diff mbox series

[v3,1/3] dt-bindings: PCI: mediatek: Add YAML schema

Message ID 20200927074555.4155-2-jianjun.wang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series PCI: mediatek: Add new generation controller support | expand

Commit Message

Jianjun Wang (王建军) Sept. 27, 2020, 7:45 a.m. UTC 
Add YAML schemas documentation for Gen3 PCIe controller on
MediaTek SoCs.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
---
 .../bindings/pci/mediatek-pcie-gen3.yaml      | 126 ++++++++++++++++++
 1 file changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml

Comments

Philipp Zabel Sept. 28, 2020, 8:16 a.m. UTC | #1 
On Sun, 2020-09-27 at 15:45 +0800, Jianjun Wang wrote:
> Add YAML schemas documentation for Gen3 PCIe controller on
> MediaTek SoCs.
> 
> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
>  .../bindings/pci/mediatek-pcie-gen3.yaml      | 126 ++++++++++++++++++
>  1 file changed, 126 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> new file mode 100644
> index 000000000000..c7b5dd132ebd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> @@ -0,0 +1,126 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Gen3 PCIe controller on MediaTek SoCs
> +
> +maintainers:
> +  - Jianjun Wang <jianjun.wang@mediatek.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: mediatek,mt8192-pcie
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ranges:
> +    minItems: 1
> +    maxItems: 8
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 2
> +
> +  reset-names:
> +    anyOf:
> +      - const: mac-rst
> +      - const: phy-rst

The "-rst" suffix seems redundant. Unless these are exactly the names
used in the documentation, I'd just call them "mac" and "phy".

regards
Philipp
Rob Herring (Arm) Sept. 28, 2020, 5:29 p.m. UTC | #2 
On Sun, Sep 27, 2020 at 03:45:53PM +0800, Jianjun Wang wrote:
> Add YAML schemas documentation for Gen3 PCIe controller on
> MediaTek SoCs.
> 
> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
>  .../bindings/pci/mediatek-pcie-gen3.yaml      | 126 ++++++++++++++++++
>  1 file changed, 126 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> new file mode 100644
> index 000000000000..c7b5dd132ebd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> @@ -0,0 +1,126 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Gen3 PCIe controller on MediaTek SoCs
> +
> +maintainers:
> +  - Jianjun Wang <jianjun.wang@mediatek.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: mediatek,mt8192-pcie

Don't need 'oneOf' with only 1 entry.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ranges:
> +    minItems: 1
> +    maxItems: 8
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 2
> +
> +  reset-names:
> +    anyOf:
> +      - const: mac-rst
> +      - const: phy-rst
> +
> +  clocks:
> +    maxItems: 5

Need to define what the clocks are and order.

> +
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-parents:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  interrupt-controller:
> +    description: Interrupt controller node for handling legacy PCI interrupts.
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 0
> +      '#interrupt-cells':
> +        const: 1
> +      interrupt-controller: true
> +
> +    required:
> +      - '#address-cells'
> +      - '#interrupt-cells'
> +      - interrupt-controller
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - ranges
> +  - clocks
> +  - '#interrupt-cells'
> +  - interrupt-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie: pcie@11230000 {
> +            compatible = "mediatek,mt8192-pcie";
> +            device_type = "pci";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            reg = <0x00 0x11230000 0x00 0x4000>;
> +            reg-names = "pcie-mac";
> +            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
> +            bus-range = <0x00 0xff>;
> +            ranges = <0x82000000 0x00 0x12000000 0x00 0x12000000 0x00 0x1000000>;
> +            clocks = <&infracfg 40>,
> +                     <&infracfg 43>,
> +                     <&infracfg 97>,
> +                     <&infracfg 99>,
> +                     <&infracfg 111>;
> +            assigned-clocks = <&topckgen 50>;
> +            assigned-clock-parents = <&topckgen 91>;
> +
> +            phys = <&pciephy>;
> +            phy-names = "pcie-phy";
> +            resets = <&infracfg_rst 0>;
> +            reset-names = "phy-rst";
> +
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0x7>;
> +            interrupt-map = <0 0 0 1 &pcie_intc 0>,
> +                            <0 0 0 2 &pcie_intc 1>,
> +                            <0 0 0 3 &pcie_intc 2>,
> +                            <0 0 0 4 &pcie_intc 3>;
> +            pcie_intc: interrupt-controller {
> +                      #address-cells = <0>;
> +                      #interrupt-cells = <1>;
> +                      interrupt-controller;
> +            };
> +        };
> +    };
> -- 
> 2.25.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
new file mode 100644
index 000000000000..c7b5dd132ebd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -0,0 +1,126 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt8192-pcie
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    anyOf:
+      - const: mac-rst
+      - const: phy-rst
+
+  clocks:
+    maxItems: 5
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+      '#interrupt-cells':
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ranges
+  - clocks
+  - '#interrupt-cells'
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@11230000 {
+            compatible = "mediatek,mt8192-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x00 0x11230000 0x00 0x4000>;
+            reg-names = "pcie-mac";
+            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0x00 0x12000000 0x00 0x12000000 0x00 0x1000000>;
+            clocks = <&infracfg 40>,
+                     <&infracfg 43>,
+                     <&infracfg 97>,
+                     <&infracfg 99>,
+                     <&infracfg 111>;
+            assigned-clocks = <&topckgen 50>;
+            assigned-clock-parents = <&topckgen 91>;
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy";
+            resets = <&infracfg_rst 0>;
+            reset-names = "phy-rst";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                            <0 0 0 2 &pcie_intc 1>,
+                            <0 0 0 3 &pcie_intc 2>,
+                            <0 0 0 4 &pcie_intc 3>;
+            pcie_intc: interrupt-controller {
+                      #address-cells = <0>;
+                      #interrupt-cells = <1>;
+                      interrupt-controller;
+            };
+        };
+    };