| Message ID | 20180720151527.16038-4-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 20 Jul 2018 17:14:55 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Two helpers have been added to the core to make ECC-related > configuration between the detection phase and the final NAND scan. Use > these hooks and convert the driver to just use nand_scan() instead of > both nand_scan_ident() and nand_scan_tail(). > > Also change the unused "struct device *dev" parameter of the driver > structure into a platform device to reuse it in the ->attach_chip() > hook. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/mtd/nand/raw/davinci_nand.c | 195 +++++++++++++++++++----------------- > 1 file changed, 102 insertions(+), 93 deletions(-) > > diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c > index 626c9363e460..40145e206a6b 100644 > --- a/drivers/mtd/nand/raw/davinci_nand.c > +++ b/drivers/mtd/nand/raw/davinci_nand.c > @@ -53,7 +53,7 @@ > struct davinci_nand_info { > struct nand_chip chip; > > - struct device *dev; > + struct platform_device *pdev; For the record, there's a to_platform_device() macro you can use to get a platform_device object from a device one, so this change was not really needed. Actually, you should not even need a ->dev field here because it can be retrieved from mtd->dev.parent. Anyway, if you patched all places using davinci->dev to now use &davinci->pdev->dev we should be good. Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> > > bool is_readmode; > > @@ -605,6 +605,104 @@ static struct davinci_nand_pdata > } > #endif > > +static int davinci_nand_attach_chip(struct nand_chip *chip) > +{ > + struct mtd_info *mtd = nand_to_mtd(chip); > + struct davinci_nand_info *info = to_davinci_nand(mtd); > + struct davinci_nand_pdata *pdata = nand_davinci_get_pdata(info->pdev); > + int ret = 0; > + > + if (IS_ERR(pdata)) > + return PTR_ERR(pdata); > + > + switch (info->chip.ecc.mode) { > + case NAND_ECC_NONE: > + pdata->ecc_bits = 0; > + break; > + case NAND_ECC_SOFT: > + pdata->ecc_bits = 0; > + /* > + * This driver expects Hamming based ECC when ecc_mode is set > + * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to > + * avoid adding an extra ->ecc_algo field to > + * davinci_nand_pdata. > + */ > + info->chip.ecc.algo = NAND_ECC_HAMMING; > + break; > + case NAND_ECC_HW: > + if (pdata->ecc_bits == 4) { > + /* > + * No sanity checks: CPUs must support this, > + * and the chips may not use NAND_BUSWIDTH_16. > + */ > + > + /* No sharing 4-bit hardware between chipselects yet */ > + spin_lock_irq(&davinci_nand_lock); > + if (ecc4_busy) > + ret = -EBUSY; > + else > + ecc4_busy = true; > + spin_unlock_irq(&davinci_nand_lock); > + > + if (ret == -EBUSY) > + return ret; > + > + info->chip.ecc.calculate = nand_davinci_calculate_4bit; > + info->chip.ecc.correct = nand_davinci_correct_4bit; > + info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; > + info->chip.ecc.bytes = 10; > + info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; > + info->chip.ecc.algo = NAND_ECC_BCH; > + } else { > + /* 1bit ecc hamming */ > + info->chip.ecc.calculate = nand_davinci_calculate_1bit; > + info->chip.ecc.correct = nand_davinci_correct_1bit; > + info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; > + info->chip.ecc.bytes = 3; > + info->chip.ecc.algo = NAND_ECC_HAMMING; > + } > + info->chip.ecc.size = 512; > + info->chip.ecc.strength = pdata->ecc_bits; > + break; > + default: > + return -EINVAL; > + } > + > + /* > + * Update ECC layout if needed ... for 1-bit HW ECC, the default > + * is OK, but it allocates 6 bytes when only 3 are needed (for > + * each 512 bytes). For the 4-bit HW ECC, that default is not > + * usable: 10 bytes are needed, not 6. > + */ > + if (pdata->ecc_bits == 4) { > + int