unfortunately, nand_scan_ident() does other > - * things as well, such as call nand_set_defaults(). > + * first half of nand_scan()). The call to nand_scan_ident() could be > + * skipped because for this device the chip id is not read in the manner > + * of a standard nand device. > */ > > struct nand_chip *nand = mtd_to_nand(mtd); > @@ -1315,6 +1314,27 @@ static int __init read_id_reg(struct mtd_info *mtd) > > static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL }; > > +static int docg4_attach_chip(struct nand_chip *chip) > +{ > + struct mtd_info *mtd = nand_to_mtd(chip); > + struct docg4_priv *doc = (struct docg4_priv *)(chip + 1); > + > + init_mtd_structs(mtd); > + > + /* Initialize kernel BCH algorithm */ > + doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); > + if (!doc->bch) > + return -EINVAL; > + You need a ->detach_chip() hook to free the BCH context, don't you? > + reset(mtd); > + > + return read_id_reg(mtd); > +} > + > +static const struct nand_controller_ops docg4_controller_ops = { > + .attach_chip = docg4_attach_chip, > +}; > + > static int __init probe_docg4(struct platform_device *pdev) > { > struct mtd_info *mtd; > @@ -1350,26 +1370,16 @@ static int __init probe_docg4(struct platform_device *pdev) > mtd->dev.parent = &pdev->dev; > doc->virtadr = virtadr; > doc->dev = dev; > - > - init_mtd_structs(mtd); > - > - /* initialize kernel bch algorithm */ > - doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); > - if (doc->bch == NULL) { > - retval = -EINVAL; > - goto free_nand; > - } > - > platform_set_drvdata(pdev, doc); > > - reset(mtd); > - retval = read_id_reg(mtd); > - if (retval == -ENODEV) { > - dev_warn(dev, "No diskonchip G4 device found.\n"); > - goto free_bch; > - } > - > - retval = nand_scan_tail(mtd); > + /* > + * Asking for 0 chips is useless here but it warns the user that the use > + * of the nand_scan() function is a bit abused here because the > + * initialization is actually a bit specific and re-handled again in the > + * ->attach_chip() hook. It will probably leak some memory though. I don't get the last part. Is there really a memory leak? In that case we should find a solution to prevent that. > + */ > + nand->dummy_controller.ops = &docg4_controller_ops; > + retval = nand_scan(mtd, 0); > if (retval) > goto free_bch; > > @@ -1389,7 +1399,6 @@ static int __init probe_docg4(struct platform_device *pdev) > nand_cleanup(nand); > free_bch: > free_bch(doc->bch); This should be done in the ->detach_chip() hook. > -free_nand: > kfree(nand); > unmap: > iounmap(virtadr);
diff --git a/drivers/mtd/nand/raw/docg4.c b/drivers/mtd/nand/raw/docg4.c index 4dccdfba6140..fec4353ff4ef 100644 --- a/drivers/mtd/nand/raw/docg4.c +++ b/drivers/mtd/nand/raw/docg4.c @@ -1227,10 +1227,9 @@ static void __init init_mtd_structs(struct mtd_info *mtd) * required within a nand driver because they are performed by the nand * infrastructure code as part of nand_scan(). In this case they need * to be initialized here because we skip call to nand_scan_ident() (the - * first half of nand_scan()). The call to nand_scan_ident() is skipped - * because for this device the chip id is not read in the manner of a - * standard nand device. Unfortunately, nand_scan_ident() does other - * things as well, such as call nand_set_defaults(). + * first half of nand_scan()). The call to nand_scan_ident() could be + * skipped because for this device the chip id is not read in the manner + * of a standard nand device. */ struct nand_chip *nand = mtd_to_nand(mtd); @@ -1315,6 +1314,27 @@ static int __init read_id_reg(struct mtd_info *mtd) static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL }; +static int docg4_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct docg4_priv *doc = (struct docg4_priv *)(chip + 1); + + init_mtd_structs(mtd); + + /* Initialize kernel BCH algorithm */ + doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); + if (!doc->bch) + return -EINVAL; + + reset(mtd); + + return read_id_reg(mtd); +} + +static const struct nand_controller_ops docg4_controller_ops = { + .attach_chip = docg4_attach_chip, +}; + static int __init probe_docg4(struct platform_device *pdev) { struct mtd_info *mtd; @@ -1350,26 +1370,16 @@ static int __init probe_docg4(struct platform_device *pdev) mtd->dev.parent = &pdev->dev; doc->virtadr = virtadr; doc->dev = dev; - - init_mtd_structs(mtd); - - /* initialize kernel bch algorithm */ - doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); - if (doc->bch == NULL) { - retval = -EINVAL; - goto free_nand; - } - platform_set_drvdata(pdev, doc); - reset(mtd); - retval = read_id_reg(mtd); - if (retval == -ENODEV) { - dev_warn(dev, "No diskonchip G4 device found.\n"); - goto free_bch; - } - - retval = nand_scan_tail(mtd); + /* + * Asking for 0 chips is useless here but it warns the user that the use + * of the nand_scan() function is a bit abused here because the + * initialization is actually a bit specific and re-handled again in the + * ->attach_chip() hook. It will probably leak some memory though. + */ + nand->dummy_controller.ops = &docg4_controller_ops; + retval = nand_scan(mtd, 0); if (retval) goto free_bch; @@ -1389,7 +1399,6 @@ static int __init probe_docg4(struct platform_device *pdev) nand_cleanup(nand); free_bch: free_bch(doc->bch); -free_nand: kfree(nand); unmap: iounmap(virtadr);
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/docg4.c | 55 ++++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 23 deletions(-)