chunks = mtd->writesize / 512; > + > + if (!chunks || mtd->oobsize < 16) { > + dev_dbg(&info->pdev->dev, "too small\n"); > + return -EINVAL; > + } > + > + /* For small page chips, preserve the manufacturer's > + * badblock marking data ... and make sure a flash BBT > + * table marker fits in the free bytes. > + */ > + if (chunks == 1) { > + mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); > + } else if (chunks == 4 || chunks == 8) { > + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); > + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; > + } else { > + return -EIO; > + } > + } > + > + return ret; > +} > + > +static const struct nand_controller_ops davinci_nand_controller_ops = { > + .attach_chip = davinci_nand_attach_chip, > +}; > + > static int nand_davinci_probe(struct platform_device *pdev) > { > struct davinci_nand_pdata *pdata; > @@ -658,7 +756,7 @@ static int nand_davinci_probe(struct platform_device *pdev) > return -EADDRNOTAVAIL; > } > > - info->dev = &pdev->dev; > + info->pdev = pdev; > info->base = base; > info->vaddr = vaddr; > > @@ -708,97 +806,13 @@ static int nand_davinci_probe(struct platform_device *pdev) > spin_unlock_irq(&davinci_nand_lock); > > /* Scan to find existence of the device(s) */ > - ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL); > + info->chip.dummy_controller.ops = &davinci_nand_controller_ops; > + ret = nand_scan(mtd, pdata->mask_chipsel ? 2 : 1); > if (ret < 0) { > dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); > return ret; > } > > - switch (info->chip.ecc.mode) { > - case NAND_ECC_NONE: > - pdata->ecc_bits = 0; > - break; > - case NAND_ECC_SOFT: > - pdata->ecc_bits = 0; > - /* > - * This driver expects Hamming based ECC when ecc_mode is set > - * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to > - * avoid adding an extra ->ecc_algo field to > - * davinci_nand_pdata. > - */ > - info->chip.ecc.algo = NAND_ECC_HAMMING; > - break; > - case NAND_ECC_HW: > - if (pdata->ecc_bits == 4) { > - /* No sanity checks: CPUs must support this, > - * and the chips may not use NAND_BUSWIDTH_16. > - */ > - > - /* No sharing 4-bit hardware between chipselects yet */ > - spin_lock_irq(&davinci_nand_lock); > - if (ecc4_busy) > - ret = -EBUSY; > - else > - ecc4_busy = true; > - spin_unlock_irq(&davinci_nand_lock); > - > - if (ret == -EBUSY) > - return ret; > - > - info->chip.ecc.calculate = nand_davinci_calculate_4bit; > - info->chip.ecc.correct = nand_davinci_correct_4bit; > - info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; > - info->chip.ecc.bytes = 10; > - info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; > - info->chip.ecc.algo = NAND_ECC_BCH; > - } else { > - /* 1bit ecc hamming */ > - info->chip.ecc.calculate = nand_davinci_calculate_1bit; > - info->chip.ecc.correct = nand_davinci_correct_1bit; > - info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; > - info->chip.ecc.bytes = 3; > - info->chip.ecc.algo = NAND_ECC_HAMMING; > - } > - info->chip.ecc.size = 512; > - info->chip.ecc.strength = pdata->ecc_bits; > - break; > - default: > - return -EINVAL; > - } > - > - /* Update ECC layout if needed ... for 1-bit HW ECC, the default > - * is OK, but it allocates 6 bytes when only 3 are needed (for > - * each 512 bytes). For the 4-bit HW ECC, that default is not > - * usable: 10 bytes are needed, not 6. > - */ > - if (pdata->ecc_bits == 4) { > - int chunks = mtd->writesize / 512; > - > - if (!chunks || mtd->oobsize < 16) { > - dev_dbg(&pdev->dev, "too small\n"); > - ret = -EINVAL; > - goto err; > - } > - > - /* For small page chips, preserve the manufacturer's > - * badblock marking data ... and make sure a flash BBT > - * table marker fits in the free bytes. > - */ > - if (chunks == 1) { > - mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); > - } else if (chunks == 4 || chunks == 8) { > - mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); > - info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; > - } else { > - ret = -EIO; > - goto err; > - } > - } > - > - ret = nand_scan_tail(mtd); > - if (ret < 0) > - goto err; > - > if (pdata->parts) > ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts); > else > @@ -815,11 +829,6 @@ static int nand_davinci_probe(struct platform_device *pdev) > err_cleanup_nand: > nand_cleanup(&info->chip); > > -err: > - spin_lock_irq(&davinci_nand_lock); > - if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) > - ecc4_busy = false; > - spin_unlock_irq(&davinci_nand_lock); > return ret; > } >
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index 626c9363e460..40145e206a6b 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -53,7 +53,7 @@ struct davinci_nand_info { struct nand_chip chip; - struct device *dev; + struct platform_device *pdev; bool is_readmode; @@ -605,6 +605,104 @@ static struct davinci_nand_pdata } #endif +static int davinci_nand_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct davinci_nand_info *info = to_davinci_nand(mtd); + struct davinci_nand_pdata *pdata = nand_davinci_get_pdata(info->pdev); + int ret = 0; + + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + + switch (info->chip.ecc.mode) { + case NAND_ECC_NONE: + pdata->ecc_bits = 0; + break; + case NAND_ECC_SOFT: + pdata->ecc_bits = 0; + /* + * This driver expects Hamming based ECC when ecc_mode is set + * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to + * avoid adding an extra ->ecc_algo field to + * davinci_nand_pdata. + */ + info->chip.ecc.algo = NAND_ECC_HAMMING; + break; + case NAND_ECC_HW: + if (pdata->ecc_bits == 4) { + /* + * No sanity checks: CPUs must support this, + * and the chips may not use NAND_BUSWIDTH_16. + */ + + /* No sharing 4-bit hardware between chipselects yet */ + spin_lock_irq(&davinci_nand_lock); + if (ecc4_busy) + ret = -EBUSY; + else + ecc4_busy = true; + spin_unlock_irq(&davinci_nand_lock); + + if (ret == -EBUSY) + return ret; + + info->chip.ecc.calculate = nand_davinci_calculate_4bit; + info->chip.ecc.correct = nand_davinci_correct_4bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; + info->chip.ecc.bytes = 10; + info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; + info->chip.ecc.algo = NAND_ECC_BCH; + } else { + /* 1bit ecc hamming */ + info->chip.ecc.calculate = nand_davinci_calculate_1bit; + info->chip.ecc.correct = nand_davinci_correct_1bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; + info->chip.ecc.bytes = 3; + info->chip.ecc.algo = NAND_ECC_HAMMING; + } + info->chip.ecc.size = 512; + info->chip.ecc.strength = pdata->ecc_bits; + break; + default: + return -EINVAL; + } + + /* + * Update ECC layout if needed ... for 1-bit HW ECC, the default + * is OK, but it allocates 6 bytes when only 3 are needed (for + * each 512 bytes). For the 4-bit HW ECC, that default is not + * usable: 10 bytes are needed, not 6. + */ + if (pdata->ecc_bits == 4) { + int chunks = mtd->writesize / 512; + + if (!chunks || mtd->oobsize < 16) { + dev_dbg(&info->pdev->dev, "too small\n"); + return -EINVAL; + } + + /* For small page chips, preserve the manufacturer's + * badblock marking data ... and make sure a flash BBT + * table marker fits in the free bytes. + */ + if (chunks == 1) { + mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); + } else if (chunks == 4 || chunks == 8) { + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; + } else { + return -EIO; + } + } + + return ret; +} + +static const struct nand_controller_ops davinci_nand_controller_ops = { + .attach_chip = davinci_nand_attach_chip, +}; + static int nand_davinci_probe(struct platform_device *pdev) { struct davinci_nand_pdata *pdata; @@ -658,7 +756,7 @@ static int nand_davinci_probe(struct platform_device *pdev) return -EADDRNOTAVAIL; } - info->dev = &pdev->dev; + info->pdev = pdev; info->base = base; info->vaddr = vaddr; @@ -708,97 +806,13 @@ static int nand_davinci_probe(struct platform_device *pdev) spin_unlock_irq(&davinci_nand_lock); /* Scan to find existence of the device(s) */ - ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL); + info->chip.dummy_controller.ops = &davinci_nand_controller_ops; + ret = nand_scan(mtd, pdata->mask_chipsel ? 2 : 1); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); return ret; } - switch (info->chip.ecc.mode) { - case NAND_ECC_NONE: - pdata->ecc_bits = 0; - break; - case NAND_ECC_SOFT: - pdata->ecc_bits = 0; - /* - * This driver expects Hamming based ECC when ecc_mode is set - * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to - * avoid adding an extra ->ecc_algo field to - * davinci_nand_pdata. - */ - info->chip.ecc.algo = NAND_ECC_HAMMING; - break; - case NAND_ECC_HW: - if (pdata->ecc_bits == 4) { - /* No sanity checks: CPUs must support this, - * and the chips may not use NAND_BUSWIDTH_16. - */ - - /* No sharing 4-bit hardware between chipselects yet */ - spin_lock_irq(&davinci_nand_lock); - if (ecc4_busy) - ret = -EBUSY; - else - ecc4_busy = true; - spin_unlock_irq(&davinci_nand_lock); - - if (ret == -EBUSY) - return ret; - - info->chip.ecc.calculate = nand_davinci_calculate_4bit; - info->chip.ecc.correct = nand_davinci_correct_4bit; - info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; - info->chip.ecc.bytes = 10; - info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; - info->chip.ecc.algo = NAND_ECC_BCH; - } else { - /* 1bit ecc hamming */ - info->chip.ecc.calculate = nand_davinci_calculate_1bit; - info->chip.ecc.correct = nand_davinci_correct_1bit; - info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; - info->chip.ecc.bytes = 3; - info->chip.ecc.algo = NAND_ECC_HAMMING; - } - info->chip.ecc.size = 512; - info->chip.ecc.strength = pdata->ecc_bits; - break; - default: - return -EINVAL; - } - - /* Update ECC layout if needed ... for 1-bit HW ECC, the default - * is OK, but it allocates 6 bytes when only 3 are needed (for - * each 512 bytes). For the 4-bit HW ECC, that default is not - * usable: 10 bytes are needed, not 6. - */ - if (pdata->ecc_bits == 4) { - int chunks = mtd->writesize / 512; - - if (!chunks || mtd->oobsize < 16) { - dev_dbg(&pdev->dev, "too small\n"); - ret = -EINVAL; - goto err; - } - - /* For small page chips, preserve the manufacturer's - * badblock marking data ... and make sure a flash BBT - * table marker fits in the free bytes. - */ - if (chunks == 1) { - mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); - } else if (chunks == 4 || chunks == 8) { - mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); - info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; - } else { - ret = -EIO; - goto err; - } - } - - ret = nand_scan_tail(mtd); - if (ret < 0) - goto err; - if (pdata->parts) ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts); else @@ -815,11 +829,6 @@ static int nand_davinci_probe(struct platform_device *pdev) err_cleanup_nand: nand_cleanup(&info->chip); -err: - spin_lock_irq(&davinci_nand_lock); - if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) - ecc4_busy = false; - spin_unlock_irq(&davinci_nand_lock); return ret; }
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Also change the unused "struct device *dev" parameter of the driver structure into a platform device to reuse it in the ->attach_chip() hook. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/davinci_nand.c | 195 +++++++++++++++++++----------------- 1 file changed, 102 insertions(+), 93 deletions(-)